|
|
|
These burners provide close coupling of radiant heat sources for use in "line" arrangements where relatively "light" heating jobs are to be performed. Designed essentially for heating moving webs, line burners also find frequent application in ovens, as well as in heating stationary objects. The 500 Series is available in a variety of cup configurations to permit several self-piloting geometric arrangements. The small 200 Series and large 700 Series, however, are currently available for straightline use only.
|
|
Slopes ASK are gas-burners flame car stabilized and high speed of exit. They can function in a room temperature of 550°C.
Characteristics:
POWER:
Total ventilation - 30 kw with the linear meter (for a pressure of mixture of 15 mm E.C. for mixer with puffed up or mixing air atmospheric under 1 bar).
FOOD GAS:
- Gas average pressure 0,3 to 2 bars (atmospheric mixer)
- Gas low pressure (mixing with puffed up air)
- All gases
|
|
Efficient and Simple, Winnox Burners Meet Tomorrow's Emissions Mandates Today
Designed to comply with the global emissions mandates of the 21st century, Winnox burners are also simple to set up and operate.
Ideal for air heating and oven applications, Winnox burners incorporate direct-spark ignition and an air/gas regulator to fire efficiently over a wide gas turndown range at a controlled ratio.
|
|
M-PAKT® Ultra low NOx
M-PAKT Ultra low NOx Burner provides the world's lowest levels of NOx and CO while maintaining typical MAXON quality and reliability. In most applications, NOx is typically < 9 ppm while CO is maintained < 20 ppm. The M-PAKT industrial burner is suitable for air heating for ovens and dryers for paint finishing, paper making, textile production, food baking, grain drying, and make-up air heating. With optional sleeve materials, M-PAKT substantially reduces emissions in incinerators, oxidizers, heat exchangers and process heaters.
|
|
The Eclipse Minnox burner utilizes a premixed gas/air mixture with excess air; the resulting low flame temperature of 1200°C (2200°F) produces extremely low NOx discharge from the burner head. A modular designed gas/air mixer is adapted to the burner manifold in various configurations.
The flame is protected by a stainless steel shroud which insures good combustion without being influenced by process air. Burner capacities are available from 125 to 4000 kW (430,000 to 13.6 million Btu/hr.); higher capacities can be designed for special applications.
|
|
MAXON CROSSFIRE® Low NOx Burners comply to the world's toughest air quality standards for NOx and CO by cleanly combusting gaseous fuels. CROSSFIRE® Burners are nozzle-mixing, modular line burners designed for a variety of fresh and re-circulated industrial air process heating applications. The low NOx burner is available in straight, grid, and insert cartridge sections which are used to spread heat across your duct for very uniform temperature distributions.
The CROSSFIRE® Burner can be designed within a system to allow for up to 2,500,000 BTU/hr/ft while producing extremely low emissions of both NOx and CO. You can combine CROSSFIRE® Low NOx Burners with Smartfire® Intelligent Combustion Controls for optimal control of emissions and efficiency.
|
|
LOW-NOX Industrial Burners,
High Efficency and for clean environment,
Up to 40 MWs,
All burners are produced according to EN norms,
They have ISO, CE, DVE, ROHS, etc. certificates.
|
|
|
The CYCLOMAX® Low NOx Burner provides clean combustion with NOx emission levels below 25 ppm and CO levels less than 75 ppm. Lower emissions may be possible based on application. The integral fan version of this industrial burner is available in 5 sizes (up to 3,700,000 Btu/hr) and the EBMRV version is available in 4 sizes (up to 7,400,000 Btu/hr).
|
|
|
Selas low NOx flat flame wall burners are ideal for fiber or brick furnace settings. They install quickly and easily into new equipment and are cost-effective retrofits for existing furnaces. Our low NOx burners meet the strict nitrogen oxide requirements of the petrochemical industry.
|
|
2000 SERIES HTR® COLD AIR BURNER
CAPABILITIES High thermal release High temperature radiation without flame impingement Ability to place heat where required High turn down capacity Nominal capacity range 100,000 to 4.4 mm Btu/hr
FEATURES
Patented Stabilization Principle* high temperature radiation through high speed combustion Extra rugged port block and mounting plate construction Integral fuel orifices eliminates the need for individual gas balancing or throttle valves
|
|
It was the first precalciner to include a multichannel
Low-NOx BURNER, a combustion chamber without SWIRL, meal fed as a suspension, efficient and progressive mixing.
Very low reactivity coal
Owing to the high-performance burner, low reactivity fuel is possible, such as anthracite coal.
Burn
Oil, coal, petcoke, anthracite, natural gas, plastic chips, ...
Low Nox emissions
The original aeraulics design and the low-NOx burner allow very low NOx emissions.
Reach
Lower NOx emissions of burning systems.
