|
|
| Products 121 to 150 of 255 |
Fuel Manager Style Filters
Baldwin Filters design incorporates a removable, all-metal, self-venting drain valve into the filters assembly for full compatibility with OE designs. All OE drain valves, sensors and bowls may be used with the Baldwin design.
The Baldwin Design
Baldwins design removed the OE raised Ckeys to allow universal fit on multiple OE fuel bases.
This makes filter installation easier as no alignment to the mounting head is necessary.
All primary filters are painted red, while all secondary filters are painted white. This color coding helps determine, at a glance, that the proper filter is being installed.
The metal drain valve adds versatility of use on both standard and marine applications.
Baldwins removable self-venting drain valve is standard on these filters; however, the filter can be used with the Baldwin drain or removed for use with the OE sensor or bowl.
|
|
Applications
Fine filter for diesel and gasoline
Advantages
Extensive range
OEM quality
Recommended by machine producers
Complete solutions with filter head
|
|
|
KMPT has further developed the process of Dynamic Crossflow Filtration. In this process rotating ceramic or polymere discs generate a turbulent differential speed of the feed. This effectively prevents the development of clogging layers which obstruct the filtration. Energy savings of up to 80 % are the key benefits of this new method. The possibility of processing a higher concentration of the retentate to viscosities of 700 mPas opens up new fields of application. The user therefore benefits from technical solutions for his specific problems as well as a process which offers better economic efficiency.
|
|
The ULTRA-COR® module from KMS:
• Accommodates high solid density materials through multiple ½" diameter tubular membranes
• Resists plugging from high solids concentrate
• Withstands high operating temperatures, pH extremes, abrasive particles and has superior chemical stability
• Forgiving of system upsets
• Is easy to clean; Does not require flow reversal.
• Compact design, utilizing seven ½" diameter tubules inside each 1¼" diameter shell
ULTRA-COR® membranes are available from KMS as replacements in existing systems and for new systems. They can retrofit a 1" FEG™ tube, with certain modifications. They are available in 5' and 10' lengths.
|
|
|
|
|
|
For Wastewaters containing oily emulsions or very fine suspended solids, Sanborn’s Ultrafiltration Membrane Systems have proven to be the most reliable treatment solution. Sanborn’s Tubular UF Systems are easy to use and maintain and use less energy and do not generate the airborne pollution that evaporators do.
UFV250 Systems
The UFV250/500 is a tank mounted compact system. Processing up to 500 gpd, these systems can reduce waste up to 98% without the use of chemicals. Typical applications include filtration of spent coolants and emulsified coolant oil contaminated wastewater, mop water, vibratory waste solutions and compressor blowdown.
UFV750 Systems
The UFV750/1500 is a tank mounted compact system. Processing up to 1500 gpd, these systems can reduce waste up to 98% without the use of chemicals. As with the UFV250, typical applications include emulsified oil removal from spent coolants, filtration of mop water, vibratory waste solutions and compressor blowdown.
High Capacity UF Systems
Sanborn Technologies' high capacity UF systems employ wide-channel (1/2") tubular membrane technology to separate water from suspended solids and emulsified oils. With process rates up to 6000 gpd, these membrane systems are delivered pre-assembled complete with controls for easy installation.
PUFS-E - The Simple Solution for small wastewater generators
Sanborn Technologies pioneered the use of small spiral membrane systems on oily wastewater over two decades ago with the PUFS-E. The PUFS-E eliminates up to 98% of the water in oily wastewater mixtures. Operating on top of it's own 55 gallon tank, the PUFS-E can process up to 50 gallons per day.
|
|
|
|
|
|
The structure of the membrane filter is simple, it is sealed with a silicone rubber close circle and bolt between the top cover and the body. Inside the membrane filter core is fixed to the diaphragm. The filter is divided into two for an initial water room and a purification room, there are inlets and outlets, or outfalls. Material can be selected for 316L (304L) stainless steel.
Applications
1. liquid filtration
-the pharmaceutical industry, various syrup filters, injection water injections saline injections without filtration.
-industrial water, water, gas water clarify degerming.
-beverage, food, brewing industry filter.
-electronics, optical lens grinding high water.
-the chemical industry pH liquid filtration Alcohol recovery.
2. gas filter
-the pharmaceutical industry, acidic gases, dry dust.
-pharmaceuticals, beer brewing industry preparation of sterile air.
-the aviation and transportation industries, high-pressure air filtration.
-the chemical fiber industry with mixed gas purification.
