|
|
|
|
|
|
|
Automatic vertical packaging machine designed to form-fill and seal stick packs (3 side seal) starting from a single reel of packaging material. Rapid size change by substitution of forming tubes only. Complete with: forming tubes in stainless steel - Photocell for print centering - heated bar sealing with constant temperature controlled by independent thermo-regulators for each lane integrated by PLC - Mobile support for the sealing and forward movement of film controlled by brushless servomotor - Stop machine at end of reel and motorized unrolling of the same. Operations controlled by PLC and Modem for remote troubleshooting. Visualization from the panel: temperature of the finn sealers and of the heated bars - production speed - number of sticks produced - alarms, etc. Settings carried out from the control panel: output speed, seal temperature, enabling of devices eg. printer, agitator, vibrator, photocell, etc. Safety protections with Power cut-off if doors are opened. Electrical control cabinet according to the norms in force. All parts in contact with the product are in AISI 316L stainless steel.
|
|
The TUBE model packaging machine is a machine with alternating movement that forms, fills and seals stickpacks. These sachets, sealed on 3 sides, are a tubular shape, called “sticks”, or a pyramidal shape, called "tetrahedrons". The machine body is made from anodized aluminium and stainless steel. The parts that come into contact with the product are made of stainless steel. The good quality of the materials used and the cantilever sealing areas allow easy cleaning and high versatility for disassembly. The machines are equipped with a PLC and control display to constantly monitor the dispensing parameters and make the transformation process from stick to tetrahedron quick and easy.
Dosing Unit: volumetric (adjustable).
Products to be packaged: flowing powders and granular products.
Depending on the width of the stickpack, the machine is produced with 2 to 20 lanes.
|
|
FW3430/B
- Three side seal bag, it makes the entire face of pack available for impact and branding messages.
- Hygienic cantilevered open construction under main frame allows products crumbs to fall through the wrapper.
- Box motion end sealer model for hermetic seal package.
|
|
FW3430/B
- Three side seal bag, it makes the entire face of pack available for impact and branding messages.
- Hygienic cantilevered open construction under main frame allows products crumbs to fall through the wrapper.
- Box motion end sealer model for hermetic seal package.
|
|
Automatic vertical packaging machine designed to form, fill and seal on 4 sides sachets of thermosealable material. Constructed with a modular system to facilitate rapid size change operations.
The machine frame is constructed in specially treated and hardened aluminium, all parts in contact with the product are in AISI 316L stainless steel.
The reel of packaging material is housed inside the machine, completely enclosed and protected from external contamination; the reel shaft is positioned to permit easy mounting.
The machine comprises 3 Brushless servomotors.
Basic operations are controlled by means of the PLC interfaced with a display panel.
|
|
Automatically forms, fills, and seals 4-side seal sachet
Adjustable vertical sealing dies to accommodate a single pack width
Auger style product filler
Horizontal sealing dies with air operated cut-off knife
Single laminate roll unwind unit with constant tension arm and guide rollers
Photo eye registration to ensure correct positioning of the film in the sealing area
Accurate sealing die temperature controls with fully controllable die pressure
Comprehensive control panel with cycle counter
Tear cut in vertical seal
Servo or Mechanical drive system
Full safety guarding
Metric construction
Machine Speed: up to 50 cycles per minute
Deboss coding is also available
Pack Widths: 30mm to 260mm
Pack Lengths: 30mm to 255mm
|
|
FOUR SIDE SEAL MULTILANE MACHINE MODEL PS-4
Vertical Form Fill Seal
Model PS-4
Features
- Handle all kind of product
- The machine can be supplied with auger filler, cups unit, counter system, and other special filling machine.
- The bag length is electronically adjustable as required on the machine itself while it running. And it can be varied with in 1 mm.
- Photo cell to center the print.
- End of reel detector.
- Easy cleaning and access all parts.
- Vertical knife can be easy take out for grinding.
