|
|
Description RINOX-LUB ejector pin anti-friction
Reference 1634-1-100
Material Special stainless steel 17% Cr anti-friction
D (mm) L (mm)
1 100
1.5 100
1.5 125
1.5 160
|
|
Description Ball cage
Reference 5741-12-20
Note
Please select one table row below:
D1 (mm) A (mm) Observation
12 20 .6
12 23.6
12 38.6
12 44.6
12 53.6
|
|
|
Reifenhäuser has a tradition of making die-heads that goes back for over 50 years. A team experienced in planning and construction, the use of cutting edge software tools, highly efficient production, and close contacts to raw material suppliers are all factors that guarantee the best possible results.
|
|
|
|
|
|
HOT RUNNER SYSTEM
HOT HALVES: ONE PLATE/DOUBLE PLATE
HOT HALVES DOUBLE PLATES
* The hot half is supplied with the manifold and necessary plates for the manufacture of the injection half of the tool
* No need for the Customer to machine clearances for the hot runner system
* Both the electrical and pneumatic wiring are provided according to the customers' specifications
* Proper warer circuits are provided inside the Hot Half
* Once received, the Customer only needs to assemble it into the rest of the mold
* Easier maintenance
HOT HALVES SINGLE PLATE
This type of Hot Half is carried out with the use of a single plate where the hot runner system is housed. This format can only be used with screwed-in systems given that these types of nozzle do not need to be centered in the underlying plate. One plate can be therefore eliminated and, as a consequence, the entire hot runner system is centered and fixed in the remaining plate (in the opposite way to 'standard' systems).
This allows
* A reduction in system thickness and weight
* A reduction in system costs
* Easier assembling and maintenance
* and not necessarily at the same time
|
|
A complete mould half with the hotrunner system already integrated has several advantages: The hotrunner is not only fully assembled and wired, it also has been thermally and electrically tested. Thus the integration of the system is much more efficient. Mistakes during assembly are avoided, on-site adjustments are practically not necessary.
EWIKON hot halves help to speed up mould projects significantly. All EWIKON hotrunner systems can be delivered as hot halves.
|
|
CPI QUICK COUPLINGS FOR MOULD TEMPERATURE CONTROL
Straight-through standard profile CPI quick couplings
- Fast, automatic and reliable. Connect and disconnect with just one hand.
- 2 diameters (8 mm & 12 mm, full flow) offer maximum flow rates in a small body.
- Traight-through design eliminates all risk of scale buildup.
Applications :
- Mould temperature control on thermoplastic injection-moulding machines and zamak or aluminium die casting equipment.
- Cold water, refrigerated water or hot water circuits.
|
|
- Quick and easy installation (even on existing molds).
- Return of the ejector plate is assured.
- Part ejector plate is assured.
- Coupling is obtained in any position, disconnecting is after the ejector plate is fully returned.
- Fast acting up to 30 strokes/minute.
- No wearing parts.
- Can be used on all injection machines equipped with hydraulic or mechanical ejection.
- Set-up time can be greatly reduced.
- Reduce noise on machines with mechanical knockouts.
- Especially suited for injection machines that do not have easy access to the ejector plate.
- Allows for center ejection to be tied in.
|
|
COMAT catalogue is composed by items designed for mould making, mould's maintenance and plastics transformation.
With a wide distribution network and several warehouses in Italy, COMAT can meet any need on time.
For any need of moulding, COMAT can give you the solutions for hot runner systems, for maintenance and components supply: from standard to pre-engineered components, from safety products to hot runner systems, from polishing products to temperature controllers
|
|
Double Date Stamp
• Allows two different indications on the plastic
part without the need for 2 date stamps, reducing
costs and space required
• The same height is always maintained between
all rings
|
|
Nozzles
The wideness of range of EMP nozzles comes from 28 years of active presence in the field of Hot Runner moulding.
More than 20 typologies of nozzles (Models), divided into more than 100 dimensional cathegories (series), available in the different standard lengths as well as in special executions, in function of the specific application needs, allow:
• freedom in planning, with a broad choice of methods of injection
• reliable performances
• uniformity and precision in temperature control
• as well as the processing of all main thermoplastics and elastomers
|
|
Xaloy meets needs for precise on-off control of the injection molding melt stream with System Eng® needle shut-off nozzles.
