|
|
|
|
|
|
Saf-Fro proposes a new range of welding equipments to the coated electrode: PRESTO PFC. Inverters arc with D.C. current, these stations are designed to be used under all the conditions: more current with most extreme. Offering a great robustness and a ratio duty raised, they make it possible to weld until 180A onto a simple catch domesticates while reducing electricity consumption. Range PRESTO PFC respects the limitation of the harmonics (standard IN 61000-3-12).
Performances
- Intensity of welding up to 180 has for model PRESTO 180 PFC
- Compatibility with the generators thanks to controller PFC
- Long primary education cables (70 m - section of 2,5 mm2)
- Starting, Hot Start, Anti-joining Excel
- Welding of all types of electrodes (except cellulose)
A reduced consumption
- Functions on a catch domesticates (fusible of 16 A)
- All the models have a standard catch
A better ergonomics
- Reduction of the noise: "intelligent ventilator"
- Arch... to facilitate lifting
- Arch... to roll up the cables of welding
- Reduced Weight: 6,6 kg only
- A compact design
|
|
|
To achieve maximum welding rate and minimal labor cost, 6100 Automatic Welding Systems integrate a combination of standard Weldlogic products to provide a complete package. Specifically designed for precision automatic welding, 6100 systems allow circumferential, longitudinal and spot welds to be easily made with a minimum of operator skill. All components are fully intergrated to create a complete "ready-to-go" automatic welding station.
|
|
K1297 AC/DC 225/125
The AC/DC 225/125 is the deluxe version of the world renowned AC-225 arc welder. It uses the same traditional design of the AC-225, but adds the smoother, more stable DC welding arc. Ideal for farm, shop, and home use where improved arc welding performance is desired.
The AC/DC 225/125 is an arc welding power source with an AC welding output range of 40-225 amps and a DC welding output range of 30-125 amps. It is an extremely useful stick welding power source for maintenance repair, fabrication, construction, erecting and hardfacing applications. Also for cutting and piercing holes in steel.
|
|
Quick. Controlled. Quality.
With full digital technology the GB2-350 offers improved stable arc starts and reduced spatter generation. More uniformed balls at the end of the welding wire make for highly repeatable welds and quick, more predictable starts every time.
Digital technology also means bettering the wire feeder. Wire feed speed can be maintained even if input voltage fluctuates.
Additionally, the GB2 delivers quality welds across several material types. It excels in maintaining stable arc control at low voltages - excellent for your thin gauge welding applications. And high performed welding data means improved stainless steel applications as well.
|
|
Designed specifically for the insulation industry
The Pin Welders robust and reliable design has performed efficiently and reliably for many years under the stress of on-site and workshop conditions.
The unique chuck guard design has the following advantages:
1. No adjustment necessary for different length pins.
2. Protects chuck from zinc splashing during welding, therefore increasing the life of the chuck.
3. Because of the self-tightening effect between the chuck and the chuck guard, arcing between the chuck and the pin is eliminated therefore guaranteeing more consistent welding results
|
|
|
Unitek Peco's Dual Pulse Series is a full range of Capacitive Discharge (CD) power supplies for precision resistance welding applications. Their unique "Dual Pulse" function overcomes process variables; part and electrode surface inconsistencies contribute to poor welds. Plating irregularities or contaminants, including oxides and oils, affect weld reliability. The “Dual Pulse” function virtually eliminates these problematic variables.
|
|
|
|
|
|
Advanced Capacitive Discharge Welders (patent pending)
Features:
- Dual pulse function
- Built-in peak current monitor
- Process monitor
- Set test pulse and pulse limits
- Upslope function
- Polarity Programming by pulse
- Four selectable pulse widths
- High resolution 6.5" color display
The new range of Advanced Dual Pulse CD welders were developed to provide a new level of welding performance, process monitoring and user interface.
The 100ADP replaces the 125DP, the 300ADP replaces the 250DP and 250DPS, and the 1000ADP replaces the 500DP, 500HV and 875DP units.
The all new design that includes a proprietary charging unit improves pulse rise times and repetition rates. The monitoring capability with color coordinated display provide at a glance information of weld and process performance.
Unique features such as programmable pulse polarity and uplsope provide easy setup for even nugget formation and electrode wear in series welding, and a means to alleviate weld splash.
