|
|
| Products 121 to 150 of 187 |
IMPACT SOCKETS
Extra Heavy Duty, Single / Double Hex, Standard / Deep Length, for impact / heavy duty manual application, Square Drive sizes from 1/4 Inch to 2.1/2 Inch, A/F sizes from 6mm to 160mm, available in SAE sizes as well, made from Chrome vanadium (EN-47) Alloy Steel with Rust Resistant Black Industrial Finish.
|
|
|
|
|
|
Action
If you work with impact wrenches we advise you to use the right impact socket with your specific tool in order to achieve the best result and the highest safety during the job. Also extension bars, Adapters and universal joints are available.
Surface Drive Sockets are used in places where fast assembling is required. The easy and fast fitting of the socket on the bolt makes it possible to put the socket on the bolt with a running tool and to make the joint.
Sleeve Drive Sockets have been developed by Action at the request of Yokota to improve the quality of a joint tightening with impulse wrenches. Sleeve Drive Sockets minimize play between socket and tool thus reducing “wobble” and stabilizing the torque setting. The use of Sleeve Drive Sockets is not only of benefit to the actual joint but also reduces vibration to the tool and operator, also reducing noise levels and tool wear.
All Action impact sockets are manufactured according DIN 3121 and DIN 3129. Universal joints and thin wall sockets are supplied without warranty.
Worn sockets cause loss of power and wear to the square drive of the tool increases vibration to the operator. Replace your worn sockets in time.
|
|
Adaptors, bit holder, 6972H
Adapter, bit holder
DIN 7427 Form A
Drive 1/4" DIN 3121-G 6,3 ISO 1174
Finish: nickel and chrome-plated.
Material: VANADIUM-EXTRA
For screwdriver bits with 1/4" male hexagon drive: DIN 3126-C 6,3 ISO 1173
* with spring collar
|
|
Lance industries specializes in the manufacture of unusual tooling for industrial Assembly Operations.
We take a pride in creating products that provide long life under the harsh applications of industrial usage.
|
|
Impact Sockets
No. 5 Spline Drive
3/4 Inch Drive
1 Inch Drive
1-1/2 Inch Drive
1/4 Inch Drive
3/8 Inch Drive
1/2 Inch Drive
Hex Bits
2-1/2" Drive
|
|
Delta Regis Tools, Inc.
For production and electronics assembly applications, take a look at our most popular 32 VDC Series. It offers the best in operator comfort, safety, and flexibilty in a competitively priced package. As an alternative, the all-in-one 120 V Shut-off Clutch Series offers similar performance with a few less features at a cost savings. Looking for more consistency in an application currently using a hand screwdriver, battery driver, or drill? Try our 120 V Slip Clutch Series for a step-up in ergonomics and torque repeatability at an economical price.
|
|
Digit screwdriver torque control
You can connect computer to save the test or working value
|
|
|
With torque capacity ranging from 0.5 to 2000 Nm, Stanley's threaded fastening solutions come in multiple geometries and fit the most critical assembly requirements. Real-time monitoring, analysis, diagnostics, and configurations are available plant-wide, with networkable controls.
|
|
|
|
|
|
EC-Screwdriver Spindles Micromat™-E/Minimat™-E
The brushless Electric Screwdriver Spindles with
torque ranges between 0.03 - 4.2 Nm
The EC Screwdriver Spindles allow free programming of the screw tightening process. Within the power range of the selected spindle, the torque value, speed, stand-by and direction of rotation can be adjusted individually to the assembly requirement.
When using these spindles in Robot applications, i.e. in our assembly cell "DCAM", different screwdriving sequences on different screw locations may be achieved within one assembly cycle.
The brushless electric motors provide nearly maintenance-free operation. They are ideally suited for the tightening of screws due to their outstanding dynamics and an achievement of high peak torque values.
Integrated monitoring of torque and angle values allow the exact control of the screw tightening process, as well as the documentation of all important process parameters.
The operation of the screwdriver spindle requires a programmable sequence controller (AST10) with integrated amplifier and a motor cable (available in different lengths).
|
|
|
|
|
|
The electrical screwdrivers from Weidmüller are ideal one-handed tools due to their ergonomic design. They ensure fatigue-proof working in any direction of installation. They feature automatic torque limits and high repeating accuracy.
DMS 3 Rechargeable torque screwdriver
One-hand operation under all working conditions
Switchable to clockwise and counter-clockwise rotation
Two speeds: 200 and 400 rpm
Torque settings approx. 0.2...3 Nm in 6 steps
Consistent performance until complete discharge of battery
Handle swings easily from pistol to rod form
Takes 1/4" bits held by ball-bearing clamping mechanism
Safety lock prevents accidental switch-on
Easy to change from battery drive to hand-operation up to 15Nm
DMS 2 Electrical screwdriver
Torque can be adjusted in four steps, assigned for standard screws M2.5 to 4
Selectable electric switch-off on reaching the preset torque
High repeating accuracy
Start-up with search mode and/or switch to working torque is controlled via the contact pressure on to the screw head
Switchable to clockwise and counter-clockwise rotation
Fatigue-free working due to ergonomic design and low weight
Ideal design allows one-handed operation in all working conditions and at different working locations
Low noise
Low energy consumption
|
|
The smallest and best value torque multiplier, with manual power application from 100 to 13.000 Nm. Particularly light and handy with return stop. The LÖSOMAT high torque multiplier is maintenance-free.
