|
|
Toromont's history in the refrigeration business extends
back to 1935. Since then,we've delivered hundreds of
modularprocess refrigeration systems across the globe.
Our clients in the oil and gas industry have been
benefiting from our expertise since the 1970's.
Our customized systems range from 10 to 10,000 tons
(35 kW to 35 MW) of refrigeration capacity and use
a variety of refrigerants that can operate as low
as -150°F (-100°C).
We offer experience in propane, propylene and
ammonia-based systems.
|
|
|
|
|
|
Split Type Refrigeration Units
*** CANTEK COMPACT LINE ***
- Basic Equipment, low cost solution for small cold rooms and refrgrated cabinets.
- Hermetic Compressor
<< (-5/+5 deg. C) from 0,37kW to 1,48kW
<< (-18/-25 deg. C) from 0,74kW to 2,22kW
*** CANTEK COMMERCIAL LINE ***
- Advanced Equipment, professional solution for small and mid size cold rooms and refrgrated cabinets.
- Hermetic Compressor
<< (-5/ 5 deg. C) from 0,37kW to 1,85kW
<< (-18/-25 deg. C) from 0,74kW to 5,20kW
*** CANTEK INDUSTRIAL LINE ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Hermetic Compressor
<< (-5/ 5 deg. C) from 2,22kW to 5,20kW
*** CANTEK MASTER LINE ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Semi Hermetic Compressor
<< (-5/ 5 deg. C) from 3,70kW to 11,20kW
<< (-18/-25 deg. C) from 3,70kW to 22,30kW
This product is already sold in following countries: United Kingdom, Ireland, Germany, Norway, Denmark, Greece, Hungary, Romania, Russian Federation, Turkey, Cyprus, Azerbaijan, Kazakhstan
|
|
Split Systems :
• MINIPLUS 650 > 3500 W
• MAXICLIMA 2 > 22,5 kW
|
|
The superb conductivity of the steel belt,
combined with excellent mechanical
properties even below -200°C (-320°F),
its joint-free surface and the ability to
slide products smoothly and cleanly from
the end of the belt, all contribute to
make it pre-eminent in food processing
applications.
Sandvik contact freezing systems draw
|
|
These 19" fan trays with a height of only 1 HU can be used in control & computer cabinets to improve air circulation & prevent hot spots from forming.
Special features
High air volume
Long working life
Fan with roller bearing
Integrated thermostat
Ready to fit
Operational display
Rear plug connection
|
|
*** Cantek Shock Freezer Units ***
Extra Advanced Equipment, professional solution for shock freezing and blast freezing applications and process refrigeration
- Two (2) Stage Semi Hermetic Compressor
<< (-20/-45 deg. C) from 4,00kW to 22,30kW
This product is already sold in following countries: United Kingdom, Ireland, Germany, Norway, Denmark, Greece, Hungary, Romania, Russian Federation, Turkey, Cyprus, Azerbaijan, Kazakhstan
|
|
Sub-Zero Temperatures From Compressed Air
Using only factory compressed air, ITW Vortec's Vortex Tubes generate temperatures down to -40¢XC for spot cooling in a wide variety of industrial applications and processes. A Vortex Tube separates compressed air into hot and cold air streams, lowering the supplied air temperature by as much as 40¢XC and delivering refrigeration up to 6000 BTUH. With no moving parts to break or wear out, Vortex Tubes offer reliable, maintenance-free operation and easy installation. Various models are available for specific cooling requirements and, at only 150 mm to 330 mm long, they serve as a very compact, cooling component on machinery and equipment.
|
|
|
Meech Stainless Steel Vortex Tubes convert compressed air into two airflows, one extremely cold and the other extremely hot. Compressed air enters the spin chamber tangentially. This causes the column of air inside the tube to rotate at very high speed (up to 1 million rpm). The air at the outside of the column, moving very fast has a lot of energy and is hot. The air at the centre of the air at the centre of the column, moving relatively sowly has little energy and is cold. The hot outer air is bled of off at one end of the tube and and the cold inner air at the other. Vortex Tubes have no moving parts and can produce temperatures as low as 50°C below the inlet air temperature and as high as 110°C.
|
|
|
|
|
|
Vortex Tubes With Metal Generators, Stainless Steel Body:
Vortex Tubes are devices that work on a standard compressed air supply. Air enters the vortex tube and literally splits the air flow into two parts - cold air at one end, and hot air at the other - all without any moving parts.