The ADP welders are particularly suited for applications such as battery welding.
|
|
Automig is a complete range of mobile, stepregula-ted MIG/MAG welding machines for professional sheet-metal welding.Rally MIG 160, the smallest "member of the family" (without spot and interval facilities and with four adjustment steps), is only available as a mono-phase machine. The other Automig machines with respective maximum out-puts of 180, 200 and 250 A, are available as both mono-phase and three-phase machines.
From 230 to 400 V
The operating range of the machines is reflected in the fact that several of the Automigs are switchable from 230 to 400 V, have many adjustment steps, spot and interval facilities, four-stroke and the possibility of adjustment of wire-feed speed from the torch handle.
All the varieties of Automig have excellent welding properties in the dip-transfer area using either CO2 or mixed gas. Automig is available with an outlet for electric tools and a wide range of accessories for body work.
|
|
KR2
Cable-less remote controller increases mobility and reduce disconnection trouble.
Condition setting is easy even for an unexperienced operator.
* Low spatter and high arc stability
* Power saving by the adoption of new idle power saving circuit
* Compact and space saving
* Safety structure applied IP23
|
|
Shows its muscle welding thin sheets of mild steel, stainless steel, and aluminium.
Designed for ease of use when welding mild steel and stainless steel.
Power compact 200ETC
Inverter super auto
200A2, 350CA2, 500CA2, 500CAD
200CS2, 350S2, 500CS2
|
|
* Easily programmed
* Weld parameter monitoring
* Automatic self-compensation
* PC data interchange
* 63 weld schedules per outlet
* Closed loop control and feedback
* Alert and fault output displays
* Self diagnostics
* Robotic, fixed automation and manual systems available
|
|
|
FEATURES: Plug in solid state circuitry. Continuous current control from 250 to 900 amps. Continuous time control from .05 to .7 seconds. Built in chuck saver. System comes complete with 8 meters earth cable and clamp, 15 meters weld and control cable and stud welding gun with legs and foot piece.
|
|
|
|
|
|
TIGMATE™
The TIGMATE™ is a complete AC/DC, TIG and Stick welding package. All you need is a bottle of argon shielding gas or your choice of Stick electrodes and you're ready to start welding.
In the TIG mode, the TIGMATE™ offers superior performance: 18 gauge to 3/16 in. (1.2 to 4.8 mm) steel and stainless steel; 14 gauge to 3/16 in. (1.8 to 4.8 mm) aluminum. For thicker metals, take advantage of the Stick mode using 3/32 and 1/8 in. (2.4 and 3.2 mm) electrodes.
- Upgraded circuitry gives you finer TIG output adjustment with the remote foot or fingertip control. If you need more output while using the remote control, simply increase the setting of the front panel amperage control.
- AC output for superior aluminum welding, DC output for mild and stainless steel
- Four-position polarity and range selector switch offers two AC current ranges, DC electrode (-) for TIG, and DC electrode (+) for Stick
- Special arc starting circuitry eliminates high-frequency starts
- Built-in arc assist stabilizer for AC TIG on aluminum
- Built-in arc assist starter for DC TIG
- Process switch automatically sets machine for TIG or Stick
- Unique "flow-through" shielding gas TIG torch connection allows removal of torch without tools
- Preset automatic postflow timer protects tungsten tip, workpiece and torch
- Automatic high temperature shutdown
|
|
Based on the very latest IGBT inverter technology, TIG power sources with high frequency arc striking of the MATRIX series are equipped with an innovative digital panel for the complete control of all the welding parameters.
The excellent technical characteristics of these welding machines, coupled with the feature of digital control, allow high quality TIG welding, suitable for the toughest industrial applications and maintenance.
These highly advanced technology power sources are robust and user friendly: MATRIX HF’s, DC output only, enable TIG welding of mild and stainless steel, copper and its alloy.
MATRIX series power sources also offer excellent performance also in MMA welding with the most difficult basic and cellulosic electrodes.
|
|
|
|
|
|
The YD-350GB2 CO2/MAG inverter welding power source and the YW-35DD1YAD wire feeder with intelligent control box have been developed on Panasonic digital technology. It is 100% digital controlled and offers high quality welding and easy access to the IT world.
100% full digital control
• Exact output parameters
• Excellent welding results especially between 200A to 250A
• Sharp FTT - quick and smooth arc start
• Duty cycle: 350A / 60%
• Dimensions: 510 x 380 x 494 mm (L x W x H), weight: 38 kg
• Digital interface with Panasonic robots
• 400 V AC, 3 phases, 50 Hz
Wire feeder with intelligent control box YD-35DE1YAD
• Parameter setting through the intelligent control box
• Digital display for both programmed parameter and actual welding parameter
• Easy and logical parameter setting by LCD and jog dial
• Motor equipped with encoder provides digital feed back control of wire feeding
Quality control
• memory for 32 program
• Monitoring function for welding current, welding voltage, wire feeding speed etc.
