|
|
unite robust construction with high efficiency and flexible connection options, while offering a broad spectrum of applications.
• Long service life through use of a special steel alloy for the casing
• Extremely good sonic yield due to use of optimized piezo transducer elements
• Standard frequencies: 25, 30, 40 and 80 to 150 kHz
Other frequencies available on request
• Multi-frequency transducers with 40, 80 and 120 kHz |
|
The Magnus MAGNA LIF is an immersion washing and processing system that mechanically agitates parts in a chemical solution.
Provides Dual Agitation - parts and the cleaning solution are both agitated to assure thorough cleaning.
Finger tip control - allows for a single control that raises and lowers the platform for easy loading and unloading.
Dial-A-StrokeTM Control - unique control panel changes the length of the stroke from short, medium or long at the flip of a switch, allowing complete cleaning of parts with complicated internal passages.
Virtually trouble free - engineered with an outboard guide roller. The cantilever design greatly reduces maintenance and provides for easy lubrication. Protects from possible attack of cleaning chemicals, dirt and other materials.
Cost Savings - eliminates hand scrubbing and minimizes production rejects through superior cleaning capabilities. |
|
The hydrokinetic washers exploit the mechanical action of the liquid (usually water and detergent or water-based solvent), moved at high pressure and flow-rate inside a washing chamber that includes a rotating drum holder.
Typical applications include the treatment of considerable amounts of turned items, inserted in large drums, although other pieces, also of large size, can be directly placed inside them.
The combined action of the moved liquid and the rotation of the pieces around their axis facilitates the removal of oily residues, and especially of all process residues.
The washing cycle is based on a spray phase and an immersion phase, during which the detergent solution is shaken vigorously. This combines the chemical action of the degreaser with the mechanical action of the jets.
This procedure may be followed by a rinsing phase and by air or air-vacuum drying. |
|
In-Line Systems - TunnelSonics
Individual Small Parts Conveyorized Ultrasonic Cleaning Systems :
The TunnelSonics parts washers are a continuous conveyorized in-line flow Neptune Radial systems. The TunnelSonics products are is ideal for applications such as In-line continuous product cleaning of small parts from:
- screw machines
- stamping operations
- lapping and similar operations
- machine parts
- part assemblies
- fasteners
- springs
- header operations
Where continuous product flow is preferred, the In-Line system can clean, rinse and dry at speeds up to 20 feet per minute in mild aqueous solutions.
Cleaning is achieved by passing the product through exclusive Power Sonics RADIAL 360° transducers. Cavitation levels are 10 times, or more, as great at the same power input as conventional flat type transducers. Floor space is optimized since systems are generally integrally mounted on their own bedplate, also simplifying installation. |
|
By combining hands-off, total immersion cleaning, easy part load/unload, vertical
lift platform agitation and optional Graymills Superflo pump jet action, the Liftkleen
offers the most intensive, efficient immersion cleaning system available. Complex
parts, stacked or nested parts are no problem.
The T and L Series Liftkleens offers a variety of sizes and options, including pump,
agitation, ultrasonics, and automatic control of cleaning cycles, that make it the
easiest-to-use, large size cleaner on the market. One touch control of the pneumatic
air system and electronic controls turns multi-function operation into a simple step. |
|
| The FlexTRAK system offers high-throughput capability of up to 480 substrates or process carriers per hour. Its small chamber volume and proprietary process control enable unmatched short cycle times. |
|
The Magnus AJA LIF is a heavy duty, low maintenance immersion washing and processing machine that mechanically agitates the parts in a hot or cold cleaning solution.
One Tough Workhorse - the standard AJA LIF has a load capacity of 2200 lbs. of parts, and heavier optional load capacities are available (see available options).
Three Agitation Stroke Lengths - selection of short, medium or long strokes engineered to allow cleaning a variety of parts.
Thorough Cleaning - reaches difficult interior areas of parts because moving parts through cleaning solution creates greater cleaning effect than simply moving liquid around parts.
Cost Effective - better cleaning minimizes costly production rejects and eliminates hand scrubbing.
Air Powered Lift/Agitation System - provides greater agitation speed than comparable electromechanical lift devices. |
|
| The XD Series Ultrasonic Wash Tanks are large capacity units designed for heavy-duty industrial applications as well as smoke and fire restoration. Units are complimented with versatile insert tanks for use as rinsing, presoaking or indirect ultrasonic cleaning. Units also include parts baskets and modular ultrasonic components. Stainless steel construction is used throughout to ensure durability even in the most demanding environments. Available in four models and tank sizes. |
|
Unit Features:
- Double-walled insulated wash tank and hinged lid
- Heavy duty 4" soft ride locking castors
- Brass 1.25" ball valve drain.
