|
|
Macofar Sterilizing Tunnel T 600
The Sterilizing Tunnel series is available in 4 different sizes. The sterilization is based on the laminar flow principle. Depending on your needs, different combinations of the infeed, sterilizing and cooling area are possible.
The integrity of the seal on the absolute filters is assured by ceramic fiber gaskets. The area around the frame is connected to the aspiration area of the respective fans, thus creating a depression zone between the up and down stream sterile areas. That avoids and accidental infiltration of non sterile air through the gaskets.
The reference temperature for the depyrogenization has been established by International Pharmacopoeia at 250 ° C.
|
|
Automatic filling and wrapping machine for foiling butter, margarine, melted meat, cottage cheese, fresh cheese, ice-creams, edible fats, lard etc into aluminum foil laminates or parchment paper.
Size of packages:
500g- 135x80x50 mm
200(250)g- 100x75x29(37)mm
100(125)g- 75x50x29(37)mm
Custom weight and size optional (dosing range 50g till 500g)
*maximum output capacity- 80 bricks/min
*machine size- 2900x2490x1750 mm
*machine weight- 1425 kg
|
|
TA-1, TA-1-DUO
Carton erecting and glueing machine
Powerful machine for erection and glue-closing of folding boxes at high speeds of up to 60/120 boxes per minute. The machine is used in all industry types for stand alone or for in line operation for erection of flat carton blanks to form folding and hollow frame boxes or trays. Due to high reliability very suitable for integration in packaging lines.
|
|
|
Above 30 cases per minute, packagers need a machine with more muscle, yet may find it difficult to justify the cost of added performance for top-end machines. A-B-C's Model 330HS case erector fills this void in the mid-speed (30-40 cpm) packaging range. This powerful erector/sealer is an affordable machine that incorporates solid production features of A-B-C's high-speed models, ensuring top performance from the packaging line.
|
|
Bosch's Doboy line of carton formers and tray formers accommodate a wide range of blank formats and material types. You can choose from adhesive, simplex locks or pic-lock options for corrugated, solid, layered, and coated materials. Formers are available in single or dual head models to meet nearly any production requirement. Doboy carton formers are a great addition to any of our delta robotic top loaders!
The Doboy Cobra carton former provides state of the art case forming and carton forming technology and performance. A key feature of the Doboy Cobra is its unique blank transport mechanism. It provides positive blank control from magazine picking through hot melt application to forming head placement. The Doboy Cobra carton former offers glue or locking style tray options on one carton sealing machine.
|
|
|
ECT machines are hot-melt, adhesive-style top-load carton and tray-forming machines. The ECT delivers exceptional efficiencies, with an innovative indexing turret concept for remarkable carton control and some of the highest forming speeds available. The ECT is capable of handling an impressive array of carton tray designs, formed from a single flat blank and ranging from a typical four-corner style to complex hexagonal, octagonal and other unusual multi-sided packages. Application of adhesives can be accomplished through the use of either an enclosed, pressurized nozzle-type (jetting) applicator system or an open-pot 'dauber.'
|
|
The ABOT uses a vision system to measure a box moving down a built-in conveyor. It then tailors the way the box is cut to a pre-programmed pattern. Perfect for use in the engineering and logistics industries, ABOT is capable of dealing with up to twelve hundred cases per hour.
ABOT can accept material to be opened in any combination or order without the need to run the same size boxes, batches or groups together. The ABOT finds applications in re-packaging operations, returns processing, stocking, distribution and replenishing picking shelves in order fulfilment operations.
|
|
Box Opener Applications :
- Returns Processing
- Automatic Carton opening for Co-Pack operations
- Automatic Pick Module Replenishment
Stop box knife injures now! CASI now offers a fully automatic box opener-- ABOT™-ONE (ABOT™ automatic box opening technology) is a fully programmable carton opening system capable of removing the top from cartons automatically at rates up to 600 cartons per hour. Add more power with ABOT™-DUO, which opens up to 1000 cartons per hour. Speed will greatly depend on the size of box, cut depth, and other variables which alter cut times.
The flexible design allows for automatic height & carton ID detection, enabling ABOT™-ONE to adjust opening methodology by carton height or optional barcode or RF Tag scan.
