|
|
Mechanically-bonded continuous fin assures excellent heat transfer and helps prevent fin vibration at high air velocities.
Several standard formations and mounting bushings available.
Standard fin is high temperature painted steel with steel sheath.
Optional stainless steel fin with stainless steel or incoloy sheath for corrosion resistance.
120v, 208v, 240v, 480v available.
Maximum Sheath Temperature
750°F (400°C) - Steel
900°F (480°C) - ST.ST./INCOLY
Made in U.S.A.
|
|
Applications:
Air Heating, Air Ovens, Load Banks
U.L. Recognized - E56973 C.S.A. Certified - 016386-0-000
Construction:
-Seamless stainless steel sheath
-Post terminals
-Ceramic element support
-Element wire is situated in close proximity to outside surface for maximum heat transfer and minimum internal temperature while preserving good dielectric qualities.
-Magnesium oxide packing
-Aluminum fins offering maximum radiating surface and providing for rapid heat transfer to the surrounding medium. Stainless steel fins are available for corrosive environments.
Aluminum fins are standard.
|
|
|
Ideal for generating steam and heating gases and liquids in pressure vessels and tanks, flanged immersion heaters are hairpin-bent tubular elements welded or brazed into a flange and provided with electrical enclosures. Chromalox flanged immersion heaters are available in a wide selection of flange sizes and with a variety of electrical enclosures. Most units are UL-listed and CSA-certified or can have ATEX certification. ASME or PED code construction is also available for high-pressure applications. Chromalox can also rebuild large flanged heaters to save you money. Many models in stock.
|
|
Flanged Immersion Heater
Over 4300 different flange configurations with 1kW - 1200kW capacity. General Purpose, Moisture Resistant, and Explosionproof enclosures.
|
|
Bottom mount immersion heater
These immersion heaters on a screw plug or a flange are designed to be mounted in the tank bottom from the interior. The height of the heating circuits is generally reduced to the minimum in order to allow for major variations in the liquid level.
The circuits arranged in layers or on spools allow installing high power densities.
|
|
Teflon® heaters/ Galvatek flat heaters
ASSEMBLY TYPE F
Standard : heating cable insulated with Teflon® FEP
PP or PVDF rod frame
Non heating cable position either on the small side (J) or on the large one (K)
Power from 0,5 kW to 15 kW
|
|
Alper S.R.L is a leading Company in the development and production of flexible electrical resistors called PTF (Polymer Thick Film).
Thanks to the use of special conductive inks or pastes printed on polyester sheet, ALPER is in a position to produce resistors in many shapes and very reduced thicknesses (generally 0.2 mm) to suit the specifications of the end product.
The inks, that have been developed by our Company, in some particular conditions may show PTC features (Positive Temperature Coefficient); this means that they are able to limit the heat produced, with no need to apply a thermostat and with no risk of overheating.
This type of resistor offers many advantages when compared with the more traditional electrical resistors now on the market.
The particular features of PTF heaters make them so versatile that they can be employed in a wide range of applications in both the domestic and industrial sector.
|
|
|
Glass filament insulated heating cord. Very flexible, especially suitable for tight winding radii and concentrated power. The connecting cables are glass fibre insulated.
|
|
• Custom Design
• Etch foil and Wire Wound Technology
• Precise Even Heating
• Flexible and Lightweight
• Moisture and Chemical Resistant
• Wide Temperature Range -60c to +230c
• UL and VDE Approval available
• Full Design and Manufacturing Service
• 3-5 Day Delivery
|
|
Honeywell Sensing and Control Flexible Heaters are part of the thermal product portfolio. Honeywell offers multiple insulation and heater configurations to serve a wide variety of application requirements. Combined with the thermal sensing and switching portfolio, this capability provides design flexibility to support many opportunities for total thermal management.
|
|
U.L. Recognized - E48358 C.S.A. Certified - 016386-0-000
Applications:
Battery Warmers, Cabinets, Defrost Applications, Heated Food Tables, Laboratory Equipment, Incubators, Ceiling Panels, and Wall Panels.
Features:
-The Hotwatt Foil Heater is a self-contained one-piece assembly.
-A resistant element is laminated between two layers of aluminum foil.
-The heater is ideally suited for area and surface heating applications.
-Sheath temperatures to 300°F.
