|
|
The M&C gas coolers are used in gas analysis to lower the dew point of humid gas to avoid condensation in the analyser(s).
An extremely stable and low gas dew point avoids water vapour cross-sensitivity and volumetric errors.
Water coolers are also available.
|
|
|
High pressure reactors can be customized with sightglasses, liners & high pressure analytical probes. Ease of cleaning & elimination of foot bearings reduces the risk of cross-contamination. It has indefinite service life & improved experimental repeatability compared to non-stirred autoclaves, laboratory bombs & reaction kettles. See AE Closure Ultra High Pressure Reactors for pressures above 5,000 psi (379 bar). See Easy Open Laboratory Reactors for pressures of 3,300 psi (227 bar) or less.
|
|
|
|
|
|
Parr's Series 5500 High Pressure Compact Laboratory Reactors (HPCL reactors) are based upon our popular micro and mini, Series 4590 & 4560 reactors for chemical reactions under elevated temperature and pressure. This stirred reactors feature a smaller, more compact magnetic drive and variable speed stirrer motor that is directly coupled to the magnetic drive.
These designs are ideal for not only investigators with limited space or budgets, but also by investigators building multiple reactor installations for combinatorial chemistry or high throughput investigations.
The reaction vessels used in these new HPCL reactors are identical to the ones furnished in the Series 4590 micro reactors and the Series 4560 mini reactors. HPCL reactors use the popular Parr split ring closure. These vessels are rated for a maximum working pressure of 3000 psi. The maximum operating temperature is dependent upon the seal selected, PTFE gasket for up to 350 °C; with FKM O-ring to 225 °C or FFKM O-ring to 275 °C.
The 25, 50, and 100 mL reactors are equipped with gas inlet and outlet valves, a liquid sampling valve, pressure gage, safety rupture disc and internal thermocouple in addition to the internal stirrer. The 300, 450 and 600 mL reactors provide an internal cooling loop in addition to these fittings.
|
|
|
Parr offers over 100,000 possible combinations of stirred reactors with volumes ranging from 25 ml to 5 gallons. An extensive choice of designs can efficiently and cost-effectively meet the individual user's operating requirements with pressures up to 5000 PSI for operating temperatures to 500ºC. And that's before we even start to talk about customization.
|
|
Hot Plates
The industrial hot plates shown here are our robust standard design, for general laboratory use.
Thermostat control to 300ºC.
Digital control to 400ºC.
Top plate 8mm mild steel, but stainless steel or aluminium on request.
Casing and terminal box in stainless steel .
Size 1 = 305mm x 305mm.
Size 2 = 305mm x 610mm .
Size3 = 305mm x 915mm
Power supply 240 volts single phase.
Other sizes and applications for our industrial hot plates are available on request.
|
|
Does your application lie between 8 °C above room temperature and 90°C with controllable humidity? Then the Memmert humidity chambers HCP are unbeatable in price, performance and comfort. The almost unlimited programming of temperature profiles makes possible ideal environmental conditions for the load. Your decision criteria: 3 model sizes (108l, 153l and 246l); State-of-the-art control technology based on the P performance class for all models; An active humidity control system is integrated as standard in all models; Double doors standard for all models: Prevention of contamination and drops in temperature, with at the same time an optimal view of the sensitive load through wide-area interior glass doors.
For the HCP, the tried and tested Memmert heating concept was again perfected: heating the working chamber from all six sides, along with the electronic humidity control, is decisive in preventing condensation from forming in the working chamber.
|
|
HUMIDITY CABINET
humidity cabinets allow to run 100% relative humidity tests with condensation on specimen
Humidity cabinet allow to evaluate
* organic coating (paints) humidity resistance
* metals and inorganic coating rusting resistance
TESTS
ASTM D 1748, ASTM D 2247
other tests on request
FEATURES
* double walled thermostatic tank with constant 100% relative humidity
* temperature up to + 70 °C
* hydraulic sealing
* air inflator, with porous diffusers, situated on the tank bottom and dipped in the water
* air flow meter with airflow until 3 m³/h
* external tank with automatic level for distilled water supply
* heating by electrical resistances
* electronic thermoregulator for temperature control
* stainless steel AISI 304 specimen support
|
|
Techne Dip and Flow coolers are designed for use at below ambient temperatures down to -35°C.
The Flow Coolers work in conjunction with a Techne thermoregulator (excluding TU-20HT). They continually extract heat from the bath fluid by means of the heat exchanger which is built into the unit.
