|
|
MultiMaster Vario Active-Carbon Cartridge System CKG
The CKG mounting frame is manufactured from galvanized steel. As an alternative, 1.4301 steel is possible.
Special features:
- Mounting frame for 16 active-carbon cartridges
Application:
- Filtration of odours and pollutant gases
Technical data:
- Air-flow rating: 1,000 – 144,000 m³/h
- Filtration rating: Up to 99%, depending on the length of the contact period and on the type of pollutant gas
- Maximum operating temperature: 40°C
- Maximum relative humidity: 70%
- Weight (mass): 305 - 1324 kg
|
|
Specialty Membranes
CUNO manufactures a wide range of native and charge modified, symmetrical and asymmetric nylon membranes; as well as micro fiber polypropylene media. These solid supports can be customized to suit your specific needs. When it comes to innovation, CUNO has the answer to your solid support membrane needs.
Please contact CUNO SMP for information on designing a solid support structure to fit your exact requirements.
Applications Include:
* Lab Filtration Devices
* Disk Filters
* Medical and Dialysis Filters
* Roll Stock
* Cartridge Filters
* Diagnostics
|
|
|
|
|
|
‘Becone’ Knitted Mesh Coalescers
The 'Becoil' Demisting Unit is a high efficiency, low loss device for removing liquid particles in excess of 5 microns. To further the collection efficiency below 5 microns, the 'Becone' Coalescer was developed.
The unit is a pad fabricated from a composite fabric consisting partly of monofilaments and partly of a staple fiber yarn exhibiting along its length the ends of the staple fibers composing it. These fibers are much smaller in diameter than either the yarn into which they are spun or the monofilaments - consequently forming a more efficient filter.
The multitude of fibrous ends presented to the gas flow reduces the streamline effect, trapping the fine droplets within the coalescer, and the coarse droplets so formed are re-entrained in the gas stream leaving the coalescer. These larger droplets are than easily removed by a conventional 'Becoil' Demisting Unit.
The combined 'Becone' and 'Becoil' installation increases collection efficiency to 98% in the 2-5 micron range and these results have been substantiated in many installations.
Pressure loss is increased but not dramatically since the 'Becone' Coalescer still has a considerable free volume, even allowing for the introduction of fibrous yarn.
|
|
AR-Filterbags: Size 0
- diameter: 102 mm
- lenght: 229 mm
- area: 0,09 m²
- Collar/Ring types: Zinc Plated
|
|
Liquid Filters
AMERICAN FABRIC FILTER CO. provides a complete range custom manufactured liquid filter bags for all standard and most custom vessels in plain or glazed felts from ½ to 100 micron and mesh from 5 to 800 micron.
Construction options include plastic, carbon, stainless and PVC-coated steel rings; handles, draw strings and muslin or mesh (multi-layer) covers.
All filters are custom manufactured to meet your requirements. Please have the filter style designation or measure the length, flat width of the bag and ring diameter (if used when requesting a quote. For unusual or difficult to measure applications, a sample bag that you know fits is most desirable.
|
|
|
|
|
|
Strainer Bags
Menardi manufactures high quality liquid filter bags to fit standard size filter vessels, as well as custom designed products where requested. The constituent materials have been chosen for their purity, ensuring consistent high quality and performance. Filter bags are available in traditional stitched form or with a fully welded construction, and are fitted with a comprehensive choice of rings.
Menardi is a leading manufacturer of fully welded filter bags, which are available for applications requiring standard polypropylene or polyester felts, extended life felts or high efficiency media. All seams are welded rather than sewn, and combined with either of our positive sealing moulded Welseal (polypropylene or polyester) welded rings, no process liquid can bypass through needle holes caused by the sewing process or around a sewn snap ring. The Welseal ring forms a hermetic seal between the filter bag and housing, eliminating any possibility of bypass around a steel ring, which is a potential source of product contamination. These features ensure that fully welded filter bags perform to a higher efficiency than a sewn equivalent.
|
|
Rosedale High Efficiency Filter Bags
Our HI-E series of bag filters meets the most stringent needs for fine process, hydraulic fluid, and lubricant filtration. All are made of unique microfiber materials, designed to increase the efficiency and dirt-holding capacities of these bags.
