|
|
The circular sawing machine SC 45 by BELL is a perfect combination for the user who wants to saw the wood at the right length before splitting.
It is reliable and compact, a very good compromise among weight, size and log capacity, suitable for every kind of use.
One of the main feature is the wheels which allow to move the SC 45 very easily, another one is the telescopic rod which allow to load even longer wood logs, and the "set-size" rod which let the user saw all logs at the same length.
|
|
High performance cut-off units
You will obtain from us the most suitable cut-off units according to the profile or tubing form, material and line speeds.
Special merits: Outstanding cut-off quality and high cutting speeds.
High-Speed profile cut-off machine with synchronous linear motor
The TK 123.20 LA is designed for a flying operation in rollforming and tube welding installations with high rollforming speed or high part output. It is especially suitable for cutting small and thin-walled profiles and tubes with particular cutting quality. It achieves for example a speed of 200 m/min cutting aluminium window spacer bar profiles. Cutting short profiles a part output up to 100 parts per minute and more can be reached. The machine is also suitable for punching of profiles in flying operation. Cutting and punching can be done in combined or single mode.
|
|
AUTOMATICA E
Single-head, rising blade cutting-off machine with automatic cycle only for 90° cutting, equipped with N/C electric bar feeder with positioning tolerance in cutting down to ± 0.05 mm and automatic separator system for cut pieces.
|
|
Electropneumatic sawing machine with up-feed blade and automatic feeding device
|
|
Advantages when compared with bandsaws:
·Higher cutting performance due to a 5 to 10 times higher feed rate
·Smaller foot print
For cutting sizes over 150 mm, bandsaws are typically more economical.
The differences are:
·Universal saws with vertical from the top or from the bottom of the table coming saw blade, suited also for miter cutting
·Production saws where orders are processed fully automatically without any personnel
·Mass production saws with very high output levels and extremely small cut piece tolerances.
|
|
SA-70NC
Solid Bar Sawing Machines
Shortest 25mm Crop Lengths
SA-70NC – S ( HSS Saw Blade )
SA-70NC – U ( TCT Saw Blade )
SA-70NC – NF ( Non-Ferrous )
The new SOCO SA-70NC sawing machines incorporates the newest technology with unparalleled functions. This revolutionary innovation brings you the shortest crop length available in the global market: 25mm (SOCO Global Patent). With capacity up to 70 mm in solid bar and tube cutting, it is guaranteed to bring you continuous savings and production.
Machine Features:
• 25mm – The shortest Crop Length of any machine available in the market (SOCO Global Patent)
• With the shortest crop lengths, the SA-70NC brings maximum material savings and more production
• Using a thinner and smaller TCT saw blade, there is lower initial investment in blade and long term savings in material
• HSS Saw blades may also be used, with standard built-in settings and cooling system, for even more savings on tube cutting
• TCT Saw Blade for maximum speed and performance in tube and bar cutting
• Superior Speed : O.D.40mm Copper solid bar, L = 56.5mm,cycle time is 3.7sec
• Long Blade Life: Superior design provides “ 0 ” backlash and unparalleled saw blade life
• Accuracy and Precision
- Electric Servo Feeding
- Floating Feeding Carriage to ensure precise feeding and cutting lengths
• 6.5 Meters Tube and Bar Loading Magazine
(- Circular Saw - Sawing Machine - Cutting Machine - Deburring - Tube End Finishing, Bender Tube, bender Pipe, Cutting, Chamfering Machines, Deburring Machines, CNC Tube and Bar Machining Center, HSS saw Blade )
|
|
Metallographic cut off saws are highly powerful and precise machines. The C350M series abrasive cutters were recently introduced in the Hitech range and as solid, easy-to-use and reliable machines, represent an optimal solution for those who operate in the metallographic field.
Shown for the first time at the Control Tradeshow in Stuttgart (Germany - 22-25 April 2008), the version with 3 manual axis captured the curiosity and interest of the visitors of the Fair, and generated positive feedback from the professionals.
