|
|
- The 'TORNADO' Auto Return
- Effortless, fast and accurate cutting & clamping of cloth
USED BY
- Garment makers
- Bedding and curtain manufacturers and so many other industries EVERY WHERE!
BENEFITS
- Saves cloth every time you make a cut!
- Increased efficiency - saves time !
- Fitted in minutes - No drilling or table alterations necessary !
Main Features
- Single touch Push button operation.
- 'Fishing rod' power feed to cutter - simple and effective.
- Lift handle (adjustable for operator comfort) . raises track evenly.
- Pair of adjustable table clamps on operators side only. Makes setting length of lay easier.
- Return-ended stabiliser allows fullest use of table width.
- Cutter has 'square' main blade and self-sharpening action. Machine complete with Grinder.
- Counter helps to keep a check on the number of lengths laid.
|
|
|
|
|
|
INSPECTION MACHINE
FOR FABRICS DIRECTLY FROM THE RAMEUSE
Mod. ISN 220 NO STOP
The inspection, winding machine,
ISN NO STOP, allows a check of the fabric quality;this machine can be interfaced with the exit of Rameuse, or other machine kind calendar, without stop it. Tanks at the linear geometry of the drawing, to the sensitive system of synchronization and the motorization of all the rolls of delay fabric, the machine is excellently for the verification of elastic fabrics to sweater and shuttle.
Besides, thanks to the management from PLC interfaced to inverter, the operator can modify in real time tension fabric and hardness roll.
Technical characteristics:
• Inlet fabric from J-BOX with synchronization
• Inclined inspection table with rear light
• Up light
• Auto-centring winding unit
• Winding of the roll
• Adjustable compactness of the rolls
• Adjustable fabric tension
• ø500 mm diameter knitted fabric rolls
• 3÷60 m/min. speed control without step.
Optional:
• Digital weight measuring system
• Automatic linear cut
• Wood or special light
• Comatex software for store all the faults
• Barcode labelling for more type of error
• Mark-fault one or more fault
• Doubling system in 2 or 4
• Packing system
|
|
|
Mikrosam specialises in designing and producing vertical impregnating machines with high performance that meets market need for the quality prepreg. Our newest Li3000 series impregnating plants is equipped with high-end technology that ensures the quality and constant characteristics of the product.
|
|
Strip cutting machine to cut and rewind every kind or matérials.
* Two models with different cutting technology according to the material
* Ever HSS blade + counter blade, or 2 auto sharpening tools in contact
* Adjustable running speed
|
|
|
|
|
|
TENSIONLESS INSPECTION MACHINE
FOR ELASTOMER FABRICS WITH RELAX BELT
Mod. ISR 220
The inspection, winding tensionless machine
ISR 07’ TENSIONLESS,
provided of axial or tangential unwinding for big rolls, it’, an excellent machine for the elastomer fabrics.
The fabric gently comes situated, in the form of small folding, on a conveyor belt, that allows it to relax and particularly as it regards the elastic materials to resume its own elasticity. An additional conveyor belt incline ® (Exclusive Patent COMATEX) accompanies the fabric, without altering its acquired stability, to the summit of the table of inspection illuminated, where possible to view and mark the defects eventually found.
Before the end phase of winding, a special software Comatex combined to the electronic sensor of tension, it allows to maintain results of relaxation and to get rolls without residual tension.
Technical characteristics:
•Inlet fabric from J-BOX with synchronization / Small rolls / Plait / Big rolls
•Relax conveyor belt
•Patent conveyor belt
•Inclined inspection table with rear light
•Up light
•Auto-centring winding unit
•Reading fabric tension with adjustment of the bad tensions
•Winding of the roll
•Adjustable compactness of the rolls
•ø500 mm diameter knitted fabric rolls
•3÷60 m/min. speed control without step.
Optional:
•Digital weight measuring system
•Automatic linear cut
•Wood or special light
•Comatex software for store all the faults
•Barcode labelling for more type of error
•Mark-fault one or more fault
•Doubling system in 2 or 4
•Packing system
|
|
MASTER MEND:-
! Unique design for comfortable & efficient mending operation.
! Top & bottom illumination for efficient mending.