- The sealing jaws are constant heat control by PID temp' controller.
- Photo cell to center the print.
- Conveyor to discharge the bag
- Control by PLC with touch keyboard.
|
|
PBV2
PBV 2 is a multi-line continuous motion vertical form, fill and seal machine which is used for packing of fine, loose and particulate materials as well as liquids and semiliquids into flat bags. Drive of the machine is electromechanic, the secondary functions are controlled by pneumatic. This machine is equiped with SIEMENS control system.
Equipment options:
Volumetric doser
Auger doser
Slide-valve doser
Doser for liquids
Doser for semi-liquids
Heat sealing bars
Infeed conveyor
Outfeed conveyor
Dividing and counting of bags
Photo electric eye for print registration
Printer
Inkjet printer
Gas flushing
Metal detector
|
|
|
|
|
|
Multi-purpose machine with TWIN- DOSING- SYSTEM for all product types in four-side-seals, single-dose sachets.
The OMAG C3/1, one-lane-version, is the most versatile machine of the C3 product line.
It can be used for all product types and, without changing parts, is able to produce sachets dimensions from minimum 50 x 85 mm up to a maximum of 140 x 220 mm, with doses from 1 to 250 cc.
It can be equipped with different dosing systems:
Volumetric filler (for free flowing granular products)
Auger filler (for non free flowing powdery products)
Pump filler (for liquid, viscous and pasty products)
Vibrating filler with counting unit (single units/pieces)
In its Two-lanes-version, namely OMAG C3/2, the sachets dimensions can range from a minimum of 45 x 70 mm to a maximum of 70 x 150 mm, with doses from min. 1 to max. 50 cc.
The picture shows the machine fitted with telescopic cup dosing system for granules and free flowing products. The second filler, by auger filler, for powders and non free-flowing products, can be easily rotated aside and re-set on working position in a few minutes.
PLC- Control-program system + keyboard OMRON TOUCH SCREEN allows to set up and modify the synchronism of the machine and memorize up to 10 different working programs.
|
|
|
Sigpack Systems flat pouches are distinguished by extremely high weight accuracy and perfect, hermetical seals. For this reason, their main areas of application lie in the packaging of high-quality powders and granules from the pharmaceutical, chemical and food industries.
|
|
FW3431FS/B
- Four side seal bag, it makes the entire face of pack available for impact and branding messages.
- 2 different film materials can be used for your product wrapping.
- Box motion end sealer model for hermetic seal package.
|
|
FW3431FS/B
- Four side seal bag, it makes the entire face of pack available for impact and branding messages.
- 2 different film materials can be used for your product wrapping.
- Box motion end sealer model for hermetic seal package.
|
|
The Mascotte is the vertical packaging machine simple, economical, handy, which allows, with a single operation, to macke the bag directly from th eroll, to fill it and to cut it. Loose items or single pieces which are
to be packed should be put in the shaping collet access space by hand or with the help of bathcers or pieces counters.With a single action you can obtain: a vertical welding which fixes the tubular; cutting and
ejection of the package.
Advantages: - bags are not to be prefabricated: they are automatically made starting from the plane sheet roll; - with one lever you can master the mechanical operations; - the tralling
of the film and the length ot the bag is made by hand. Ideal for every kind of foodstuffs, metal or electric smallware, etc.Materials available: polyetylene, polypropylene.
|
|
Packaging machine W18 :
Compact vertical packaging machine.
Processes polyethylene flat film.
Throughput: up to 40 bags/min.
Bag width: up to 180 mm
Bag length: infinitely variable
Passage Clearance: 90 mm
|
|
Bagging machines of the Form Fill and Seal type manufacture the bag either from a plastic tubular film with a gusset (FFS) or from a flat film (VFFS).