The cooling head of the Techne Dip Coolers fit neatly and unobtrusively into the corner of the standard circulating bath and can be secured with a specially designed mounting bracket. Even if cooling can be achieved by cold tap water, a dip cooler is recommended as it conserves water and is easier and more convenient to use.
|
|
|
Immersion Cooler with air-cooled refrigerating unit. Housing of stainless steel with 2 handles, condensing probe of stainless steel, flexible cooling connection line in special single-tube construction, protective hose with smooth surface. The refrigeration unit works continiously.
|
|
|
Complete solution for nanoparticle and hyperthermia research. Package consists of EASYHEAT 1kW to 10kW power supply with frequency range of 150kHZ to 400kHZ, 3 coils especially designed for hyperthermia research, fiber-optic temperature sensor with optional controller, serial data-link cable to your PC and plastic and glass vials with insulating paper
|
|
|
|
|
|
Maximum operating temperature of 1100°C
Chamber capacity of 6, 14 or 23 litres
Powerful free radiating coiled wire elements on both sides of the chamber ensure good temperature uniformity
Constructed with rigidised low thermal mass insulation for rapid heating
Heats up to operating temperature in a quarter of the time of traditional "slab" designs
Hard ceramic hearth provides robust base, which can be replaced in the event of spillage
Drop down door can be used as shelf for loading/unloading
Postive break door safety switch isolates chamber from power supply, when the door is opened
Double skinned construction allows convection air flow to cool the outer case, to conform to EN61010 safety standard
Ideal for light duty applications requiring good thermal response
Applications in general industry include, ferrous metal heat treatments; annealing, hardening and tempering
Applications in quality control include, testing of component materials or finished products
Applications in coatings manufacturing include, testing coatings for resistance to fire, and longevity testing of finished coatings
Click for specification details
These models are not designed for ashing/burn-off purposes - please see following bullet points for information
For ashing furnace information, please click here
For burn-off furnace information, please click here
|
|
Laboratory Furnaces 1200°C
The laboratory furnaces are used for a large number of high temperature treatments: burning, degassing, pre-heating, hardening, tempering, annealing of metals, stress relief, stabilization, tests ... in many branches of industry.
PERFORMANCES:
- Temperature range: up to 1200°C
- Electronic PID controller
- Ramping to set up temperature
- Temperature fluctuation: less than ± 1°C
CONSTRUCTION:
From compact design, Control panels are at the bottom part of the furnaces to minimise their size.
The inner casing is made of ceramic fiber.
The outer casing is made of stainless steel.
The optimized heat insulation is made of ceramic fiber totally asbestos-free, ensuring efficient operation, low external temperature and excellent thermal stability.
In addition to the insulation, double skin design with air gap be- tween the insulated chamber and outer body keeps the outer body at low temperature, especially the door.
|
|
Furnace High Temperature Thermo Scientific Heraeus
------------------------------------------------
The performance ensured, year after year
The Furnaces high temperature Thermo Scientific Heraeus are designed to cover all your requests, including most rigorous.
Choose the solution which is appropriate to you perfectly, among a vast choice of options and our two modes of heating: furnaces with rooms and muffle furnaces.
With temperatures reaching 1.100°C, they guarantee to you:
an unequalled reliability
a maximum safety
an optimal comfort of use
More on the range of furnaces Thermo Scientific, promotions in progress, to contact our customer service, or to download booklets, go on:
www.thermo.com/hot
|
|
Universal precise laboratory electric furnace SNOL 7,2/1300 is designed for materials heat treatment, ceramic and stoneware samples fairing.
Furnace can be used in laboratories, medicine, educational institutions, ceramic studios, and industrial laboratories.
•Micro processor temperature controller
•Excess temperature controller
•Ceramic chamber
•High quality thermoinsulation materials
•Door interlock switch
•Low power consumption
•Ceramic bottom plate
•One year limited warranty and later service
•Two years limited warranty for temperature controller and latter service
•Available connection to PC
|
|
· Definition : electric chamber furnace for all high temperature applications
· Construction : robust construction of bent plate. Vertical opening door with safety switch.
· Insulation : multilayer insulation with refractory bricks.
· Heating : Kanthal Super type heating elements.
· Electricity : 1 x 400V, 50Hz up to 7 kW, 2 x 400V after 7 kW.
· Regulation : 1 thermocouple with Axron PID temperature controller.