Main application areas:
Steel construction, power plants, transport industry, chemical industry, plastics industry, cable cars, mining, shipyards and paper factories
|
|
|
|
|
|
Norbar gearboxes are built to an extremely high standard of precision. All gears rotate on needle roller bearings about hardened and ground journal pins. As a result, Norbar Handtorques can be relied upon to have a torque multiplication accuracy of 4%, throughout the operating range, taking the uncertainty out of high torque tightening.
No gearbox is 100% efficient and so the velocity ratio (the number of turns that the input has to make to achieve one revolution of the output) is not the same as the torque multiplication ratio. Norbar multipliers are engineered such that each gear stage has a velocity ratio of typically 5.45:1 which results in a true torque multiplication factor of 5:1.
Torque output calculations are therefore a matter of simple arithmetic with little risk of incorrect bolt loading due to conversion errors. Other manufacturer's multipliers often require graphs or formulae to calculate the input torque to achieve a particular output.
The Norbar Handtorque is the most comprehensive multiplier range available. Standard products are available up to 47,500 N.m (35,000 lbf.ft) and 'specials' to 100,000 N.m (73,000 lbf.ft). A range of 'nose extensions' for reaching difficult to access bolts and full range of torque transducers for highly accurate torque monitoring are available.
|
|
Features and Benefits
Maximum rated input of 154 foot per pound (209 Nm)
Maximum rated output of 8,000 foot per pound (10,846 Nm)
Effective multiplication 52.0:1 +/-5%
Reaction system: reaction plate with slave drive
Gear System: three stage planetary
Anti-backlash device: self-contained, 3 position
Product Details
Length 15-3/16"
Weight 50.3 lbs
Gear Ratio 60:1
Head Depth 10-3/4
Head Length 51-3/16
Input Drive 1-1/2" Sq. Female
Output Drive 1-1/2" Sq. Male
|
|
|
Extremely rigid, light, compact sized and maintenance free, the DMF carbon fiber arms is easy to install and ideal for conveyor assembly line. Flexible it is suitable with straight, pistol and angle nutrunners providing the operator extreme comfort and easy manover.
|
|
Power Tools produce a torque reaction transmitted to the operator's hand. This repetitive reaction provoques injuries to the hand wrist and shoulder of the operators. It reduces productivity and increased cost of absenteeism.
DOGA arms solve both issues for a fraction of the costs.
Our range :
- Linear reaction arms
- Articulated reaction arms
- Telescoping arms
- Suspended arms
- Travelling arms
|
|
|
The BA...serie with its optimized and robust design will provide you with Manufacturing quality, extreme operator comfort and higher productivity for many years.
|
|
The Atlas Copco STwrench has a truly modular design, it can be used as a production tool or as a quality assurance tool.
Use the STwrench for production to get
full traceability of the entire tightening operation
including torque control, angle control
and yield control. Or build your wrench to
just tighten your joint with high torque accuracy.
Or use it for quality control to check residual
torque, to perform joint analysis, including
joint behaviour and stiffness, to set the
correct tightening parameters for production
and to test the reproducibility of joint
stiffness on the benches.
Build your own STwrench and create the
ultimate wrench for your specific requirements.
|
|
|
Crane Electronics new angle and torque wrench is more than a simple audit wrench. The torque measurement specialist has merged comprehensive SPC, an advanced torque readout and a superior torque/angle wrench into an ergonomic package that is hard to beat. The wrenches cover a torque range from 0.1Nm to 1500Nm. They have automatic tool head ID and lenght compensation function. Wireless communcation makes Poke-Yoke applications possible.
|
|
Coated torque wrench for working in explosive atmosphere- GD8-56 1/2
-Tightening capacity: 8 to 56 Nm.
-Precision + or - 4mm.
-Automatic release and reset.
1/2" (12.7 mm) square drive for G442 or GSL442 sockets.
-The wrench is identified by a serial number and comes with a verification certificate in accordance with NFX 07.011.
-The wrench complies with NFE 74.400 ATEX II and is not suitable for jobs involving gas and electricity.
|
|
Norbar manufacture an extensive range of high quality torque wrenches to cover torque values from 1 N.m to 1500 N.m. They are designed and manufactured to exceed international standards for accuracy.
In addition to the normal 'adjustable' torque wrenches, Norbar offer Production 'P' Type versions which can be pre-set and dedicated to a particular application. This setting system is designed to discourage unauthorised alteration.
