|
|
| Products 91 to 120 of 187 |
Yokota ratchet wrenches are used where accurate torque is required while the accessibility is limited.
Choose the right size impact socket for your ratchet wrench. If the sockets do not fit exactly this may cause a loss of power and wear of the anvil. For
detailed information about the impact sockets we refer to the special chapter Action impact sockets. Extension bars, universal joints and adaptors are also available.
|
|
CP produce a range of angle screwdrivers to enable fastening for restricted access applications.
Angle head direct drive
The angle head direct drive range with torque setting by air admission is one of the more accurate tools for soft joints. Their specific design is greatly appreciated in tight areas.
|
|
JUNIOR RATCHET3/8"
high handiness for all screwing works
compact head offering a bigger flexibility in restricted places.
easy-to-reach reversing switch
sturdy gears for a longer durability
maxi torque: 67Nm
no-load speed: 160 revs
air consumption: 180L/minute
using advised pressure: 6.2 bars
threaded admission: 1/4"
L(mm) 227
|
|
|
Get it together fast and accurately with Atlas Copco pneumatic screwdrivers. For industrial assembly operations, accurate fastening and productivity go hand in hand. Atlas Copco pneumatic screwdrivers will bring quality and productivity in to the assembly process. The clutch controlled screwdrivers are designed for optimum productivity and quality, with accurate and consistent torque control that will reduce quality problems and minimize production line down time. The screwdrivers are ergonomically designed- they are light and comfortable to hold, with fast clutch release, ergonomic design and soft warm grips prevents operator strain.
|
|
The Cleco family of pneumatic tools is one of the most
diverse in the portable tool industry. With a broad
selection of clutches and motors, this line of tools covers
a wide range of torque at several speeds. Coupled with a
diverse line of attachments and throttles, these tools are
suitable for an indefinite number of applications.
|
|
The LÖSOMAT high torque pneumatic wrench works quietly and is robust, with its rotary drive motor. An air control unit supplies constant air pressure.
Main application areas:
Power plants, transport industry, chemical industry, plastics industry, cable cars and lifts, mining, tunnel construction, shipyards, oil and gas industry and cement industry
|
|
|
|
|
|
Screwdrivers are available with various impact mechanisms. Each application has it’s own mechanism. Therefore please take note of the
information below before purchasing a tool.
1-Hammer
The 1-hammer system makes 1 impact per rotation at 1 side of the anvil. This causes a higher energy per blow. The screwdrivers with the 1-hammer system are especially suitable for wood and steel screws.
2-Hammer
The 2-hammer system makes 2 impacts per rotation at both sides of the anvil. This mechanism is used for wood and steel screws and works more quiet than the 1-hammer system.
Direct drive
These direct drive screwdrivers are suitable for selftapping screws and wood screws.
Clutch mechanism
Screwdrivers with a clutch type mechanism are used for standard applications with normal joints. The mechanism works by means of
spring pressure. When reaching the torque the mechanism slips.
Shut-off mechanism
To comply with the ever increasing demands for screwdriving accuracy and work safety, we present a new range of pneumatic screwdrivers with a maximum torque repeatability. Along with the exceptional torque accuracy, the new Jointech Plus 2 torque control system has automatic high speed air shut off to allow for a considerable reduction of the reaction to the operator's hand.
|
|
On-Pin - Pneumatic Screwdrivers
We can offer a variety of different models of hand-held pneumatic screwdrivers covering most torque ranges.
Available as hand-held or pistol grip the On-Pin range is manufactured in a ergonomically sturdy light weight design.
Automatic shut-off when torque is achieved
Push-start design
Quick chuck for easy changeover of driver bits
Low noise & air consumption
|
|
CP Industrial screwdrivers:
These tools are suitable for high production rates such as those on production/ assembly lines, where high durability is required and the tools are used frequently. Our industrial tools combine the best of quality, durability and ergonomics for your most demanding applications.
CP RediPower screwdrivers:
RediPower tools are suitable where the tool is used intermittently for industrial maintenance or non-intensive production.
|
|
The large variety of our handheld Screwdrivers, offered in many different design series, provides an ideal coverage of most torque ranges.