· Documentation : certification CE and operating instructions in English.
|
|
Maximum operating temperatures of 1700°C or 1800°C
1700°C chamber capacities of 3 or 10 litres
1800°C chamber capacities of 4 or 8 litres
Powerful MoSi2 elements located on both sides of the chamber ensure good thermal uniformity
Thick diameter MoSi2 elements can withstand the stress of everyday operation and provide good longevity
Low thermal mass insulation and good element design is used to ensure energy efficiency and rapid heating
Manually operated vertical counter-balanced door keeps hot door insulation away from operator
Postive break door safety switch isolates chamber from power supply, when the door is opened
Double skinned construction allows fanned air flow to cool the outer case, to conform to EN61010 safety standard
Eight segment programmer is fitted as standard, with options for other types
Adjustable overtemperature protection is fitted as standard
|
|
Furnaces High Temperature Thermo Scientific Barnstead
__________________________________________________
Formerly recognized under the name of Thermolyne, the range of furnaces high temperatures Thermo Scientific Barnstead proposes to you all the solutions for your needs for heating.
Samples, metals, glass, Analyzes gravimetric, treatment by heat, tests...
The apparatuses were designed with a maximum of option, in order to bring an ideal answer to each one of your needs.
Furnaces with rooms
Muffle furnaces
Tube furnaces
Temperatures going of 975 with 1.700°C
Capacity between 1,3 and 45 liters
Perfectly sure, and of an exemplary reliability, you will find there the solution which corresponds perfectly to your needs.
More on the range of furnaces Thermo Scientific, promotions in progress, to contact our customer service, or to download booklets, go on:
www.thermo.com/hot
|
|
Microbiological incubators with forced convection
BINDER BF series:
Premium equipment for all gentle incubation applications, including processing large numbers of samples at high throughput. Outstanding dynamics keep the required temperature virtually stable with homogenous distribution, irrespective of how many times the door is opened.
|
|
|
The INHECO Incubator MP is an automated and compact incubating position for one standard SBS Microplate. The Incubator MP can be used as a stand-alone device, or stacked to form a tower of up to 6 units. Even stacking of different devices of the Inheco Incubator family in one tower is possible, the devices in the tower can be controlled through the master-slave principle.
|
|
|
|
|
|
INHECO part # 8200010
The INHECO Automated Hotel
is an automated and compact 12 position incubator for standard SBS disposables like Microplates, Half Deep Wells and Deep Well Plates. The Automated Hotel offers quick and direct access to each of the 12 storage positions by automated controlled drawers for loading and unloading. Precise temperature control and drawer positioning sensors guarantee an excellent customer value. The unit is a plug-and-play high performance peltier device.
It is mainly used on or besides robotic platforms and systems in LabAutomation to form a self-contained temperature controlled area for up to 12 Micro or Deep Well Plates. The automated drawer system offers direct and easy access by robotic grippers for loading and unloading and even direct access with pipetting heads. The lid is turning 90° after opening the drawer to enable easy portrait and landscape gripping.
The INHECO Automated Hotel is designed for the use in fundamental research, drug discovery, clinical research and diagnostics in the life science market. The Automated Hotel is tested for the operation with a large number of established LabAutomation systems, primarily:
Caliper: Sciclone, Twister
Hamilton: Star, iSWAP
Perkin Elmer: Janus, Multiprobe II
Product Article No. Dimension W x D x H (mm) Weight (kg) Temperature Range
Automated Hotel 8200010
|
|
|
|
|
|
Refrigerated table and floor incubators WPLR Series.
Incubators for biomedical and scientific laboratories with digital electronic heating and refrigeration control.
WPLR incubators are meant for the conservation of biological and non-biological material at controlled temperatures and are indispensable every time a constant ambient temperature must be created for biological experiments in medicine, for environmental protection analyses, in sanitary and epidemic prevention, in the agri-food, chemical and pharmaceutical industry and in scientific research in general. The incubators can be used for the growth of microorganisms, for germ and mould cultivation, for storage of serums and biological material in general, for the determination of the BOD in water analysis, and for the cultivation and growth of vegetal organisms. Therefore they are used in all hospital laboratories, in laboratories for scientific research, for chemical and clinical analyses, and in the quality control activities of agri-food, pharmaceutical and chemical industries.
All models are designed and built according to the ISO 900:000 International Quality System and created in accordance with CE Mark European safety standards and UNI-EN-600 for laboratory equipment.
|
|
Our I incubators are ideal for all applications with temperatures up to 70 °C - specifically for incubating living cultures at 37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are completely ruled out, a valuable load is therefore warmed up particularly carefully. To minimise the danger of samples drying out we have designed our heating concept so that an optimum temperature uniformity in the working chamber can also be achieved without forced air circulation, just using natural convection. Your decision criteria: 7 model sizes (32l to 749l); 3 performance classes Basic/Excellent/Perfect; Double doors (interior glass, exterior stainless steel) for a clear view without a drop in temperature.
|
|
|
|
|
|
The flexibility you need with the quality you expect from an established world leader in temperature control instrumentation. Ideal for blotting techniques in which RNA and DNA or protein are immobolised onto nylon nitrocellulose filters.
