|
|
NITTO KOHKI "Delvo" Electric Screwdrivers are high quality tools for professional use, with special emphasis on precise control of torque and long life.
They apply just the correct amount of torque - with sure, positive control always at your fingertips. They are also smooth and shockless in operation, reducing the risk of operator RSI (Repetitive Strain Injuries).
Various types are available to provide controlled torque screwing in ranges from 0.02 Nm to 10 Nm. These drivers are fully supported with accessories for calibrating or setting torques, screw pick-up, and screw counting.
With BalTec’s customer-orientated service and support system we ensure that you are able to use "Delvo" electric screwdrivers with confidence.
|
|
For collated screws Type MGS from 25 - 55 mm
plasterboard, chipboard, cases, sheet materials, packing,
flooring, pre-fabricated buildings,interior fixing, caravans, funiture manufacturing, etc.
TECHNICAL DETAILS
Weight : 2 kg (4.4 lb.)
Torgue: 20,9 N/M
Charging time: ca. 45 min.
No. of revolutions: 3000 RPM
|
|
|
With torque capacity ranging from 0.5 to 2000 Nm, Stanley's threaded fastening solutions come in multiple geometries and fit the most critical assembly requirements. Real-time monitoring, analysis, diagnostics, and configurations are available plant-wide, with networkable controls.
|
|
|
|
|
|
Electric Screwdrivers (Handheld, straight)
Torque: 0.1 - 3.2 Nm (0.9 - 28 in.lbs)
has developed a new generation of handheld electric drivers for use at assembly stations that do not have sufficient air to drive a pneumatic screwdriver. Although slightly larger than the traditional MICROMAT and MINIMAT pneumatic drivers, these new electric tools are ergonomic and available with all the standard options such as push-to-start, trigger-start, "F"-driver, ESD-proof driver, etc.
Three different motor sizes are available. The maximum available torque is 3.2 Nm (28 in.lbs). The torque is adjusted on the mechanical shut-off clutch and offers an accuracy of ±5% standard deviation. The separate low voltage power supply of 30V, respectively 35V, assures safe operation.
Our standard accessory program of bits and sockets can be used with these new electric tools. If the use of finders (without screw-suction) is required, we offer a complete program of Bitholders with pressed-in Finders and Bits.
If the use of finders (with screw-suction) is required, we offer a finder connection set (Optional Equipment).
|
|
|
Ingersoll Rand electric screwdrivers provide unmatched capability when driving small screws into metal or plastic in industrial assembly applications. Without the need for a a plant air supply, simply plug in the tool (for high-torque models) or controller (for low-torque models) directly into your wall outlet and you're ready to start production. The broad platform includes models offering enhanced ergonomic designs and grip surfaces, ESD-safe housings, and exceptional performance in low-torque applications.
|
|
Screw Driver (Variable Speed, Reversible)
- High-power motor: Class-top power input USA, Canada: 750W , Other country: 620W
- Class-top short length of grip portion 206mm (8-1/8") For good weight balance
- Ergonomic design for better operation:
Soft grip housing and handle cover, a new big switch trigger, soft protect cover, on gear cover and inner cover, and one motion detachable locator for better operation
- Robust aluminum gear cover and inner cover
- Class-top low noise 76 dB(A)
- 7.5m(24.6ft.) long cord for covenience in the work site (for USA, Canada, Europe, Russia and Oceania)
|
|
HSP Handheld Screwdriver
with automatic feed system for screws and headless pins
- Compact and ergonomic design
- Automatic bit stroke
- Short changeover times
- Maximum flexibility
|
|
ELECTRIC TORQUE WRENCHES
Square drive ¾ Inch to 2-1/2 Inch, Adjustable torque range from 50Nm to 42120Nm, 40lb.ft. to 31000lb.ft., with brushless synchronized motor drive with microprocessor controlled system to shut off precision of the drive motor, single phase connection suitable for 100V to 253V and frequency of 45 to 66Hz, with heavy duty planetary gear box, with reverse-forward drive for loosening and tightening, having idle speed from 0.6 to 38 rpm.
|
|
The LÖSOMAT high torque electric wrench, in straight and angled version, has two gears, infinitely adjustable torque and cut-off electronics. This electric wrench is indispensable for maintenance, assembly and service.
