|
|
| Electronic local p0wer source to Seams for thread from 1 to 10 milimeter of diameter Produced in 3 series for thread until 3 10 milimeter until 6 and milimeter Execution to 2 to 4 or 6 seams 120 diameter milimeter in tandem Set in action from reducer to screw and servomotore brushless possibility to program ripetibili various lengths n. times possibility to bind together series of raddrizzafili more seams to second of the diameter of the thread to make to be left over. Speed max 120 meters to the first one, precision of positioning 0.1 milimeter Facility of installation and interfacciamento with whichever machine. |
|
SERVO-ROLL FEEDER SRF-100
• Strip thickness until 4 mm. • The feed rollers are Ø 100 mm hardened 62 Hrc and ground with a 0.50 micron surface finish. • The lower roll is directly driven by gear box. • The upper roll is connected by 4 gears. • Speed reducer with low gap (3’ degree), ratio 1:7 for 125 m/min. or 1/10 for 90 m/min. • Pressure to the upper roller by two pneumatic cylinder Ø 100 with indipendent pressure release. • You can open the upper roll at every stroke at 150 spm with angle 50°. • The material is positioned in the feeder by 4 guides, these can be used to auto center the strip together with the ability to adjust the material off center if required. • Feed roller with 3 lower roll and 1 upper roll. • Support square with 150 mm of adjustment by manual hydraulik crick. • Brushless servomotor 8-12-15 Nm. • Digital servo driver with integrated positioning system. • Operator panel with the possibility to program 99 programs of 5 different steps repeat nr. times. • Programmable feed length from 1 mm to 999,99 mm. • Feed accuracy 0.04 mm. • Pendant control for manual commands. // Options: • Pilot release with servomotor up to 300 pulse. • Measure wheel with encoder 5000 impulses. • Synchro with the press by absolute encoder mounted on the press main shaft. • Programmable exit for drive the electrovalve 24VDC for a die selector. • Little straightener with 5 free rolls Ø 50 mm. • ZIG ZAG execution for cut the disc on different lines. |
|
RTE ROTARY ELEVATOR
The Rte rotary elevator unit can be used in automations to slave manufacturing machines during pallets handling on automatic assembly lines or on machine tools as pallets changing.
It can be moved in two independent ways:
Indexed rotation carried out through a cam activated by a self-braking gear motor with a number of required stations varying from 2 to 48
Lifting carried out using a pneumatic cylinder having a maximum stroke equal to 50 mm.
The RTE unit is made up of a steel plate supporting a rotary table with a cam activated by a self – braking gear motor and controlled by a FCR micro switch.
Inside the rotary table there is a special pneumatic cylinder vertically moving an aluminum plate on which the needed equipment can be fixed.
The RTE rotary elevator unit is standard built with 2 main sizes:
RTE 06 P with a maximum capacity of 150 kg and compressed air pressure of 5 kg/cm²
RTE 06 P with a maximum capacity of 300 kg and compressed air pressure of 5 kg/cm² |
|
Metalfab's ruggedly built MetaTech Feeder features a compact, space-saving design, low maintenance direct drive, and new Delrin® bushing for highly accurate and dependable metering of powders, pellets, flakes, and agglomerates.
Features/Benefits
NEW - Only 2 moving parts (Drive and Screw)
- ensures reliable, long lasting performance with minimal process downtime
NEW - O-Ring Sealed Inline Drive
- ensures dust-free operation and makes screw shaft alignment easy after changeout or cleaning.
Teflon® Rear Seal Standard
- for years of maintenance-free service. Also available with cinch seal
Unique Agitator/Conditioner Screw
- completely fills the feed screw for high accuracy of ± 1 to 1 1/2%
Interchangeable Screw/Tube Combinations
- available in 1/2" to 6% sizes and permit feed rates from 0.05 to 550 cu. ft./hr.
Wide Range of Models
- includes space-saving mini, sanitary, and combination feeder/conveyor units
All Metalfab Volumetric Screw Feeders feature Metalfab's rugged design and unique agitator/conditioner screw. In operation, the agitator/conditioner screw begins to move materials forward in the feeder's trough. Since the agitator/ conditioner screws are larger in diameter than the metering (feeding) screw and of wire configuration, they carry a greater capacity than the metering screw, allowing material to flow through and around it. This 360° influence of material forces entrained air up and out of the metering area and force feeds material into the flights of the metering screw to ensure they are completely full with uniformly dense material. |
|
FULLY AUTOMATED
The Magic bar feeder has been designed for machining bars with diameters of between 8 and 110mm, with a maximum length of 1600 and a minimum length of 200 mm.
