|
|
CNC vertical sawing machines, with HSS circular blade, to cut steel solids and sections up to 180 mm diameter
|
|
| The cutting process, with the precision cut-off saw takes longer than with the normal abrasive cutters, because of the low speed. The sample is fixed to its support and put on the wafering blade, then it will be sectioned without altering its structure, thanks to the combination of the force of gravity with the variable loads applied. |
|
Depending on your needs in terms of pipe size, chamfering, extrusion speed, cutting length, frequency of cut and cutting length, American Maplan offers upstroke saws, planetary saws and pipe cutting systems
Planetary saws are especially suited for thick-walled and large diameter pipes
Pipe cutting device designs will cut up to 80mm
|
|
YVROUD propose different types of cutting units : guillotine, saw cutting, knife cutting ... According to application and product, the motion is realised by pneumatic, hydraulic or servo motor system.
YVROUD warranties you an adapted solution to your need.
An assembled and tested equipment before delivery on site.
OPTIONS:
· Increase of the cutting capacity
· Remote control with extrusion line
· Adapted shapes for knife and guides
· Only one frame for haul-off and cutting units
· Special configurations... |
|
The MTV 125 is a part of a modern profile extrusion line and widely accepted in profile manufacturers facilities
As the profile moves through the unit, a knife blade cuts from top to bottom
The cutting surface will not be deformed due to a light preloading
Low noise emission
The MTV 125 is offered with two actuator options, pneumatic and electronic. For exceptional tolerance control, the electronic actuator model is recommended
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we cut it !
Further saws, like Table saws, Mitre saws, Double mitre saws, Notching saws, Vee-notch and cut off saws, Automatic saws and Automatic saws with pusher cover our product range. |
|
Fully automatic sawing system
up to 6" thick material
Cuts all types of Ferrous Metals
Flood Coolant
50 HP Arbor with Variable Motor
Precision Tolerances to +/-0.0007
Surfaces Finishes to 16 Micro-inch
Hydraulic Clamping on both sides of cut
Eliminate subsequent machine of cut parts
Fast set up and part number memory
Rapid sawing speeds
Full size touch screen operato interface
PLC Controls by Allen Bradley PLC
Easy Blade Change |
|
You cannot afford to risk any cut-off compromise? DREISTERN cut-off machines operate with every type of cutting process. Whether you wish to use saw units, shear units or punch units, you simply exchange the cut-off unit and you immediately have the ideal cutting process at your disposal. It is not important whether you require fixed tube or profile lengths or frequently changing lengths.
You will certainly appreciate the high cut-off precision. You will discover one particular characteristic after many years. DREISTERN machines never seem to age. They are designed and built to endure many years of hard work. |
|
CONDOR 90 CNC HR electropneumatic automatic sawing machine to cut aluminium and light alloys, using a widia blade.
Besides in the automatic mode, it can be used also in semi-automatic cycle.
CNC machine with multimicroprocessor so as to obtain at 0°, on the same bar,32 different lots each of different lengths and quantities. The machine is supplied predisposed to operate together with the loading magazine CB 6000 for high production.
A FEW FEATURES:
2 pole motor at 2800 rev/min with double belt transmission
Widia blade with electrowelded hard metal plates diameter 300x32x3.2mm Z72 positiv rake, balanced and silenced.
Cabinet for electric and electronic fixtures with totally identifiable wiring.
Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
Control and function systems protected against in-going and/or out-going electrical and electromechanical phenomena.
DISPLAY: 40 characters read on sixteen lines so as to visualize technological parameters such as:
- number of cuts programmed and carried out
- blade thickness - length fed in each stroke
- cutting time
- ampermeter
- diagnostics and/or caution messages (approx.ly 80) visualized in the language of use.
Feeding system by means of screw/nut with recirculating balls and stepper motor, length 1000mm with feed in up to 9000 mm/min.
Minimum restpiece which cannot be fed in in automatic is 70mm.
Feeder carriage which has a sideways movement so as to feed in also deformed bars.
Automatic adaptive shearing stress control system with servovalve mounted directly on the cylinder.
Automatic device for blade lubrication which operates only while cutting.
Drawer to collect chips.
Chip conveyor is predisposed to mount a chip collector.
The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel.
Acoustic indicator with flashing light in case cycle is stopped.
Machine predisposed for handling with movement equipment.
Service keys and instructions manual, for maintenance and spare parts list.
|
|
| The low speed saw C100 belongs to the small manual cutting machines family, well known for their high precision in cutting small dimension samples; this is an essential requirement for all laboratories, where the quality of results is a decisive factor: the sample structure must be preserved from any damage which could compromise the following microscopic examination. |
|
Board divide center Logicut. New screen operating with touch screen.
Type 2000
cutting length on request |
|
FOR DEMANDING PROFESSIONAL WOODWORKERS AND SMALL TO MEDIUM INDUSTRIES
SC 450, NEW CIRCULAR SAW WITH TILTING BLADE FROM CASADEI
SC 450 is the new circular saw from CASADEI, a well known and long-established company which boasts broad experience in the woodworking machines field.
Simple, fast and precise SC 450 is offered as a solution either for demanding professional woodworkers or for small to medium industries.
The CASADEI SC 450 circular saw mounts a brand new sliding table with a sliding system running on ground and hardened steel guides, fixed through a mechanical bending system where no glue is used. The on-off switches for the blades can be integrated, as option, into the sliding table end: this guarantees a more functional use, especially during the panel loading operations.