-Impurity oil filter in various air compressor
|
|
|
Magnetic Filter for liquids. These are purifiers suitable for elimination of magnetic particles contained in any type of more or less fluid liquid. They allow removing obstructions in burners, gums, valves and further parts of the installation.
|
|
- Magnetic filter
- Easy maintenace an cleaning
- Housing in brass or bronze material
- Connection from 1/2" to 3" Gas-F
- Magnetic separator in Barium-Ferrite
- Basket filter AISI-304
|
|
TYPICAL APPLICATIONS
EFS
Standard size housings available with 30 (590), 60 (250), 100 (149), and 150 (99) mesh (micron) reusable, stainless steel filter cartridges. Units measure 11.25" long and feature a 1" NPT intake and dual 1" NPT discharge ports (3/4" reducers provided).
FEATURES
Graymills Superflo filters are designed to overcome the typical pressure drop and reduced flow due to clogging that occurs with ordinary filters. A permanent magnet suspended over the intake port traps ferrous particles which find their way into the fluid, and diffuses the flow outward into the filter screen flutes. Filtered material is trapped on the inside of the removable/reusable stainless steel filter cartridge. To clean, just remove the cartridge. All the contaminants come out with it. Self draining. No wasted fluid or messy leftovers to deal with. Stainless steel filter cartridges are available in four different mesh screens.
|
|
|
Drop-in magnetic separator filters, designed for fluid tanks and reservoirs, pull fine particles out of fluids and hold them until the unit can be cleaned and dropped back in. Used in tanks or other containers having low to moderate flows. Direct blast of fluids over unit is not recommended.
|
|
|
|
|
|
These magnet filters are used to filter ferrous particles from liquids and they are frequently used in hydraulic circuits and cooling systems. The magnet system is constructed from ceramic magnets and the unit is built into a stainless steel (AISI 304) casing. For cleaning, the magnet system is simple to remove by undoing several quick-release fasteners. A special double-walled version is available for use in heated pipeline systems (for example, separating ferrous particles from molten chocolate and cheese). Bakker Magnetics magnet filters are available in a number of versions for special applications. For situations where extremely stringent requirements for ferrous separation have to be met and/or tiny ferrous particles (m region) have to be extracted, a system can
be fitted with Neodymium magnets (add "/01" to the article number). A special version is available for use in systems with high pressures. Sanitary models are also available for applications in, for example, the food industry. For processing large quantities of raw materials, heavy-duty versions can be supplied. These versions have a processing capacity from 1000 to 8500 l/min.
|
|
Bunting General-Purpose Grate Magnets provide a properly configured, high-density magnetic field to trap and hold ferrous fines, fragments, and small metal objects. Stainless steel tubing and frames are welded into strong, integral units. They can be installed - or simply laid - inside hoppers, housings, and bins - and easily removed for cleaning. Grates are built for low-abrasion applications and should measure at least twice the size of your outlet opening, so as not to restrict product flow.
General-Purpose Grate Magnets consist of multi-polarity 1-inch diameter cartridges arranged on 2-inch centers. They're available in round, square, and rectangular configurations from 4" through 36" in size. They can be ordered without baffles for freer flowing materials, and with angular baffles for maximum magnetic protection.
|
|
As pre-cleaners or main cleaners for subordinate applications and magnetisable chips, magnetic filters offer a good and reasonably priced filtration method.
Turbo Separator AG produces magnetic filters with flow rates of 100 - 400l/min.
Depending on the application area, these magnetic filters can also be built up in cascades.
Magnetic filters from Turbo-Separator can be installed as integrated components of a system or built on as accessory products.
Special requirements call for special solutions - we shall implement your wishes, with unconventional solutions if need be! (SE magnets)
|
|
Parker's Tanktopper Series features:
• Flows to 18 gpm
• 3 micron to 120 micron absolute
• Disposable or recleanable elements
• Visual and electrical indicators
• Microglass long life elements
• Inside-to-outside flow through the element
• Complete contamination removal during element service
• Optional magnetic prefiltration
• Optional dipstick
• Optional airbreather
• No tools required for servicing elements
|
|
KE is a side beam filter press with reduced dimensions, suitable to be installed even in very small spaces. Thanks to its solid structure and simple design, this type of filter is an extremely functional machine.