Microfiber Material Construction
Polyester or polypropylene microfibers and standard fibers are variably calendered to produce a single layer of microfiber material. Our unique construction can provide filtration to a 1 micron rating. Polyester microfiber material should be used where oil adsorption is not desirable or where higher temperatures are required.
Filtration Level
These bags have been tested by an independent laboratory to determine the filtration efficiency and dirt holding capabilities for each. They have been manufactured so that the efficiencies for both polyester and polypropylene are identical.
|
|
With years manufacturing experience, ST Filter is capable to produce different types of customized bags. The bags can be made from woven and non-woven fabric, even from metal materials. ST Filter can either stitch or weld the bags into different shapes to fit for various working conditions from all customers needs.
Fabric Materials:
Woven and non-wovens fabrics: Polypropylene · Polyester · Nylon · Nomex · PTFE · Nylon monofilament · Polypropylene monofilament · stainless steel monolilament· Copper monolilament.
|
|
|
|
|
|
U.S. Air Filtration can provide dust collector filters (liquid filter bags) for all types of liquid filtration systems. We offer a complete line of replacement and custom designed dust collector liquid filters to fit most manufacturer filter bag housings.
Our liquid filter bags are carefully fabricated and sized to ensure ease of installation and change-out. Liquid filter bags are available from 1 to 1500 microns to suit your application. Standard felt bag materials include polypropylene, polyester, nylon, nomex, or absolute rated polypropylene micro-fiber material. Mesh bags are constructed of nylon monofilament, polypropylene monofilament, or polyester multi-filament material. For high purity applications we offer FDA compliant PolyMicro® BOS series bags which have seamless construction, graded density media, and the patented Polyloc® ring which provides a hermetic seal between bag and housing. In addition to edible oils and other food and pharmaceutical applications, liquid filter bags are also ideal for use in semiconductor and cosmetics manufacturing.
|
|
|
PROGAF filter bags bring a new, high-performance alternative to applications requiring absolute filtration. Their progressive density depth filtration delivers high efficiency (up to 99.9%) and long life like a filter cartridge with all the convenient features of a bag filter. In comparison with other filtration technologies, PROGAF delivers lower operating costs while retaining the ease of change-out typical of a bag filer.
|
|
1. Element diameter is 63.5 mm with cover.
2. Pressure drop calculations based on 20 micron elements.
3. Element length is for mesh pack and does not include end fitting.
4. Polymer viscosity is 250 Pas (2500 Poise).
5. Design conditions are 241.5 Bar (3500 psi) and 343.5C (650F).
6. Vessel material is 304SS and system is designed per ASME Code.
7. System configuration is MPST's patented close-coupled design.
8. System includes manual vent valves and hydraulically automated diverter valves with control panel.
9. System prices are Ex Works Maag Factory.
|
|
|
|
|
|
Polymer candles
Polymer candles are the choice of the processor when it is important to have the lowest capital cost combined with ease of replacement, lower downtimes and overheads. Candles are available in pleated stainless steel fibre (e.g. for PET film, fibre and resin) or cylindrical woven meshes (e.g. for BOPP film) utilising stainless or speciality steels. Our designs encompass the fully welded, REMPAKTM and re-coverable versions, with the last two options representing a lower cost product where the valuable hardware can be reused when the media has reached the end of its life.
Our candles are available in industry standard designs, or can be custom designed to fit any particular housing. With high strength, they are available in filtration ratings from 3-100 microns, and would normally be supplied with an outer guard both to protect the media. Our range of high strength, highly permeable steel stainless fibre media gives candles with low initial pressure drops and long on- stream life.
Our candles are readily cleanable with current technology and we would be happy to advise on appropriate cleaning methods available.
|
|
|
|
|
|
|
EUROFILTRAZIONE is a leading company in the production of filter elements for industrial applications, and produces a complete range of filter cartridges for EDM machines, of both edge and plunge type. The use of filtering materials specifically conceived for this purpose, ensures the best possible results. EUROFILTRAZIONE filter cartridges are in fact top of the range both in relation to national and foreign production output. The winning features of these cartridges being a high filtering capacity with low charge loss, and considerable storage capacity in even the most severe operating conditions, thereby ensuring the long working life of the product. Thanks to these features, and highly competitive price levels, it possible to greatly reduce filtering and electro-erosion costs without in any way jeopardizing performance levels. EUROFILTRAZIONE is therefore a truly top-level manufacturer, capable of meeting customer requirements both with a range of standard products as well as with special products, suitable to face specific challenges.
|
|
High impurity removal rate, excellent dirt-holding capability and longer life extension of the filters are obtained by special filter paper and paper folding.