A range of metering-weighing devices installed upstream prepares the doses before filling (net weight).
|
|
Horizontal Form, Fill and Seal Bagger
FFS Series
Fully automatic system designed for bagging a wide range of products into bags made from a roll of center-folded film (U film). Numerous bag options available (handles, zip, corner seals, etc.). Capacities up to 32 BPM.
|
|
|
|
|
|
The Form Fill and Sealing Machine EVX260, is a small/middle format equipment offering a high performance and versatility useful to pack from a few grams up to 2 or 3 kg of product depending on its density.
Features:
Bag width: From 60 to 260 mm
Bag length: From 60 to 500 mm (800 mm in option)
PRODUCTION: 100 bags/min (Depending on the kind of bag)
Wrapping material: Polyethylene and complex
Sheet Pulling: By belts (vacuum optional)
Drive: Pneumatic (Servomotors in option)
Construction: Parts in contact with product in stainless steel (optional the whole machine).
Control: Electronical through microprocessor
MEASURES
Air machine: 30 lits./mm.
Air seailing: 40 lits./mm.
Water (PE only): 80 lits./h.
Energy power: 4 kVA.
HEIGHT: 1.400 mm
WIDTH: 1.285 mm
DEPTH: 1.910 mm
Pillow bag, strings, gusseted bag, display, flat bottom bag, handles, 4 sealing bag, squared, pocket bag with adhesive
Options :
Automatic reel correction, pulling with vacuum, antistatic unit, bottom vibrator, gas injection, vacuum printer, equipment to provide adhesive tape or zipper ...
|
|
The FFS system forms bags from an endless gusseted tubular film, fills and seals them - rationally, automatically, precisely, ecologically, safely and inexpensively.
The results are compactly filled block-shaped bags that can be stacked onto pallets easily - especially thanks to the optionally integrated corner welding device that seals the gussets diagonally. The bag bottoms are perfecly formed.
Machine output:
FFS ALPHA
up to 500 bags per hour (net variant)
up to 300 bags per hour (gross variant)
FFS BETA
up to 800 bags per hour
FFS GAMMA
up to 1,200 bags per hour
FFS DELTA
up to 1,800 bags per hour
|
|
FFS-Filling machines manufacture the sacks from PE-tubular film, fill them and seal them hermetically tight.
Main advantages:
- Sack length according to pack size infinitely adjustable (minimal residual empty space)
- Tubular film in roll form, no additional sack magazine
- Simple machine loading, modest space requirement
|
|
Horizontal form seal machine is suitably designed for wrapping products of pillow type, and commonest type of commercial package.
FW3710BS/B
- Stainless steel construction hygienic easy cleaning model.
- Box motion end sealer model for hermetic seal package.
- Touch panel operation instructions by words and illustrations.
- Bottom film feed for easy and positive transfer products from infeed conveyor to film.
FW3410BS/B
- Stainless steel covered hygienic easy cleaning model.
- Box motion end sealer model for hermetic seal package.
- Touch panel operation instructions by words and illustrations.
- Bottom film feed for easy and positive transfer products from infeed conveyor to film.
|
|
Horizontal form seal machine is suitably designed for wrapping products of pillow type, and commonest type of commercial package.
FW3710BS/B
- Stainless steel construction hygienic easy cleaning model.
- Box motion end sealer model for hermetic seal package.
- Touch panel operation instructions by words and illustrations.
- Bottom film feed for easy and positive transfer products from infeed conveyor to film.
FW3410BS/B
- Stainless steel covered hygienic easy cleaning model.
- Box motion end sealer model for hermetic seal package.
- Touch panel operation instructions by words and illustrations.
- Bottom film feed for easy and positive transfer products from infeed conveyor to film.
|
|
Horizontal intermittent operation
Versatile and economical pouch packing for powders, granules, liquids or pastes!
The HVS horizontal packaging machines offers a variety of pack styles.