- Three stainless steel parts Baskets or stainless steel.
high-duty parts rack (specify when ordering).
- Stainless steel power station for ultrasonic generators-One
button operation.
- On board heat with digital thermostat control.
- Filtration System: High-volume 5 Micron replaceable cartridge.
with stainless steel housings.
- Filtration Pump: Stainless impeller with up to 40 GPM
flow rate.
- Wave Sweep: Eliminates standing waves and promotes
uniform cleaning.
- Power Intensity Control: allows user adjustable power
output for delicate cleaning when needed. Output shown
on LED display.
- Soft Start: Eliminates electronic failures from current
inrush loads
on start-ups. |
|
Designed as a modular industrial ultrasonic cleaning system for ophthalmic lenses.
- Switchable multifrequence technology.
- Infinitely variable power adjustment
- Selectable operating modes
- Individually configuration because of modular system
- Long lifetime through cavitation resistant stainless steel
- Automatic operation by robotic basket transporation |
|
The HydroCat is equally effective on vertical surfaces such as ship hulls and tanks, on horizontal surfaces such as flat decks, and on overhead surfaces such as the bottom of ship hulls. It traverses smoothly over weld seams, doubler plates, lap joints and riveted seams. It easily moves in and around keel blocks and other common obstructions. And for straight line work the HydroCat automatically stays on course with its exclusive "autopath control."
Benefits
100% collection and containment of water, paint and corrosion products
No grit to collect and dispose of
High productivity; cleans up to 1,000 sq. ft./hour
One operator
Simple; fully automated so setup and operation times are reduced
Standard Features
HydroCat:
12 inch cleaning path
Omni-directional steering
40,000 psi x 6.5 gpm
Vacuum attached
|
|
| As a supplier of complete systems, we also cooperate with various specialists to produce an all-round solution tailored to your specific needs if desired and when particular purity requirements have to be met. |
|
The Atlantis microplate washer is renowned for its excellent price/performance ratio. Equipped with features usually only available as optional extras, the Atlantis is the ultimate choice for discerning laboratories. Operation is simple, with the two line alphanumeric display and 5 soft keys for easy programming; the Atlantis allows up to 50 wash programmes and 20 plate types to be permanently stored. In addition, the plate carrier is detachable for cleaning and the quick changing of manifolds simplifies the use for different plate types The unique manifold position sensor allows a precise height adjustment which minimises residual volumes. Digitally controlled aspiration and dispensing pumps
provide high accuracy and low noise levels. |
|
Digital frequency generation and control, constant power output and the interval function ensure that the parts are cleaned extremely precisely.
- Digital frequency generation and control
- Multi-frequency with 40, 80 and 120 kHz for coarse, fine and superfine cleaning
- The SONIC DIGITAL MULTI is available as a two-frequency and three-frequency device
- Constant power output - digitally controllable between 10 - 100%
- Separable generator and control console
- Interface for monitoring and controlling process-relevant functions
- Switched mode power supply
- High efficiency - low heat build-up
- Optimized operational reliability |
|
The parts to be cleaned are placed into a revolving basket Rapid cleaning is achieved by spraying hot detergent solution from three spray pipes located around the backet.
Specifications:
Basket diameter (mm) of 950 to 2600.
Maximum loading (kg): 1000 to 2000:
Pump pressure (bars) : 3 to 30
Applications:
Cleaning of parts between processes
Cleaning of parts prior to assembly
Surface treatment
Degreasing of mechanical parts within a few minutes..
Characteristics:
A range of 6 machines
Enclosed environment
Robust stainless steel construction
Avalaible with one of several tanks
Easy access to tanks
Low consumption of detergent and energy |
|
The equipments Ceever "Robot" serie are machines composed by different basins, one or more automatic trolley for the automatic mouvement of the baskets from one basin to another and one gallery that closes everything.
The big success of this kind of equipment is mainly obtained by its own versatility, big productions rate, very good reliability and the very low enviromental impact.
The versatility is, at first, a constructive versatility : it's possible to adapt it to several kind of treatments cycles and to adapt very different kind of automatic loading and unloading system.