* Controlled, process-dependent shut-off
* Shorter cycles than open-nozzle systems
* Minimal pressure loss
* No drool
* Optimal heat transfer
* No melt shear
Two types are available: the power-operated L series (at left in the photo above) and the spring-operated S-series (at right).
|
|
|
|
|
|
The progenitor range of the D nozzles has been completely renovated to meet the continual demands of the customers, who need more flexibilityand easier application in mould hot runner systems.
The nozzle tip assembly, which was integrated into the old nozzle body, is now screwed into the core.
Besides facilitating maintenance operationson the open moulding machine, there is also an economic saving on spare parts.
The first types of D nozzles available with the screwed tip are types1, 1B and 3B.
All the tip types are constructed with a special sintered steel, which has an optimal thermal conduction, and makes them much more resistant and not subject to wear, therefore they are suitable for the injection of all types of thermoplastic materials.
Also, the diameter of the channel inside the nozzle core has been increased, to improve the flow rate and for easier injection of large size parts. For easier application in moulds with many cavities it has been decided to increase the thickness of the D nozzle heads, to have more space for the outlet cables and as a consequence be able to increase the number of hot half injection points obtainable with D nozzles.
|
|
|
The externally heated EWIKON HPS III system offers an advanced naturally balanced, manifold technology with streamlined flow channels which can be combined with a wide range of externally heated high performance nozzles. A diversity of gating options makes the system suitable for for almost all kinds of applications.
|
|
Features:
· melt channel
· compression.
· uniform solids/melt transition
· efficient melting
· consistent pumping.
|
|
|
|
|
|
As the most influential brandname on extrusion die, owning 60% market share in China, we have been always dedicated to carrer on development of extrusion dies and correlative products
Features
Special flow channel design, sutiable for different raw materials, JCtimes has developed series of dies for PE PP PVC EVA foam products.
Independent temperature control system in lips ensures very identical temperature on the whole width, in order to get most proper expansion rates for different raw materials.
Equipped with the feedblock can produce the co-extrusion foamed products, in whiich surface layers are compact and the internal layer is foamed
Width adjustment system
According customer’s requirement to design various width adjustment system, include: external deckling system and inernal deckling system.
Features
Internal deckling system have reducing thick edge function, mainly use for coating extrusion line. Due to the special adjust requirement, the flow channel of the die also have special design.
Screw type external deckling can adjust the width on line and it working can save time, labour, and raw materials,
|
|
- Ampco #18
- Superior wear characteristics
- More durable than plated bushings - NO plating to wear through
- Counterbore for rib in pin retainer plate
|
|
Nozzles DTV
Free-flow nozzle for manifold uses. It can change version in short times to adeguate itself to the most various requirements for small, medium and large capacities.
On request, it is furnishable with fusion heater.
|
|
HOT RUNNER SYSTEM
FACE TO FACE NOZZLE
• New improved materials for tips, endrings and body
• New titanium ring
• New optimized heater layout
• Improved thermal uniformity
• New geometry for tip and end bushing
• Easy maintenance thanks to the new screwed connection between duct and body
|
|
The Femto-LiteTM is an 11 mm wide hot runner nozzle ideal for small closures, flip-top caps, personal care and multi-material / multi-colour products.
Engineered for applications requiring inside gating and tight pitch designs, its 19 mm pitch and a flange to tip heat profile make it suitable for a wide variety of thermoplastic resins.
Features at a glance:
Standard lengths from 73 to 163 mm, with a 3.5 mm runner diameter and 12 mm well bore makes it suitable for close gate-to-gate spacing.