In the forthcoming months the range of cutting machines belonging to C350M series will be further expanded with the introduction of new versions (1, 2 or 3 axes manual or automatic) to complete the offer of heavy duty/high capacity machines.
|
|
1. Built-in sawblade for low noise and safety operatoin.
2. Maximum thickness of cut 10~32 cm.
3. Equipped with 12cm rubber clamping pad to avoid damage.
4. Single or multiple workpiece can be cut at a time.
5. Infeed fence ensures high cutting accuracy.
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we cut it !
Further saws, like Table saws, Mitre saws, Double mitre saws, Notching saws, Vee-notch and cut off saws, Automatic saws and Automatic saws with pusher cover our product range.
|
|
• Cuts up to 8 in (200mm) in Thickness
• Precision Cutting Tolerances to +/-0.002 in (0.05mm)
• Surface Finish to 20 micro-inch (0.5 micro-meter)
• Fast Set Up and 650 Part Memory Allen-Bradley 1394 AC
Motion Control System
• Touch Screen Controls
• Optimize Cutting With a PC Based Windows Program
• Stack Material Vertically and Horizontally to 8in (200mm)
• Load Material from Front, Back or Topy
|
|
> Main features
* 45° cutting of 2 glazing beads / working cyle * 2 sawblades D. 250 mm for cutting the glazing bead * 2 coaxial sawblades D 175 mm for milling the hooking foot * Clamping by 4 independent vertical clamps. * Possibility of adjustment up to 6 differents positions, without moulds * Automatic feed of sawblades group
|
|
Exceptional double mitre saw.
Special fabricated and welded steel bed frame with finish machined,
complete with slideways for the mobile head.
Pneumatic head tilting from 22°30’ to 90°. (TK145/10 TK 145/12).
Double head tilting from 22°30’ / 90° / -45° operated by direct current motors controlled by NC. (TK 145/15 CNC).
Mobile head operated by direct current motors and controlled by NC.
Travelling speed: 24m/1’
Conveyor belt for chips removal
Device for rh load.
Feeler pin.
Standard and optional programs.
|
|
TWIN ELECTRA SUN
Twin-head cutting-off machine with 3 controlled axes, automatic traverse of the moving cutting head and electronic control of every angular setting from 45° (internal) to 22°30’ (external) with accuracy of 240 places on each degree.
|
|
TK 145/20 CNC gold Exceptional double mitre saw.
Full protection with complete cover and front automatic lowering closure.
Special fabricated and welded steel bed frame with finish machined,
complete with slideways for the mobile head.
Double head tilting from 22°30’ / 90° / -45° operated by direct current
motors controlled by NC.
Noise deadening guaranteed by the complete enclosure and also
by acoustic insulation panels
Mobile head operated by direct current motors and controlled by NC.
Travelling speed: 24m/1’
Conveyor belt for chips removal
STANDARD PROGRAMS
- Single cuts
- Sequence of cuts
- Profile codes and profile heights stored in memory for automatically calculating cuts at 45°
- Loading of cutting lists originated from ABACUS/TEKNA program
- Wings cut
- Blade motor timeout: blade motor automatically turns off after an inactivity period of the machine
- Sequence of cuttings on bar: bar manual progress, variable cutting length, possibility to vary the cutting angle on any degree.