All Norbar torque wrenches are offered as standard with a quality ratchet. For applications where interchangeable end fittings are required, 'Torque Handles' are also available in various models up to 550 N.m.
|
|
|
|
|
|
The best just got even better! TorcUP realizes that sometimes you need just a little more. The Ultra UT Series Hydraulic Torque Wrench is designed to deliver more when you need it the most! The UT series combines all of the beneficial features of the TU, from the Multi-Axis Swivels to the Laser Engraved Torque Chart, along with all internal mechanical moving components being machined from VASCOMAX! Unlike any other brand of Hydraulic Torque Wrench in the world, TorcUP has created a tool with the major components which create torque out of the UNDISPUTED STRONGEST MATERIAL KNOWN IN THE INDUSTRY!
Who says that you have to sacrifice looks for strength? The ULTRA is sleek; with a black housing in the shape customers have proven time and again works for their applications. Good looks are just the start, with a distinct advantage added to the drive plate, segment and ratchet. These three components take the brunt of wear and tear, and in the ULTRA, they are made of Vascomax, which means they are 30% stronger and 15% harder. And to TOP IT ALL OFF - All ULTRA SERIES tools are covered by a 3 YEAR TOTAL TOOL WARRANTY! THE UT COMES WITH A THREE YEAR WARRANTY BECAUSE IT CAN, NOT BECAUSE IT NEEDS TO. With US Patent No. 6,068,068, the ULTRA will remain distinctive among the field of torque wrenches.
Why now, one may ask, the TU is a dependable work horse, strong enough to meet applications and accurate to +/- 3%. With a torque range of 127 Ft/lbs through 11,000 Ft/lbs, the UT Series ULTRA Square Drive Wrench is the wrench you will have for a lifetime.
|
|
Torque wrenches with presettable torque value , 6852/7452/7852
Window clicker wrench with easy to read "Window" scale.
Finish: Chrome plated
Accuracy: ± 3%, single direction.
A pull down locking knob on a grip for quick and easy torque adjustment. Single torque scale for easy use. Interchangable ratchet head. Handle customised to give optimum user comfort.
|
|
DYNALIGHT ELECTRONIC TORQUE WRENCH (ROUND END )
Normes : NF EN ISO 6789
Torque control wrench for quality, maintenance and assembling departments,for precision applications.
general properties:
-1 to 400 Nm range (0.5 to 300ft.lb)
-+ or - 1% precision of the measurement, effected regardless of the hand position.
-Tightening and loosening.
-pre-alarm 80% and alarm 100%( sound and visual).
-Visualization of the measured torques.
-traceability ( all the torques are memorized)
-Automatic zero reset with start-up error message.
-bilingual French/English conversational menu- 4 touches keyboard.
-Automatic locking keyboard against bad handling.
- RS232 output ( PC or printer).
-PC record with conversion diskette to Excel format.
-Round joining (DYL) or rectangular (DYLC).
Specifications:
-autonomy: 55 hours
-memory: 250 torques
-Feed: 9v battery (6LR61)
-display: alphanumerical 16 character DATA "full screen"
-Units: N.m and Ft.lb
-Menu: French/English
-Measure mode: Peak
|
|
Features and Benefits
This Proto Torque Wrench is made from high grade steel for strength & durability
Positive locking mechanism to dial and lock in desired torque
Thin head design to allow access in tight areas
Manufactured to meet ASME B107.14M specifications
The "C" Series torque wrenches meet normal industrial torque applications, general industry, heavy equipment and maintenance
Calibrated to +/-3% in clockwise direction and +/-6% in counter clockwise direction
Product Details
Length 15-1/2",393.7mm
Weight 3 lbs, 1.36 kilos
Drive Size 3/8"
Head Depth 1-1/64"
Head Length 1-7/16"
Torque Range (Nm) 16 - 80
|
|
Applying a precise level of fastener torque is critical in many assembly operations. Teledyne Instruments offers a number of products for measuring fastener torque and calibrating torque wrench tools.
The LC-20 Torque Wrench Calibrator is a microprocessor-based instrument that provides measurements traceable to NIST. Lightweight and portable, it can be used in the field, laboratory or on the factory floor. The LC20 can be purchased as a torque wrench calibrator or a checker.
|
|
Click wrench with fixed ratchet
R.306-5
Technical caracteristics
ISO 6789, DIN EN ISO 6789, NF EN ISO 6789.
- Accuracy ex works : +/- 6 %.
- Reliability of mechanism : 50,000 cycles.
- Compact wrench for confined spaces.
- 72-tooth ratchet (5° increments) for use with sockets.
- One-way wrench.
- Numbered and supplied with an ISO 6789 calibration certificate.
|
|
Lance industries specializes in the manufacture of unusual tooling for industrial Assembly Operations.
We take pride in creating products that provide long life under the harsh applications of industrial usage.
|
|
Socket
can drive all shape but round shape
Any sizes
1/4"or 3/8"or 1/2" sq. dr. available.
Patent product
Made in Taiwan
for electric tools and hand use
|
|
Features:
- All styles of metric and fractional hex sizes through 1 1/4 inch
- 1/4 -1 inch standard square drives
- Special shapes, sizes and drives made to order
- Magnetic, ball, vacuum and other fastener retaining styles
|
|
|
|