KE filter presses, exactly like the other bigger machines manufactured by DIEMME, have been designed to also work at high feed pressure values: 12,15, and 30 bar.
|
|
Implementation of the PURON® Technology: Submerged Hollow Fiber Modules
In a commercial system the individual fiber bundles are connected in rows. Several of these rows are mounted in a stainless steel frame forming a membrane module. The PURON® module is available in standard sizes of 1500, 500 and 250 square meters of membrane area. The design of the PURON® module was specially developed to meet the extremely tough requirements of a membrane bioreactor (MBR) when utilized in wastewater treatment.
|
|
The PACT package sewage treatment systems have been designed for useing in areas not connected to a central sewerage system, such as Hotel, Airport, Cantonment, etc. To meet various request PACT provides three different type of packages:
• Conventional biological treatment package
• Membrane Biological Reactor (MBR) package
• Moving Bed Bio-film Reactor (MBBR) package
Standard Components (common to the three Series)
• Tanks for aeration, settling and chlorine contact
• Roots type blowers complete with motor, silencer, flexible fittings and baseplate
• Air-piping and fine-bubble diffusers. Diffusers are removable for easy maintenance
• Sludge air-lift pump (recycling and waste)
• Disinfection equipment
• Interconnecting piping and fittings
• Electric control panel
• Packaged magnesium anodes for cathodic protection of steel tanks
• Ladders and walkway for above grade tanks
|
|
DIEMME Filtration develops special customised designs of mobile filtration plants with filter presses, in order to meet any customer's requirements.
The advantages of DIEMME mobile filtration units:
- Compact
- Complete plants for all applications
- Easy personnel access to the plant, for both operation and maintenance
- Capable of wide range of applications with the employment of different
sludge conditioning methods
|
|
These high-capacity filters and strainers require no flow interruption for servicing
- For use with filter bags for filtering to as fine as one micron, or with perforated strainer baskets
- From 2 to 10 Model 8 housings are mounted in parallel to inlet and outlet manifolds
- Each unit has inlet and outlet valves, gage ports, and a drain port, to permit servicing one at a time
- These are completely packaged free- standing systems in carbon steel and stainless steel
|
|
Application
In the high pressure circuits of hydraulic and lubricating oil systems.
Performance features
Protection
against wear: By means of ultra-fine filter elements that meet even
the highest demands regarding cleanliness classes and
dirt-holding capacity.
Protection against
malfunction: By means of permanent filtration in the off-line circuits
excellent cleanliness classes can be achieved.
Special design features
Cover: The cover can be opened without special auxiliary tools.
Because of the cover design the filter element can be
changed almost without losing any oil.
Flow control valve: Over the flow control valve the FNS off-line filters are
connected directly to the high pressure pipe. The surplus
volume (e. g. in circuits with fixed displacement pumps)
from the high-pressure circuit is cleaned by the ultra
fine filter element.
Dirt
retention valve: Ensures that dirt accumulated in the filter is removed
together with the element. Settled dirt cannot return
into the system.
|
|
Off-line filtration is in many cases the only feasible principle to achieve the required system cleanliness in fluid power systems. Off-line or kidney loop filter units consist of a circulation pump coupled to an appropriately sized and selected oil filter. The oil is circulated through this external filter system independent from the existing or non existing flow in the main system.
The programme comprises small compact standard units as well as customised subsystems of variable sizes.
Off - Line filter BNF series
Interchangeable DIN filter elements
Low noise emissions
Easy installation
May also be used for filling and draining the reservoir
Compact dimensions and easy to install either on the tank top or side. DIN elements provide qualified system cleanliness.
|
|
The DUO3 off-line oil filter increases the availability and reliability of hydraulic and lubricant oil systems. For optimum oil filtration performance, more often than not filtering takes place in off-line circuits, where the oil filter can operate 24 hours a day independently of the main system, avoiding any changes in pressure and flow.
Fields of application
Typical fields of application include hydraulic systems, lubricating systems, hydraulic presses, injection moulding machines and machine tools. When rebuilding a system we recommend installation of an off line oil filter.
Design
Its low noise level and compact size make the DUO3 ideal for use in many different machines and working environments. For uniform and good circulation and oil filtration, the DUO3 has been fitted with a low pressure pump from our QPM range. This pump has few moving parts and is designed to have a long service life and consume little power.
|
|
CJC™ Fine Filters are offline oil filtration systems with integrated circulating pumps for off-line installation. The filters are recognized around the world as highly efficient purification systems for applications involving hydraulic oil, lubrication oil, gear oil, quenching oil, phosphate esters and more.
CJC™ Fine Filters are ideal for controlling oil contamination levels for particles, water and degradation products (oxidation resin/sludge, varnish).
The CJC™ Depth Filters have a filtration degree of 3 microns absolute and a very large dirt-holding capacity.
CJC™ Fine Filters deliver measurable customer benefits: lower operation and maintenance costs, increased productivity, and maximum lifetime for system components, in-line filters and oil.
The modular filter units are built and sized to specific customer requirements - whether the oil volume is 2 litres or 200,000 litres.
|
|
Contaminated oil is drawn into the Parker Portable Purification System (PVS) by a vacuum of 25 In/Hg. The oil passes through the in-line low watt density heater where the oil is heated to an optimum temperature of 150° F (66°C).
