|
|
-------------------INDUSTRIAL LINE----------------------------------
*** Cantek Floor Type Split Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Hermetic Compressor
<< (-5/ 5 deg. C) from 2,22kW to 5,20kW
-------------------MASTER LINE----------------------------------
*** Cantek Floor Type Split Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Semi Hermetic Compressor
<< (-5/+5 deg. C) from 3,70kW to 11,20kW
<< (-18/-25 deg. C) from 3,70kW to 22,30kW
This product is already sold in following countries: United Kingdom, Ireland, Germany, Norway, Denmark, Greece, Hungary, Romania, Russian Federation, Turkey, Cyprus, Azerbaijan, Kazakhstan
|
|
Let Braden Engineer a Superior Inlet System Designing a great air inlet is all about attention to acoustics and pressure drop. Our experienced staff of acoustical engineers employs the most modern software to provide compliant designs. Computational Fluid Dynamics (CFD) as well as Finite Element Analysis (FEA), 3-D Solid Modeling, and Thermal, Buckling and Vibration Frequency Analysis are applied to guarantee superior pressure drop, distribution and velocities.
Inlet System Components
• Inlet Plenum
• Inlet Silencers
• Inlet Dampers Doors (Roll Up)
• Inlet Ducting
• Inlet Expansion Joints
• Over 700 Inlet Systems Built
|
|
TT 07 :
- Pression de service (statique): 26 bar
- Matière de l'élément refroidisseur: Aluminium
|
|
|
|
|
|
NuAire’s Glacier -86˚C Ultralow Temperature Freezers
NuAire’s -86˚C Ultralow Freezer line gives laboratory professionals a safe, reliable freezer that they can depend on. Each freezer creates unmatched economical storage, providing the best value found in an ultralow freezer.
Our freezers use CFC-free foamed in-place urethane, closed-cell for thermal protection and structural strength and CFC/HFC-free refrigerants that are non-flammable, and the insulation system is able to withstand extremely low temperatures. Accuracy and reliability are assured with the controls provided: Alarm System, High / Low Temperature Alarm (+5°C to +20°C adjustable); Remote Alarm Dry Contact; Continuous Self Diagnostics (sensors abnormality), Battery Check (battery replacement recommended); Microprocessor Controls; Automated CO2 Back-up System; Filter Check (filter replacement recommended); Compressor Time Delay Adjustment 2 – 15 minutes; Temperature Zero and Remote Alarm Delay Adjustments. All of these features are displayed on the Eye Level Control Panel.
NuAire’s Freezers utilize a technologically advanced compressor for low power consumption, uniform temperature stability and minimal gasket frost buildup is achieved with the Halo Bypass Coil Frame Heater. Two access ports, one on the back side for CO2 back-up and one on the bottom of the freezer for recording (17mm diameter).
NuAire freezers are RoHS compliant and CFC/HFC-free, easy to maintain and less costly with a quiet 47 dba operation.
|
|
JULABO Refrigerators for chemicals are particularly for cooling and storing hazardous substances. They provide self-protecting control circuits and a compressor overheating protection.
Ease of operation
The control unit may be attached anywhere on the front or rear of the refrigerator and features:
- digital display (LED) of actual and setpoint value
- indicator light for cooling
- indicator light for alarm
- test button for compressor overheating protection
The control electronics is designed so to prevent switching sparks that may cause an explosion. The working sensor as well as the safety sensor are protected against short-circuits and disconnection. In case of a disturbance, a complete shutdown is effected. The red alarm control light illuminates.
Chemicals do not damage the explosionproof interior!
|
|
|
COOLING UNIT PS1222CO is designed for flashlamp-pumped lasers and provides effective heat removal and high stability of laser rod temperature. This enables long term operation of your laser at maximum efficiency. Unit is assembled in 19" chase and may be used completing the powering group of laser systems. Also it can be mounted into the 19'' rack.
|
|
Very-low-temperature freezers at −85°C (Premium Line)
The PL (Premium Line) series represents excellence in very-low-temperature freezers for laboratory use.
The difference both line is in the control system and some components that, in the PL and PLL versions, drive equipment reliability even higher, and thus the security of the products stored there, through exclusive and very innovative technical solutions.
KW, through a careful and complex research and development plan, has manufactured this completely new series of PREMIUM LINE ultra-freezers at -85°C, which constitute a super solution, or superior quality with respect to the already high standard of the HS series.
These KW ultra-freezers have renovated design and, in some aspects, functionality, such as the NEW ICE AGE KW CONTROL® and 4 KVA voltage regulator.
