|
|
| Products 121 to 150 of 206 |
Designed as a "Plug and Spray" machine, the Magic Flow is the best System to ensure repeatability whilst complying with the toughest EPA legislation. The mixing ratios can be stored in a wide range of up to 50 recipes and the icon guided touch screen allows easy communication between operator and machine. The precise dosing will always ensure a perfect finish. MagicFlow for all applications - including high and low pressure with solvent or water based paint and materials - Binks MagicFlow is the best solution.
|
|
Adapted for semi-automatic volumetric dispensing operations, the new mta CD cartridge dispenser is electronically controlled allowing setting of the volume to be dispensed. The CD can be integrated into the platform of mta’s TR 300 table-top robot based on 3 fully programmable numerical axes or on a pneumatic station.
Compared to time/pressure-systems, the CD offers significant advantages:
- Higher precision achieved via the stepper motor.
- Process-security: the plunger is always in contact with the piston of the dispenser. No air cushion between the material and the plunger can occur.
- Independent of product viscosity – a constant force is applied to the material.
- No further customization necessary thanks to standard cartridge type.
- Positioning of the needle is always at the same height independent of the cartridge type used.
- Pullback function to avoid dropping at the nozzle tip.
Furthermore, the CD allows you to:
- Use the same dispenser with other materials by simply unclipping/clipping the cartridge - no adjustments and tools required.
- Avoid cleaning of the dispenser thanks to the zero-contact design.
- Dispense mono-component products such as cyanoacrylate, solder paste, grease or glue. |
|
Advantages of Gericke Volumetric Screw Feeders
+ High dosing accuracy
+ dosing pipe and spiral/screw fast against other size/sizes of exchangeably
+ simple cleaning
+ durable design and nearly unlimited life span
+ complete from stainless material manufactured (except drive unit)
+ extended dosing set up to several meters of length possible |
|
In principle, volumetric feeding is the simplest, most economical feeding solution available. Bulk material is held in a hopper and constantly fed into a process per unit of time. A gravimetric feed rate may be inferred through a calibration process where a timed sample is taken and weighed, and screw speed adjusted accordingly. Although there is no weight feedback to assure feeding accuracy over time, this may not be a concern for materials with consistent bulk density.
K-Tron offers three choices in volumetric feeders: the highly accurate bulk solids pump (BSP), single screw feeders and twin screw feeders. K-Tron volumetric feeders come in a wide variety of of sizes and configurations to meet your application requirements.
|
|
The unique MCPI’s Multi Channel Feeder, is probably the best solution on the market, to give a simultaneous, quick and accurate dosing of ingredient on multiple application points, with sprinkling effect.
These feeders are controlled with motor rpm and outlet section of extractor. MCPI’s “Short-cut system” is mechatronic solutions which ensure a perfect control of the extractor movement with repeatability below 3/100 sec, to ensure quick and accurate feeding.
This range of machines is an efficient cost effective solution for high cadencies productions (dosing time from 0.2 sec, up to 60 dosing cycles / min). The feeder can be fit on “C” shape mobile truck, to facilitate cleaning operations.
Design of these feeders is made in agreement with drug and food industries requests for cleaning.
For more detail, see enclosed PDF data sheet |
|
Regularity of proportioning
Proportioning of difficult products
Devoutor adapted to the product
Design facilitating cleaning
The system of dévoûtage fulfills with him only the functions of perfect filling of the screw of proportioning and dévoûtage in the tank.
Solutions of fast disassembling were especially studied to support cleaning.
The materials used are selected according to the characteristics of the product to proportion.
Principles
A cylindrical tank equipped with a devoutor and a mechanical system of proportioning without air nor vibration allowing to proportion any type of products in powder form or granulated.
The output control is obtained by variation speed on the system of proportioning. The cramming of the system of proportioning is carried out by the devoutor who fulfills this function, while dévoûtant the product in the hopper.
Examples of treated products
Dry flours, powder cocoa, fruits, frozen talc, salt, sugar, vegetables, sulfur, metallic oxides, dry grapes, almonds, pigments, pellets, fibers |
|
The ZFP/DM model is a mechanical discharge and metering unit for powders stored in bulk. It can be fitted under any bottom hopper.
The storage capacities can be from 50 litres up to 5 cubic metres. It caters for outputs from a few l/h up to 15 m3/h according to the product.
Its design provides many possibilities :
· material (mild stell, stainless steel, PEHD)
· fixed or variable throughputs
· single or multiple metering conveyors, rigid or flexible
· numerous discharge diameters (350, 500, 800, 1000, 1250 mm)
· numerous options (lid, grid, supports, switches, inspection hatch, etc...)
ADVANTAGES
Mechanical discharge, without air or vibration, therefore without contamination or compaction.
Low power consumption.
Totally sealed and dustproof, quiet in operation.
Ease of installation with flexible conveyor.
APPLICATIONS
Sack-emptying hopper
Buffer hopper
Discharge from Big-Bag or container
|
|
Suitable for packaging granular and other homogeneous, easy-to-transport products like : sugar, salt, rice, coffee, bird feed, dried fruit, washing powder, pasta.
DV200 AND DM200 VOLUMETRIC FILLING MACHINES
To fit onto bagging machines or semiautomatic versions, with stands and work tables.
Features
Operate independently from the bagging machine
Telescopic containers adjustable for a proportional volume from 1 to 2.
Closing with a flap
Interchangeable containers
Electronic control of discharge point
Poss. build in a servo for automatic container adjustment, enabling synchronisation with a weight controller
A set of stainless steel containers
Optional equipment:
Extra set of buckets
Servo motor to regulate automatically the capacity of cups
All-stainless steel build
Special hopper with a stirrer for difficult products
Rotating brush
Level sensing device
|
|
It is, with the transfer, the oldest know-how of Spiroflux.