The MAGIC self-adjusts to the bar diameter selected on the PLC.
The maximum workable lenght of the bar is equal to the lathe spindle lenght. |
|
The tank and the blade are out of stainless steel.
The depth and the beat of the blade adapt automatically to the level of filling, in order not to brew the components unnecessarily. Good resistance to clogging.
Ideal for the coated components, painted, or of which surface treatment polluting east.
High rates. (For example 5000 parts/hour for a screw M4x30.) Capacity ZSE 151: 1,5l.
Possibility of adding a hopper great capacity.
Mechanical selector Weber.
System in advance on rail without silentblocs. Balanced linear rail: few transmitted vibrations, low noise level.
The system makes it possible to distribute components without head. Management integrated for distribution alone, or distribution and unit of screwing (of installation). |
|
The patented clamp feeder VEGA Bialternato® has unique characteristics that put it at the top in terms of precision and versatility.
Using CNC grippers means that all materials, even the most delicate, with thickness ranging from 0.2 to 2mm, can be processed mar-free. |
|
| The wide range of standard press feed line equipment we have developed, enables us to offer "turnkey" production lines. Based on this experience we also supply individual pieces of equipment such as decoilers, straighteners, feeders, shearing units, etc. |
|
Decoiler Unwinder for Yarn
Constructed in 5 largenesses with capacity from 1 to 5 tons
Autoregolabile speed from balerino analogic
Screw reducer with built-in limiter
AC motors fed from inverter
Suit of protectors anti industrial accident researches
Vertical, also at call ribaltabile axis of 90°
Tiny speed max till 100 meters/
It guarantees an feeding of the yarn without tears |
|
Feeding Technology Components
Afag is your worldwide presented partner for high quality feeding technology with innovative products, customized solutions and excellent service.
Linear conveyors
* innovative KLF
* conventional LF
* conveyor belt FB
Feeder bowl drives
* innovative feeder drives
* conventional feeder drives
Feeder bowls
* plastic
* aluminium
* stainless steel
Refilling units
* Conveyor belt hopper
* Vibratory hopper
Control devices
* Type SE
* Type IRG
Standard feeding station
|
|
| Eriez offers a complete line of vibratory equipment to convey, screen and feed materials in quantities ranging from a few spoonfuls to tons per hour. If the many standard systems available are not quite right for your operation, Eriez' Technical Center can develop custom-designed vibratory and screening equipment to precisely meet your needs. |
|
Eriez offers a complete line of vibratory feeders for materials in quantities ranging from a few spoonfuls to tons per hour. If the many standard systems available are not quite right for your operation, Eriez' Technical Center can develop custom-designed vibratory and screening equipment to precisely meet your needs.
Small
Light and medium-duty feeders accurately feed and control material flows at rates ranging from pounds to many tons per hour. Totally enclosed magnetic drives. Low power consumption. AC operation.
High Speed
Exceptionally high-speed feeding of light, bulky materials.
High Deflection
handle powders and leafy products that normally could not be fed successfully in an electromagnetic feeder.
Heavy-duty
large capacity and difficult material handling operations up to 850tph (765mtph)
Mechanical Feeders and Conveyors
Low-horsepower, high-capacity mechanical feeders handle bulk materials in volumes up to 2250tph (2040mtph).
Conveyors - Single Mass and Mechanical Tuned Two-Mass
Volumatic Feeder Machines
Made up of a hopper, vibrator, feeder and controls. Assures accurate flow of dry bulk materials for weigh scales, packaging and bagging equipment, small batch operations and additive feedings. |
|
| Adjustable flows from 0 to 10 tonnes/hour according to the choice of the electromagnetic feeder. |
|
Ranging from the extra heavy-duty stationary models to the most flexible feeders for mobile applications, Metso Minerals feeders offer minimum downtime and maximum tonnage for thousands of installations around the world. Our feeders feature a rugged yet flexible design, extra heavy-duty construction, exclusive vibrator technology and ease-of field-changes in grizzly opening and deck-slope.