Another very important feature is the "random system" that allows to choose for every basked its own treatment program: it's possible to give a program to every basket that's going to be treated in order not to work by lot. This system gives a very big versatility in the use of the equipment. |
|
Magnus Equipment has a broad range of standard parts washers to address most cleaning applications (Selection Chart).
Features include:
Loads from 100 lbs. up to 4000 lbs.
Aggressive pneumatic vertical immersion agitation
Sloped bottom, filtration
Air sparger, coalescing
Ultrasonics, rotation (where applicable)
10 year warranty on all air cylinders
Magnus Equipment specializes in designing custom systems from $10,000 to multi-million dollar projects.
Capabilities include:
Process design to meet cleaning / drying requirements
Project engineering to meet throughput requirements
Turnkey startup
After sales support
Guaranteed clean & dry parts
To find out how Magnus can address your specific requirements, please send us an email.
Magnus Equipment
info@magnusequipment.com
800.456.6423 • 440.942.8488 • Fax: 440.942.8590
4500 Beidler Road • Willoughby, Ohio 44094
Copyright 2001-2003
|
|
Miele offers the fully programmable model IR 6001 Industrial Washer. Designed specifically for industrial batch cleaning applications the IR6001 features multiple dispensing pumps (for detergent, neutralizer and additives such as saponfiers), low water consumption and a powerful forced air drying unit.
Depending upon the complexity of your application, Miele laboratory glassware washers can also be utilized for industrial cleaning. All Miele washers allow for purified hot water rinses, automatic detergent and neutralizer dispensers, powerful water circulation and a host of specialized inserts and baskets |
|
The CIP unit, together with our cleaning fluids, facilitates cleaning of the plates in an efficient and caring manner, without reassembling of the plate heat exchanger. The CIP unit is therefore a good investment when reliability centered maintenance is applied to secure your production. The unit can be used for cleaning of anything from evaporators, steam-boilers, hot water circuits etc.
|
|
| The PM-100 low-cost plasma cleaning solution for treating electronic components, printed circuit boards, and medical & life science devices. The PM-100 plasma system is ideally suited for laboratories, universities and research and development (R&D) facilities that are highly sensitive to the cost of capital equipment. |
|
Applications:
-Light to medium-duty cleaning
-Usually 3 or more employees
-Perfect for general auto service and repair, fleet maintenance, industrial maintenance.
-Uses 140° Flash or VOC Exempt Solvents (SCAQMD Certified) with recovery hood
-ETL, CSA and EU certified |
|
Applications:
-Medium to heavy-duty cleaning
-Extra wide and deep wash platform for large or bulky items
-Perfect for transmission shops; manufacturers; heavy-duty equipment cleaning, and heavy-duty repairers/rebuilders
-Uses 140° Flash or VOC Exempt Solvents (SCAQMD Certified) with recovery hood |
|
Applications:
-Light to medium spot cleaning at remote sites or where parts cannot be transported for cleaning.
-Can be shared by everyone in the shop. Extends the use of your existing parts cleaner.
-Perfect for general auto service and repair, fleet maintenance, industrial maintenance.
-Uses solvents supplied by your main parts washer.
-ETL, CSA and EU certified |
|
A two basket rotary flood and spray wash,rinse and dryer giving high quality cleaning.
The machine has a small footprint ideal for cell type manufacturing |
|
Standard features:
- Oil wheel with collection tank
- Removable chip basket
- Adjustable spray pressure
- NEMA 12 electrical enclosure
- Door safety interlock
- Adjustable wash cycle timer
- Electric immersion heater
Optional features:
- Tank Level Option - features heater protection and automatically maintains liquid level of tank
- Elevated Parts Basket - provides a second tier for increased capacity of parts, protective basket coating available for delicate parts
Specifications:
- Turntable Size: 36" Diameter
- Work Opening: 38" W x 50" H
- Load Height: 32" High
- Overall Size: 55-1/2" W x 85-1/4" H, x 57-1/2" D
- Tank Sizes: 114 Gallons
- Heater Size: 18 KW (1)
- Drive Size: 1/4 HP DC
- Pump Sizes: 5 HP (10 HP opt.)
- Max. AMP Draw: 25A @ 480 Volts |
|
Viking Washers :
- Rotary Washers
- Swedebrator Basket Washers
- Tumble Washer - Endless Belt
- Pass Through Washers
- Vibratory Shakers |
|
|
|
Cleaning machines, Washing machines