Vortex Tubes have an adjustable valve at the "hot" end controls the volume of the air flow, and the temperature exiting at the cold end. By adjusting the valve, you control the "cold fraction" which is the percentage of total input compressed air the exits the cold end of the vortex tube.
Inside is the interchangeable brass "generator" which can alter the air used in the vortex tube, and control the temperature ranges you wish to have at the cold and hot ends. There are several ranges of generators for compressed air capacity. There are also two basic types of generators - one to produce the extreme cold temperatures (maximum cold temperature out called the C generator) and one type to produce the maximum amount of cooling (maximum refrigeration called the H generator).
WHY USE Frigid-X Vortex Tubes over others?
Vortex Tubes - Frigid-X are constructed of stainless steel and use a generator and valve made of brass and sealed with viton o-rings to allow their use in the widest range of environments. Others use plastic generators and standard Buna N O-Rings and charge extra for brass and viton. The unique design and quality of materials used in Frigid-XT™ products will deliver years of maintenance-free operation.
Frigid-X™ Vortex Tubes Advantages:
- No moving parts, reliable, maintenance free
- No coolant
- Compact and lightweight
- Low cost application
- Maintenance free units
- Instant cold air in environmental chambers
- No spark or explosion hazard
- Interchangeable generators
|
|
An effective, low cost solution to a wide variety of industrial spot cooling and process cooling needs. Using an ordinary supply of compressed air as it's power source, Vortex Tubes create two streams of air, one cold and one hot, with no moving parts. Cold airflow and temperature are controlled by adjusting the valve at the "hot" end using a simple screwdriver. Temperatures from Temperatures from -40 °F (-40 C) to +250 °F ( 110 C)
VORTEX TUBE ADVANTAGES
- No moving parts, reliable, maintenance free
- Compact and lightweight
- Instant on/off, easy to control, cools without waste
- No spark or explosion hazard
> > > > (SPECIFICATIONS)
- Streamtek Vortex Tubes are constructed of stainless steel and use a generator and valve made of brass. The unit is sealed with viton o-rings to allow their use in the widest range of environments. Others use plastic generators and Buna N O-Rings.
- Air flow rates up to 40 SCFM @ up to 2,800 BTU/Hr Refrigeration.
|
|
|
Vortex Coolers from ITW Vortec keep electrical cabinets and control panels cool, clean and protected. An affordable, maintenance-free alternative to air conditioners, the easy-to-install Coolers have no moving parts to wear out. Vortex Coolers incorporate vortex tube technology that uses filtered compressed air to produce a refrigerated air stream distributed throughout the enclosure. Unlike fans that pull in hot, dirty air, the enclosure Coolers maintain a light positive pressure inside the cabinet to effectively seal out the surrounding contamination, heat and humidity that can wreak havoc on sensitive electronic controls. Refrigerated air produced by the vortex tube enters the cabinet while hot air is expelled through a relief valve. Models are available to deliver up to 5000 BTUH of refrigeration. The UL-listed enclosure cooler systems are thermostatically controlled and are available in NEMA 12, 4 and 4X rated models.
|
|
|
Meech Air Technology Stainless Steel Cabinet Cooler Systems provide a cold air source to stop cabinets overheating and prevent ingress of contamination such as dust or moisture. When compared to fans that are commonly found in cabinets, Meech Cabinet Cooling Systems provide the ideal cooling solution. The Vortex tube is at the heart of the Cabinet Cooler. The cold air produced by the Vortex tube flows into the cabinet through the bulkhead fitting and is then ducted to a known problem component or to the centre of the cabinet. The hot air created by the opposite end of the Vortex tube flows to the atmosphere via a silencer.
|
|
Cabinet Enclosure Cooler - Frigid-X™ series for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.
Cabinet Enclosure Cooler - Frigid-X™ series are compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.
Cabinet Enclosure Cooler - Frigid-X™ series are ideal for all NEMA 12 and NEMA 4 rated panels.
