|
|
With short heating up times, high precision temperature control and turbo drying, the VO vacuum ovens show off all their power - at the same time they treat heat- and oxygen-sensitive substances and materials with incomparable care. The direct contact between the load and the heatable and removable thermoshelves ensures rapid and equal heating up without thermal loss. Your decision criteria: 3 model sizes (29l, 49l and 101l); State-of-the-art control technology based on the P performance class for all models; Anti-splinter, VDE-tested door construction for all models.
Each of the maximum four (model size 29l: maximum three) insertable thermoshelves is equipped with a separate large area heating and its own sensors. The control circuits react precisely to differences in load and humidity. In this way all levels used remain equally at the predefined set temperature.
|
|
Drying ovens with vacuum Thermo Scientific Heraeus Vacutherm
-------------------------------------------------
The studies Thermo Scientific Heraeus Vacutherm meet all the needs relating to the heat treatment to vacuum, which it is about process of simple routine, or of complex operations requiring of the temperatures until 400°C.
Drying carefully of thermosensitive materials
Drying in safety of flammable solvents
Time of considerably reduced dryings
Elimination of oxidation
They are available in three volumes - 25,53 and 128 L - and two models of heatings. There exists, moreover, one special version for solvents flammable.
For any knowledge of the drying ovens Thermo Scientific (universal drying ovens, drying ovens for hybridization, drying ovens with mechanical convection, drying ovens with forced convection, vacuum drying ovens...) like on the promotional offers in progress, go on:
www.thermo.com/hot
|
|
Microwave heating and drying cabinet,
type VHM HEPHAISTOS
The newly developed microwave system, VHM HEPHAISTOS, is an internationally patented system and characterised by a very high field homogeneity.
The high field homogeneity allows for the manufacture of high-quality CFC aircraft structures, for instance.
Advantages:
Reduction of production costs due to shorter heating, process and cooling times compared to conventional methods. Use of metal parts (e.g. metal tools and charging systems) possible in the microwave field
Specific volumetric heating of products; the furnace chamber itself is not heated
Sizes from laboratory up to large scale (e.g. aircraft industry) are available (working chamber volume of the shown systems 750 and 4200 ltr); other sizes upon request
Broad spectrum of use
Technical Data
Nominal temperature: 400 °C
Heating: microwave
Control system: S!MCON/32-Net
|
|
Fast drying of ceramic grinding wheels on metal racks. Loading and unloading by lifting truck.
MKT 30 1600/2500/5200
Special ventilation system for even drying, roller curtain door.
Microwave power: 30 kW
Useful chamber dimensions: 1200 x 2000 x 4700 mm (w x h x l)
Number of magnetrons: 38 with 800 W each
Product-ID: 72
|
|
· Definition : natural convection electrical oven for all applications.
· Construction : stainless steel interior, height-adjustable shelf supports, with epoxycoated exterior.
· Insulation : rock wool insulation of all surfaces, including door.
· Aeration : aeration device with side-mounted, adjustable, air outlet.
· Heating : battery of shielded electrical resistors.
· Electricity : single-phase 230V, 50Hz.
· Regulation : 1 thermocouple with digital temperature controller, programmable timer, RS-232 port, safety thermostat.
· Documentation : certification CE and operating instructions in English.
· Delivered with : 2 shelves.
|
|
the latest generation with innovative technique and future-oriented design
use of environmentally friendly materials and refrigerants
service-friendly construction
simple user-friendly operation
optimized parameters for highest testing precision
|
|
300°C General purpose horizontal & vertical industrial ovens (GP)
A standard range of industrial ovens
Maximum operating temperature 300°C
Volumes of 220, 330 and 450 litres
Heating by mineral insulated metal sheathed elements
Good temperature uniformity
Polished stainless steel inner chamber
|
|
Universal drying ovens Thermo Scientific Heraeus Function Line
__________________________________________________________
The drying ovens Heraeus Function Line are the solution for your daily applications.
Storage, drying, treatment and test thermics... They ensure you performance and reliability any test.
Not very bulky, they optimizes your workspace. Their ergonomic design (corners rounded, removable racks, joined of interchangeable door) facilitates cleaning and guaranteed to you an optimal safety.
They are available in three capacities - 60,110 and 200 L - and with a vast choice of the types of heating
For any knowledge of the drying ovens Thermo Scientific (universal drying ovens, drying ovens for hybridization, drying ovens with mechanical convection, drying ovens with forced convection, vacuum drying ovens...), go on:
www.thermo.com/hot
|
|
Process Ovens
High-Heat Burn-Off & Automated Curing
Designed to meet production requirements with maximum efficiency.
