|
|
| Products 151 to 180 of 203 |
To produce a perfect weld seam, the welding shoe must match the specific weld geometry.
In addition to the welding shoes listed below MUNSCH supplies customized welding shoe designs for special applications and weld geometries.
|
|
This tent has a width of 1.900 mm, a depth of 2.000 mm, a height of 2.000 mm at the sides and 2.200 mm in the middle. The cover is made from a white PVC fabric and is self-extinguishing according to the French standard M2. The weight of the fabric is 630 gram per square meter. The tent can be closed on the front and the back. The tent is fitted with 200 mm wide ground flaps all around. A frame from galvanized tube Ø 25 mm is included with the tent.
All advantages :
PVC fabric of 630 gram/m², self-extinguishing according to the M2 standard.
The frame is made from strong galvanized tubes, Ø 25 mm, which guarantees a long life span.
The height in the middle is 2.200 mm, that makes the tent also suitable for longer persons.
The tent is fitted with 200 mm wide ground flaps.
|
|
Magnum 100L
K530-3 Magnum 100L FCAW Gun 10 ft 035-045
Extremely small, lightweight gun that's great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications. Standard equipment on current Lincoln SP-135T, SP-135 Plus, SP-175T and SP-175 Plus compact MIG welders. Includes gun connector.
|
|
HW-9
The HW-9 140-amp torch features a compact design for use in confined areas. Its hard-body design provides superior heat and abrasion resistance for long life. Flexible head models provide added versatility.
HW-17
The HW-17 150-amp torch features quick electrode release and a hard-body design that provides superior heat and abrasion resistance for long life. Flexible head models provide added versatility.
HW-24
The HW-24 80-amp torch is designed to reach into tight places and is ideal for use in confined, cramped areas.
HW-26
The HW-26 220-amp torch features quick electrode release and a hard-body design that provides superior heat and abrasion resistance for long life. Flexible head models provide added versatility.
|
|
|
Brouwer Metaal is specialised in the production of welding wheels. Welding wheels can be produced in severial ways but the method of seperate forging and machining them to drawings is the best method. In this way the wheels has a homogeneous copper structure which will improved the life time considerably. We can produce there wheels out of several copper alloys like CuCrZr, CuCo2Be, CuNiCrSi and CuBe2.
|
|
MIG, TIG and SA welding wire,TüV and Db approved. Precision layer wound . Use in electrical , chemical , medical end food industry as well as in important high technological sectors like aviation, automotive and engineering .
Technical info
Diameters from 0.80 till 4.00 mm on spools, reels or lengths .
Different alloys able to weld austinic CrNi as well as ferritic steels .
|
|
|
|
|
|
-Combined Welding- and Cutting Torches
hand grip for normal hoses
welding attachment in 9 sizes from 0,2 to 25mm welding range
tubular welding attachment in 4 sizes from 1 to 9mm welding range
more-flame-attachment in 4 sizes from 4,0 to 19mm heating range
cutting attachment with concentric nozzles and wing or lever operation for
cutting oxygen valve and cutting ranges from 3 to 300mm
a hole cutting torch from 3 to 50mm cutting range
and sets (assortments) of different compositions in a steel storage case.
-Soldering torches – air inlet by torch insert
The programme contains different hand grips, welding torches, welding heads with extension tubes and different compositions - sets – as well as soldering irons.
Sets are assortments of various hand grips and inserts for different applications like soldering, brazing etc.
-Propane - Oxygen
Set for heating
Heating torches
Cutting torches
Cutting torches with concentric nozzles
-Propane/Accessories
Pressure regulators for propane
Small-Propane-gas bottles
Double hose
Distributors
Pressure propane hoses
Detachable hose tails
-Pressure Regulators for bottled gases DIN EN ISO 2503
Single-stage pressure regulators
Two-stage pressure regulators
Pressure regulators with volume meter Single- and two-stage
|
|
The Koike Aronson IK series features a high speed tracing system that is capable of following a pattern at speeds of up 120 IPM. The IK series of machines support oxy/fuel and plasma cutting processes; the maximum tool load on the machine is two tools.
The IK series of machines utilize the HL-83A coordinate drive tracing system with speed ranges from 4 to 160 IPM. Options available on this machine include CNC controls, plasma systems, and cutting tables.
MACHINE FEATURES
Available cutting widths: 4', 5' and 8'
Available cutting lengths 10 and 20 feet
Versatile cutting for large and small applications
|
|
The Wire Booster assists the wire feeding between the pail pack and the wire-feeding unit of a robot welding system or a manual power source.The driving rollers of the Wire Booster are separated from the running motor through a magnetic clutch. The wire is fed by the magnetic clutch, as soon as the main drive of the robot employs force on the wire. Through this functional principle the Wire Booster does not necessarily have to be connected or synchronised with the main drive.Wire feeding problems can now be solved fast and without any unnecessary installation.
For detailed information please visit our homepage.
|
|
|
in order to obtain the best result when braze welding with weld material, sinergo has developed digital-control tools wich can automatically apply soft or silver solder. These devices allow you to shorten working time, assuring always a high, checkable and repeatable quality.
|
|
|
Smooth wire feed is critical to many welding applications. ESAB meets the need with ready-to-weld feeder packages featuring the latest technology for easy functionality and dependable operation.
|
|
| ... products without technical information |
| |
|
|