• Easy transfer of programs to other 350 GB2 power sources
Customer benefits
• Less spatter, constant, high quality welding lowers production costs
• Reliable quality for low maintenance and service cost
• Easy parameter setting by jog dial
• Mobile compact size
|
|
|
|
|
|
The YC-300BZ3 DC inverter TIG welding power source has been developed on Panasonic digital technology. It is 100% digital controlled and offers high quality welding.
Technical Data:
100% full digital control high performance welding
• Exact output parameters
• Sharp and stable arc start as low as 4 amp.
• Welding Method:
1. DC TIG, DC pulse TIG for mild and stainless steel as well as titanium 0.3 – 6 mm, copper and brass 0.5 – 3 mm
2. DC TIG arc spot for mild and stainless steel with 2 x 2 mm thickness
3. DC stick for diameter 2 – 6 mm
• Duty cycle: 300A / 40%
• Weight: 36 kg
• Digital interface with Panasonic robots
• Arc drive function for stick welding
• Dimensions: 510 x 380 x 410 mm (L x W x H)
• 400 V AC, 3 phases, 50 / 60 Hz
Digital display, LCD, jog dial
• Digital display for both programmed parameter and actual welding parameter
• Easy and logical parameter setting by LCD and jog dial
Quality control
• 99 memory programs
• Digital connection with the PC / network for production
management and quality control
Customer Benefits:
• Sharp and stable arc start
• Reliable quality for low maintenance and service cost
• Easy parameter setting by jog dial
|
|
The YD-500AF2 is a MAG / Pulse MAG power source for automated welding with Panasonic welding robots.
• Input Voltage / Frequency: 400V / 50 Hz
• Input: 28 KVA
• Output current, adjustable range: 40 – 500 A
• Output Voltage, adjustable range: 12 – 45 V
• Duty cycle: 500 A / 100%
• Weight: 117 kg
• Dimensions (L x W x H): 585 x 440 x 945 mm
The YD-500AF2 welding power source can be used for welding of mild and stainless steel.
Following welding methods are possible: Standard/ Pulse, Hybrid, Hard + Soft Pulse
|
|
|
|
|
|
The YD-350GE2 MIG/MAG inverter pulse welding power source and the wire feeder YW-35DEB1YAD with intelligent remote control unit is based upon the latest generation of Panasonic digital technology. It has 100% digital controlled ensuring high quality welding and easy access to the IT world via PC based interface. It supports following welding methods: CO²/MAG, Pulse-MAG, MIG and Pulse-MIG.
Welding Power Source YD-350GE2YHD 100% full digital control
• Exact output parameters
• Suitable for aluminium, mild steel, stainless steel welding
• Quick and instantaneous arc starts
• High speed welding with less spatter with 32 bit technology
• Quick response to changes in arc length
• Duty cycle: 350A / 60%
• Sharp FTT - quick and smooth arc start
• Dimensions: 510 x 380 x 570 mm (L x W x H), weight: 66 kg
• Digital interface with Panasonic robots
• 400 V AC, 3 phases, 50 Hz
Wire feeder with intelligent control box
• Parameter setting through the intelligent control box
• Digital display for both programmed parameter and actual welding parameter
• Easy and logical parameter setting by LCD and jog dial
• Motor equipped with encoder provides digital feed back control of wire feeding
• 4-drive wire feeder for aluminium, 2-drive wire feeder for mild steel and stainless steel available.
Quality control
• Memory for 32 programs
• Monitoring function for welding current, welding voltage, wire consumption etc.
Customer Benefits
• High speed, high quality, less spatter welding
• Easy parameter setting by jog dial
• Exact output parameters for easy parameter adjustment
|
|
GB2
High Grade Welding by Full Digital Technology
* Selectable various types of wire feeder
* LED monitor which can monitor welding condition and motor feed load on the controller
* Improve welding quality specially in low voltage range (30 - 120A)
* Lightweight and space saving
* Most suitable for the welding of mild steel and stainless steel
|
|
|
|
|
|
Elektra is an universal electrofusion machine, suitable for welding PE and PP couplings (from 8 to 48 V). It is available in three versions: Elektra 400 Entry (*), Elektra 400, Elektra 800. The Elektra machine is made in compliance with Italian and international standards, and is composed of:
a versatile machine body, capable of adapting to different operational needs, inside and outside the trench; the control panel can be turned upward or be positioned horizontally to the ground
an optical pen - barcode reading system (or optical scanner, upon request) that allows the automatic setting of the welding parameters. There are nonetheless two manual settings available: by setting the welding tension/time parameters, and by input the numerical code indicated under the bar code
an in built memory with 4000 welding cycles, featuring the possibility of transferring data to a PC , to an external USB storage device, or to a serial printer RS-232
a large graphic display
The machine is supplied with a cable provided with Ø 4mm connectors, a set of Ø 4,7 mm adapters, a manual scraper and a transport case.