State of the art sensors combined with CASI's state of the art software provide a most flexible and dynamic solution at an industry leading ABOT™ price. The ABOT™ system has the ability to modify its cut pattern selection on the fly.
|
|
SKINETTA case packaging products include pneumatic and servo-mechanically driven machines:
- Sideloader
- Toploader
- Wrap-Around Packer
- Tray Packer
- Tray erectors with and without tray loading
|
|
# ALTERNATE OR CONTINUOUS DUTY
# USING PRE-GLUED
# BOXES OR FLAT BLANKS BOX CLOSURE BY GLUE OR JOINTS
|
|
High-Speed Case StackerHigh Speed Case Stacker from Westfalia Deam
Stacking speeds up to 30 cases per minute
* Variable stack heights
* Air powered with integral air reservoir
* Air values mounted in stainless steel enclosure
* Installs easily over existing case conveyors
* Options:
o Available in 16 and 24 quart versions
o Comes in left or right hand versions
|
|
- For empty or full small boats.
- Stacking multi layers
- Multi formats
OTHER SERVICES
- Elevator, chute to mount or descend one or more small boats on a different level.
|
|
Single station High Frequency ZDPS welder 3-10kW. You may weld PVC and PET-G materials with this machine. Because of small size it is very easy to move it from one place to the other and it doesn't take much space on your production hall.
This model has preheated welding platen which helps to get high quality welds. Machine is fully shielded which protects operator from harming radiation effects.
Main features:
+ Ergonomic working space
+ Easy in use
+ Possibility of saving 30 welding programs in PC
+ Modern Mitsubishi steering controls
+ Fully shielded and CE certified
Perfect tool for production in:
+ packaging industry
+ advertisement industry
+ medical equipment
+ cloth industry
+ office accessories
|
|
EASY FORM
EASYFORM is an in-line thermofor-ming machine with a compactdesign, completely made of AISI304 stainless steel and anodizedaluminium with IP 65 protection class. It is suitable for small andmedium productions.
This model, thanks to high versa-tility, can be applied in food, indu-strial and medical field.
The machine can work with bothflexible and rigid material
It is available in two versions:EASYFORM N for sealing only and EASYFORM VG for vacuum packaging and vacuum/gas packaging.
The machine can be easily washed; it is ideal to work in aggressive and damp environ-ments
The changeover is quick and easy, The supplied brushless motorgrants high precision and speed This machine can be customized with several options such as prin-ted top web, coding units,dosing systems, slicers, in lineflexographic printer, as well as obtain the “Europe hole“ in blister packaging.
|
|
Easy-open Zipper system
A small piece of paper with a big effect.
The Zipper is applied on the adhesive side of the tape during case sealing. It keeps a triangular area free of glue and is easy to lift with one finger.
No need for scissors, knives or the like, and therefore no risk of damaging the contents.
The Zipper system can used for most SOCO SYSTEM case sealers.
|
|
The MSK shrink frame technique ensures targeted and metered generation of heat without flames. The optimum shrinking temperature ensures gentle warming of the film which retains its tensile force and fatigue strength. The heating systems developed by MSK are matched to the varying requirements of different industries.
|
|
TM100 trailing edge seal overwrapper
-Wide range of pack capabilities
-Low capital outlay
-High speed up to 300 wraps per minutes
-Customised specifications
-Low maintenance
-Fast and simple size changeover
-Base seal or trailing edge seal
-Mechanical or servo operation
-Collating and multipacking
-Transparent or printed film
-Tear tape or perforation opening
-Heat, cold glue or hot melt sealing
Marden Edwards offers a complete portfolio of Overwrapping machines, otherwise known as cellophane wrapping machines. Ranging from low cost entry level machines to high speed integrated systems Marden Edwards has the Overwrapping solution suited to your need. Whether you are looking to overwrap to save production costs or to enhance your product's appeal, all Marden Edwards overwrappers produce the same high quality of wrap and have size change versatility built in. All Marden Edwards machines are straightforward to maintain and are very low cost to run.
|
|
Large-format sleeve wrapper with shrink tunnel
SUPER WRAP 1300 de Luxe In-Line
Furniture and shelf components, construction and insulating materials, multi-package bundles, and much more.
The large format sleevewrapper Super Wrap 1300 de Luxe In-Line and the shrink tunnel Universal 1300 NT with HV technology: this combination makes total closure transportation packaging possible, and does away with the need for additional fusion or sealing tools.