The PREMIUM LINE is available in four horizontal models and six vertical models.
|
|
|
|
|
|
Rapid freezers for Plasma on contact KPFF 24B Model and KPFF 48B Model
KW in addition to the -40°C liquid bath freezer, proposes an alternative solution, satisfying however the technical advice and the normative in place, on the freezing time of the plasma bags.
The adapted principal of thermal exchange, in this case, does not use a cold bath at -40°C, but -75/- 80 °C surfaces, with which the bags are in direct contact.
The plasma bags, to be frozen, are immersed, vertically, in wells in which the walls are at least –75°C -80°C. The geometry of the wells is conical, to simplify extraction and formation of the solid bag, without any impediment for the increase in volume which happens when there is a passing in state from liquid to solid.
Internal case, made of 6 or 12 wells in inox AISI 304 steel (AISI 316 on request) with BA polished finishing, with rounded corners for easy cleaning; the external structure is in glazed inox AISI 304 steel sheet; the insulation is in polyurethane CFC and HCFC free, expanded in situ, with density of 40 Kg./mc. and with a minimum mean width of 140 mm., including the door; the door is mounted on the hinges with ABS cover, auto balanced. Triple gasket (absolute retention guarantee against air entry) in silicon rubber with welded joints, warmed up by the refrigerant and of unlimited duration.
|
|
|
|
|
|
New Brunswick Scientific's ultra-low temperature, -86 degree C, laboratory freezers are exceptionally energy efficient, quiet running and reliable, with over a 25-year track record of providing safe and dependable sample storage. Over a dozen upright and chest style lab freezers are offered in two product ranges and multiple sizes to accommodate your storage needs. Racking, boxes, back-up systems and accessories are also offered.
New Hydro-carbon based ULT freezers - New Brunswick is proud to offer the industry’s first hydrocarbon-based ULT freezers – the most energy-efficient models on the market – designed to deter global warming and meet the environmental requirements of today’s laboratory. Offered in 50 Hz models only, these freezers reduce energy consumption by another 5 - 10% over NBS's already energy-saving models; and further reduce CO2 gas load on the environment. They have been designed to meet the latest EC regulations and ACRID guidelines for the use of hydrocarbon refrigerants.
All NBS freezers are CE certified, meet WEEE Directives for disposal, and are 95 - 98% recyclable (by weight).
|
|
Our 700 series Basic -86ºC Upright freezer offers reliability, with No-frills functionality.
Freezers feature a durable, powder coated galvannealed interior and three fixed shelves
Information center with programmable controls, temperature display, and an optional chart recorder or datalogger built into the freezer's base
Four interior compartment doors reduce cold air loss
|
|
Arcticflow Easyclean Freezer
Overview
The Arcticflow Easyclean Tunnel Freezer is specially designed for freezing of small products, shrimps, fish fillets, hamburgers, fragile products, and products placed on trays.
The freezer arrives fully factory assembled at site and requires minimim amount of time for installation. The freezer is supplied with electrical hoist motors to lift the fully welded stainless steel insulated top cover for easy cleaning and maintenance. Furthermore, compared to other freezing systems, the freezer does not require a concrete foundation or any other foundation.
The freezer is based on the energy saving high speed horizontal airflow called Arcticflow, which together with the ultra low temperature ensure a quick and homogenous freezing within a minimum of time. Thus ensuring a good quality finished product with an equalized temperature of min. -18° C.
The machine is equipped with programs for energy savings purposes.
|
|
Modukabin Modular Cold Rooms
Modukabin is CANTEK's range of modular cold rooms manufactured at standard dimensions with ceiling, floor and wall panels designed to lock onto one another. Their very easy assembly and disassembly save you on workmaship costs. standad panel thicknesses are 8cm. and 10cm. The floor can be made of non-slip stainless steel, non-slip plastified sheet metal or industrial plywood, whereas the walls and the ceiling can be made of pre-painted or plastified metal sheet or stainless steel.
from 2,56 cbm. to 22,47 cbm.
|
|
|
Modular climatic chamber according to Walk-in style from 2000 litres till 840000 litres manufactured in France, year 2008.
|
|
|
|
|
|
Monoblock Type Refrigeration Units
*** CANTEK COMPACT LINE ***
- Basic Equipment, low cost solution for small cold rooms and refrgrated cabinets.