-Widths range from 1 1/4" minimum -36".
-Lengths range from 4"-60".
-Heaters are available with a thermostat.
-Many configurations with or without holes and cutouts are available.
-Made in U.S.A.
Wattage:
The maximum wattage is based on 3 watts per square inch of surface.
Voltage:
Voltage is normally 120 or 240 volts. Lower voltages are available.
Construction:
-Aluminum foil
-Insulating sleeve
-Premium grade resistance wire element
-Insulated leads
|
|
|
|
|
|
Flexible Thermofoil™ Solutions for Heating
Thermofoil™ heaters are thin, flexible heating elements consisting of an etched foil resistive element laminated between layers of flexible insulation. Since their introduction by Minco over 45 years ago, Flexible Thermofoil™ heaters have demonstrated significant advantages over conventional electric heaters.
Precise Heating
Thermofoil™ heaters put heat where you need it. You simply apply them to the surface of the part to be heated. Their thin and Flexible profile gives close thermal coupling between the heater and heat sink. You can even specify profiled heat patterns with higher watt densities in areas where heat loss is greater.
Faster Warmup and Longer Life
The flat foil element of Flexible Thermofoil™ heaters transfers heat more efficiently, over a larger surface area, than round wire. Thermofoil™ heaters, therefore, develop less thermal gradient between the resistive element and heat sink. Heaters stay cooler. The result is higher allowable watt densities, faster warmup, and prolonged insulation life. Thermofoil™ heaters can safely run at wattages twice those of their wire-wound equivalents. Insulation life may be ten times greater. For high levels of reliable heat, the obvious choice is Flexible Thermofoil.
|
|
Flexible heaters from Watlow are just what the name implies: thin, bendable and shaped to fit your equipment. You can use your imagination to apply heat to the most complex shapes geometries conceivable without sacrificing efficiency or dependability.
Applications
Medical equipment such as blood analyzers, respiratory therapy units and hydrotherapy baths
Freeze protection for military hardware, aircraft instrumentation and hydraulic equipment
Battery heating
Foodservice equipment
Factory bonding and subassemblies
Any application requiring a flexible shape or design
|
|
Thermofoil heaters put heat where you need it. You simply apply them to the surface of the part to be heated. Their thin and Flexible profile gives close thermal coupling between the heater and heat sink. You can even specify profiled heat patterns with higher watt densities in areas where heat loss is greater.
The flat foil element of Flexible Thermofoil heaters transfers heat more efficiently, over a larger surface area, than round wire. Thermofoil™ heaters, therefore, develop less thermal gradient between the resistive element and heat sink. Heaters stay cooler. The result is higher allowable watt densities, faster warmup, and prolonged insulation life. Thermofoil heaters can safely run at wattages twice those of their wire-wound equivalents. Insulation life may be ten times greater.
|
|
|
|
|
|
We present the model RFS, an electric flexible serial resistance, specially design to be applied as a heating system: Electric radiant floor, electric radiant floor for ramps, electric trace heating for pipes, electric trace heating for storage tanks, snow melting system for ramps, systems of prevention of accumulation of snow and ice for roofs and roofs, systems of prevention of accumulation of roofs and gutters, electric heating for animals: pigs, pets, exotic animals habitats, etc. electric heating for the farming: small greenhouses, seedbeds, etc.
We use the RFS to manufacture special heating systems:
Heating blankets, heating mats, crankcase heaters, etc.
Technical characteristics
Operating voltages: 12v, 24v, 48v, 110v, 125v, 230v, 380v... 750v.
Power output at 230 V: 8 to 60w/m
Maximum operating temperature: 180ºC
Maximum circuit length: According to model
Heating conductor: Ni/Cr 80/20
Core : Woven glass fibre
Type of insulation: Thermal Silicone, Glass fibre, P.V.C, etc.
Supply
.In reels.
.In groups already finishes, according to longitudes.
.With diameter of the Isolation: 2,9mm, 4mm (normalized), 5mm, 6mm.
|
|
The hotflex® is worldwide the first tubular heater which can be manually bent in all three dimensions. Easiest handling, simple assembly, optimal thermal features and the simple storage (the hotflex® is supplied in straight condition with numerous lengths from stock) are outstanding product arguments.