The oil then enters the distillation column where it is exposed to the vacuum through the use of special dispersal elements. This increases the exposed surface area of the oil and converts the water to vapor form, which is then drawn through the condenser by the vacuum pump.
The water-free oil falls to the bottom of the column and is removed by a heavy duty lube oil pump. This pump forces the dry oil through a final particulate removal filter. Clean oil passes out of the unit, back to the reservoir — and into the system.
|
|
Whether your main interest is throughput, ease of use, or flexibility of scale and separation methods, there is a CombiFlash system to fit your workload and automation needs. Rely on CombiFlash from Teledyne Isco for superior performance in organic purification.
Check out the new CombiFlash Rf to discover Isco's latest advances in automated chromatography. CombiFlash Rf combines more fraction capacity, intelligence, ease of use, and security/safety features with the smallest footprint of any automated Flash system.
|
|
|
|
|
|
Simple and Intuitive Interfacing guides the user and gives status prompts and alerts together with online diagnostics and network data retrieval. The adjustable single-panel touch screen is simple to navigate and control. Fraction tracking is managed by a real-time color display with peak-to-tube and tray correlation making it easy to choose the right fractions for workup.
Plug-n-Play Interaction incorporates automated solid or liquid sample loading, auto-air purge of spent cartridges, and a self-cleaning injection valve. Radio Frequency Identification (RFID) recognizes Reveleris™ cartridges and auto populates cartridge, flow rate, and run-time parameters for ideal separations. Fraction trays, also equipped with RFID tags and optical sensors, trigger run pausing upon removal giving continuous access to fractions for post-run analysis.
Compact Ergonomic Design features a small footprint that fits easily into a standard fume hood. The 12" tilt screen is fully adjustable to accommodate variable viewing heights and easy access to solvents. Cartridges and service panels are conveniently located in the front of the system.
Enhanced Solvent Flexibility delivers binary gradient functionality with four solvent selection, extended reservoir capacity, and chromophoric solvent capability. Solvent management is simplified by automatic waste level and leak detection. Simultaneously purge solvent lines for rapid solvent switching. Solvent safety features include anti-static solvent lines, cartridge pressure sensing, and auto-flow stop if the collection tray is removed.
|
|
|
We manufacture vacuum filters which use consumable filter paper for filtration. These vacuum filters can effectively handle viscous fluids up to 40 Cst. They require lesser space as dirty fluid tank and filter are together. They can easily be designed to handle much larger flows & dirt quantities. They use pump suction vacuum for filtration in addition to gravity head available. Pressure drop used is about 4 m of fluid column. Hence gathers more dirt layer to perform much better than all types of gravity filters.
|
|
Notes:
1. Element diameter is 63.5 mm with cover.
2. Pressure drop calculations based on 20 micron elements.
3. Element length is for mesh pack and does not include end fitting.
4. Polymer viscosity is 250 Pas (2500 Poise).
5. Design conditions are 241.5 Bar (3500 psi) and 343.5C (650F).
6. Vessel material is 304SS and system is designed per ASME Code.
7. System configuration is MPST's patented close-coupled design.
8. System includes manual vent valves and hydraulically automated diverter valves with control panel.
9. System prices are Ex Works Maag Factory.
Options Available:
A. Actuated Vent Valves
B. Drain Valves (manual and actuated)
C. Plunger and spool valves available upon request
|
|
General description
HOFFMANN precoat filters meet even the toughest demands. Duty cycles of up to several days are achieved through special design of the filter surface. The service life is enhanced considerably when used together with a magnetic separator filtering ferritic particles and the consumption of filtration aids is reduced substantially.
HOFFMANN precoat filters operate based on the filter cake and deep filtration principles. Filtration down to 3 µ is possible.
Depending on the task at hand, our precoat filters are available in several variants:
- manual
- semi-automatic
- fully automatic
- horizontal or vertical arrangement of the filter plates
|
|
PACT WGM have been engaged in the research and manufacturing of seperation equipment for 30 years and have supplied more than 3000 filter press units for more than 30 industries, including, chemical, metallurgy , and environmental protection industries. .PACT WGM makes and produces the frame, box , belt , and concentrating dewatering filter press. We can supply singular and entire equipment systems to customers.
CDYA and CDYC are advanced separating systems, which can operate continuously. They include, a driving system, a gravity dewatering system, belts, a washing belts system, guide rollers, an automatic protection system, a filter cake removal system, a pneumatic control tank, and an electric control panel
|
|
|
|
Liquid / solid separators: decanters, centrifuges, filter presses...
