|
|
| Products 91 to 120 of 267 |
| For the cleaning of flat, panel-like products. The machine has its own driven transport rollers for a smooth and secure transport of the product (red) through the double-sided cleaning. |
|
The new regulations about the emission of chlorinated solvent have taken to develop these new CK vacuum machines serie that works with hydrocarbon solvent without any problem of external emission.
These solvents are biodegradable and nontoxic for aquatic life. They have no harmful effect on the ozone layer they have a low vapour pressure. The disposal of distillation waste is qualified as special waste and not as toxic/harmful.
The system is formed in monobloc by a single horizontal cylindrical cleaning chamber with a longitudinal axis rotary structure located on the inside , 1 or 2 solvent’s tank and one vacuum solvent’s distiller. The rotary structure, inside the cleaning chamber, has a frontal disc with an aperture to allow baskets loading and unloading, and it is usually supported as an overhang by its own transmission shaft. The rotary movement is transferred to the structure by means of a motorised transfer box which is powered by a shaft connected to the structure by the rear disc. The machine allow the following operative choices:
• without rotation
• basculating
• slow rotation
• mixed rotation
On the machine there is olso a vacuum solvent distiller that have 2 main functions:
• Allows to have a closed circuit equipment
• Allows to clean or rinse with fresh solvent |
|
For component cleaning with:
- Chlorinated solvents - trichloroethylene / perchlorethylene
- Hydrocarbons
- Hermetically Sealed solvent component cleaning system
- Meets current environmental regulations
- Vacuum drying
- Cleaning in fresh, distilled solvent every cycle
- Ultra-low solvent use and emissions
- Complete stainless steel construction
- Small foot-print : higher cleaning capacity
- Easy service / maintenance access
- Integrated handling options
- Wide range of sizes |
|
| Mac-Dry solvent systems perform the washing cycle inside a sealed chamber, into which one or most baskets have been previously introduced containing the parts to be treated. When the cycle is started, once the door has been closed, a first pre-washing bath is performed lasting 1 minute, in hot solvent (temperature between 45°C and 80 °C depending on the type of solvent and type of pollutant), sprayed by means of high-pressure jets directly on the parts. The solvent of this first bath, which now contains 90% of the contaminants in solution, is then conveyed to the distiller incorporated in the system, which fully regenerates the liquid for subsequent re-utilisation. |
|
The Clean-O-Matic Series progresses
in size and power from the 300-A,
with a 1/8 horsepower pump and
42-gallon capacity, to the 902-A, with
two 1/3 horsepower pumps and
117 gallon capacity.
All models feature three way cleaning—
pump for in-tank agitation that loosens
dirt/grime on soaking parts; pistol grip
nozzle for flushing away contaminants;
and Flexible Stay-Put flush hose in
conjunction with a hand-held brush. |
|
| This compact spray cleaning and drying system with process validation has been developed for various industries (medical, precision, electronics, watch making, ophthalmology etc.) and is available with one or two doors. |
|
Sprymaster plants are washing booths provided with fixed or rotating internal platform for spray washing with a water-based detergent.
Operation is clean, odourless and fully isolated from the surrounding environment. The spraying chamber is closed by a front door driven by one or two pneumatic cylinder(s) or a motor reducer and racks. The ducts of the spraying nozzle network are oriented in the washing chamber.
The jet configuration has been arranged in such a way as to cover the surface of the items being treated through a procedure which includes chemical, mechanical and thermal functions. |
|
The parts to be cleaned are placed into a revolving basket Rapid cleaning is achieved by spraying hot detergent solution from three spray pipes located around the backet.
Spécifications:
Basket diameter : 600 to 1100 mm
Maximum loading : 500 kg
Pump pressure : 2 to 10 bars
Applications:
Cleaning of parts
Cleaning of tools
Surface treatment
Cleaning of parts for reconditioning and renovation.
Degreasing of heavily contaminated parts within a few minutes..