Global Finishing Solutions also features an Internal Loop System - featuring air seals to minimize the amount of heated air in the oven escaping to the surrounding atmosphere.
-Shorter Curing Cycles
-Substantial Fuel Savings
-Consistent Temperatures
-Reduced Floor Space
-Fast Heat-Up
|
|
Fan Assisted Ovens
Industrial Ovens
All our industrial ovens are purpose built to suit, a customers specific requirements.
Fan Assisted Ovens
Large or small, with uniform airflow through the chamber, with 9 point UKAS accreditation to AMS 2750D if required.
Convection Ovens
Large or small, less expensive than fan assisted ovens, but still a good degree of uniformity
Typical Users
Aerospace
Nuclear plants
Canning industry
Specials steels
Ceramics
Research laboratories
Universities
Heat treatment
|
|
These high performance ovens offer industry leading production ratings and consistent high quality carbon fiber. Despatch Industries patented center to ends design yields tight temperature uniformity where you need it. Customized solutions optimize cost of ownership, power consumption and safety.
-Design forces air to move completely parallel to the flow of the fibers
-This design allows carbon fiber ovens to operate at consistently higher
temperatures without reaching uncontrolled exotherm
-The result of this technology is that manufacturers achieve 20% higher yields
with uniform density
|
|
|
|
|
|
The PCO2-14™ Polyimide Cure solution is a clean process oven designed for polyimide baking and curing applications. Many semiconductor manufacturing environments, front-end machines are adapted for polyimide curing. This costly process results in equipment typically not suitable for polyimide curing in terms of cleanliness, inert atmosphere capabilities, cycle time or data acquisition.
The PCO2-14™ optimizes the polyimide cure process for semiconductor wafer devices. It enables short cycle times and a consistent, reproducible cure process for all wafers in the product load by combining four essential characteristics in a single, compact design: clean process operation (Class 100 recirculated airflow), inert atmosphere capabilities (<20 ppm of oxygen), temperatures up to 350°C, and fast cycle times with +/- 1% temperature uniformity.
Like other Despatch thermal processing tools, the PCO2-14™ Polyimide Cure can be networked and controlled from a central location, minimizing the floor space required and further improving productivity. Atmosphere data can also be monitored and recorded throughout the cycle.
|
|
IL-RTS Rapid Thermal Shock
Building off of our successful Rapid Thermal Shock product line, Despatch is now offering a new In-line Rapid Thermal Shock (IL-RTS) tool for solar cell manufacturers. This revolutionary tool features a simple, in-line process that applies a low temperature thermal spike to solar cells, eliminating the need for low-bow paste.
After moving through the firing furnace, wafers enter the IL-RTS and are rapidly cooled to stabilize any thermal stresses.
Following the cooling, wafers are warmed to above the dew point temperature to prevent condensation. The IL-RTS is
designed to be compatible with any firing furnace on the front end, and the exit table accepts cell tester automation equipment for a completely seamless in-line process.
|
|
Rotary drying curing oven (Turntable Ovens)
This concept of a turntable oven with simplified and economic mechanization, allows the parts or materials to be recycled to the position of loading and unloading.
These designs and custom-made constructions from 40°C up to 400°C facilitate your establishment on site.
Several independent heating zones and integrated cooling possible.
Manual loading and unloading at the same position with operator's safety provided by virtual guardrails, doors or bi-manual controls.
Automatic loading and unloading by robot or manipulator with a positioning accuracy ensured by indexing mechanism. Very fast transfer time to operator or robot.
|
|
|
|
|
|
LCC/LCD Stackable Clean Process Oven
Despatch's LCC and LCD Stackable Clean Process Ovens have a stainless steel interior and exterior, rugged, programmable process controls and provide a variety of tailored options for your specific needs. For production environment processes where minimal contamination is essential, the LCC and LCD Series ovens offer the highest standards in HEPA filtration. Re-circulated airflow is 100% HEPA filtered for operation at ISO Class 5 (Class 100) or better within the oven chamber. Typical applications for these ovens include die-bond curing and other semiconductor packaging processes, depyrogenation, sterilization and drying for life sciences. The ovens are SEMI S2 and CE compliant for universal acceptance and configured for 220/240 volts and 50/60 hz.
These units are stackable to save valuable floor space. The recirculation motor is mounted at the rear of the oven, providing convenient access and allowing up to three ovens to be stacked on top of one another.
It is available in two different atmosphere configurations:
Air Atmosphere - A forced exhaust fan is included on the air temperature unit for rapid cooling.