- Automatic motor start in manual cuts
- Possibility to work with inches
OPTIONAL PROGRAMS
- Extra-short cut - Extra-long cut
- Automatic in-sequence cuts
- Trimming
|
|
• Système de sciage entièrement automatique
• Coupe jusqu'à 4 po (100 mm) en épaisseur
• Coupe tous les types de métaux ferreux
• Liquide de coupe
• Arbre 30 HP avec moteur variable
• Tolérances de précision à +/-0.003 po (0,08 mm)
• Finition de surface à 16 micropouces (0,4 µm)
• Serrage hydraulique des deux côtés de la découpe
• Élimine l'usinage ultérieur des pièces découpées
• Réglage rapide et mémoire numéro de piëce
• Vitesses de sciage rapides
• Commandes par écran sensitif
• Commandes PLC Allen Bradley
• Changement de lame facile
|
|
• Fully automatic sawing system
• 8" to 12" thick material
• Eliminate subsequent machine of cut parts
• Material handling options for loading and unloading
• Cuts solids, extrusions, tubes or rounds
• Precision positioning tolerances to +/-0.0002
• Universal clamping for single or bundle cutting
• Touch screen operator interface
• Digital AC motion control system from Allen Bradley PLC
• Multiple simultaneous cutting
• Easy blade change
|
|
Bewo's automatic saws are built for strength and stability to guarantee high levels of production and durability over many years. Bewo offers 4 models: the SCF Quatro for high quantities and speed, the FCH, the ECH for heavy profiles and large dimensions, and the DCH, with its unparalleled speed.
|
|
SA-76NC ln-line
EXTREME SPEED TUBE CUTTING + CHAMFERING MACHINES
HIGH PRODUCTION, FLEXIBLE AND I2® SYSTEM
SA-76NC
The new SOCO SA-76NC brings you the latest technology in tube cutting systems. Equipped with a 6.5/8.5/12.5 meters BTM ( Bundle Loading Magazine ) and a 2 / 3 / 4.5 meters output gate, the SA-76NC offers unparalleled sawing output for tubes and pipes.
Together with SOCO control system, Touch Screen and i2® ( Intelligent Interface ) system, the SA-76NC offers precision and versatility, while allowing for quick setup times between different tube dimensions lengths.
SA-76NC in-line
Besides the standard functions of SA-76NC, and the SA-76NC In-line may also be a part of complete Automation Cells for tubing. The working process is from Loading, Feeding, Cutting, Chamfering, Deburring , Air Clearing and Tube Collecting. It brings time saving as well as higher throughput and performance.
(Pipe Benders - Tube Benders - Tube Bending - Pipe Bending - Bending Machine - Tube Bending Machines - Pipe Bending Machines - Circular Saw - Sawing Machines - Cutting Machines - Chamfer - Deburring - Tube End Finishing, Bender Tube, bender Pipe, Cutting, Chamfering Machines, Deburring Machines, CNC Tube and Bar Machining Center, HSS saw Blades )
|
|
Easycut FE 800
Simple, precise and sturdy bridge saw, ideal for the most frequent processing. Equipped with e SOOmm circular blade, manually inclinable in any position from 0! to 90", with possibility of step-cutting, even inclined.
User interface with keyboard on a mobile arm and lined display for control, command and programming.
|
|
New center of cutting up and shaping
The new TC750 is ideal as well for the funerary one, decoration as the building. With numerical control, it has five axes and is intended for the operations of traditional cut, shaping, formatted 3D and massive milling. It is equipped with the new software You CAD/T' CAMWOOD 3D.
Rotation of the unit of sawing on 360° and slope of the head of 0° with 100°. TC 750 is equipped with a disc from 400 to 750 mms in diameter pulled by a spindle motor of 17,6 kw (24 cv).
Available in version gantry or semi-portal bridge crane, this center of tack welded cutting up has a length of cut useful of 3,5 m for 15 m on adaptable track and a height of useful cut of 250 mm maximum.
With or without table, this perhaps provided equipment, in option, of a store of tools and an automatic system of change.
Obstruction of the TC750 with table: 6,135 m of length, 6,025 m broad and 3,608 m in height.
|
|
COBRA 350 CNCFE, automatic/semi-automatic electropneumatic CNC sawing machine to cut aluminium and light alloys solids and/or sections using blade with electrowelded hard-metal plates.
The machine cuts from 45° right up to 45° left and the head tilts from 0° up to 45° left so as to make inclined cuts.