Available in five gating options for both tip and sprue gates.
|
|
Unique Patent Pending Nozzle Design
Conductive Wear Resistant Tip
- Conducts like BeCu
- Longer lasting durable material
Lower Processing Temperatures
- Higher quality parts
- Energy savings
- Longer nozzle life
Minimizes material degradation
- Commodity grade resins
- Engineered grade resins
|
|
nozzle Reference A (mm) P (230V) (W) Order
300 6936 50 400 6936-205-040
300 6936 63 500 6936-206-350
300 6936 80 650 6936-208-065
300 6936 100 800 6936-210-080
300 6988 0 0 6988-020-000
|
|
|
The large spectrum of accessories in the Z-program completes the idea of the HASCO building block principle. It offers meaningful and functional additions for all applications. The Z-program is divided into eight ranges. From the guide pin to the electronic controller the user finds everything that is needed for the building of modern forms and tools.
|
|
Hot Runner Nozzles for Plastic Injection Moulding
TZM hot runner nozzle Plastic injection moulding makes high standards in heat conductivity, corrosion resistance, strength and hardness on the materials used. TZM and DENSIMET D2M nozzles from PLANSEE meet all this requirements and have a multiple lifetime compared to standard materials such as CuBe and hot working steels.
Advantages:
* TZM is superior to the standard materials by its high heat conductivity and corrosion resistance
* SHN surface hardening increases life-time according to customers by 3 - 8 times!
* Dimensions of the nozzle are not changed, surface hardness increases from 230 to 2000 HV (acc. Vickers)
Forms of delivery:
* Hot runner nozzles according to customers drawings
* TZM rods stress relieved
* DENSIMET D2M rods from stock
|
|
The High Performance System HPS II combines the advantages of an internally heated heated hotrunner system with the possibility to use existing 230 V standard controllers. From the economical point of view in many cases HPS II offers best possible solutions especially for materials easy to process. The system 2420 is the core product of the HPS II system. It enables the construction of compact multi cavity moulds with close cavity spacing and a reduced number of control zones.
Close cavity spacing
Compact mould design
Reduced number of control zones
Shorter cycle times
230 V standard controllers
|
|
We produce moulds for all machine sizes and machine brands - for new or already existing DESMA injection moulding machines also gladly within the scope of a turnkey package.
* efficient mould shop for mould sizes up to 1,200 x 2,000 mm
* a wide range of machinery incl. deep-hole boring
* construction and development
* test moulds for process development
* cold runner blocks in closed design
* FLOWCONTROL cold runner systems
* DESFLEX systems to minimize waste
* testing and optimization
* spares / after-sales service
* All production know-how from one source
* Innovative injection moulds for demanding articles
* Complete documentation for quick spare parts delivery
|
|
MOLDS
MULTICOLOR AND MULTICOMPONENT
Over the years, INglass-HRSFlow has specialized in the production of injection molds for the Automotive lighting. INglass produces the following types of mold:
• Multicolor:
The main feature of such molds is the simultaneous injection of more than one color. Both injections take place simultaneously, thereby allowing a specific finished part to be completed in a single cycle.
• Multicomponent:
This type of mold uses the same procedure as multicolor molds. Consequently, several chemically-compatible materials can be injected simultaneously PC, PMM, PC-ABS.
|
|
State of the art CNC Machines and tooling
Wired EDM Pockets with sharp corners, small radius and tapered walls
Special Milling, insert pockets, lock pockets, knock out holes, waterlines, etc.
Deep hole drilling up to 20” deep per side
Tight tolerances held
Machined complete to customer CAD files
|
|
Please select one table row below:
Format of the mould
Slectionnez une ligne du tableau ci-dessous :
Format du moule :
156x156
156x196
156x246
156x296
196x196
190x246
196x296
196x346
196x396
218x246
218x296
|
|
Molds
BEST QUALITY AND FAST DELIVERY
SIPA is among the world largest PET mould producers.
Four manufacturing centers equipped with state-of-the-art tooling equipment support our Customers around the globe.
Whether you need just a mould base, a large set of blow shells or a multitude of large-cavitation preform mould, our toolshops are ready to support you.
More than 15,000 blow moulds and 20,000 injection stacks are manuafctured every year using the best material available in the market and delivered in more than 120 countries in the world.
|
|
|
|
Extrusion dies, Injection molds, Mold ejector pins...
