|
|
| Products 121 to 150 of 267 |
are tried and tested devices which have been specifically developed for the high demands of industrial cleaning technology.
Due to their modular design they are perfectly suited for all applications.
• Constant power output – continuously adjustable
between 40 – 100 %
• Constant oscillation amplitude
• Interface for monitoring and controlling
process-relevant functions
• Protection from short-circuit, no-load operation,
overload and overheating comes as standard
• Standard frequencies: 25, 30, 40 and 80 to 150 kHz
Other frequencies available on request |
|
Ultrasonic Generator Specification:
- Chassis case designed to allow access from all sides
- Case for generator complete with power lead
- Full range of variable frequency sweep control
- Full range of variable power control
- On/Off switch with output power indicator
- 240v, 50hz supply
- Maximum 750 watt power output (nominal 500watt)
- Utilising MOSFET technology
- Fully tried and tested in the field
- Fully protected against open and short circuit output
- CE certified |
|
·Matched Ultrasonic Generators and Ultrasonic Transducer Packs.
·Power Available - 600, 900 and 1200 Watts
·Pulse/Wave Sweep and Adjustable Power Intensity Control on Ultrasonic Generators
·AC operation - 120v, 220v, or 240v
·Frequencies Available - 28 or 40kHz
·Power Intensity Control includes Stand By Mode with Soft Start Feature to eliminate "in-rush" current-Prolongs circuitry life
·Auto Tuning Circuitry - Finds Optimum Cleaning Frequency to eliminate dead zones - Achieves Uniform Cleaning
|
|
auto industry
techniques of transformatione
thermics treatment
aircraft industry
clock industry
electronics manufacture |
|
| Layers of burnt oil and other solid contaminants (oxides and lapping and polishing pastes) deposited on the component require on the other hand the action of ultrasonics which can be fitted on request in the majority of closed-circuit systems. When the energy of the ultrasonics is transmitted to the solvent, its action is reinforced and detachment is made easier of the pollutants deposited on the surface of the component part, thanks to the cavitation action which quickly produces thousands of small bubbles that implode on the contaminant and break it up. |
|
The Branson B-Series Ultrasonic Vapor Degreaser is the latest in a series of environmentally sound, cost effective precision degreasers. Branson, well known for ultrasonics,is also the global leader in solvent cleaning technology.The B-Series integrates over 55 years of degreasing experience with the demanding needs of a changing marketplace to offer you a functional solvent solution to your cleaning needs. Similar in operation to a traditional two sump unit, they incorporate all of the important environmental and safety features you need, including two onboard compressors for both primary and sub-zero cooling and 40 kHz ultrasonics. All controls are clustered on a compact front-mounted 24 volt digital control panels. The B-Series is ideal for use with most commercially available vapor degreasing solvents.
FEATURES:
Freeboard ratio of greater than 120% to eliminate diffusion losses
Refrigerated primary condensing coil to condense the bulk of the solvent vapors
Refrigerated sub-zero freeboard condenser to provide a cold air barrier minimizing fugitive losses
Sliding cover to eliminate drafts and help seal the unit during periods of inactivity.
Offset boiling sump with liquid level control (except on B452R)
Bag filter to minimize solvent loss during maintenance
Cooled internal water separator to reduce losses
Stainless plumbing for solvent-wetted areas
|
|
Drycleaning Machines are specialized for the pre-cleaning and drying of all sorts of machined parts made of metal or plastics. They work completely with vacuum chambers, aspiration and blowing air. No washing liquids, detergents or solvents are needed. The unique result: Dry parts, complete cleaning from metal chips and a high recycling rate of the oil / emulsion, which is taken from the parts. The liquid is filtered and can be re-used.
We design and manufacture customized Drycleaning Machines for your work-pieces, which can be integrated into your manufacturing process quiet easily. Special loading- and unloading systems are engineered according to your request, e.g. with pneumatic grips, step-by-step conveyors or work piece receivers. |
|
| The Mono-stage and Single-chamber systems, series M100, are suitable for cleaning metal component parts of various shapes and of small and medium size. These systems, normally installed on production lines or in repair workshops, are able to achieve particularly good results in eliminating emulsified oils, pastes and machining shavings. |
|
Key's Direct StreamTM Wash System is an integrated, patent pending method of washing and centrifugally drying fresh cut produce. From Key's Freshline group of products, Direct StreamTM ensures that cut products are "streamed" in a uniform and regulated manner through the wash to the centrifuge's drums.
Direct StreamTM Wash Systems offers effective log reductions of bacteria by using multistage wash systems in series. |
|
Automatic Degreasing Tunnels
* In-line tunnel
* Treatment in chamber
* Handling of parts by overhead or ground-level conveyor
Lance Washing Booth
* Ventilation according to operational mode
* Multi-functional (washing / drying)
* Construction adapted to degreasing agent (lacquered metal, stainless steel...) |
|
Tunnel machine is considered the most traditional of washing/chemical treatment systems and is suitable for the cleaning and chemical treatment in general of details with simple shapes.
These machines are often used in the production lines of mechanical, automotive and aerospace companies for inter-process cleaning or for precision cleaning before assembling. Due to their own flexibility, tunnel equipments can be used for big and small productions.
Designed exclusively for water based spry cleaning, the treatment effect is based on the chemical, mechanical and termical action in order to insure good cleaning results.
The working principle is based on a linear movement of the parts through many phases of the treatment by continuous movement or by positioned stops in front of sprying jets for precision cleaning. During this movement the parts are involved by heated cleaning solution in high pressure.
In the case of a tunnel with a conveyor belt, the components are loaded on to a conveyor (with a fret mesh or bars) which conveys the pieces through the different stages of treatment: the development of the machine is in line |
|
| ... products without technical information |
| |
|
|
Cleaning machines, Washing machines