Smooth and safe operation
The controlled flame and progressive mixing ensure safe ignition and refractory long life.
A flexible design
The goose neck length gives the necessary residence time adapted to the reactivity of the fuel.
|
|
|
MAXON Series "NP" and "RG" AIRFLO® Industrial Burners provide clean, direct fired air heating to optimize process air heating efficiency. The modular natural gas burners install easily with custom built patterns to fit your duct. NP and RG burners burn cleanly with most gaseous fuels and offer high heat releases per foot with wide turndown ratios.
|
|
The Eclipse Vortometric v2.00 is a dual-fuel, high intensity burner which operates at maximum efficiency whether firing fuel oils or natural, propane, butane, manufactured or other mixed gases.
The high combustion air swirl rate produced by the Vortometric burner results in a stable flame with high turndown capabilities on a wide range of fuels. The burner can be operated with low excess air where maximum efficiency is required or high excess air for high volume process air heating.
The intense and thorough mixing of the air and gas results in low NOx and CO emissions.The novel design of the oil atomizer uses shear forces and acoustical energy created by a "vortex generator" to vaporize the fuel for clean, smoke-free combustion.
Vortometric v2.00 burners are available with capacities of 6mmBtu/hr.to 210mmBtu/hr. Low combustion air pressure is used (7.5"w.c.)with all sizes and atomization of the fuel oil can be by steam, air, or any gaseous fuel.
|
|
1029 SERIES FUEL ENERGY COLD AIR BAFFLE BURNER
CAPABILITIES Luminous flames at all firing levels High release rates with moderate air pressure Turndown to 15 to 1 on ratio with flame characteristics and direction maintained
with gas Stable flames with lengths tailored to the
application
|
|
|
The MAXON VALUPAK® gas burner provides a convenient, packaged solution for direct fired heating applications in ovens and dryers. The burner fires cleanly into applications with balanced pressure where high turndown of over 40:1 is required for precise temperature control. Durable steel construction provides years of reliable service. VALUPAK® is available in wide variety of packaged forms to suit your application for a bolt-on solution.
|
|
Selas nozzle mix burners offer many advantages over typical flame-type burners. They are designed to thoroughly mix combustion air and fuel gas at the nozzle so that it can burn quickly and completely. Combustion occurs within the nozzle, so the heat exiting from the nozzle cup is uniform, stable and highly controlled. This rapid combustion creates a quick release heat, radiated from fully reacted gases that are closer to a theoretical flame temperature, but with no danger of flame impingement on the workpiece.
Selas nozzle mix burners are ideal for smaller furnaces. Since there is no chance of flame impingement, the distance from the burner to the workpiece is shorter. You'll also save money on fuel costs with Selas nozzle mix burners because they require less air to fuel combustion.
|
|
|
The ECOSTAR GAZORAM SERIES gas burners provide a convenient, packaged solution for direct fired heating applications in ovens and dryers as stenter machines. The burner fires cleanly into applications with balanced pressure where high turndown of over 40:1 is required for precise temperature control. Durable steel construction provides years of reliable service. GAZORAM is available in wide variety of packaged forms to suit your application for a bolt-on solution.
|
|
1360 SERIES UNI-HEAT® BURNER
CAPABILITIES High velocity, jet-boosted, high momentum burner Outstanding furnace and product temperature uniformity Shorter cycle times High furnace productivity Lower fuel consumption Suitable for fiber wall construction Low NOx emissions Simple combustion control Simple furnace pressure control Suitable for use with impulse control Maintains either an oxidizing or reducing furnace atmosphere No eye-irritating, odor-producing combustion products even at temperatures as low as 350°F (177°C) Designed for cold air applications. For alternative hot air burners contact Bloom. Furnace temperatures to 2200°F (1204°C) and higher with optional construction
|
|
|
MAXON APX® Natural Gas Burners are packaged nozzle mixing line burners designed for fresh or low temperature re-circulated air heating applications. The APX® Industrial Burner is a value engineered design utilizing a single aluminum extrusion for both its air and fuel manifolds. Its single-piece, joint-less body design provides standard straight gas burners up to 40 feet, H-shaped burners, and grid shaped burners engineered to your specification. APX® burner construction provides years of maintenance free operation and lower cost of ownership than any other alternative.
|
|
The Primefire 400 burner represents
an evolution in burner design. The Primefire 400 is designed to
significantly reduce fuel consumption
and NOx emissions over comparable
burners, while fitting into existing
control schemes.