High impurity removal rate, excellent dirt-holding capability and longer life extension of the filters are
obtained by special filter paper and paper folding.
MTL filters have the following features:
- Filtering ratings: between 3-5 µm.
- Longer life extension.
- Excellent filtration of deionization.
- Great filtration area and filtration efficiency with special origami techniques and methods.
- Stable and durable quality of every filter is assured by strict manufacturing technics and quality
check.
- All sizes and specifications are available to meet customers' different requirements for all types of
machine tools.
|
|
CPD pleated polypropylene depth cartridges are designed for clarifying applications requiring high flow capacity. The depth media utilized in the CPD product line is high loft Melt-blown polypropylene which gives exceptional flow characteristics and high dirt holding capacity because of its high internal porosity. Fine polypropylene fibers are bonded together to ensure no fiber release in a fiber matrix that maintains high porosity. Rated at 99.9% efficiencies make it a cost effective filter designed to extend final filter life.
|
|
Designed always to meet the needs of the cleanliness class, pressure requirements and characteristics of the medium, stable and constant pressure MAHLE filter elements with their high contamination retention ability ensure economical and trouble-free operation. Our extensive range of standard and DIN version products also contains alternative variants for virtually every make of filter and filter element for aggressive fluids, cooling lubricants and aqueous media.
We will also develop special versions to meet individual customer requirements.
|
|
|
|
|
|
The reliability and efficiency of any filtration system is chiefly dependent on the quality of the cartridges used in it. Our full line of quality HILCO cartridges includes various sizes, filtration efficiencies and dirt-holding capacities for virtually every application. HILCO can restore many oils and coolants to a like-new condition.
All cartridges are developed to provide long service life and high quality. Many different media are specially selected, formulated and fine tuned on a regular basis to provide the most effective combination of fluid compatibility, particle-separation efficiency, low pressure drop and structural properties.
Controlled radius pleats are designed to maximize filtration area and dirt-holding capacity while resisting pinching, distortion and rupture. Gasket materials and adhesives are selected based on their compatibility with fluids and operating temperatures of each application. Cartridges feature rugged, fiberglass filled nylon and plated steel centertubes which resist collapse at high pressure differentials.
Fuel gas, process gas, seal gas, H2O injection, and transformer oil applications can also be accommodated by HILCO. We also make HILCO-quality replacements for other brands of cartridges used in lube oil and fuel oil applications.
|
|
|
|
|
|
Cartridge filtration units generally operate most effectively and economically on applications having contamination levels of less than 50 – 80 ppm. For heavier contamination applications, cartridges are normally used as final polishing filters. In the following the basic systems of cartridge filters are listed
Wound Cartridge Filters:
- the most common type of depth filters
- materials: natural or synthetic yards, which are wounded around a central tube or former
- numerous applications in the industry
Bonded Cartridge Filters:
- one-piece cordless construction, consisting of resin bonded fibers of solid particles
- their filtration range is between 5 to 125 micron, good chemical compatibility/flow rate
- frequent application: viscous fluids, process duties
Pleated Cartridge Filters:
- today's most common cartridge filter system
- materials: cellulose basis, resin impregnation; polyester, micro fiber glass, polypropylene
- advantages: increased surface area (up to 60 %) compared to traditional cartridge filters
Metal Fiber Cartridge filters:
- material: stainless steel fibers, connected to a mat
- used in the polymer industry
|
|
LyPore Defender is Lydall's newest liquid media series. Extensive R&D coupled with industry leading expertise in wet-laid microglass media results in a series of products that truly push the boundaries of dirt holding, particle removal, and flow.
Our unique blend of fibers and binders are optimized for each grade to provide ultimate performance in a pleated configuration. While initially designed for hydraulic filters, LyPore Defender can be used in virtually any industrial liquid application that requires high performance and long life.