Inert Atmosphere - Allows nitrogen (or other inert gas) to be injected into the chamber to lower the oxygen level to prevent oxidation of products. A water cooling coil is provided for rapid cooling. Control of nitrogen flow and water cooling is programmable through the Protocol Plus™ controller.
|
|
Continuous tunnel Oven for curing drying
The very capable research department of ELMETHERM has developed a wide variety of continuous process tunnels. Since each product requires a specific process, we offer a wide range of solutions for conveying, regulation and aerodynamics.
We work together to conceive the best computer-integrated material handling system to respond to your specific needs and involve all your thermal processing applications.
• Conveyor Belt (PTFE tape, metal, stainless steel mesh)
• Conveyor Chain (work, accumulation, specific supports)
• Continuous Belt (round, flat)
• Motorized roller conveyors, transfer by pilgrim-step system, push girder.
|
|
· Definition : electric oven for all applications requiring work under vacuumed atmosphere.
· Construction : cylindrical stainless steel interior, with anodised aluminium shelves, and door with tempered glass view port.
· Insulation : rock wool insulation of all surfaces, including door.
· Vacuum : frontal air intake, vacuum achieved with sealing valve. Pump sold
separately.
· Heating : heating elements surrounded working chamber.
· Electricity : single-phase 230V, 50Hz.
· Regulation : 1 thermocouple with digital temperature controller, programmable timer, RS-232 port, safety thermostat
· Documentation : certification CE and operating instructions in English.
· Delivered with : 2 shelves
|
|
|
On principle, varnish chamber dryers differ from ovens without solvent evaporation through the monitoring equipment and exhaust fan installed for this purpose.
|
|
Curing Towers, vertical curing ovens
We provide turnkey equipment for small spaces for your thermal applications from 40°C up to 350°C.
These tailor-made solutions will help you minimize floor space while providing excellent temperature uniformity, proven mechanics, low maintenance and easy access
TOWER OF STACKABLE TRAYS
This type of tower is extremely compact. By stacking trays it is possible to work at high temperatures without risk of blockages thanks to a simplified mechanization without using chains and possible risk of lengthening. All mechanical components are located outside the hot zone.
We offer facilities tailored to your product.
Loading and unloading at the same or different positions by robot, manipulator, conveyors or manual.
Heating by gas burner or electric resistance.
Possibility of having several temperature regulation zones in the same tower.
Integrated cooling in the tower
|
|
Despatch Truck-In/Walk-In ovens ideal for industrial and clean process environments
The Despatch TA Truck-In/Walk-In Ovens are designed to provide process versatility, reliability and consistency in aging, drying, curing, bonding, finish baking and heat-treating applications. These ovens have been used throughout the world. Well suited for use in rugged, industrial environments as well as in clean rooms, these ovens operate at up to 650º F and are ideal for applications that require tight temperature tolerances or uniformity. Despatch’s design, manufacturing, quality and innovation ensure industrial ruggedness, excellent process control, and dependable operation. To learn more please visit us at www.despatch.com or call our Product Specialists at 1-800-828-9903 Int'l 1-952-469-5424.
|
|
GBC FE oven for welding electrodes drying & storage.
Temperature range from 0° C to 400° C, with completely automatic programmable drying or heating cycles, power from 1700 W to 6000 W.
Load capacity up to 300 Kg.
High insulation and safety grade guaranteed by door latch avoiding any accidental door opening while temperature is in danger range for operator.
Supplied with internal separate shelves for accommodation of different welding electrodes size and compound.
|
|
|
|
|
|
Gullco stationary electrode ovens provide efficient dry storage for electrodes and wire reels. The six sizes are scaled to meet the needs of any shop. (10lbs.– 1000lbs)
Gullco portable electrode ovens are ideal for shop or field use. six models are available to suit any requirement. All are light weight, durable, and easily carried to the welding site. They are insulated for accurate temperature control and efficient operation. Each welder can carry only the electrodes required for the job. All models are equipped with rod lifters to simplify loading and unloading of electrodes. The Dry-Pak® is a tightly sealed thermal container which holds oven conditioned electrodes below AWS or ASME moisture levels for more than twenty- four hours. It does not require electricity! The other portable ovens operate on 115 or 230 volt power. Choose one model or an assortment of models to suit a job or shift length.
- Eliminate the risk of costly rework and rejects
- Ensure consistent physical properties and X-ray quality welds
- Protect Low Hydrogen quality in electrodes and flux core wire
- Protect coatings on Aluminum, Bronze, Cast Iron, Stainless and other
electrodes
- Prevent electrode wastage
|
|
| ... products without technical information |
| |
|
|
Ovens