Cabinet Enclosure Cooler - Frigid-X™ - Advantages:
- Low in cost
- Compact
- No CFC's
- Fast installation
- Stabilize enclosure temperature and humidity
- Virtually maintenance free (No Moving Parts)
- Mounts in a standard electrical knockout
- Stops heat damage and nuisance tripping
- Eliminates fans and filters
- Prevents dirt contamination by keeping enclosure at positive pressure
- Units applicable to all environments including high temperature to 200ºF
|
|
|
|
|
|
Using our extremely low-cost, reliable Vortex Tube, STREAMTEK Cabinet Panel Coolers will purge AND cool electronic/electrical enclosures with filtered air that's up to 45F colder than the compressed air supply. Built into the cooler is a relief valve that exhausts the hot air from the cabinet, while the cooler continues to supply clean cold air. Our Cabinet Panel Coolers are ideal for all NEMA 4/4X and NEMA 12 rated panels. They mount in minutes through a standard knockout.
ADVANTAGES - CABINET PANEL COOLER
- Virtually maintenance free (No moving parts).
- Low in cost, compact, and No CFC's.
- Mounts in a standard electrical knockout.
- Prevents direct contamination by keeping enclosure at positive pressure.
- Units applicable to all environments including high temperature to 205ºF.
SPECIFICATIONS - CABINET PANEL COOLER
- Streamtek's Cabinet Panel Coolers are constructed of stainless steel and use a generator and valve made of brass. The unit is sealed with viton o-rings to allow their use in the widest range of environments. Others use plastic generators and Buna N O-Rings.
- Air flow rates up to 40 SCFM @ up to 2,800 BTU/Hr Refrigeration.
- Cabinet Panel Cooler systems include cooling unit, filter, cold air distribution kit, thermostat, and solenoid valve.
|
|
|
EXAIR Cabinet Coolers are a low cost, reliable way to cool and purge electronic control panels. They provide air conditioning for the electrical enclosures, eliminating electronic control downtime due to heat, dirt and moisture! These panel cooling systems for enclosures incorporate a vortex tube to produce cold air from compressed air - with no moving parts. The compact Cabinet Cooler is an easy to use air conditioner that can be installed in minutes through a standard electrical knockout. NEMA 12, 4 and 4X Cabinet Coolers that match the NEMA rating of the enclosure are available in many cooling capacities for large and small control panels.
|
|
|
Coldstream Air Guns from Meech Air Technology provide a cold airflow that is commonly used for spot cooling. The Vortex Tube is a the heart of the Coldstream Gun, encased within hot and cold end silencers. The cold air produced by the vortex tube is easily directed on to the area to be cooled by use of the knuckle trunking. The hot air created by the opposite end of the Vortex tube flows to the atmosphere via a silencer. The cold airflow can be as low as 50°C below inlet air temperature and be maintained to +/- 0.6°C.
|
|
Adjustable Spot Cooler - Frigid-X™ is a low cost and maintenance free Adjustable Spot Cooler system which utilizes a vortex tube to produce cold air at one end.
Adjustable Spot Cooler - Frigid-X™ temperature can be adjusted using a knob at the hot end to set the temperature precisely to your requirements. Temperatures range from approximately minus 30ºF to room temperature and can be easily set with a thermometer.
Adjustable Spot Cooler - Frigid-X™ comes with three brass generators for flow rate adjustment - 15 SCFM (425 SLPM), 25 SCFM (708 SLPM) and 30 SCFM ( 850 SLPM) providing refrigeration up to 2100 BTU/hr (615 Watts).
Features:
- No moving parts or electricity
- Compact and lightweight
- Low cost
- Maintenance free
- Instant cold air
- Quiet
- Magnetic base
- Interchangeable generators
|
|
An effective, low cost solution to a wide variety of industrial spot cooling and process cooling needs. Using an ordinary supply of compressed air as it's power source, Vortex Tubes create two streams of air, one cold and one hot, with no moving parts. Cold airflow and temperature are controlled by adjusting the valve at the "hot" end using a simple screwdriver. Temperatures from Temperatures from -40 °F (-40 C) to +250 °F ( 110 C)
VORTEX TUBE ADVANTAGES
- No moving parts, reliable, maintenance free
- Compact and lightweight
- Instant on/off, easy to control, cools without waste
- No spark or explosion hazard
SPECIFICATIONS
- Streamtek Vortex Tubes are constructed of stainless steel and use a generator and valve made of brass. The unit is sealed with viton o-rings to allow their use in the widest range of environments. Others use plastic generators and Buna N O-Rings.