Metso Minerals feeder series is designed particularly for continuous use with any hard and abrasive materials. They combine a robust frame design with
high feeding capacity and a limited overall height. These features make it ideal for operation in restricted space, and in both stationary and mobile plants. |
|
Winding and Unwinding many Materials, NITTOKU`s original Wire Feeding and Wire Reeling Machines!
Displayed Machine: SVT-02
Wire feeding machine :
The Feeding machine feeds a wire at competent tension depending on the material.
New type of wire feeding mechanism has tension parameter feedback function! This has made SVT-02 series suitable for the material that has the character of strong tension and easy stretching.
Ex. Belt cord, Litz wire, Electric wire etc…
Wire reeling machine :
The Wire reeling machine provides layer winding by the new software for layer winding.
Materials :
+ Metal Group : Gold, Silver, Copper, Platinum, Tungsten, Stainless, Aluminum, Steel wire, Welding wire, Solder wire, Copper foil, Aluminum foil, etc.
+ Resin Group : Fishing line, Belt core, Air tube, Electric line, Resin fiber etc.
+ Others : Glass fiber, Fiber yarn, Carbon fibre, Paper, Cloth, Film, Wrap film, Adhesive tape, Nonwovon fabric, Elastic film, Metalic thin film, Hard film, etc.
Form :
+ Round wire, Rectangle wire, Ribbon wire, Twisted wires, Clad wire, Sheet, Film etc. |
|
CWF-10B COLD WIRE FEEDERS:
Our most popular model, available with either a two or four roll drive system. The unit is designed for mechanized applications and is supplied complete with a wire guide positioner and control.
CWF-20C PRECISION COLD WIRE FEEDER:
Has all the features of the CWF-10B but utilizes a high accuracy drive motor and control with closed loop feedback to maintain the wire feed speed to within ±0.1% of the rated speed. Four drive rolls and a clear wire spool cover are standard features.
HWP-50D HOT WIRE FEEDER:
The hot wire system is used where high deposition combined with high quality are needed. Used with the GTAW (TIG) or Plasma process, the wire is preheated before it enters the weld pool. The system can be used for the surfacing or the joining of heavy materials in most ferrous alloys, including exotic materials. |
|
K210-2 NA-3S Automatic Wire Feeder
Improve productivity with the NA-3 automatic wire feeder. This system has been specially designed to deposit more weld metal at faster travel speeds which eliminates bottlenecks and cuts costs.
Used for heavy duty fabrication and assembly line production, the NA-3 units feature solid state controls for precise control of welding procedures - even to the most exacting requirements. Trust Lincoln automatic welding systems for worry-free operation! |
|
Pre- and post processing equipment such as prefeeding machines (dereeler and puller-type), wire marking / inkjet printing, fully synchronized cable coilers and wire stackers. Full integration with Schleuniger automatic cutting machines and automatic cut & strip machines.
In a production line, tension-free feeding of a cable or wire is important for optimum processing results. Schleuniger offers a vast range of prefeeding machines for various spool (reel) weights and dimensions. |
|
The Cattaneo STRAIGHTENERS have been designed to straighten materials of various thicknesses depending upon the model selected.
IIn the standard version, the loop is controlled by a proximity detector which functions as a start and stop control at he end of the preset time.
An additional switch is provided to protect from a tight loop emergency. |
|
| • Strip thickness from 0.8 to 4 mm. • Support frame in welded iron pipes. • 2 rolls Ø 120 mm synchronized by a series of hardened gears. 1 deformation rolls Ø 90 mm - holded up by lower rolls with wheelbase 360 mm to deform a strip thickness of 5 mm - regulated by a handwheels. 5 lower rolls Ø 60 mm synchronized by a series of hardened gears running in oil bath - 4 upper rolls Ø 60 mm adjustable in inlet and outlet position. • The vertical displacement of the straightener is adjusted by 4 screws with 2 manually operated handwheels (optional motorised). The position of the straightening rollers is shown by two micrometer comparators. |
|
| The HS 30 workpiece handling system has been developed for small and medium-sized workpieces up to 40 kg. Workpieces are loaded and unloaded from the HS 30 handling system to the C 30/C40 Hermle machining centers the use of a programmable controller. |
|
IL loader equipped with 9 or 18 floors for the automatic replenishment of the UltraSpeed
machine with printed circuits |
|
| ... products without technical information |
| |
|
|
Machine feed