The three dimensional bending of the hotflex® enables _towards the traditional heating (e. g. with hotrod® cartridge heaters type HHP) high flexibility.
With applications such as outline heating a better heat transition, considerable savings of the tool mass, replacements as well as lower energy consumption can be achieved.
|
|
|
Tubular heating elements are versatile and transfer heat exceptionally well by conduction, convection, or radiant heating to heat liquids, air, gases, and surfaces. Round, triangular, flat press, and formed bends are made to customer requirements. A multitude of sheath materials are available. More than 20 optimal terminations and many stocked accessories are available. Can be furnished as UL-listed and CSA-certified. VDE and CE certification also available.
|
|
INTERTEC offers the widest selection of explosion-proof heaters worldwide. - CSA/NRTL approvals for America
- ATEX/CENELEC approvals for Europe
- GOST approvals for the Russian Federation
Many other national certificates, e.g. for Japan, the Czech Republic etc.
- For freeze protection
- Installation in a horizontal or vertical position
- Choice of many different wattages
- Self-limiting or with thermostat in the connection cable allowing for quick and easy installation
- Fully factory sealed with silicone, protection degree to IP 68, reliable even in the harshest conditions
- Low thermal stress for long life
- Optional failure alarm
|
|
-Large convection surface
-Clip fixing
-Ready for use
-Maintenance free
Compact convection heater for use in areas with explosion hazard for prevention of formation of condensation, temperature fluctuations and for protection against frost in transmitter housings, switch cabinets and measuring equipment.
Ex protection type:
-Ex d IIC T5 - Ex tD A21 IP6X T100°C
-EX d IIC T4 - Ex tD A21 IP6X T135°C
Conformity certificate:
-01 ATEX 6073/03, LCIE N° 06 ATEX Q8011, IECEx LCI 07. 0020
|
|
Heating wires made of PVC , Silicon , PTFE , fiber glass, fitted with tube and aluminium sheet supportse . For application maximum 450°C available in sigle and double insulation.
Available in in bobbins or cut . On request all products are supply with faston .
|
|
|
|
|
|
In ECAS we manufacture heating cables, parallel or serial, applicable to all those situations where heating is needed.
Model CTCS, parallel heating cable constant power, allows to be cut on site.
Characteristic
Current: 125V, 230V, 380V
Power: 10-50 W/m
Conductor surface: 2 x 0.75 mm², 2 x 1.5 mm² y *2 x 2.5 mm² (*Unique on the Spanish Market)
Insulation between conductors: Silicone
Outer covering insulation: Silicon, P.V.C, metal screening, etc.
Supply
.In reels from 100 to 500 metres
.In sections with lengths adapted to any project, ready to be installed.
Model RFS and RFSS, electric flexible serial resistance
Characteristic
Operating voltages: 12v, 24v, 48v, 110v, 125v, 230v, 380v... 750v.
Power output at 230 V: 8 to 60w/m
Maximum operating temperature: 180ºC
Maximum circuit length: According to model
Heating conductor: Ni/Cr 80/20
Core : Woven glass fibre
Type of insulation: Thermal Silicone, Glass fibre, P.V.C, etc.
Supply
.In reels.
.In groups already finishes, according to longitudes.
.With diameter of the Isolation: 2,9mm, 4mm (normalized), 5mm, 6mm.
Applications
Electric radiant floor, snow melting systems for ramps, roofs and gutters, trace heating for pipes and storage tanks, drum heaters, etc.
|
|
Applications:
Radiation heaters, vacuum technology, submersible heaters, containers, valves, pumps, forms, process and plate heaters.
|
|
Characteristics: A complete range of heating cables, heater strips, woven resistors, drain cables, heat-trace cables, and cables for underfloor heating.
Applications: Refrigeration (reach-in refrigerators, refrigerating compressors, cold rooms, refrigerated units), construction (floors, gutters, roads), industry (petrochemicals, agrifood, aerospace), rail transport (points, trains, metro systems), other (wind farms, aquariums).
Brands: FLEXCORD, FLEXUNIT, FLEXDRAIN, FLEXTAPE, STPGEL, ANTIFREEZE, FLEXFLOOR, FLEXBELT, FLEXMAT, FLEXPLATE, FLEXDRUM, FLEXKIT
|
|
|
RMB self-thermostated heating tape is a ready to use heating tape ; you do not need any tool to lay it and you save 40% laying time in comparison with other heating tapes.
|
|
Industrial heating tape
Applications :
. heating and temperature maintenance of pipes, valves, tanks, etc ...