- Air flow rates up to 40 SCFM @ up to 2,800 BTU/Hr Refrigeration.
|
|
Vortex Tubes and Spot Cooling Products
EXAIR's stainless steel Vortex Tubes convert an ordinary supply of compressed air into cold air at -50°F (-46°C) on one end, up to 260°F (127°C) on the other. There are no moving parts or refrigerants. They are commonly used to cool electronic controls, machining operations, gas samples, environmental chambers and more.
|
|
|
|
|
|
-------------------INDUSTRIAL LINE----------------------------------
*** Cantek Wall Through Monoblock Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Hermetic Compressor
<< (-5/ 5 deg. C) from 2,22kW to 5,20kW
*** Cantek Straddle Type Monoblock Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Hermetic Compressor
<< (-5/ 5 deg. C) from 2,22kW to 5,20kW
-------------------MASTER LINE----------------------------------
*** Cantek Wall Through Monoblock Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Semi Hermetic Compressor
<< (-5/+5 deg. C) from 3,70kW to 11,20kW
<< (-18/-25 deg. C) from 3,70kW to 22,30kW
*** Cantek Straddle Type Monoblock Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Semi Hermetic Compressor
<< (-5/+5 deg. C) from 3,70kW to 11,20kW
<< (-18/-25 deg. C) from 3,70kW to 22,30kW
These products are already sold in the following countries: United Kingdom, Ireland, Germany, Norway, Denmark, Greece, Hungary, Romania, Russian Federation, Turkey, Cyprus, Azerbaijan, Kazakhstan
|
|
-------------------INDUSTRIAL LINE----------------------------------
*** Cantek Wall Type Split Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Hermetic Compressor
<< (-5/ 5 deg. C) from 2,22kW to 5,20kW
-------------------MASTER LINE----------------------------------
*** Cantek Wall Type Split Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Semi Hermetic Compressor
<< (-5/+5 deg. C) from 3,70kW to 11,20kW
<< (-18/-25 deg. C) from 3,70kW to 22,30kW
This product is already sold in following countries: United Kingdom, Ireland, Germany, Norway, Denmark, Greece, Hungary, Romania, Russian Federation, Turkey, Cyprus, Azerbaijan, Kazakhstan
|
|
APEX high-perfprmance water coolers are freestanding and compact. Thy are designed and installed to control specialist processes ( electro-spindles, linear motors, laser, electron guns, vacuum pumps, etc ).
Special coolers have been developed for coolant fluids (emulsion and cutting oil).
RLB RLBE and RLBH range : 400 - 6000 KW cooling power.
|
|
* Synoptic of operation on LCD screen
-Display of the exit water temperature
-Status of the Chiller : on/off
-Status of the pump : on /off
* Synoptic of alarm on LCD screen
-Therma alarm of the compressor
-Alarm of low water level in the tank
-High and low alarm of the refrigerant pressure
Ø allow to know and repair the breakdown very quickly and thus reduce at the maximum the downtime.
|
|
Chilly: Cooling water - Industrial compact water chiller
Standard equipment
Waterlevel control outside
Stainless steel coil evaporator
High tech. scroll compressor / low noise
High efficiency air cooled condensor
Digital thermostat hysteresis +/- 1,0 K
Refrigerant circuit with TÜV approved high pressure switch
Chiller IP 44
Operating temperature max. 42° C ambient
Plastic water tank
Draining through water level control
Environment friendly refrigerant R 407 c
Internal by-pass for pump protection
Non ferrous water circuit
CE-Standard / ISO 9001 / EN 60204
Grundfos/Speck pumps
Water connection quick cuppling
Options:
Water outlet manometer
Waterlevel switch for pump-protection
Common alarm (potetial free)
2 x water inlet / outlet
Special voltage
Flow switch
Autom. fresh water supply
|
|
|
The gwk compact chiller weco with air or watercooled condensers of up to 250 kW cooling capacity are developed in various technical designs and with more than 20 different performance gradings.
|
|
| ... products without technical information |
| |
|
|
Refrigeration systems