Machine with controlled double axis multimicroprocessor so as to obtain, on the same bar, 32 different lots, each of different lengths and quantities.
A FEW FEATURES:
Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
Control and function systems protected against in-going and/or out-going electrical and electromechanical phenomena
DISPLAY: 40 characters read on sixteen lines so as to visualize technological parameters such as:
- band speed
- number of cuts programmed and carried out
- band thickness - length fed in each stroke
- cutting time - ampermeter
- band tensioning
- diagnostics and/or caution messages (approx.ly 80) visualized in the language of use.
Regulation head stroke according to dimensions of material which has to be cut, is programmed from control panel.
Adaptive shearing stress control system.
Pneumatic vertical vice.
Barfeed is obtained by means of screw/nut with recirculating ballscrews with D.C. motor.
Feeder carriage is mounted, by means of sleeves with recirculating ballscrews, on guided and hardened steel guides.
Flashing indicator light in case machine is stopped.
Predisposed to mount loading table.
Whole strong structure in electrowelded steelwork predisposed for handling with movement equipment.
Service keys and instructions manual, for maintenance and spare parts list.
|
|
TK 139
Radial single-head cutting machines
Construction Features
Blade dia 1000 mm to get very good cutting capabilities
Full protection with complete cover and front automatic lowering closure
Strong cast iron head
It cuts at 90°
Blade motor operated by inverter
Spray lubrication
Oleo dynamics vertical/horizontal clamps
Possibility to equip the machine with loading/unloading roller table
TK 137 - TK 138
Single-head cutting machine with upwards blade
Blade dia 600 mm to get very good cutting capabilities
Oleo-pneumatic blade upstroke
Spray lubrication
Full protection with complete cover
Chips collection drawer
Optional
RH side tables 801/E, 801/D, 802/M, 802/F
LH loading tables 802/SX, 85400 (only for TK 138)
Pusher (only for TK 138)
TK 137 For all cuts between 20°/90°/-20°
TK 138 It cuts at 90°. If associated to a pusher it can execute in-sequence cuts
|
|
FA-110NC
FULLY HYDRAULIC CIRCULAR SAWING MACHINES
PRODUCTIVE, FLEXIBLE AND HIGH ACCURACY
Machine Features:
NC Line
+ Touch Screen System for Cutting Settings
+ Multiple Cutting Lengths per Tube
+ Servo Controlled Feeding
+ Vertical sliding saw head ensures stable and precise cutting
+ Backlash eliminating device prolongs the life of saw blade
+ Counter Balance System for maximum stability through the entire cut
+ Patented Floating Feeding Carriage for superior cutting length accuracy and smooth material handling
+ Rigid and reliable clamping vise provides secure material holding
+ Automatic lubrication system maintains good work performance
+ Circulating cooling system results in smooth cutting surfaces and longer blade life
+ Electronic Saw blade protection cover for safety operation
+ Built-in chips tray for convenient cleaning and maintenance
(Pipe Benders - Tube Benders - Tube Bending - Pipe Bending - Bending Machine - Tube Bending Machine - Pipe Bending Machine - Circular Saw - Sawing Machine - Cutting Machine - Deburring - Tube End Finishing, Bender Tube, bender Pipe, Cutting, Chamfering Machines, Deburring Machines, CNC Tube and Bar Machining Center, HSS saw Blade )
|
|
Cantilevered concept bridge saw with 5 axes.
SX5
Travel, X: 3500 mm
Travel, Y: 2000 mm
Travel, Z: 400 mm
Travel, C - saw spindle rotation: 360 º
Travel, A - saw spindle tilt: 0 - 90 º
Spindle power: 15/20 hp
Size of work surface: 3800x2000 mm
Height of work surface: 700 mm
Weight: 4500 kg
|
|
CNC vertical sawing machines, with HSS circular blade, to cut steel solids and sections up to 180 mm diameter
|
|
|
|
Sawing machines, Cut-off machines: 