! Hands free foot operated with fixed speed drive.
! Machine with any input & output of Roll/ Pile can be manufactured.
! High production efficiency with minimal operator fatigue.
! Available in various working widths.
|
|
Used by wholesalers for rewinding decorating textiles, upholstery, clothing and other technical fabrics.
* Maximum roll diameter 40 cm (other dimensions on request)
* Flexible and modular concept.
* One person operation
* Inspection table with back lighting
* Accurate length measurement system
* Winding up station with adjustable speed control
* Power supply 230V, 50/60Hz, 1 kW
*Several options are available as loop control device and special equipment for tensionless inspection.
|
|
|
|
|
|
TENSIONLESS INSPECTION MACHINE
FOR ELASTOMER FABRICS WITH RELAX BELT WITH PLATFORM
Mod. ISRP 220
The inspection, winding tensionless machine
ISR 07’ TENSIONLESS,
provided of axial or tangential unwinding for big rolls, it’, an excellent machine for the elastomer fabrics.
The fabric gently comes situated, in the form of small folding, on a conveyor belt, that allows it to relax and particularly as it regards the elastic materials to resume its own elasticity. An additional conveyor belt incline ® (Exclusive Patent COMATEX) accompanies the fabric, without altering its acquired stability, to the summit of the table of inspection illuminated, where possible to view and mark the defects eventually found.
Before the end phase of winding, a special software Comatex combined to the electronic sensor of tension, it allows to maintain results of relaxation and to get rolls without residual tension.
Technical characteristics:
•Inlet fabric from J-BOX with synchronization / Small rolls / Plait / Big rolls
•Relax conveyor belt
•Patent conveyor belt
•Inclined inspection table with rear light
•Up light
•Platform
•Auto-centring winding unit
•Reading fabric tension with adjustment of the bad tensions
•Winding of the roll
•Adjustable compactness of the rolls
•ø500 mm diameter knitted fabric rolls
•3÷60 m/min. speed control without step.
Optional:
•Digital weight measuring system
•Automatic linear cut
•Wood or special light
•Comatex software for store all the faults
•Barcode labelling for more type of error
•Mark-fault one or more fault
•Doubling system in 2 or 4
•Packing system
|
|
Laser technology is becoming very popular for the processing of woven or non-woven (synthetic) fabrics or fibrous materials for example:
- Industrial filters
- Sport and leisure clothing, protective suits
- Automobile fittings (airbags, furnishing, etc.).
The laser beam works without contact and without tool erosion. There is no distortion by a mechanical tool. The fused edges do not fray. No seaming is necessary with most synthetic textiles.
|
|
We propose a wide range of ultrasonic cutting equipments applicable at each step of the textile production process
- Ultrasonic cutting/welding devices to be installed on weaving looms
- Ultrasonic cutting/welding devices to be installed on stenters, inspecting machines or off-line machines
- Complete benches for edge or central cutting
- Cutting + punching or marking machine
- Manual cutting devices
|
|
Carpet slitting and cross cuts CC 28
- Heavy duty carpet slitting and cross cut machine.
- Neat design.
- No sharpening.
Slitting and Sealing Machines SSM 32
The Birch slitting machine can work at high speed with multiple slits, it can also be used with heat sealing knives. Other options are Trim Extraction (shown below) and Dust Extraction systems if required.
Intelligent Slitting
Birch also produce slitting machines which will follow patterns or profiles, these use cameras in conjunction with a computer to control the movement of the knives. A video is available on request of the standard slitting machine and the intelligent slitting machine.
|
|
SQUARE CUTTER
With the end cutting1850 ESCA device you can save time, fabrics, and work easily ...
MANUAL END CUTTING DEVICE :guiding rail, long handle, manual lift up
SEMI AUTOMATIC SQARE CUTTING MACHINE :guiding rail, control box, automatic stroke, manual lift up
FULLY AUTOMATIC END CUTTER :guiding rail, control box, automatic stroke, automatic pneumatic lift up
Cutting head equipped with a 110mm HSS blade
Stroke available from 1m800 till 4m00
|
|
Features:
- The machine is fabricated from M.S. Sheet metal structure and cross channels to give adequate rigidity and strength to the machine.