Characteristics:
Enclosed environment
Strong stainless steel construction
Small space required
Short pay back time
Low consumption of detergent and energy |
|
parts resting in baskets or racks
charging operations
standard design in 2 (charging) sizes
customized adjustments
modular design
single or multi-stage washing and rinsing process
spraying, immersion, flood and blow-off cleaning, ultra-sound, hot-air drying, vacuum drying
turning and rotation of goods
manual and automatic charging |
|
The stainless steel constructed tunnel conveyor washer incorporates one or more stages (washing, rinsing, drying,...). It works within an enclosed environment and degrease parts by spraying hot detergent solution (from 1 to 5% of detergent). The conveyor conveys the parts to be cleaned.
Applications:
Continuous washing
Washing of parts prior to assembly
Degreasing of parts between process
Washing according to cleanliness standards.
Characteristics
Modular construction
Stainless steel construction
Easy maintenance with easy access to chambers and tanks |
|
| We produce and complement sinks, soapboxes, trash-cans from stainless steel according to client's premises and requests. They can be for usage of several people at once, with sensory control, convenient batcher for soap or other disinfecting mean, with a trash-can and a towel-horse. |
|
Contractor Rugged, Single-Operator Robot
The Eliminator is a compact, maneuverable stripping robot with 360 degree unrestricted visibility for its single operator.
The Eliminator, a true contractor-friendly system, features forward and reverse cleaning, allowing for easy removal of all pavement markings: long lines, chevrons, diagonals, arrows, and other short radius obstacles. Its versatility and compact size enable work in low overhead areas, parking garages and on other membrane-removal projects. The HUSKY® pump and hand tool accessories separate easily from the Eliminator system for use with other cleaning or cutting operations.
With the Eliminator, paint and thermoplastic are completely removed from pavement crevices and pockets without roadway surface damage. The Eliminator removes ghost lines and confusing markings dramatically improving motorist safety. Flow's industry standard HUSKY pump and exclusive floating head design give the Eliminator a clear advantage over competing systems.
Benefits
Improves motorist safety
No ghost lines or grooves
No damage to road surfaces
Unique nozzle attack patterns
Highly maneuverable and productive
High road clearance
FHWA and DOT approved Specifications
High-pressure pump: Flow HUSKY model S-200 Diesel
Maximum continuous operation: 40,000 psi, 6.5 gpm
Robot:
Toro hydrostatic custom robot
Kubota 49 hp diesel engine
Hydraulic UHP Flow swivel: 1,800 - 2,700 rpm
Cleaning head options: 9", 19", 27"
|
|
Universal Cleaner Lubricant
All surfaces
Biodegradable as per OECD 302 B
Cleaner, protector, lubricant, penetrant
Dielectric strength 35000 volts |
|
Sawing lines can of course be automated even further by adding a tube washer, capable of internal and external washing, irrespective of the shape of the tube, whether it be round, square or rectangular.
The TCM-90 tube washer is manufactured from stainless steel and uses glass wool insulation to minimise heat loss. The unit features a 1200 mm drying zone. The TCM-90 is the most flexible machine on the market for perfect washing results and can be installed in-line with the entire range of Bewo automatic circular saws.
|
|
| Magnus' sister company, Power Sonics, provides the ultrasonics for Magnus immersion agitation tanks. The ultrasonics cavitation distributes a very intense mechanical energy to reduce cleaning time and clean some soils that immersion agitation alone will not remove. Our ultrasonic application involves more than placing some transducers in a tank. Magnus uses the expertise of Power Sonics to integrate the ultrasonics and insure it is the right application for the situation. Ultrasonic tanks may employ a sequence of alternating immersion agitation and ultrasonics to provide the optimum cleaning. Power Sonics Ultrasonics is available integrated into Magnus immersion agitation systems as well as custom mono-rail or in line systems. |
|
The units of the "Compact U.S." or "Special U.S." series are made up of washing tubs supplied with one or more electrostrictive transducers.
Their operating principle consists in propagating vibrations through the liquid at a variable frequency, that can generate high-pressure and lowpressure waves, resulting in the cavitation of the liquid.
Cavitation produces vapour bubbles that implode and thus hit the walls of the component being treated an infinite number of times. This reduced but diffuse force helps detaching the dry dirt. All reservoirs are constructed in stainless steel and are doubleskinned with thermal insulation.
The construction of multiple stage systems in semiautomatic and automatic versions may be achieved by aligning the single units according to the treatment which the mechanical pieces must undergo. |
|
The final operation in the process of precision surfacing with abrasive media is cleaning, and Lapmaster Ultrasonic Cleaning Systems offer performance second to none.