These grades are optimal when co-pleated with multiple support layers and can be used as the sole efficiency and dirt holding layer or in conjunction with a separate pre-filter. The LyPore® Defender series is available in standard acrylic latex binder or optional epoxy binder for more demanding fluid and temperature requirements.
|
|
Liquid Filtration Media
A suite of liquid filtration media optimized for a wide range of filtration applications, including hydraulics, metalworking, process filtration, power generation, chemical, electronics, bio-pharmaceutical, medical diagnostics, food and beverage, drinking water and pre-filtering. With its high efficiency, superior dirt holding capacity, low pressure drop and pleatability, Lydall's liquid filtration media advances filter performance in the most demanding of applications.
|
|
|
Extended Filtration Surface. Sixty deepfold pleats multiply the available filtration surface area. This construction offers greater contaminant holding capacity compared to the cylinder-type tube. Other advantages of the Sethco Pleated Filter Cartridge are high strength, polypropylene construction, resistance to deterioration, inertness to tough liquids such as corrosive electroplating and sensitive photo and processing solutions. Reusable and long lasting under the toughest liquid conditions make it ideally suited to all industrial and laboratory filtration applications.
|
|
|
|
|
|
Mikropor Continuous Wound liquid filters (MW) feature a special diamond pattern which maintains uniform micron retention throughout the length and depth of the element and provides superior particle trapping capabilities.
Mikropor continuous wound liquid elements also eliminate the problems of segmented elements, such as contaminate by-pass, inconsistent micron retention, flow restriction and reduced filtration area where joints are over-wound.
Mikropor Wound liquid cartridges offer a gradual pressure increase during cartridge life while surface-type media experience abrupt flow cutoff when loaded. Each layer on Mikropor wound cartridges contributes to true depth filtration by trapping its share of particles. Furthermore, the irregular outer surface reduces surface binding, delivering both longer cartridge life and full cartridge utilization.
Applications for Mikropor Continuous Wound Filters
- Fluids Chemical Industry
- Electronic Industry
- Polymer Solutions
- Pharmaceutical
- Electrical Power Generating
- Petrochemical & Refineries
- Printing Inks
- Reverse Osmosis Units
- Pre-Treatment Oxidizing Agents
- Electroplating Solutions
- Process Water
- Concentrated Alkalis
- Cooking Oils
- Oil & Gas Mineral Acids
- Photo Solutions
- Food & Beverage Industry
|
|
We design filter cartridges which have hinged bolts damp lids. These cartridges are used for a variety of applications like filtration of hydraulic oils, lube oils, fuels, cutting fluids, coolants, washing fluids etc., Their housings are sized depending on the application & rated flow requirement. These can be designed for higher pressures. The housings of verity of material of construction are supplied depending on the requirement.
Working:
The dirty fluid is pushed in the filter housing under pressure. Filter elements of correct filtration rating are placed in the housing depending on the flow & other requirements. The ends of the filter elements are sealed so that the fluid is made to pass through the filter medium only, to leave the dirt on the filter medium. Generally the inlet & outlet are in one line. However the position of the inlet could be altered as per the requirement.
|
|
|
|
|
|
Betafine® XL Filter Cartridges
Providing Reduced Total Filtration Costs and Predictable Filtration Performance The Betafine XL filter represents a major advance in pleated filter technology. Building on Cuno's history of filter design innovation, this absolute-rated, 100% polypropylene, pleated cartridge features a patent pending Advanced Pleat Technology (APT) that increases the usable filtration surface area while maintaining standard industrial cartridge dimensions. The result is a filter cartridge that dramatically enhances service life to provide:
* Reduced Total Filtration Costs: Fewer cartridges used, reduced cartridge change-out frequency, reduced downtime and product waste, and reduced labor and disposal costs.
* Predictable filtration performance: Reduced quality checks, reduced product rejects and rework, and increased productivity and plant capacity.