The simple and compact air motor makes the tool lightweight and easy to operate.
Our tried and tested MICROMAT™/MINIMAT™-clutch, is the basis for an extreme high repeatability. We guarantee the user-friendliness and an unmatched lifespan, due to the constructive design, which is specialized for operation in a harsh industrial environment and because of our quality-assured production.
|
|
|
|
|
|
Joining components in today's industrial environment is much more than putting wrench to bolt. It's about finding a solution that links the operator and the joint and delivers unparalleled accuracy and repeatability. Ingersoll Rand has a superior knowledge of the threaded fastening process, acquired through years of application work with the world's leading manufacturers in the motor vehicle, aerospace, appliance, and electronics industries. We understand the interface of the tool and operator - and know how to leverage the power of ergonomically-designed equipment to maximize productivity.
Beyond just product, Ingersoll Rand's extensive capabilities help you before, during, and after your line or work area is configured for production. Presented here is Ingersoll Rand's portfolio of products and services specifically tailored to the modern assembly environment. Whether your business is assembling motor vehicles, automotive components, aircraft systems, appliances, office furniture, or consumer electronics, there is solution from Ingersoll Rand that will meet your needs and exceed your expectations.
|
|
Reversible screwdriver
V.620RF
Technical caracteristics
- Free speed : 1,800 rpm.
- Recommended working torque : 13 N.m.
- Average air consumption : 110 l/min.
- Air inlet thread : 1/4".
- Working pressure : 6.2 bar.
- Screw size : M4.
|
|
Features and Benefits:
- Combines the power of impact and hand torque wrenches in one tool.
- Multiplier increases speed and productivity, as well as accuracy.
- Interchangeable multiplier sets: 800, 1800, 3000 and 4500 ft/lbs.
|
|
PNEUMATIC TORQUE WRENCHES
Square drive ¾ Inch to 1-1/2 Inch, Adjustable torque range from 165Nm to 11200Nm, 120lb.ft. to 8260lb.ft., input air pressure 2 to 7bar, with heavy duty planetary gear box, with reverse-forward drive for loosening and tightening, having idle speed from 1 to 48 rpm, suitable for use in highly explosion risk areas.
|
|
Norbar manufacture an extensive range of high quality torque wrenches to cover torque values from 1 N.m to 1500 N.m. They are designed and manufactured to exceed international standards for accuracy.
In addition to the normal 'adjustable' torque wrenches, Norbar offer Production 'P' Type versions which can be pre-set and dedicated to a particular application. This setting system is designed to discourage unauthorised alteration.
All Norbar torque wrenches are offered as standard with a quality ratchet. For applications where interchangeable end fittings are required, 'Torque Handles' are also available in various models up to 550 N.m.
|
|
|
|
|
|
TorcUP Industrial Bolting Tools introduces the RAPTOR Series on industrial pneumatic torque wrenches. The new line provides continous and repeatable torque with an accuracy of +/- 5%. Unlike previous pneumatic torque wrenches, the RAPTOR series has the fastest speed when it counts, which is during actual torque and not during free nut run down! Inherent in all RAPTOR models is a Patented gear technology which creates greater durability, lower operational temperatures and increase efficiency. The RAPTOR series ranges in torque from 120 Ft/Lbs to 3,000Ft/Lbs and Free Speeds of up to 45 RPM.
The RAPTOR is a tool designed to exert torque on a fastener to achieve proper tightening or loosening of a connection through the use of pneumatics. A torque wrench is applied to the nut either directly or in conjunction with an impact socket. Pneumatic torque wrenches apply a predetermined, controlled amount of torque to a properly lubricated fastener.
TorcUP Inc. Raptor Series Features
*Square Drive
Direct Socket Engagement.
Available in 3/4", 1" or 1 1/12" Square Drives.
* Pistol Grip Control
Firm Pistol Grip Control.
*Reaction Member
Sturdy "Non-Welded" Construction.
*Air Drive
Constant Speed Rotation.