- Hermetic Compressor
<< (-5/+5 deg. C) from 0,37kW to 1,48kW
<< (-18/-25 deg. C) from 0,74kW to 2,22kW
*** CANTEK COMMERCIAL LINE ***
- Advanced Equipment, professional solution for small and mid size cold rooms and refrgrated cabinets.
- Hermetic Compressor
<< (-5/+5 deg. C) from 0,37kW to 1,85kW
<< (-18/-25 deg. C) from 0,74kW to 5,20kW
*** CANTEK INDUSTRIAL LINE ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Hermetic Compressor
<< (-5/+5 deg. C) from 2,22kW to 5,20kW
*** CANTEK MASTER LINE ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Semi Hermetic Compressor
<< (-5/+5 deg. C) from 3,70kW to 11,20kW
<< (-18/-25 deg. C) from 3,70kW to 22,30kW
This product is already sold in following countries: United Kingdom, Ireland, Germany, Norway, Denmark, Greece, Hungary, Romania, Russian Federation, Turkey, Cyprus, Azerbaijan, Kazakhstan
|
|
Monoblocks :
• EUROMON 600 > 4500 W
|
|
Cantek Multi-Compressor Systems are centrally operated systems designed to meet high capacity cold storage needs in a variety of applications in the most efficient and economical way.
|
|
The Grasso self-limiting Automatic Air Purger
The Purger removes non-condensable gases from the refrigeration system and as a result significantly improves the efficiency and the characteristics of any industrial refrigeration plant. The energy savings are usually so substantial that the initial investment in the purger is recovered over a very short period.
The plant is always working at its maximum efficiency reducing the running hours of compressors and condenser fans and therefore increasing the lifetime of the whole installation.
Features:
Economical
Fast payback
Energy saving
Environmentally friendly
Compact design (L700 x W330 x H450 mm)
Simple installation in new and existing refrigeration systems
|
|
|
|
|
|
Chillers of the ‚FL Series‘ - Environment-friendly and economic cooling
With the FL line JULABO presents the latest generation of chillers for routine cooling applications in laboratories and industry. 20 different models with cooling capacities from 1.7 kW up to 11 kW and numerous features offer the ideal solution for any application. The working temperature range covers –20°C to +40°C at a temperature stability of ±0.5°C. Four different pump types with flow rates of up to 60 l/min respectively and 6 bar pressure will meet any requirement. All units have an LED temperature display integrated into a splash water proof keypad for easy cleaning. An RS232 interface as well as an analog alarm output are located on the front panel and the lift-up cover placed on the top gives easy access to the filling port. An additional hinged tray serves as a compartment for the operating manual and other documents. The removable venting grid allows for easy cleaning of the condenser. All models include an easily visible level indicator. Models with a pump pressure of more than 1 bar additionally have a pressure gauge and feature a bypass to adjust the pump capacity. Venting slots are exclusively located on the front and back and allow placing the units directly next to each other.
|
|
|
|
|
|
Circulation chillers for professional use in research, technology and production at temperatures down to -30 °C
LAUDA circulation chillers of the WK class are used wherever process heat must be extracted quickly and reliably during chemical production processes or from technical equipment. The compact LAUDA WKL high-performance coolers are designed for temperatures down to -30 °C.
Fields of application: analytical devices such as electron microscopes, X-ray equipment, refractometers, distilling systems and AAS equipment · rotary evaporators and Soxhlet evaporators · vacuum technology · X-ray control systems, such as at airports, and semi-conductor systems · supply of cooling traps, e.g. for drying gases · central coolant supply for complete laboratories
Compared to cooling using mains water, the LAUDA circulation chillers of the WK class offer a consistent temperature, independent of the season and pressure fluctuations. A cooling temperature of down to -30 °C can be reached, this is not possible with mains water. And all that at ambient temperatures up to 40 °C. Saving water further protects the environment and reduces operating costs.
The circulation chillers of the WK class are available with different cooling and pump outputs as well as futher options like the RS 232/485 interface and various accessory parts.
The difference between circulation chillers of the WKL-class to the WKclass is that they also cover the temperature range below 0 °C. The powerful WKL 1200 to WKL 10000 W circulation chillers can reach temperatures down to -30 °C without any problems, and can be used e.g. for recondensation of solvent recycling or for cold traps.
|
|
RotaCool
Chiller with air-cooled refrigerating device, CFC- and H-CFC-free. Housing, evaporator (cooler) and tank made of stainless steel. Digital temperature adjustment and display, temperature stability 1K.