Advanced Pleat Technology™
The service life of a pleated cartridge is often dictated by the accessible surface area. Conventional pleated filters may offer a large gross surface area, but when the media is packed too tightly into the cartridge, only part of the surface area is usable resulting in both flow restrictions and limited contaminant holding capacity. The "blind" or unusable area commonly occurs near the inside diameter where the pleats are packed most tightly.
|
|
You need cartridge filters with long life, high efficiency and low total operating cost and that's what you get from GE Water and Process Technologies. With an extensive range of filters to meet all of your microfiltration needs:
- RO pre-treatment
- Pure water filtration
- Food and Beverage
- Electronics
- Oil and gas
- Chemical processing
- Pharmaceuticals
- Medical
- General industry
GE provides, and continues to develop, high-performance products backed by years of experience. Our cartridge filters are made with no wetting agents, solvents, anti-static agents, or binders. FDA-compliant filters are available for food and beverage contact.
|
|
Claris® Series Filter Cartridges
High Consistency Polypropylene Melt Blown Cartridge
Graded Pore Structure Enhances Dirt Holding Capacity
E-core, an Extruded Fibrous Core, Provides Excellent Strength
Unique Proprietary Process
Easy and Safe Cartridge Incineration and Disposal
All Polypropylene Construction
Free of Surfactants, Binders, and Adhesives
NSF Certified
Plastic and Metal Spring Assembly End Configurations Available
Performance Specifications
Filter Grades:
1, 3, 5, 10, 20, 30, 50, 75 µm
Maximum Differential Pressure:
50 psid (3.45 bar) @ ambient
25 psid (1.72 bar) @ 140°F (60°C)
Recommended Change Out Differential Pressure1:
35 psid (2.4 bar)
Purity:
Claris Series filter cartridges are free of surfactants,
anti-static agents, binders, and adhesives.
|
|
|
General grade membrane cartridges are designed for general purpose use wherever a cost effective membrane filter is required and is offered in polyethersulfone, nylon, Teflon, and polypropylene. Designed to hold the maximum amount of filter media that can be completely and effectively utilized in a cartridge, General grade membrane filters lower the cost of filtration . Membrane cartridges are flushed with 17+ megohm-cm water to remove potential extraneous manufacturing debris. These cartridge modules are also individually tested. Priced below special purpose cartridges, General grade membrane cartridges are still manufactured with the same careful attention to both quality and performance.
|
|
The filter elements are manufactured by isostatic pressing or co-axial pressing. The pore size can be adjusted by suitable selection of the powder size fraction and the process parameters. It includes the type of tube, disc and stack of lamination and so on.
Main advantages
1. Good shape stability
2. High strengthen and good integrity
3. Controllable pore sizes and porosity
4. Good permeability
5. Good corrosion and thermal resistance
6. Easy to be made into complicated shapes
7.Highly mechanical strength, can diffusing air homogeneously.
|
|
|
|
|
|
3-inch and 4-inch diameter modules available in 10-foot and 12-foot lengths.
The use of KMS SUPER-COR® membranes for juice processing eliminates the need for pretreatment and associated handling equipment-no more centrifuges, screens, rotary drums, diatomaceous earth, or fining agents. It also does away with the maintenance associated with pretreatment processes, saving you time and money. The latest SUPER-COR® modules have a robust backing structure that supports the extended processing requirements of today's juice processing plants.
SUPER-COR®, designed around the needs of juice processors worldwide:
• Higher product yield
• No preprocessing required-eliminates diatomaceous earth and fining agents
along with their associated maintenance and disposal costs.
• Transparent module housing for ease of inspection
• Long membrane life
SUPER-COR® Systems, combined with last stage of SUPER-G® modules, clarify juices at extremely high yield rates. Up to 98% yield can be achieved without adding diafiltration water.
|
|
Biofil PES
Incorporating a hydrophilic membrane, the Biofil cartridge has a unique mirrored asymmetric structure which gives the media added strength and very low clean pressure drops. This helps to ensure that cartridge integrity is maintained when repeatedly steam sterilised. The characteristics of the membrane also results in excellent resistance to hydrolysis, along with low protein binding and colour stripping. Furthermore Biofil PES cartridges have excellent chemical compatibility across the full range of pH values.
Biofil PES cartridges have been validated and are ideal for applications ranging from the production of beverages to the filtration of blood and serum. They compare favourably in many applications with alternative cartridges manufactured using Nylon, Cellulose and PVDF.
|
|
|
|
Filter elements for liquids: cartridges, housings..