Hybrigene HB-3D
-Temperature range from 10°C above ambient to 80°C
-High capacity which can hold up to 16 mini or 4 large glass tubes
-Flexibility at an affordable price, offering excellent temperature accuracy and uniformity
-The Hybrigene is the compact, stackable alternative to the Hybridiser HB-1D - for when space is important and throughput is not the priority
-Stack up to 3 ovens, saving on valuable laboratory space
Hybridiser HB-1D
-The famous Hybridiser HB-1D is compact, easy to use and provides complete protection from hybridisation hazards
-A temperature range of +10°C above ambient to 100°C
-High capacity which can hold up to 24 mini-tubes or 6 unique large tubes
-Hybridisations can be performed with a minimal volume of 5ml of probe
-Adjustable feet to enable accurate leveling
-Unique double-glazed glass door; quiet and safe, providing durable protection
|
|
Biochrom Thermostar Shaker Incubator
Small bench-top shaker incubator ideal for controlling the incubation of microplate based assays e.g ELISA.
- Wide temperature range from ambient to 45 degrees C.
- Easy to use and control
- Incubates up to 4 microplates
Ideal for laboratories with fluctuating temperature.
This shaker incubator can also be used with test tubes with the optional 56 tube adaptor
|
|
|
|
|
|
The high temperatures in the oilbath demand a finely-tuned temperature control as well as multiple overtemperature protection. Apart from the electronic adjustable overtemperature controller, a wide range of visual and acoustic signals (for example if the filling level is too low, for overtemperature, but also for input acknowledgement or the end of the programme) ensure smooth-running test procedures. Choose from: 6 model sizes (7l to 45l); A extensive range of optional accessories, e.g. flat or gable lid, reversible shelf, test tube racks; State-of-the-art control technology of the Excellent performance class for all models.
The superior heating concept of the Memmert ovens is also to be found in the oilbaths. Protected from fluids, but still close to the load, the heating lies under deep drawn and easy to clean ribs. Through the positioning of the heating elements in the floor and side walls, a natural mixing of the tempering fluid arises, providing better temperature uniformity in the bath.
|
|
Drying ovens with natural convection
BINDER ED series:
Routine drying and sterilization applications up to 300° C and storage at precisely controlled elevated temperatures are the strengths of ED drying ovens. Because of the natural air circulation with a high rate of air exchange, thermal processes run with significantly increased efficiency.
|
|
Maximum operating temperatures of 400°C, 500°C & 600°C
Chamber capacities of 30, 60 & 120 litres
Good temperature uniformity
Fast heat up and recovery times
Polished stainless steel interior
Stainless steel shelves with multi position settings
Choice of controllers & programmers
|
|
|
The LBB pass through features a combination of horizontal and vertical airflow that offers excellent temperature uniformity at a moderate price. It is recommended for a variety of laboratory and production applications including drying and curing.The LBB is designed and manufactured to provide years of dependable service. Corrosion-resistant stainless steel interior and nickel plated shelves clean up easily. The motor is permanently lubricated and virtually maintenance free. And Despatch warrants the heater performance for a full five years - the best warranty in the industry. Every LBB oven is UL and C-UL listed, and receives a thorough performance test before shipping.
|
|
|
|
|
|
Fan-assisted digital electronic sterilizers.
Forced air convection operation
Working range: from +°C above ambient T to +00°C
MAXIMUM TEMPERATURE +300°C
T stability: <±1°C compared to all set point values.
This sterilizer is recommended for all laboratories dealing with devices and products sterilized with hot air: hospitals, analysis laboratories, food and pharmaceutical industries, research centres, etc.
Internal chamber and shelves in glossy AISI 0 stainless steel, external cabinet in brushed AISI 0 stainless steel sheet. Therefore, high mechanical characteristics, good resistance to corrosion and extremely easy cleaning. Each appliance is equipped with racks to position AISI 0 perforated stainless steel shelves (therefore height-adjustable). Internal architecture suitable for creation of a controlled air flow, by means of centrifugal blower: this ensures an optimum internal T distribution inside the chamber and therefore an optimum temperature uniformity, as well as accelerating drying operations. Door equipped with closure with lock and key. Sealing in silicone rubber, for high temperatures, long lasting and easy to clean and replace. W07AC and W08AC models have wheels (front wheels with brake) equipped standard. Insulation with special reinforced mineral fibre panels for high temperatures. Asbestos free. The efficiency of the thermal insulation ensures low temperatures on the outer surfaces and low energy consumption.
|
|
|
|
Thermal equipment for laboratories