Main application areas:
Maintenance and assembly
|
|
User
Any operator trained in torque and angle tightening
Description
- Torque tightening can be programmed or directly read
- Angle tightening can be programmed or directly read
- Both Torque & Angle can be programmed for single tightening operation
- Once a value is programmed, tightening is controlled via an audible beep
starting at 50% of the target setting
- Wrench is protected from torque overload
|
|
Feed units and systems
Vibration helical conveyor
- Universal use for small parts and connecting elements of all types
- Readiness and Conveying
- Sorting and Buffering
- Escapement and Merging
- Monitoring and Controlling
|
|
ESE
Electrical hand screwdrivers without feeding
- Manageable screwdriver for small screws and simple screwdriving application
- Powerful DC power drives
- Precise shut-off
- Continuously adjustable torque
- Quiet in operation
- Economical
- Maintenance-free
|
|
For a faster productive process: this is the new feeding system NCA, completely designed by Fiam.
The tightening system NCA is particularly suitable for large and mediumbatch of equal screws; it offers the following important benefits:
- the screw is automatically sent from the bowl to the screwdriver head;
- the screw is automatically positioned on the workpiece at the same time as the screwdriver is operating.
The work cycle is simple, fast and safe:
- the screws are loaded in the bowl
- the screwdriver is operated
- the screw automatically arrives at the screwdriver head
- the screw is drawn in
- another screw arrives at the screwdriver head, is drawn in and sothe cycle continues
|
|
The improvement of productivity, quality and customization along with a close customer association, has been the driving force in the development of the CP screwfeeder range.
Cost effective solution
- Our screwfeeder range is an assembly of modular parts
- Each part of the assembly is a standard module
- Each module is easy to change thus provides a flexible solution
Servicing
- Simple procedure to order via the CP Application Center
- All module parts in stock
- Easy to install: no special tools required
- Mechanical assembly components fully designed with 3D CAD system (proe, step or iges format) based also on your 3D specifications.
|
|
For collated screws type MGS from 25 - 55 mm( 1" -2-1/4")
plasterboard, chipboard, cases, sheet materials, packing,
flooring, pre-fabricated buildings, interior fixing, caravans, funiture manufacturing, etc.
TECHNICAL DETAILS
Weight:1,6 kg (3.52 lb.)
Height: 180 mm (7.087 in.)
Length:420 mm (16.535in.)
Voltage: 220V / 50 Hz
Power: 480 W
No. of revolutions: 4650 RPM
|
|
|
|
|
|
DS300-S2
Capable of driving all SENCO® DuraSpin screws from 1-5/8" - 3" in length, this tool is ideal for wood screw applications. The SENCO DuraSpin™ DS300-S2 collated screw system comes conveniently assembled to a rugged 2,500 rpm SENCO screwdriver. The DS300-S2 comes complete with the DuraSpin collated screw feed system mounted on a screwdriver, a flooring extension, a rugged carrying case, and two spare bits.
Features:
Patented SENCO DuraSpin feed system drives screws quickly and efficiently without jams or misfeeds.
Ergonomic design - May be used with a one-handed or two-handed grip. Cushioned second hand grip provides added comfort and reduced exertion.
Flooring extension included - Allows screws to be driven efficiently from a comfortable standing position.
Easy Depth-of-Drive Adjustment - Just turn the thumb screw to regulate the precise amount of countersink.
Quick Release - Feed system snaps off to give easy bit access.
Adjustable Nose Piece - Easily adjusts tool for screw sizes from 1-5/8" - 3" (41 mm - 75 mm).
Super-Tough Drive Bits - Outlasts the competition.
SENCO's Full One-Year Warranty.