From 3-side sealed sachets up to Doy-pack stand-up bags with re-close zip, nearly all types of portion packages are possible.
|
|
|
You would like to make, fill and seal your pouches on a single machine, the high THIMONNIER's experience on manufacturing of Doypack® machines will bring you the best service
|
|
Volpak’s simplest and more field proven model. Simple for its easy handling and low maintenance mechanisms.
The S-90 can equip different type of fillers; Volumetric filler for granules, auger filler for powders, pneumatic pistons for liquids, etc. It can even mount two different fillers at the same time.
|
|
Linear moulding, filling and sealing machines Type HDG-LFM
suited for cost-effective production and filling of 3 and 4-side sealed pouches. The most diverse types of powders, granulates, small-sized products, fluids, creams and tissues can be packaged. Our linear packaging machines can produce, fill and seal pouches in the sizes
50mm x 50mm (WxH) to 140mm x 200mm (WxH). They can run using one row and reach an output of up to 90 pouches per minute.
|
|
|
|
|
|
RB Rotary FFS
Pre-made pouch look, seal, and quality with the low cost and convenience of a form fill and seal machine.
The RB series offers you the best of both worlds. The pouch is formed in a linear method from roll stock. After sealing the bottom (or top depending on loading) and sides, the pouch is cut, and placed onto a rotary turret, just like a pre-made pouch. The RB machine can also be set up to use pre-made pouches, then converted over to roll stock at a later date! Horizontal forming, filling and sealing machines with rotary Type HDG-RB especially designed for the production and filling of 3 and 4-side sealed pouches, double pouches, stand-up pouches, bottom-folding pouches and contoured pouches with and without re-sealable systems. Even if changes need to be made between the different types of pouches, this is the right machine. The most diverse types of products can be packaged including powders, granulates, small-sized products, fluids, creams, tissues, pieced products and much more. Our horizontal packaging machines can produce, fill and seal pouches in the sizes 35mm x 40mm (WxH) to 400mm x 400mm (WxH). They run using up to four rows and reach an output of up to 360 pouches per minute. The HDG-Memorystrip and Zipper are available for re-sealable systems. Also, HDG manufactures machinery systems for filling pouches that have pour-spouts. With them, you can either work with prefabricated pouches or manufacture them yourself inline.
|
|
The CW Modular Series of shrink wrappers takes on a whole new look for the next generation! We have compiled all the comments, criticism and suggestions from customers, distributors and technicians in developing this new series of shrink wrappers.
Ergonomically designed, the CW-160 Modular horizontal form, fill and seal series of wrappers deliver maximum performance with speed, efficiency and dependability. Its continuous motion and rotary hot knife sealing system ensure speed. Its handwheel adjustable controls, ease of operation and electronic eye sensors provide efficiency. Its simple, mechanical design and heavy duty steel construction guarantee dependibility. The CW-160 Modular offers standard or custom infeeds. Fixed or adjustable height forming plows to meet your exact needs. The CW-160 Modular is fast, efficient and reliable -- delivering maximum performance.
|
|
Aromapack RS20 is a reel-fed modular packaging machine, which comprises a horizontal bag forming unit and a rotating filling and closing unit. It makes perfectly squared high quality bags at an operational speed of 50-55 ppm.
Starting from a film reel, it makes perfectly stable paket shape or gable top bags, with the option of marking the edges for enhancing the bag’s presentation.
|
|
Adjustable Pouch King®
First of its kind pouch size flexibility with high-speed, state-of-the-art sealing technology.
Flexible packaging advances to a whole new level with this machine. Virtually any pouch size within the adjustment range can be produced, using few or no change parts. This ease of reconfiguration will allow customers to achieve the benefits of high speed pouching, while maximizing production flexibility.
Features and Benefits
- High speed up to 500 pouches per minute
- Quick, repeatable pouch size changes
- High reliability for 24/7 operation
- Separate modules for filling and sealing
- Fully servo-driven
- Touch-screen HMI
- Stainless steel frame
|
|
|
|
Bagging machines: FFS machines, Vertical baggers, Flow wrappers...