The Primefire 400 burner achieves
these improved results by using a
form of gas pre-heating. By injecting
a small amount of oxygen into the
gas stream prior to the main combustion
process, the gas will actually
begin to "crack", releasing greater
amounts of carbon. This carbon,
which is consumed in the main combustion
process, increases the luminosity
of the flame. Since luminosity
has a tremendous impact on heat
transfer, the burner considerably
improves heat transfer and fuel
efficiency. Primefire Series 400 oxygen-fuel burners are available in four sizes with maximum capacities of 2MM, 4MM, 10MM and 20MM Btu/hr. All models are capable of 4:1 turndown and can be fired using natural gas or fuel oil.
|
|
OXY-THERM® Natural Gas Burners eliminate the need for costly combustion air pre-heaters, regenerators or recuperators and provide clean combustion with low NOx levels. OXY-THERM® Gas Burners use oxygen for the combustion reaction, removing atmospheric nitrogen as a source for NOx creation. OXY-THERM® burns any gaseous fuel or oil including low BTU off gases and waste oils. No other oxy industrial burner has as many installations or as much proven time in reliable production.
|
|
STAROX: burners oxy-fuels. They are burners with mixture at the flash point: the gas and oxygen become a combustible mixture outside the burner. They thus require neither to be cooled nor of ceramic parts.
Characteristics:
- Higher temperature with 1400°C
- Mixture at the flash point
- No water cooling
- Great flexibility in use
- Perfect stability of the face of flame
- Broad range of power
- Manufacture out of heat-resisting steel
Power:
from 50 to 500 kw
Applications:
Foundry
Metallurgy - Foundry
Metallurgy - Smelter
Glassmaking - Smelter
|
|
|
Selas pre-mix gas burners encompass many styles including duradiant, superheat, PRS, multi-port PR, refrak, ribbon, anti-involution, and EG. They bring versatility, control and stability to a host of applications from soldering, high temperature brazing and glass polishing, to ink or textile drying, air heating and annealing/tempering. All of our pre-mix burner types are designed to offer long service life over a wide operating range.
|
|
Safely supplying pressurized fuel to industrial burners demands attention to detail, quality components and professional engineering. Maxon fuel trains and supply skids assure your installation of trouble free operation in professionally built packages.
For gas and oil burners, Maxon fuel trains may be standard built or custom-built including :
Designs to comply with industry' most rigorous demands
Construction to meet local safety standards & directives for your area
Components selected for best performance and minimum maintenance
Leak- and function-tested prior to shipment for quality assurance
Accompanying required certificates where required for smooth hand-over on site
|
|
MAXON's UNI-RAD® Radient Tube Burner produces an extremely stable and luminous flame that maximizes heat transfer throughout radient tube furnaces. Flame ignition is maintained by a patented continuous spark system that ensures ignition each and every time without fragile, porcelain ignitors. This patented ignition system enables UNI-RAD® to pulse fire radiant tubes producing longer tube lives for reduced furnace ownership expense.
Options are available to operate with preheated combustion air to 1200°F (650°C) to reduce your fuel consumption and operational expenses.
|
|
|
The petrochemical industry has many uses for our burners and technology. Selas burners can be found in numerous applications in many locations, including refineries, plastics manufacturing, chemical processing plants and textile plants, among others. We design our burners to meet many application requirements such as low NOx, ultra low NOx, nozzle mix and more. We understand that there are many different sizes and shapes of thermal applications and equipment so we offer burners that can be mounted on the floor, wall or ceiling. Furthermore, our burners are available for the wide variety of fuel gases that the petrochemical industry uses.
|
|
|
RADMAX® Radient Low NOx Burners are designed to deliver uniform, high intensity radiant energy for moisture removal in textile and paper ovens, paint drying, and powder coating, as well as many pre-heat, plastic forming, heat treating and annealing operations. With innovative ceramic or metal foam tiles, the RADMAX® natural gas burner produces low to Ultra-Low NOx and CO levels for a wide variety of industrial gas burner applications.
|
|
SBM proposes a wide range of infrared gas burners
- stainless steel construction
- instant heat
- long life ceramics
for following applications :
- rotisseries
- doner kebab
- baking ovens
- drying ovens, …
|
|
The MAXON TUBE-O THERM® burner-to-tube direct firing system provides uniform heat transfer, eliminates "hot spots", and produces faster bring-up times than all other tube burners. This industrial burner fires directly into smaller-bore, less expensive tubes and burns butane, , propane or natural gas with reduced levels of NOx and CO.
TUBE-O THERM® gas burners ensure improved performance for industrial washers, dip tanks, water-bath heaters, and solution tanks.
|
|
2320 SERIES RECUPERATIVE
RADIANT TUBE BURNER, SUCTION TYPE
CAPABILITIES Quiet stable operation Uniform tube temperature Conversion of existing Bloom gas fired recuperative radiant tube burners to combination gas and oil firing easily accomplished Suitable for 5”(127 mm) and 7” (178 mm)
and larger I.D. ‘U’ tubes or ‘W’ tubes and
can be mounted on either leg of the tube
|
|
|
|
Burners, Accessories