*Internal Gear Drive
Patented Planetary Design.
*Operation Trigger
Feather Controlled Forward/Reverse.
|
|
Hytoric XXI
Stud tebsioning should be fast, hands-offn, precise and at decent pressures.
The 10,000 psi, 700bar XXI incorporates the latest Technology in bolting tools, Continous Rtotation.
|
|
|
the SP & PT pneumatic torque multiplier range offers a choice of 10 models, suitable for almost every bolting application and are sullied with an airline pressure and lubrification control unit. Maximum torque outpût capacities range from 680 to 47000Nm with a choice af square drives from 3/4 tu 2/1/2,
|
|
QA 4 / QA 6 / QA 8
Precision Air Nutrunners
High precision shut off clutch
for consistent repeatability and process quality
Adjustable shutoff clutch provides repeatability that improves joint quality
Quick, precise clutch shutoff limits torque scatter and reaction to the operator
ISO 5393 tested
Cycle counting capability enables integration into process control systems for QA4 and Remote tools.
Clutch tested to over 1 million cycles without failure
Proven components from our world-class line of DC electric tools
2 Year Warranty on clutch and angle heads
Three powerful motor options to match your torque and speed requirements
Adjustable Shutoff Clutch or Stall
Multiple drive sizes, spindle lengths, and floats
Single or Multi-spindle fixtured systems to increase productivity and improve joint quality
Run with Lube or Lube free
|
|
|
|
|
|
The ErgoPulse principle
The heart of a pulse tool is the hydraulic pulse unit, positioned between the air motor and the outgoing shaft. Since the pulses are very short, there is almost no reaction force in thehandle, only the much lower motor torque is transferred to the operator’s hand. The pulse unit increases the torque generated by the motor 50-100 times. As there is no metal-to-metal impact in a pulse tool, pulse tools provide a softer, more controlled pulse with considerably less vibrations and noise than an impact wrench. Together with good balance and low weight the result is a tool that
is extremely comfortable to operate. The reliability and accuracy of the ErgoPulse
tools make them ideal for many situations.
A complete range
The ErgoPulse range covers torque from 2-900 Nm and are available in both shut-off and non shut-off versions. The shut-off pulse tools – PT, PTS and PTX
types – will shut-off the air supply as soon as the pre-set torque has been reached.
With a shut-off tool the operator influence is minimized. The result is increased accuracy and faster tightening. The non shut-off tools – C and XS types – produce
pulses until the operator releases the trigger. They are preferred in applications
where it is an advantage for the operator to be able to control the process
by shutting off the tool manually. Atlas Copco pulse tools are available
in straight and pistol grip versions.
Probably the most powerful pulse tool in the world
The newest addition to our PTX is the EP 25 PTX , which builds up torques between 450-900 Nm extremely fast and only weighs about 10 kilogram.
|
|
ADJUSTABLE “CLICK TYPE” TORQUE WRENCHES
Ratcheting and Non Ratcheting head models with torque range from 2 - 2000 Ft. Lbs., 0.3 - 275 Kgf. mts. and 3 - 2700 Nm. Repair and Re-calibration Facilities available;
|
|
Torque Tools
Dial Torque Wrenches
Electronic Torque Meter
Micrometer Torque Wrenches
Torque Multipliers
Torque Accessories
3/4" Drive 60-300 Foot Pound Ratchet Head Micrometer Torque Wrench
(J6018AB )
Length 32"
Weight 14 lbs
Drive Size 3/4"
Head Depth 2-1/16"
Head Length 2-5/8"
Increments (ft/lb) 2 ft. lb.
Torque Range (ft/lb) 60 - 300
45 tooth gear/floating pawl design for small 6.8"arc swing
13% smaller head for access in tight work areas
Reversing lever designed for quick, one handed operation
10-80 ft/lb thru 140-700 ft/lb
21-116 Nm thru 217-976 Nm
Packaged in blow molded plastic box for protection and easy storage
Calibrated ~2% one direction available upon request
|
|
Cleco offers over 500 nutrunners, most of which
can be equipped with a wide variety of drive
options. This generates over 3,000 different
nutrunner combinations, allowing the exact tool
with precise features to be chosen for specific
job applications.