Modular design - Snaps together with or without flooring extension, quickly and easily, with no tools.
|
|
Cordless Auto Feed Screwdriver
BFR440
Fast Charger, Battery Cartridge, Philips bit
FEATURES
- Quick Shooting
- Rotational speed has been drastically increased up to 4,000rpm from 2,000rpm of our predecessor model 6835D, ensuring smooth screwdriving and high operation efficiency.
|
|
HSP Handheld Screwdriver
with automatic feed system for screws and headless pins
- Compact and ergonomic design
- Automatic bit stroke
- Short changeover times
- Maximum flexibility
|
|
Yokota impulse wrenches are widely used for tightening jobs in the assembly industry, where accurate torque tolerances are necessary. Impulse tools are light, powerful, small and very importantly, have no kick-back. The Yokota range of impulse tools is increasing fast, starting at 6Nm to tighten small joints, and goes up to 600Nm. Evaluation of tightening processes in car assembly shows that tightening joints uses 10% of the total assembly time. Working with faster tools therefore can speed up
assembly lines substantially.
|
|
Ingersoll Rand pulse tools meet the new demands of assembly operations with high speed rundown of fasteners, exceptional accuracy and consistency in torque delivery, and operator-oriented design. A unique hydraulic impulse mechanism - driven by an air motor - applies torque to fasteners with a degree of control not possible in conventional tools. The result is precision fastening, with virtually no over-torquing in critical applications. Plus, tool users benefit from the added pluses of reduced transmission of torque reaction and vibration, as well as improved balance and quiet operation.
Ingersoll Rand offers standard, shut-off, and transducerized pulse tools to meet specific application requirements for accuracy and operator preference with broad torque coverage of 4 to 290 Nm.
|
|
Features and Benefits:
Bolttech's HydraLinks convertible bolting tools offer the global market the first and only 4-in-1 industrial bolting tool system. The HydraLinks tools are lightweight, compact, and versatile to allow the operator ease of use on most applications with greater efficiency. HydraLinks offers a hydraulic cylinder that comes standard with a multi-swivel feature and is available in five graduated torque ranges offering the broadest range of torque and hex link combinations in the industry.
Additional Features & Benefits:
- Multiple-Link-Connection Cylinder
- Mutli-Swivel 360° x 360° Rotataions
- Accuracy Assurance Pawl
- Factory Calibration
- Multi-Indexable Cylinders
- 12-Point Reaction Bar
- Aluminum Bronze Drive Bearings
- Aluminum Bronze Piston Rod Bushings
- Modular - Innovative Design for Ease of Operator Use
|
|
No tools are needed for changing the heads
Innovative, pinless wrench construction incorporates quick
release cylinder and automatic crank engagement
Cylinders and low profile heads have been engineered to give
ultra slim, compact low clearance tooling with a small nose
radius
Robust design with minimal parts enables easy on-site
maintenance without special tools
Nut sizes covered range from 17/16 - 45/8 inch AF (36 – 115 mm)
Optimized strength-to-weight ratio
Fast operation due to the large nut rotation per wrench cycle
(30 degree rotation angle) and rapid return stroke
|
|
Double Acting Cylinder
360° x 180° Swivel hose connection to reduce hose whip lashing & easy usage at restricted areas
Special high strenth, ultra-light Aluminium alloy material for strength & light weight
360° adjustable reaction arm with trigger style lock for easy adjustment
Compact unibody design with one way ratchet mechanism
Minimum moving parts for durability & low maintenance
External ratchet freeing mechanism
Working pressure of 700 bars
Accuracy ± 3%
|
|
Extra light, small and handy, the LÖSOMAT high torque hydraulic wrench works powerfully at up to 27.000 Nm. It carries out its work reliably in the tightest of spaces. The smallest hydraulic wrench in the world, LDH-12V, is part of this series.
Main application areas:
Steel construction, power plants, mining, transport industry, chemical industry and refineries, mechanical and construction engineering, oil and gas industry
|
|
|
|
|
|
Power Team unleashes the ALL NEW PredatorTM Series, a premium line of high performance steel torque wrenches.
Low Clearance Torque Wrench
Square Drive Torque Wrench
Power Team® introduces Predator Series - its newest line of high performance tools serving the global bolting industry. This family of high performance hydraulic products raises performance and reliability to a new level.
After decades of serving the high force torque wrench tool industry, the Power Team portfolio of products and systems is expanding to include a new series of durable steel square drive and low clearance hydraulic torque wrenches.
This new generation torque wrench features more efficient and faster operation in an envelope size that is 2/3rds the size of aluminum wrenches, allowing the tool to be used in applications where space is limited, yet is still comparable in weight.