- The zigzag serrated blade is re-sharpen able type, which gives a long life to blade.
- Layers or piles of fabric upto 2" or 50 mm can be cut at the same time.
- The machine has special safety device wherein it can be switched on with both the hand only thus ensuring that the operator hands are safe during the cutting operation.
- The cutting table has a scale to which allows the operator to decide the size of cut conveniently and accurately.
- Two cutting boards are provided with the machine that ensures that the blade doesn't get damaged during the cutting operation.
- A wheel is provided to move the cutting board forward for the next cutting position.
- Machine is mounted on Vibration Pads to allow minimum vibrations to pass through the machine during the cutting operation.
|
|
Spreading table with end cutter and automatic lifting system. Manual version available.
Technical Data:
- Fabric width ? 1600 mm (64")
- Cutting hight ? 16 mm (5/8")
- Knife diameter 130 mm (5")
- Power consumption 200 W
- Dimensions AA-5000 (L x W x H) 3000...15000 x 1820 x 900 mm
- Dimensions AA-2000 (L x W x H) 3000...15000 x 1820 x 900 mm
|
|
CURTAINS CUTTING MACHINE
Used by wholesalers, textile companies and curtain manufacturers.
Useful width 3m500
Pull, measure and cut at programmed lenght
Rear craddle for the main roll
An inspection table top with optional back lighting screen
A digital progammable counter
A round knife cutting machine guided in a rail
Each sheet fall down into a bag in front of the machine
4 heavy wheels to move the machine
|
|
|
80BA-HD Tyre cord sewing machine, updated with new controller and heavy duty mechanism to allow the customer greater versatility to sew more layers and eliminate the need for "tabby ends" or extra strength weaving on the ends of the loom rolls. A video and leaflet are available on request.
|
|
This machine is designed to join most fabrics wet or dry with a perfectly straight seam. The join enables continuous processing to be carried out right across the joint.
The track is of steel construction with aluminium cloth rails. The carriage is positively driven in both directions. It can be made in any width. A perfectly straight seam is sewn which prevents creases from travelling up the pieces when subjected to tension. This eliminates spoilt cloth either side of the seam. The cloth is kept in open width. The machine travels across the cloth width. Less slack cloth is needed to put the ends on the machine than a stationary machine. Materials such as flimsy knitted and stiff materials, which are difficult to handle through a stationary machine, can be easily joined. Stretchy fabrics can be pulled to full width before joining to eliminate breaking out in later processing.
|
|
BAG SEWING MACHINE / TACKER MACHINE
FULL AUTOMATIC
Mod. CX 220 CR
Fully Automatic Bag sewing machine, for cotton mix lycra over 20%, mixed viscous, elastomer from looms, generally elastomer, and wool in the different typologies.
• Length stitch lenght 5÷10 adjustable mm during the job.
• Speed of job from a minimum of 6 Mt/min to a maximum of 36 Mt/min
• Check fabric tension adjustable during the processing.
• ® Double System of fabric centring open-doubled. (PATENTED)
• ® Seam Sensor System. (PATENTED)
• System of drawing to avoid harmful skids at the seam.
• Sewing carriage with Auto-Search of the fabric-selvedge
• Rear-side fabric contact with the doubling triangle
• Stretch-selvedge, Doubling triangle and Expander cylinders; entirely in glazed stainless steel
• System of read end-fabric and fabric hole with stop machine
|
|
We propose a wide range of textile, technical textile and PP cutting equipments :
- Ultrasonic cutting/welding devices to be installed on weaving looms
- Ultrasonic cutting/welding devices to be installed on PP weaving looms
- Ultrasonic cutting/welding devices to be installed on stenters, inspecting machines or off-line machines
- Complete benches for edge or central cutting
- Cutting + punching or marking machine
- Manual cutting devices
|
|
|
The ultrasonic cutting units of RINCO ULTRASONICS AG are suitable for cutting operations of textiles and fabrics with a minimum of 50% synthetic fibre content, for packaging and food. Together with the cutting station which is available both as stand-alone and as table version, RINCO offers components for special purpose machines as well as the ultrasonic hand cutting unit HC35-3 and the ultrasonic hand tacker HT35-2.
|
|
Gluing, Sealing, Welding
Whether you are in need of tools, or complete production lines for gluing, sealing or welding, Schober is always the right contact. Years of experience in the following fields make us the perfect partner.
