|
|
TK 139
Radial single-head saw machines
Construction Features
Blade dia 1000 mm to get very good cutting capabilities
Full protection with complete cover and front automatic lowering closure
Strong cast iron head
It cuts at 90°
Blade motor operated by industrial inverter
Spray lubrication
Oleo dynamics vertical/horizontal supplier of clamps
Possibility to equip the machine with loading/unloading roller table
TK 137 - TK 138
Single-head cutting machine with upwards blade
Blade dia 600 mm to get very good cutting capabilities
Oleo-pneumatic blade upstroke
Spray lubrication
Full protection with complete cover
Chips collection drawer
Optional
RH side tables 801/E, 801/D, 802/M, 802/F
LH loading tables 802/SX, 85400 (only for TK 138)
Pusher (only for TK 138)
TK 137 For all cuts between 20°/90°/-20°
TK 138 It cuts at 90°. If associated to a pusher it can execute in-sequence cuts |
|
electro-hydraulic and/or electro-pneumatic band saws designed to cut solids and sections up to 330 mm from 45° right to 60° left
|
|
| 2-column-linear guided automatic metal bandsawing machine for straight cuts. Suitable for high professional production industries and steel stockholders. For fast cutting of tough materials. User friendly NC contol system with clear text message professional display. |
|
650 SCA/E
Single-head, rising blade cutting-off machine, with N/C automatic rotation of the vertical axis through Dc motor specifications and contemporaneous hydraulic tilting of the horizontal axis. Cutting with angular settings from 90° to 22°30’ (left and right) on the vertical axis and from 90° to 35° (right only) on the horizontal axis. Equipped with digital position readout for the horizontal axis. |
|
AUTOMATICA E
Single-head, rising blade cutting-off machine with automatic cycle only for 90° cutting, equipped with N/C electric bar dispenser with positioning tolerance in cutting down to ± 0.05 mm and automatic separator system for cut pieces. |
|
Electropneumatic sawing system with up-feed blade and automatic feeding device
|
|
SA-70NC
Solid Bar Sawing equipment
Shortest 25mm Crop Lengths
SA-70NC – S ( HSS Industrial saw Blade )
SA-70NC – U ( TCT Saw Blade )
SA-70NC – NF ( Non-Ferrous )
The new SOCO SA-70NC sawing machines incorporates the newest technology with unparalleled functions. This revolutionary innovation brings you the shortest crop length available in the global market: 25mm (SOCO Global Patent). With capacity up to 70 mm in solid bar and tube cutting, it is guaranteed to bring you continuous savings and production.
Machine Features:
• 25mm – The shortest Crop Length of any machine available in the market (SOCO Global Patent)
• With the shortest crop lengths, the SA-70NC brings maximum material savings and more production
• Using a thinner and smaller TCT saw blade, there is lower initial investment in blade and long term savings in material
• HSS Industrial saw blades may also be used, with standard built-in settings and industrial cooling system, for even more savings on tube cutting
• TCT Saw Blade for maximum speed and performance in tube and bar cutting
• Superior Speed : O.D.40mm Copper solid bar, L = 56.5mm,cycle time is 3.7sec
• Long Blade Life: Superior design provides “ 0 ” backlash and unparalleled saw blade life
• Accuracy and Precision
- Electric Servo Feeding
- Floating Feeding Carriage to ensure precise feeding and cutting lengths
• 6.5 Meters Tube and Bar Loading Magazine
(- Manufacturers of circular saw - Sawing Machine - Cutting machine manufacturer - Deburring - Tube End Finishing, Bender Tube, bender Pipe, Cutting, Bevelling machines, Deburring machines, CNC Tube and Bar Machining center manufacturer, HSS saw Blade ) |
|
1. Built-in sawblade for low noise and safety operatoin.
2. Maximum thickness of cut 10~32 cm.
3. Equipped with 12cm rubber clamping pad to avoid damage.
4. Single or multiple workpiece can be cut at a time.
5. Infeed fence ensures high cutting accuracy. |
|
Technical specifications:
Max support 180 Kg
Air network for pneumatic tools
Pneumatic tilting (0°/85°)
Industrial roller bar kit. Fold-up type
Dim mm 2470x1070x1310h
Max dimensions professional profile to test: mm 1800 x mm 1800 S105
Min. dimensions professional panel 300x300 mm
|
|
* MEBA Profi-Line : Metal-Bandsawing-Machines for straight an mitre cuts in manual, semi automatic or automatic performance.
* MEBA Eco-line : 2 column linear guided Metal-Bandsawing-Machines for straight an mitre cuts in semi automatic or automatic performance |
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we cut it !