The innovative HV technology of the shrink tunnel is responsible for controlled overlapping and adhesion of the excess side film, without touching the product.
|
|
LHW-1
Automatic high speed fold wrapping machine for chewing gum chiclets
The excellent fold wrapping machine for wrapping chewing gum pellets in sticks in a sealed full wrap. The machine is used for high speeds of up to 400 packages per minute.
|
|
LRM-S
Automatic fold wrapping machine for chocolate bars and tablets
The excellent compact fold wrapping machine for a performance range of up to 550 wraps per minute. The machine is mainly used in the confectionery industry and wraps enrobed and formed chocolate bars and tablets, small tablets or napolitains, wafers and other similar products in one or two wrappings. Preferably in combination with LoeschPack LTM-K-SA for multipacks.
|
|
LTM, LTM/gr
Automatic one station fold wrapping machine for chocolate tablets and bars
The flexible fold wrapping machine for higher speeds of up to 180 packages per minute. The proven LTM series is used for wrapping of chocolate tablets, bars and small bars and other confectionery products of rectangular shape.
|
|
LRM-G
Automatic fold wrapping machine for chocolate bars and tablets
The excellent compact fold wrapping machine for a performance range of up to 350 wraps per minute. The machine is mainly used in the confectionery industry and wraps enrobed and formed chocolate bars and tablets, small tablets or napolitains, wafers and other similar products in one wrap.
|
|
A wide range of machines made of stainless steel AISI 304 according to CE normatives and are equipped with a volumetric electronic sensor to constantly control vacuum and gas packaging. Vacuum cycle can be excluded and, thanks to the 'soft-air' device, it is possible to control air immission in the chamber. A digital, low supplied control panel is equipped with 5 programs to memorize. High density polyethilene plates to reduce chamber volume are supplied with the machine. Upon request, machines can be assembled with a tilting device for liquid products. Gas injection system (optional).
|
|
Sugarpack
RS20 Special, automatic packaging machine starting from paper or paper-based pre-made bags.
It fills and closes paket shape bags: 45-55 ppm for 1 kg. of sugar or similar products. Easy size changeover.
Very economic and efficient line, ideal for making high quality bags at a very good quality/price relation.
|
|
FALCON is a horizontal flow-wrap type packaging machine which produces packs sealed on three sides from a roll of heat-sealable film.
Perfect for rapid and frequent set-up changes without compromising high-speed packaging (max 200 mechanical cycles per minute).
Packages products in the foodstuffs sector, the cosmetics sector, the pharmaceutical sector and the stationery sector.
Cantilever construction. Packaging speed: up to 200 packs/min (300 packs/min for the special version).
|
|
|
|
|
|
HiVac90
HiVac90 is a high speed line for under vacuum packaging belonging to the family of vertical mandrel automatic machines. It makes paket shape or gable top bags with a high degree of vacuum or in modified atmosphere with gas flushing, in order to guarantee always the best preservation of the product from oxygen, light and moisture. A wide variety of possibilities for the bag top treatment are available: simple or double fold, half moon profile for easy opening, reclosing adhesive tape or labels and tin-tie. Upon request the machine may fit the Aroma System one-way degassing valve. This compact packaging line, which integrates perfectly sturdy mechanics with the most advanced electronic developments, reaches normally an operational speed of 80 ppm.
All ICA packaging lines may be equipped with: integrated check-weigher, Siemens PLC control system with touch screen display or PC, supervision system, electrical axes management with servo-driven motors, on-line diagnostics via modem connection, coding and dating devices, labelling units and clip-closing devices, bundlers, palletizers and auger fillers, cup-type volumetric fillers or weighing systems with single or associative heads. The coffee packaging lines may be prepared for fitting Aroma System degassing valves and for packaging in modified atmosphere with gas flushing.
|
|
|
Full servo horizontal pillow pack wrapper to obtain pillow pack style packs from a flat reel of heat/cold sealable wrapping material. Cantilevered contruction. PEARL is manufactured without mechanical drives: drive motors are connected directly to the various assemblies. The electrical panel is housed inside the machine frame and protected from external environment. PEARL reaches up to 120 cycles/min, capable of wrapping diferrent products in food and non food sectors.
|
|
|
Horizontal flow wrap, entry level machine with rotary crimp jaws, designed to wrap at speeds of up to 100 bags per minute. An extremely versatile, compact and reliable machine, the Swift will accomodate a wide range of food and non-food products.
|
|
|
GHIBLI is a high-speed packaging for large products and irregular shapes. GHIBLI: horizontal flow-wrap type packaging machine for producing packs sealed on three sides from a roll of heat-sealable packaging film. Ghibli is an LVA, Servo, Long Dwell (cantilevered box-motion) machine
|
|
|
|
Miscellaneous packing machines