(*) ELEKTRA 400 ENTRY is the basic model of the Elektra product line. It features a bar code reading system with an optic pen which allows the machine to acquire the welding parameters automatically. Welding certification is printable through a RS232 serial port.
|
|
The TIME Process is a tried and tested high-performance welding process for manual and mechanised applications that has been doing sterling service in industry for many years. By “high-performance”, we mean a welding process that achieves either a deposition rate of at least 8 kg/h, or a wirespeed of at least 15 m/min with 1.2 mm steel wire.
Now the TIME Process has been totally digitised. With all the attendant benefits that come as standard with Fronius digital welding systems, such as: 100 % reproducibility of all welding results, modular system principle, digital microprocessor control, superb welding properties.
|
|
- powerful, Accu-Rated™ - not inflated Miller generator power
- Costs no more than a regular generator
- Buy a generator, get a free welder to do your own welding repairs
- Long run times with fuel efficient engines and 12 gallons of run time
- Up to 11,000 watts of Accu-Rated™ - not inflated generator power
- Built to the highest standards and has a 3 year warranty
|
|
|
|
|
|
Genesis 503 PME
These are inverter power sources purposely designed for exceptional quality continuous wire welding (MIG/MAG, PULSED MIG) and electrode welding (MMA); TIG welding with contact ignition is also possible.
The control panel is easy to use and 52 different synergic curves are available to the operator for MIG/MAG and pulsed MIG welding of all the most common materials.
A duty cycle tested at 40° C ensures interruption free operation to 100% at 25° C.
performance in pulsed arc welding. They are ideal for use even with thin aluminium and stainless steel sheet, with which they give a weld quality similar to that achievable with TIG welding.
The WF104 separate wire feed unit weighs only 19 kg (without wire reel) and can be positioned above the power source on a pin, which permits 360° rotation, or at a distance near the work place by means of a connection cable bundle up to 10 m long; the microprocessor, the Encoder and a sturdy 4 roller gearmotor ensure maximum precision in welding wire delivery speed.
At switch-off, the last welding condition is stored, making it easier to re-start work after interruptions.
|
|
Transportable microwelding equipment for surfacing tools on site (Whithout interruption of production, or dismantling of tools) such as:
- Plastic injection molds
- Cutting Tools
- Rubber Injection
- Extrusion
- Blowing
This device allows microwelding report of the material in small amounts through a variety of materials available in the form of powder, wire or ribbon (36 to 62 HRC).
|
|
|
Machines for SAW welding in combination with Kjellberg Finsterwalde welding power units provide a wide range of technological solutions for effective use in industrial welding production.
|
|
|
|
|
|
PICOMIG 180
MIG/MAG standard welding maschine
HIGHLIGHTS
Inverter DC welding machine, compact with integrated wire feed system
3-in-1: Professional equipment ready for anything with 3 full-scale welding processes
Innovative inverter technology for compact design and low weight
100% suitable for construction sites – optimised for tough assembly work applications
Functionality, resilience and safety even when dropped or on impact
Pole reversal as standard – ideal for welding with self-protective cored wires (e.g. in the open air)
Inspection window to check the wire spool level
MAIN AREAS OF USE
MIG/MAG welding: Solid wire: Steel 0.8 to 1.2 mm, CrNi 0.8 and 1.0 mm, Alu 0.8 to 1.2 mm, cored wire 0.9 and 1.1 mm
TIG welding: unalloyed, low-alloy and high-alloy steels, nickel-based alloys, copper and special materials, repair welding on cast aluminium components
MMA welding with rutile and basic coated electrodes: unalloyed, low-alloy and high-alloy steels, nickel-based and copper alloys
Production and repair work, metal construction, facade, heating and ventilation construction, food and chemical industries, pipeline, closed container and equipment construction, vehicle, machine, plant and tool construction, and more
FEATURES
Portable, gas cooled
MIG/MAG welding, TIG welding (Liftarc), MMA welding
4-roller drive unit
30 preset JOBs (welding tasks) – for common applications (MIG/MAG)
Robust plastic casing
|
|
|
|
|
|
MIG/MAG - conventional all-rounders and digital experts.