. unclogging of hoppers.
. freeze protection of huge equipments.
. laboratories.
advantages :
. heating tape ready to install.
. high flexibility for elaborate shapes.
. good resistance to humidity.
technical data :
. standard linear output : 150W/m
. standard voltage : 230V-50/60 Hz
. other voltage : on request
. standard lengths : 2m, 7m and 12m
. supply cable : H07RNF L2m
. max. exposure temperature : 180°C
. max. maintenance temperature : 150°C
|
|
HEATING WIRE IC RANGE - for cold room doors and refrigerated showcases
Applications :
. Framing of cold room doors and negative cabinets
. Doorstep of cold room
. Demisting of refrigerated showcases
advantages :
. No over-thickness at junctions heating part/cold leads
. Heating part and cold leads are mechanically and electrically shielded
caractéristiques techniques :
. Maximum maintening temperature (power ON) : 140 °C
. Maximum exposure temperature (power OFF) : 180 °C
. Standard power : 30W/m
. Standard voltage : 230 V
. Standard lengths (multiple of 0.5 m) : from 1 to 8 m
. Tinned-copper braid from one end to the other end
|
|
DE-FROSTING CB HEATING CORD
Application :
. Heat pump evaporator defrosting.
Technical data :
. Standard power : 30 W/m
. Standard voltage : 230 V
. Regulation :
preset +5°C thermostat included
. Standard lengths (1m multiples) :
from 1 to 6m
Advantage :
. Heating and regulation functions combined in a sole component.
Option :
. Tinned copper braid (with earth lead).
|
|
HEATING CABLES - HC3/EX-HC3 - for industries and hazardous areas.
Thermo Heating Cable HC3 are the hardy and tough heating cable. When the ambient runs low, strap our workhorse heating cable and keep the fluid flow.
Heating Cable HC3 maintains temperatures in pipelines and storage tanks to keep fluids in flow state. They are the ideal for process heating requirements in Oil & Gas, Petrochemical, Power, Chemicals & Fertilizers, Metallurgical, Cement, Pharma, Food and Edible oil industries.
Construction
Heating Cable HC3 is a series type heating cable with single conductor (multistrand, spiraled) heating element with a primary PTFE (Teflon) insulation, metal braid and an outer PTFE sheath. Each length of heating cable HC3 requires termination kits with cold lead for power connection.
|
|
|
|
|
|
At ECAS, we manufacture heating cables and flexible electric elements, for temperature control systems in networks of pipes.
The main purpose of pipe tracing is to avoid and compensate for the loss of heat certain fluids undergo during particular production processes.
Of utmost importance is that the fluid or product flowing in the pipes does not freeze, change viscosity, or harm the piping network.
For sanitary hot water systems, our pipe tracing system avoids the cooling of the water, especially when it is not moving, avoiding the spread of Legionnaire disease.
Heating cable:
For pipe tracing projects we recommend constant power parallel heating cable, model CTCS.
The parallel heating cable has a constant lineal wattage even when it is cut to required length.
Control and regulating :
We have different types of control and temperature regulating solutions, which are adaptable to all kinds of projects, and/or the needs of our customers.
Below are some of the control systems:
DPA: Control and regulation box to connect between 1 and 4 circuits, from 8A to 63A at 230V.
EWDR 902 - T: Digital Thermometer/Thermostat.
ETV - 1991- P: DIN/Omega rail electronic modular analogue thermostat.
ETN - 2P - 1441: DIN/Omega rail electronic modular analogue thermostat with mini-switchboard.
|
|
Application Pontencial:
Submersible heaters, containers, valves, pumps, form, process and plate heaters.
This mineral-insulated heating cable with a braiding of high grade stell 14541 is applicable within extreme corrosive and damp surroundings. The HIL heating cable is extremely robust and easy to bend. The stainless stell brainding is waterlight, oiltight and gastight. An utilisation temperature of up to 800°C enables a variety of applications. The cold end of the heating cable can be fed into a terminal box and connected by means of a MX20X1.5 screwed connection.
|
|
|
|
Heating resistors