Ultrasonic cleaning is faster, more thorough, and safer than any other method. Scrubbing, soaking and steam don't even come close. Lapmaster Ultrasonic Cleaners are powerful enough to remove heavy oils, waxes or slurries, yet gentle enough to clean tiny, precision assemblies.
Ultrasonic sound waves moving through a cleaning solution create an effect called cavitation: the rapid formation and implosion of microscopic bubbles. Heat enhances the process. The deep cleaning action of ultrasonics removes even the most stubborn dirt and contaminants.
There are many models available, from stand alone benchtop systems with capacities of 1/2 gallon up to 13 gallons to larger floor standing production systems with multi-tank automated processing capabilities. Lapmaster also offers a complete line of companion cleaning agents and equipment accessories.
Let the Lapmaster Applications Lab process a sample of your components. Our technical staff will select the most cost-effective approach to lap, polish and clean your components. |
|
Continuous in-line flow RADIAL systems are ideal for applications such as in-line continuous product cleaning of wire, strip, rod, tube and bar material. These systems clean, rinse and dry at speeds up to many hundreds of feet per minute in mild aqueous solutions. Cleaning is achieved by passing product through exclusive Power Sonics RADIAL 360 degree transducers. Cavitation levels are 10 times, or more, as great at the same power input as convention flat type transducers. Floor space is optimized since systems are generally integrally mounted on their own bedplate base, also simplifying installation.
- Available in two diameter sizes
- Ultrasonic wash, spray rinse models
- Ultrasonics wash, ultrasonic rinse models
- Options for pre-spray and post-spray sections
- Options for air wipe sections
- Various filtration and other ancillary options available |
|
| ultrasonic cleaning tanks, single or two-stage cascade immersion and spray-rinsing tanks, hot air dryers, vacuum dryers, centrifugal dryers, solvent dryers, ultrasonic degreasing machines, spray-cleaning machines. |
|
| The tanks of cleaning of range SETSONIC constitutent work stations for the applications of cleaning in detergent bath for the production lines and the services of maintenance in many industrial fields. |
|
Ultrasonic cleaning SONOWAVE
with external generators are specifically designed for the high demands made during industrial use.
• Cleaning tank made of 2 mm stainless steel 1.4571
Base of the tank made of 3 mm stainless steel 1.4571
Casing made of 1.5 mm stainless steel 1.4301
• Ultrasonic generator with all features of the SONIC DIGITAL generator series
• Heating with digital temperature control up to 80° C and digital display
• Digital time setting and display
• Standard frequencies: 25, 30, 40 and 80 to 150 kHz
• Multi-frequency cleaning tank |
|
Standard and bespoke sizes available.
Single tank ultrasonic aqueous cleaning system with the following features:
- All stainless steel
- BSP drain valve
- Heated tank
- Thermostatically controlled
- Bolt in transducer plate
- Separate generator (see below)
- Tank size (as required)
- Overall size (as required)
- Capacity (as required)
- Industrial standard - continually rated
- Insulated frame
- Basket & lid inclusive
- Table top mounted
- Operates from standard mains volatage
- CE certified |
|
Ultrasonic Parts/Restoration & Blind Cleaner-
The versatility of modular construction allows the user to have 2 different tank configurations using a matched set of 2400 Watt ultrasonic components |
|
Generators (power supplies) create the high frequency energy that produces cavitation in the cleaning tank. Branson offers the broadest spectrum of equipment in the industry, including both magnetostrictive equipment and piezoelectric units with features like line/load regulation, true variable power control, sweep frequencies, power modulation and power monitoring.
|
|
Power Sonics has several exclusive individual portable ultrasonic generators to significantly improve quality, reliability and performance of ultrasonic cleaning equipment and power our line of transducers.
GM Generator is a completely redesigned generator featuring IGBT technology and has a unique load compensating circuit that is particularly effective in gaseous solutions. A replaceable and cleanable filter is included over the air-cooling fan. The GM replaces the GL generator and provides the same improved cavitation and uniformity under less than ideal operating conditions. These generators power both the Type IP immersible transducers and the CT Type tanks (Transducerized Console Tanks). |
|
|
|
Cleaning machines, Washing machines