The following items should be considered before
selecting the tool: ergonomic factors associated
with the man/tool/task relationship, torque and
speed requirements, tool and fastener
accessibility, fastener joint variations, operator
skill level and air supply.
Tool performance can be affected by air supply.
Plant air line pressure to the tool will vary widely
due to several factors: distance of tool from
compressor; size of transmission lines, air drops,
manifolds, hose length and diameter, and
fittings. All power tool specifications are based
on the tool receiving air at 90 p.s.i.g. (6.2 bar)
with adequate air flow volume while the tool is
running.
|
|
Our bit exceed DIN / ISO standard, it is good to use in industrial area. Our brand is GFB. The packing can be card packing, bulk packing and your design. Special bits are very well come, please supply your samples or drawing.
Features:
. Good quality, exceed DIN / ISO standard.
. Our registered brand GFB.
. Accept all special bit holder, nutsetter and screwdriver bits.
. Welcome sample purchase.
|
|
GFB Bits exceed DIN standard
NOVUMTEC is specifically making high quality wide range bits and accessories for all kind of ScrewDrivers, Power tools, Machines, Tools.
"GFB" bits at Taiwan price, meet DIN Standard, match any screw heads perfectly is long life bits.
Torx is wide use in many areas since the torque is higher than ordinany type
We can make screw driver bit from T1 to T100 for industry use
different shank are acceptable
Our brand is GFB
|
|
Quality intensive-use color-ringed driver bits
POZIDRIV BAGUE : 25 ou 50mm
PHILLIPS BAGUE :25 ou 50mm
TORX BAGUE :25 ou 50mm
TORX PERCE BAGUE :25 mm
NEW : 30 pc color-ringed driver bits (plastic case)
Pozidriv, phillips, plat, 6 pans, torx, torx percé
|
|
|
|
|
|
Wiha DuraBit
- The DURA bit – for an extremely long tool life and a secure fit in the screw; ideal for working with delicate surfaces
- Hard and wear-resistant, tungsten-carbide micro-particles in the bit tip gain a secure grip of the screw head, thus reducing the slipping of the bit from the screw and not only preventing damage to the surface but also ensuring optimum force transfer
- Corrosion resistance over a particularly long length of time thanks to nickel coating
Wiha Diamond bit
- The diamond bit for lower force application and quick work; particularly suited to industrial applications and production
- Finest and wear-resistant sapphire and diamond micro-particles grip in the bit tip and transfer the force straight from the hand to the screw
- Nickel coating of the entire bit for extra-long corrosion resistance
Wiha TiN Torsion bit
- The TiN bit for trade and industry; particularly suitable for frequent screw applications
- Best tool lives and service life thanks to very hard titanium-nitride coating (TiN)
- Combines the advantages of HOT and ZOT bits in a single bit
|
|
Lock your bits firmly
Our holder is precision made that is meet DIN standard non Magnetic or strong magnetic. Your design are very welcome, we have very strong developing department price competitive.
Features:
. Precision made.
. Strong magnetic.
. Sample purchase.
|
|
The Ideal Hydraulic Tension Tool has continuous Rotation!
The Ideal Hydraulic Tension Machine is HYTORC-XXI®!
Stud-tensioning should be fast, hands-off, precise and at decent pressures. The 10,000 psi, 700 bar XXI incorporates the Latest Technology in Bolting tools, - Continuous Rotation. By use of the HYTORC or the HYTORC CLAMP
Accessory, the XXI reinvented Industrial Bolting providing for the first time an unprecedented Bolt Load precision and Reliability at an unprecedented Speed and Safety.
Continuous Rotation
Anti Backlash Design
360 degree Uni-swivel
Simultorc-switch*
New Ergonomic Design
3 times faster than prior art
360 degree Job-adjustable
300,000 psi Alloy-mechanism
Torsion-free internal Mechanism
Upgradeable for Stretch-to-load!
|
|
|
|