The Rotacool is a co-product of Heidolph and Huber. The Chiller, in space-saving L-design, is especially adjusted to the requirements of Heidolph rotary evaporators concerning cooling capacity and circulation quantity. However, rotary evaporators from other manufacturers can also be operated with this Rotacool.
MC-Controller:
Modern and easy to use microprocessor controller with a large temperature display.
Limited to essential functions only:
* Large temperature display
* LED indicators for pump, cooling and heating
* Simple operation using only 3 keys
|
|
TCU 40/80 Plus Temperature Control Unit
The TCU 40/80 Plus is a single channel temperature control unit which offers enhanced heat load capacity, which makes the unit ideal for the cooling of wafers during 300mm etch as well as other advanced semiconductor manufacturing processes. The system is designed for high reliability, up-time performance, and ease of maintenance, providing continuous trouble-free operation across wide temperature extremes for reduced cost of ownership. This, combined with the Edwards global service support organization, makes the TCU 40/80 Plus the new industry standard.
|
|
. Completely dismountable modular cold storage cabinet with standard net volumes of 1400, 2800 and 4100lt.
. Constructed with 80mm thick panels injected with polyurethane and designed for easier and quicker mounting.
. Available for both positive and negative storage temperatures.
. Tray holder, storage grill or glass door options
|
|
What makes our products extremely efficient is the possibility of being able to assemble prefabricated, modular systems at a great number of sites, before actually having to customize them.
ILKAZELL is known for its diversity, which guarantees that innovative solutions are available for all sorts of requirements and specifications. And our coldroom systems – designed for flexibility – utilize our partners' on site situation to the full.
What has proved extremely useful are our tongue-and-groove joints with foamed-in eccentric cam locks, which ensure 100 % tightness so that our products meet the highest hygienic demands.
The 180µm thin plastic coating makes surfaces particularly resistant to mechanical and chemical wear and tear and in addition prolongs the life of our products. Of course, all sorts of coatings are available – naturally also antibacterial ones
|
|
Toromont's history in the refrigeration business extends
back to 1935. Since then,we've delivered hundreds of
modularprocess refrigeration systems across the globe.
Our clients in the oil and gas industry have been
benefiting from our expertise since the 1970's.
Our customized systems range from 10 to 10,000 tons
(35 kW to 35 MW) of refrigeration capacity and use
a variety of refrigerants that can operate as low
as -150°F (-100°C).
We offer experience in propane, propylene and
ammonia-based systems.
|
|
Factory Packaged Refrigeration and Gas Compression Systems
Your plant-on-a-skid is easy to install and commission...
...and minimizes irritating issues in the field.
- Mounting, piping and wiring of all components in a controlled environment
- Testing of completed assembly in an ISO 9001 facility
- Painted with epoxy/polyurethane to withstand harsh outdoor conditions
- Suitable for hazardous area classification
- Designed for easy maintenance access
- Heavy-duty refrigeration plants with screw or centrifugal compressors for ammonia, halocarbons, hydrocarbons, CO2 and mixed gases
- Low-temperature refrigeration plants using cascade or compound pre-assembled units
- Refrigeration systems for the treatment and storage of natural gas, chlorine liquefaction, and gas condensation
- Gas compression systems for fuel gas, overheads, gas gathering, and boil-off
|
|
Cooling tunnel
Green anodes are handled, by means of swing trays hanging from an overhead conveyor or carriers’ conveyor
Cooling by water sprinkling and ventilation
Inspection and control post of the anodes density at the entry of tunnel
Blowing stoppers post at the tunnel outlet.
Mud basin for decantation buried and covered, optimized and compacted including:
2 gravel chambers (one in operation, the other for cleaning)
1 sediment chamber of fines equipped with a reserve grid for the floating ones
1 pumping chamber
|
|
*** Cantek Silent Condensing Unit ***
Basic Equipment, low cost solution for small cold rooms and refrigrated cabinets and displays.
- Hermetic Compressor
<< (-5/+5 deg. C) from 0,37kW to 1,48kW
<< (-18/-25 deg. C) from 0,74kW to 2,22kW
|
|
Compressor racks :
• MH 6 > 69 kW
• COMPACT 6 > 110 kW
• MOPSH - MOSC 9 > 400 kW
• MOVSH 70 > 700 kW
|
|
|
OLAER proposes a broad standard range of cooling systems to water and oil whose refrigerating power is from 1 to 50 kw. For higher powers up to 300 kw of the solutions are studied and implemented. The cold group will be presented for the first time to Paris to the Industries living room.
|
|
|
|
Refrigeration systems