Ultrasonic welding and sealing machines for sanitary napkins, diapers as well as to apply a variety of materials.
Heat-sealing cylinders
Gluing stations
Cross and longitudinal gluing modules for business forms and payroll documents.
Just ask us for a simple sealing or welding test of your material
|
|
We propose a wide range of textile, technical textile and PP cutting equipments :
- Ultrasonic cutting/welding devices to be installed on weaving looms
- Ultrasonic cutting/welding devices to be installed on PP weaving looms
- Ultrasonic cutting/welding devices to be installed on stenters, inspecting machines or off-line machines
- Complete benches for edge or central cutting
- Cutting + punching or marking machine
- Manual cutting devices
|
|
Ultrasonic cutting equipment.
* Cutting equipment to build in an existing cutting table is also available such as an electric cutting knife with guiding profile.
* Ultrasonic equipment built in an aluminium guiding profile provided with a clamping device, ultrasonic handpens to cut out shapes on a glassplate.
|
|
|
|
|
|
WINDING FOR SAMPLE-PIECE AR Series 07' Full optinal
The range of product
AR series, are been projected and studied for the winding and the quality inspection of the fabric. Destined to all the firms with the necessity to control small and middle quantities of fabrics; their great versatility it’s a support to many productive realities where exists the necessity to verify and to measure a large typology of fabric. Particularly...
· Work: mixed Lycra over mixed viscous,
elastomer; wool in the various typologies;
· Machine projected for fabric h 160÷260 cm;
· 5-40 m/min inspection whitout interruptions;
· Tolerance of verify 0.2%.
The machine can be equipped, according to the necessities, with:
· Inspection adjustable table for perform small
operation of qualitative follow-up;
· Relocation wheel for a best handiness and
management in own business apparatus;
· Digital management of the meters of fabric worked
with automatic stop to meters;
· Management of fabric tension;
· Management of hardness roll;
· Auto-centring module for a perfect alignment of the
selvedges
· Weighing system
· Auto-drawing belt
|
|
|
AR series, are been projected and studied for the winding and the quality inspection of the fabric. Destined to all the firms with the necessity to control small and middle quantities of fabrics; their great versatility it’s a support to many productive realities where exists the necessity to verify and to measure a large typology of fabric. Particularly...
|
|
We have perfected the design & manufacturing of wide range of Fabric Rolling Machines available in various working widths which are easy to operate, technically advanced and programmable machines in the field of fabric quality control. Being developed by highly qualified engineers having vast experience of this field, our machines are equipped with all necessary features like tensionless handling, accurate length measuring, Straight roll selvedge, variable roll hardness, auto cutting etc.
! Available in various working widths.
! Speed variable from 0 – 50 mtrs/ min.
! Compact & crease free rolling on winding tubes.
! Max. Roll dia. from 100mm – 1000mm.
! Length measurement by reputed counter meter.
! Straight & uniform roll winding through efficient selvedge guider.
! High Production Efficiency.
! Operator friendly, improves productivity, reduces labour
|
|
Features:
- Complete structure on wheels is made on M.S. rectangular/square pipes.
- M.S. moving pipes cradle at the feeding of fabric from rolls.
- Provision of laminated loose wooden platform on the cradle for putting plaited fabric.
- Tensioning device to give tension to the fabric as necessary.
- Two M.S. rubber fillet coated roller to roll the fabric on paper/PVC tube by surface winding.
- Side ways upright guides prevent shifting of tube.
- Perfectly aligned straight edges in tunes of +/- 1 to 2mm in our model with automatic edge guiding system. The device comes with a electronically operated motorized screw type arrangement, thus doing away with requirements such compressed air etc.
- The whole structure is on Castor wheel for easy movement of the machine.
- Occupies very small amount of space. Small rolls can conveniently be made in small spaces, offices, godowns, etc.
- Meter Counter is installed in front on platform top for easy reading
|
|
| ... products without technical information |
| |
|
|
Production machines for the textiles industry
