|
|
Nozzle for injection presses
Nozzle for injection presses with Shutter Nozzle for injection presses with Mixer/Filter Nozzle for injection presses with Mixer/Filter+Shutter
|
|
|
Precision-engineered and made in Switzerland, Herzog® brand machine nozzles can help you make better parts, and more of them... day in and day out. Xaloy is the sole authorized distributor of genuine Herzog® nozzles and spare parts throughout the Americas and Asia-Pacfic regions.
|
|
Description Locating sleeve OXA®
Reference 553-20-30
Material Alloyed steel, case hardened, tempered
Please select one table row below:
d2 (mm) l (mm)
20 30
20 40
20 60
20 80
20 100
|
|
Ejector Pins, Core Pins H-13 Nitrided and 50-55Rc
with 3-5 Day Shipping.
Also available in Moldmax and Stainless Steel H-13
thru-hard and Mold Star cut to length.
|
|
Description Self lubricated wear plate, thickness 10
Reference 1303-20-100
Material Special bronze ; Oiless graphite inserts
|
|
Die Head
The specially designed DKM basket die head and spiral die head for the DKM series single screw extruder, fits well with the DKM high speed vacuum calibrator and guarantees the high output with excellent article quality. The max producible pipe diameter isΦ1600mm.
* Regardless of material viscosity variation, widely applicable for HDPE/MDPE, PERT, PP/PP-R, PB, PS/ABS and HMW-PE pipe production, with reliable processing property.
* High output but rather low pressure drop and melt temperature.
* Small pipe stress due to the low melting pressure and temperature.
* Capacious and smooth runner reduces the pipe stress to the minimum.
* High quality ceramic heater with longer service life.
* Pipe with scratch-free smooth surface finishing.
|
|
Polyolefin pipe die-heads for pipe diameters ranging between 10 - 2 000 mm are part of the delivery package. Reifenhäuser was the world's first supplier of die-heads for 2 000 mm pipes, thereby significantly increasing the extrudable pipe diameter of the time a milestone that perfectly illustrates Reifenhäuser's key expertise.
Reifenhäuser uses spiral mandrel die heads for the extrusion of PE pipes. Coextrusion adapters for the extrusion- of 2 and 3 layered pipes are also supplied.
|
|
|
|
|
|
As the most influential brandname on extrusion die, owning 60% market share in China, we have been always dedicated to carrer on development of extrusion dies and correlative products
Characteristics
- Originated design for mono-block die body, UV layer distributed evenly.
- Avoid leakage happening because of split die body.
- Easy maintainance.
- Male inside have air distributary system, divide the cavity into several zones, control air volume independently, ensure even air distribution in a short time.
- Flexible and fine adjustment on both upper and lower lips, the tolerance of the wall thickness within ±3％.
- Internal heating bars work independently in separated zones, temperature tolerance within ±1℃.
- With the economic UV function，PC+UV co-extrusion feedblock and a special structured male, make UV layer evenly cover on the product surface.
- PC hollow profile die can be used for 4-25mm thick , 2100mm wide product, the multilayer product thickness can reach 80mm.
- PPhollow profile thickness and width range bewteen 2-12mm and 1200-3000mm.
- Flow channel surface polishing precision at 0.01-0.02μm.
- Male tooling precision can reach 0.04-0.05μm，special non-sticking treatment applies to each rib.
|
|
COMAT catalogue is composed by items designed for mould making, mould's maintenance and plastics transformation.
With a wide distribution network and several warehouses in Italy, COMAT can meet any need on time.
For any need of moulding, COMAT can give you the solutions for hot runner systems, for maintenance and components supply: from standard to pre-engineered components, from safety products to hot runner systems, from polishing products to temperature controllers.
Some of our product lines are listed below:
Recycling inserts, round mold inserts and datestamps
|
|
The steady origin of new materials and resins leads us to the continuous research of more and more evolved technologies; the nozzles produced by Asso s.r.l., thanks to larger and larger investments, go from the simple small-dimension casting point to hand-manufactured articles in bimaterial, or to the pneumatic locking.
Nozzles are designed with cad-cam evolved systems, realized by numeric check machines and tested in metrologic rooms furnished with tridimensional machines always under numeric check.
|
|
Straight through nozzle, open
- Sprue-Line, Type 01.230.
- straight through nozzle
Straight through nozzle with torpedo inside
- Sprue-Line, Type 01.240.
- Straight through nozzle
|
|
Description Heated sprue nozzle 300
Reference 6985-205-040
Please select one table row below:
A (mm) P (230 V) (W)
50 400
63 500
80 650
100 800
|
|
Description Sprue puller insert
Reference 645-12-25
Please select one table row below:
D2 (mm) L2 (mm)
12 25
12 32
12 40
16 25
16 32
16 40
20 32
20 40
20 50
20 63
25 32
25 40
|
|
Description RINOX-LUB ejector pin anti-friction
Reference 1634-1-100
Material Special stainless steel 17% Cr anti-friction
D (mm) L (mm)
1 100
1.5 100
1.5 125
1.5 160
|
|
COMAT catalogue is composed by items designed for mould making, mould's maintenance and plastics transformation.
With a wide distribution network and several warehouses in Italy, COMAT can meet any need on time.
For any need of moulding, COMAT can give you the solutions for hot runner systems, for maintenance and components supply: from standard to pre-engineered components, from safety products to hot runner systems, from polishing products to temperature controllers.
Some of our product lines are listed below:
Special and standard mold components
|
|
Grind stock is provided on the FEMALE interlock surface. To
register the interlock on the tapered surfaces, stock must be
ground from the front face of the female until there is a slight
clearnace between the faces of the male and female when
assembled. PRECISION FITTING of interlocks requires grinding
the necessary amount of stock from the female face to
obtain contact on tapered surfaces AND male and female faces
simultaneously.
|
|
Description Centering plug
Reference 611-12
Material Alloyed steel, case hardened, tempered
Please select one table row below:
D (mm)
12
16
20
25
32
40
50
|
|
Wear Plates Standard, Metric & Self Lubricating
- Ground top & bottom
- Machined edges
- Cut to length
- Priced per inch
|
|
Description Wear plate (brass with inserts) - Reference mark 20 to 24 (ref. 5184)
Reference 5184-000-020
Material Special brass Cu Zn 23 Al 4 Mn Fe or Cu Al 10 Fe 5 Ni 5
|
|
Description Self lubricated wear rails
Reference 1300-20-100
Material Special bronze ; Oiless graphite inserts
Please select one table row below
h (mm) l (mm)
20 100
20 160
32 100
32 160
50 160
|
|
| ... products without technical information |
| |
|
|
Extrusion dies, Injection molds, Mold ejector pins...