Our 1000 times tried and trusted step switch controlled machine series MIRA, SATURN and WEGA or the completely digital PHOENIX inverter machine series - it's your choice!
THE CONVENTIONAL ALLROUNDER - THE STEP SWITCH CONTROLLED MIG/MAG WELDING MACHINES MIRA - SATURN - WEGA
Tried and trusted more than a thousand times over: Robust, step switch controlled - specially designed for applications in trade and industry involving tough operating conditions. They offer universal applications thanks to the many different machine versions from compact/decompact and gas /water cooled through to various wire feed units. They also offer impressive, self-explanatory and intuitive operating concepts for varying requirements - the simplest possible operation for everyone!
PHOENIX - THE DIGITAL MIG/MAG PULSE WELDING MACHINES
This is our completely digital inverter range of machines with maximum simplicity and ease-of-use for all requirements from manual to complex automated MIG/MAG pulse and standard applications. The PHOENIX range promises maximum efficiency thanks to the low-spatter welding on all materials and application, perfect ignition and welding properties with 100 % reproducible results with maximum quality and optimised control interfaces for every application - and these machines keep that promise! It's up to you: PHOENIX PROGRESS - the ideal introduction to the digital machine range - or PHOENIX EXPERT - the high-end system for complex applications, and not just in automated systems. Whichever you choose, you will get pre-programmed welding tasks (256 JOBs) so that you can concentrate fully on your work. The portable design of the PHOENIX 300 also impresses with maximum mobility for assembly work. All in all, the PHOENIX range is ideal for robot, industrial bus and mechanised applications and documentation via optional interfaces!
|
|
|
|
|
|
PHOENIX 333 PULS forceArc
Inverter DC welding machine for MIG/MAG pulse, modular
HIGHLIGHTS
Maximum efficiency thanks to low-spatter welding with all materials and applications
Perfect ignition and welding properties with 100 % reproducible results
Maximum flexibility thanks to the modular and future-oriented machine system
EWM-forceArc® – with optimised technology to shorter production times and higher quality - up to 50 % cost saving
Optimised control interface for every application: PROGRESS with simplest possible operation
MAIN AREAS OF USE
Unalloyed, low-alloy and high-alloy steels, aluminium alloys, copper and its alloys, special alloys
Solid and fluxed-core wire electrodes (0.8-2.4 mm), coated electrodes: Rutile, basic, PHOENIX 500 also suitable for cellulose
Production and repair work: Chemical and food industries, machine and plant construction, vehicle, automobile, railway vehicle and ship construction, container, closed container and equipment construction, steel and metal construction work, offshore, etc.
FEATURES
Multi-process inverter DC compact welding machine
Portable, gas cooled or water cooled with separate cooling module, compact with integrated wire feed system
115 optimum pre-programmed JOBs (welding tasks) – everything immediately accessible,16 welding programs
Multi-voltage operation (230V/400V/480V) possible (Option)
|
|
Metal Inert Gas welding and Metal Active Gas welding are the most widely used welding processes in the world today. The range of possible uses is especially wide in the case of the versatile MAG process, which is suitable for unalloyed, low-alloy and high-alloy base metals. This makes it ideal for use in both the production field and for repair welding. The MIG process, on the other hand, is used for aluminium and copper materials.
All in all, then, a highly versatile welding process.
|
|
Cold Metal Transfer (CMT), a new chapter in the history of welding. The TPS 5000 CMT is a fully digital micro-processor controlled inverter welding system that supports the Fronius CMT process. Besides MIG/MAG, the system is also suitable for TIG and electrode welding.
The innovation that the CMT process introduces is that wire feeding is integrated into process control. This makes it possible to reduce the amount of heat applied; and that means no spatter on the work piece join.
The TransPuls Synergic 5000 CMT with 500 A is ideal for applications in the automotive and automotive supplies industry, avionics and spaceflight, metal working and portal building. In fact, the system is suitable for any automated or robot assisted job. The typical fields of application are thin and ultra-thin sheet joins of 0.3 mm or more, MIG soldering of galvanized sheet metal, and steel/aluminum joints.
|
|
|
|
Welding stations