The sliding table can be locked in any position along its length.
Furthermore the sliding table mounts a large-size squaring frame supporting work pieces, which is easy to remove in case of smaller size work pieces machining.
The SC 450 is equipped with a new cast iron saw unit, which slides vertically on smooth and precise round bars system.
The saw unit can tilt up to 45° on two solid cast iron trunnions, in the shape of a crescent.
The main blade maximum cutting height is up to 150 mm, even for solid wood machining, and can cut at 3 speeds: 2500-3500-5000 revolutions per minute.
Upon request, this CASADEI machine can be equipped with an electronic programmer controlling all the axis:
- saw blade lifting and tilting
- parallel fence adjusting
- scoring blade lifting and alignment |
|
Universal combined machine 350 mm
Elite Serie: the Combined Machines for the professional woodworker. Technology, design, innovation and quality: 100% made in Italy. The Universal Combined Machines of the Elite Serie represent the TecnoMax solution for the handcrafts who are looking for a compact machine without renouncing a top quality end product. The rapid machining changeover, the possibility to compose the machine according to the ones requirement, and the same performance of the single-machining models are the main qualities which characterize this new range.
The new saw unit is made of a strong cast-iron structure. It is tightly fixed under the table and can be tilted by means of two side supports (trunnions): these solutions grant sturdiness, rigidity and a perfect cutting result. Furthermore, on request, the unit can be equipped with scoring unit for an optimal cutting even on upgraded panels. The sliding table is made from extruded anodised aluminium with a closed, honeycomb structure. The carriage runs on an exclusive slideway system consisting of guides made from calibrated and hardened F550SX steel. The spindle moulder unit is designed to provide the maximum stability and rigidity under all working conditions. Top performance features include: a large-size, cast-iron moulder spindle; a large distance (230 mm) between the two bearings on the moulder spindle; the possibility to mount tools at a minimum distance (5 mm) from the first bearing. |
|
Cuts up to 8 in (200mm) in Thickness
Precision Tolerances to +/-0.002 in (0.05mm)
Surface Finish to 20 micro-inch (0.5 micro-meter)
Fast Set Up and 650 Part Memory Allen-Bradley 1394 AC
Motion Control System
Touch Screen Controls
Optimize Cutting With a PC Based Windows Program
Stack Material Vertically and Horizontally to 8in (200mm)
Load Material from Front, Back or Topy |
|
Fully automatic sawing system
4" to 10" thick material
Eliminate subsequent machine of cut parts
Material handling options for loading and unloading
Cuts extrusions, tubes or rounds
Precision positioning tolerances to +/- 0.003 or 0.005
20 or 30 HP Arbor Motor
Universal Clamping for single or bundle cutting
Touch screen operator interface
Digital AC motion control system from Allen Bradley PLC
Multiple simultaneous cutting
Easy Blade Change |
|
Fully automatic sawing system
4" to 12" thick material
30 or 50 HP Arbor Motor
Precision Tolerances to +/-0.002"
Surface Finishes to 8 Micro-inch
High speed close tolerance cutting
Eliminate subsequent machine of cut parts
Fast set up and part number memory
Rapid sawing speeds
Full size touch screen operator interface
PLC Controls by Allen Bradley PLC
Easy Blade Change |
|
V-CUT
CNC cutting centre with 3 controlled axes, designed for cutting profiles made of
aluminium, PVC, light alloys in general. V-Cut loads the extruded section and cuts it, then unloads the finished part all in fully automatic mode without need for operator
attendance.
The powerful and versatile software can handle predefined cutting lists, optimizing them to minimize wastage. The cutting head allows cutting at +/- 22°30' and intermediate angles. |
|
For Straight & Mitering Cuts of Tubes, Sections, Bars
Cuts Steel & Nonferrous Metals at 54 & 108 RPM
or Stainless Steel & Steel at 27 & 54 RPM
For H.S.S. Saw Blade of Ψ 350 mm
Reliable Automatic Downfeed System
Pneumatic Control System
Double Air Vise System
Gears For Full Time Operation
2-Piece Safety Guard System
Plain Mitering Table 45°- 0°- 45°
Water Coolant System
Spray Mist Available
Cutting Range:
Round Tube 120 mm (4.75")
Section 170x60 mm (6.5"x2.5")
Square (solid) 60 mm (2.5") |
|
Slow Speed Cold Saw for Production and Metal Construction
Heavy construction worm & wheel gears for full time operation. Large, plain table, double yoke pivot system.
Precision mitering cuts through 45°-0°-45°. Cabinet base, coolant system.
3-phase motor. A slow speed motor for stainless steel and UNIST spray mist system are available. |
|
K12-14MS, Metallurgical saw, 14" abrasive wheel. Great for Met labs! Contain the dust!
5 HP, 3 PH 1725 RPM TEFC motor.
External manual operation.
Dual moveable 4" screw vises.
Capacity 2-1/2" solid, 3" shapes.
Magnetic switch, low-voltage protection at switch, 24V.
Internal halogen light - 24V.
1" wheel arbor, 12" or 14" blade, (not included)
Dual coolant nozzles.
2200 spindle speed at 1725 RPM.
Flood coolant, 10 gal., 1/3 HP.
Dimensions L 39" x W 26" x H 60"
Enclosed wet cutting metallurgical saw.
Options: Power down feed #PH-14, Oscillation for large sections # OSC-14, door interlocks.
700 lbs. |
|
| ... products without technical information |
| |
|
|
Sawing machines, Cut-off machines: 