The Predator range of wrenches offers a reliable performance based solution to your challenging bolting needs. We look forward to introducing the Predator family of wrenches and accessories to your application. Contact us for more information.
Future generations of Predator will include electric, air and gas powered high-performance hydraulic pumps.
Faster - Quieter- More Powerful . . . Predator by Power Team.
|
|
|
|
|
|
A TorcUP Hydraulic Torque Wrench is a tool designed to exert torque on a fastener to achieve proper tightening or loosening through use of hydraulics. A torque wrench is applied to the nut either directly or in conjunction with an impact socket. Hydraulic torque wrenches directly apply a predetermined, controlled amount of torque to a properly lubricated fastener, eliminating the guess work necessary with stud tensioning and turn of the nut methods of bolting. Hydraulic torque wrenches also dramatically increase worker safety and efficiency.
TorcUP Inc. TU Series Features
*Patented Mono-Body Housing
This feature allows for direct reaction against the housing of the tool, as well as significant reduction in housing flex and torsion.
*Dual Independent Swivels
360 degree by 360 degree swivels allow for individual movement of duplex hoses. Steel construction adds durability.
*Push Through Square Drive
Change the direction of the tool from loosen to tighten by pushing the Vascomax square drive through the tool.
*Laser Engraved Torque Chart
The torque chart for the square drive tool is laser engraved directly on the shroud to allow for quick reference. It also reverses from Ft/lbs- PSI to Nm-Bar.
*Quick Connect Couplers
*Body Material
The TU Series housing is manufactured from 7075 Aircraft Quality lightweight alloy.
*U.S. Patent No. 6,068,068
|
|
HYTORC’s latest Bolting Machine, the AVANTI™ - A Winner in the 2003 Plant Engineering Product of the Year Awards competition as an Innovative Maintenance Product, is not just the most user-friendly, but is the most universal bolting tool. Convertible for regular-, medium- and highly critical jobs, from torque to tension, from an unprecedented torque-accuracy to an unprecedented bolt load-accuracy.
We invented every major improvement in Hydraulic Torque Tools in the last 25 years, to give you the latest Technological Product which handles any job you have and any one you might come across, safely!
We give you lightweight, speed, reliability and precision in a user-friendly way. We provide the accessory to make your HYTORC the most universal tool money can buy.
|
|
|
Hi-force TWS-N series lightweight aluminium hydraulic torque are designed to handle the tughest bolting jobs accurately and quickly. All modelsn provide a torque accuracy of +/-3% with a handy torque chart clearly angraved on the tool.
|
|
|
|
|
|
TX Series Low Profile Hydraulic Torque Wrenches are designed for installing and removing large bolts having minimal wrench clearance at offshore platforms, power plants, steel erection sites and other locations requiring precise high torque during bolt makeup and maximum torque for bolt break out.
*Patented "Peanut-Shaped Piston"
This feature allows for the cylinder and ratchet link to be
the same width. Friction reducing sliders prevent wear
on the piston.
*Dual Independent Swivels
360 degrees x 360 degrees swivels allow for individual movement
of duplex hoses. Steel construction adds durability.
*Hex Link Cassettes
Steel alignment pins connect lower reaction area
for added strength.
*Quick Connect Couplers
Each tool is fitted with quick connect, no-drip,
thread less safety couplers, with 4:1 safety ratio.
*Cylinder and Link Material
Both cylinder and link are manufactured from
4340 Aircraft high strength steel alloy.
*Nose Radius
Tight nose radius allows this tool to fit applications
where clearance constraints make other tools too bulky.
|
|
HYTORC’s latest Bolting Machine, the AVANTI™ - A Winner in the 2003 Plant Engineering Product of the Year Awards competition as an Innovative Maintenance Product, is not just the most user-friendly, but is the most universal bolting tool. Convertible for regular-, medium- and highly critical jobs, from torque to tension, from an unprecedented torque-accuracy to an unprecedented bolt load-accuracy.
We invented every major improvement in Hydraulic Torque Tools in the last 25 years, to give you the latest Technological Product which handles any job you have and any one you might come across, safely!
We give you lightweight, speed, reliability and precision in a user-friendly way. We provide the accessory to make your HYTORC the most universal tool money can buy.
|
|
|
|
Screwing tools