Further industrial saws, like Table saws, Mitre saws, Double mitre saws, Notching saws, Vee-notch and cut off saws, Automatic saws and Automatic saws with pusher cover our product range. |
|
Bewo's automatic professional saws are built for strength and stability to guarantee high levels of production and durability over many years. Bewo offers 4 models: the SCF Quatro for high quantities and speed, the FCH, the ECH for heavy profiles and large dimensions, and the DCH, with its unparalleled speed.
|
|
SA-76NC ln-line
EXTREME SPEED TUBE CUTTING + BEVELLING MACHINES
HIGH PRODUCTION, FLEXIBLE AND I2® SYSTEM
SA-76NC
The new SOCO SA-76NC brings you the latest technology in tube cutting systems. Equipped with a 6.5/8.5/12.5 meters BTM ( Bundle Loading Magazine ) and a 2 / 3 / 4.5 meters output gate, the SA-76NC offers unparalleled sawing output for tubes and pipes.
Together with SOCO control system, Touch screen manufacturers and i2® ( Intelligent Interface ) system, the SA-76NC offers precision and versatility, while allowing for quick setup times between different tube dimensions lengths.
SA-76NC in-line
Besides the standard functions of SA-76NC, and the SA-76NC In-line may also be a part of complete Automation Cells for tubing. The working process is from Loading, Feeding, Cutting, Chamfering, Deburring , Air Clearing and Tube Collecting. It brings time saving as well as higher throughput and performance.
(Pipe Benders - Tube Benders - Tube Bending - Pipe Bending - Bending Machine - Tube bending machines - Pipe Bending systems - Circular saw - Sawing equipment - Cutting machines manufacturer - Chamfer - Deburring - Tube End Finishing, Bender Tube, bender Pipe, Cutting, Chamfering Machines, Deburring machines, CNC Tube and Bar Machining center manufacturer, HSS professional saw blades ) |
|
manual, semi-automatic to automatic
Pivot-type Machines
Especially suited for use in job shops. Important characteristics are: small foot print, easy and accurate miter adjustment, excellent cutting performance.
Double Column Machines
For higher demands and materials with tensile strengths up to 1400 N/mm2. The double-column design allows a better application of the needed feed force. Today’s state of technology are bevel spur pinion drives as drive source in connection with a frequency-controlled professional saw motor, maintenance-free supplier of linear guides
Production Sawing machines
Modern control technology with stored cutting data of all current materials. After entry of material-grade and number of pieces, cutting speed and feed rate are adjusted automatically. Machines with carbide blades cut high tensile alloys with tensile strengths up to 1900 N/mm2 economically . Due to a higher blade life and reduced cutting times, an amortization of the higher machine costs is achieved.
Large Bandsawing Machines / Block Bandsawing Machines
To cut plates from large size blocks and plates. Small to very large working ranges and table loads up to 40 tons.
Automatic machines and machines designed for notching available as well.
|
|
Shark 452 CCS, bandsawing machine TO EXECUTE SINGLE CUTS WITHOUT THE NEED OF AN OPERATOR on sections and beams up to 450x330 mm at 0°.
- It is a very versatile machine to cut from 60° left up to 60° right.
- Functioning: after having manually fed the bar and clamped the material, you start the cut which is done using the weight of the head controlled by a spring so as to balance the sawing head. By means of an hydraulic brake with a cock you can regulate the downfeed speed. Once the cut has been finished the sawing head is raised manually so that you can feed the bar again (as OPTIONAL you can have the head which returns to top position by means of an hydraulic unit after each cut).
In the Shark 452 CCS MA model (with an automatic vice) vice opens/closes by means of a button on the control panel.
A FEW FEATURES:
Electric panel (wiring totally identifiable, stand-by, main lockable disconnect switch, pole change switch, emergency stop, motor magneto thermal overload, minimum tension coil, protection against missing phase, low tension safety center 24V).
Mechanical variator to adjust infinetly variable blade speed from 20 to 100 mt/min.
Professional cabinet which can be easily positioned keeping a visual control over the machine.
Manual band tensioning with visualization on LCD by electronic transducer.
Front bandguide with sideways movement on a linear guide with recirculating ballscrews.
Manual clamping system by means of vice screw which professional slides on preloaded linear guides with recirculating ballscrews
Coolant tank inside the steel base and drawer to collect chips which can be replaced with a motorized chip evacuator (OPTIONALS)
Electric pump to lubricate and refrigerate the blade.
Wire chip professional brush for blade cleaning which is driven by the motor pulley.
Adjustable cut to measure device to make cuts of the same length.
Machine predisposed for handling with movement equipment.
Bi-metal band for solids and sections.
Service keys and instructions manual, for maintenance and spare part list.
|
|
A range of bandsaws which combines accurate cuts and high speeds, adapted to all types of profiles used in steel construction.
Internationally well-known for their robustness, accuracy and speed of execution, Behringer industrial saws allow the straight and mitre cut of all types of profiles.
Being a natural additional equipment to our HD fast drilling machines, the drilling sawing line represents the key element of the performance in steel construction workshops.
|
|
SPARTAN PA10, PA13/3, PA18/2
Also available with the Marvel PCII Controller. |
|
Horizontal sawing system to cycle automatic rifle for cut of bars or makes destined onerous intense activities where an elevated productivity is demanded. The sturdier sawing machine to horizontal tape is considered and reliable today in its segment, it guarantees functionality and high productivity.
Besides the installation facility it joins a remarkable precision in the cut thanks to the descent velocity of the variable arc based on the section of the material and to the shear stress. |
|
| 2-column guided metal bandsawing machine for straight and mitre cuts in semi automatic or automatic performance with patented mitre system (DG / DGA) |
|
The user friendly control provide quick set up and control
through a clear easy to read touchscreen. From this screen
the operator can change blade speed, trim cut length, set cut
lengths, job quantities and set the forward/return limits of the
professional saw blade. Up to 9 different jobs can be stored at one time and
can easily be changed or edited.
|
|
- Fully automatic sawing system
- 1/2" to 8" thick material
- From 10" to 5' Circles
- Hydraulic Professional turntable and Clamping Ram
- 20 or 30 HP Arbor Motor
- Precision Tolerances to +/-0.007
- Surface Finishes to 12 Micro-inch
- High Production Sawing Rates
- Rapid sawing speeds
- Eliminates Scribing |
|
The circular sawing machine SC 45 by BELL is a perfect combination for the user who wants to professional saw the wood at the right length before splitting.
It is reliable and compact, a very good compromise among weight, size and log capacity, suitable for every kind of use.
One of the main feature is the wheels which allow to move the SC 45 very easily, another one is the telescopic rod which allow to load even longer wood logs, and the "set-size" rod which let the user saw all logs at the same length. |
|
HORIZONTAL CUTTING BANDSAWS
Bandsawing machines with cutting capacity up to 2500 mm, both automatic and semi-automaticIntegral cutting magazinesShuttle table bandsaw "transfer"Cutting installations with displacing head "GANTRY"
MITRE CUTTING BANDSAWS
Cutting and drilling installations with capacities up to 1200 mm. Complete cutting installations with storage and feed of materials
VERTICAL CUTTING BANDSAWS
Vertical cutting bandsaws with capacities up to 2500 mm. Longitudinal and/or transversal cutting |
|
Advantages when compared with bandsaws:
·Higher cutting performance due to a 5 to 10 times higher feed rate
·Smaller foot print
For cutting sizes over 150 mm, bandsaws are typically more economical.
The differences are:
·Universal industrial saws with vertical from the top or from the bottom of the table coming industrial saw blade, suited also for miter cutting
·Production saws where orders are processed fully automatically without any personnel
·Mass production saws with very high output levels and extremely small cut piece tolerances.
|
|
FOR DEMANDING PROFESSIONAL WOODWORKERS AND SMALL TO MEDIUM INDUSTRIES
SC 450, NEW CIRCULAR SAWING WITH TILTING BLADE FROM CASADEI
SC 450 is the new circular professional saw from CASADEI, a well known and long-established company which boasts broad experience in the woodworking machines field.
Simple, fast and precise SC 450 is offered as a solution either for demanding professional woodworkers or for small to medium industries.
The CASADEI SC 450 circular saw mounts a brand new sliding table with a sliding system running on ground and hardened steel professional guides, fixed through a mechanical bending system where no glue is used. The on-off switches for the blades can be integrated, as option, into the sliding table end: this guarantees a more functional use, especially during the professional panel loading operations.
The sliding table can be locked in any position along its length.
Furthermore the sliding table mounts a large-size squaring frame supporting work pieces, which is easy to remove in professional case of smaller size work pieces professional machining.
The SC 450 is equipped with a new professional cast iron saw unit, which professional slides vertically on smooth and precise round professional bars system.
The saw unit can tilt up to 45° on two solid cast iron trunnions, in the shape of a crescent.
The main blade maximum cutting height is up to 150 mm, even for solid wood machining, and can cut at 3 speeds: 2500-3500-5000 revolutions per minute.
Upon request, this CASADEI machine can be equipped with an electronic professional programmer controlling all the axis:
- professional saw blade lifting and tilting
- parallel fence adjusting
- scoring blade lifting and alignment |
|
|
|