The dispenser on ground DRD, first of all, was one of the "products headlight" of the company. We manufactured some more than 2500 specimens, and always let us manufacture we, although gravimetric measuring makes him competition cruelly.
Practical, allowing the désachage matter, particularly robust,... it still remains to him of beautiful days in front of him, in France as with export.
The dispensers of colorants, then, such as FD and DCU are very competitive equipment (price/quality) which forges the reputation of Spiroflux.
Sold directly on catalog, they are held in stock (like their spare parts), and thus quickly operational at the customer. |
|
Fully automatic polyelectrolyte solution system for granular and concentrated liquid polyelectrolyte (for other products on request).
Designed as two-chamber pendulum system. Our systems achieve a reliably high quality in preparing polyelectrolytes while saving resources as much as possible.
|
|
Weighfiller
For automatic and precise dosing of dry, free-flowing products
Liebel Dosing systems LDS 1, LDS 2 and LDS 3 (single, twin, and triple linear weigh fillers) can be used for high precision dosing of powder, grain, granulate and chunky product. This can be herbs, teas, spices, coffee, sugar, wheat, pharmaceutical products, screws, bolts etc …. Our industrial standards guarantee excellent precision together with unsurpassed reliability over many years of life-span. Stainless steel finishings with polished surfaces and a high ground clearance permit excellent cleaning properties.
- Complete finish in stainless steel
- Adaptive controller with self-learning limiter and dosing speed
- 25 memory cells for different articles
- The dosing channels are adjustable to cope with very different product dimensions and attributes, optional also from memory
- Open design, easy to clean
- Also available as “multi-construction“ for high capacities or product mixtures
- Either manual handling or synchronization with packing machines |
|
Series E Hand Held Test Measures:
The Seraphin® Series E test measure is manufactured of type 300 stainless steel. It is available in any capacity from 5 liters (1 US Gallon) to 40 liters (10 US Gallons). Typical sizes are listed in the specification sheet, however custom capacities are available. Seraphin® no longer manufactures terneplate test measures (see news and events). Our hand held measures provide a true standard of comparison for verifying the metered output of liquid dispensing equipment. They are ideally suited for fuel dispensing and other precision liquid metering applications.
A Seraphin® test measure is easy to use, reliable, low cost way to measure the output accuracy of liquid metering equipment. They are built and calibrated to the latest OIML R-120, API and NIST handbook 105-3 standards. Seraphin's® test measures have served as the filed standard used by most Weights and Measures authorities since 1915.
The Seraphin Advantage:
Whether you need to ensure compliance with Weights and Measures requirements, or are looking to support ISO requirements for meter calibration, or simply wish to maximize the economics of your metering application, Seraphin® volumetric test measures offer a proven solution. Many Seraphin® test measures remain in use today, decades after first being placed in service. The de facto industry standard for fuel metering applications, Seraphin® boast unsurpassed quality, accuracy and reliability. Each Seraphin® measure is backed by decades of solid performance and reputation. |
|
Virtually any bulk material, from any upstream source, to any downstream destination
Whether you are sourcing material from bulk bags, silos, manual dumping stations, process equipment or all of the above; weigh batching one ingredient or 50; blending your recipe; filling containers, and/or delivering it to process vessels, packaging lines, or any other destination; Flexicon has the comprehensive selection of equipment you need for a total weigh batching solution.
From individual loss-of weight bulk bag weigh batch dischargers to automated gain-in-weight batching/ blending systems integrated with your upstream and downstream equipment, Flexicon offers you the entire range of specialized equipment -and the engineering talent-required for a smooth start-up and efficient performance.
Equally as crucial to your weigh batching success is the proven ability of Flexicon equipment to move your material-at high rates for fast batching cycles and at steady dribble-feed rates for highly accurate weighments -and to deliver recipes with no separation of blended materials and no exposure to potential contamination.
Whether your ingredients are free-flowing pellets, powders that pack, bridge or smear, products that fluidize, or blends prone to separation, Flexicon can move them positively, weigh them accurately, and deliver them in prime condition.
|
|
K-Tron Gain-in-Weight Batching Stations provide flexible and economical batch prep for applications up to eight components and 100 recipes.
Accommodates any K-Tron volumetric feeder, including single screw, twin screw, Bulk Solids Pump (BSP), or any other PID device
Accurate, durable three-point collection hopper weighing
Full-featured KGIW controller with automatic recipe control, multi-line alphanumeric display, configurable I/Os, integrated reports and IP65 stainless steel enclosure
Supports connection to a PLC via Interbus-S, Profibus, or DeviceNet
Optional supervisory link via serial line or Ethernet TCP/IP |
|
This range of batchers makes it possible to proportion any type of powder and in particular the clogging, sticking powders and mottantes.
The principle of dévoûtage guarantees a perfect and constant flow product allowing a precise proportioning.
The flows according to the models can go from 1 kg/h to 20 t/h
with accuracies of 0,5%.
Solutions of easy disassembling allow fast and easy cleanings. All the parts in contact with the product are accessible easily and without tools.
According to the process and environment, research department PARIMIX will design these batchers for a perfect adaptation.
Products: any type of powders, Powders egg, Improving, praline-flavoured ice cream, sugar freezes, frozen dextrose, cocoa, vegetables, etc.... |
|
ProMix Manual Recipe Formulation
…the formulation system for manual batching by weighing raw materials of a recipe using high-resolution scales for stand-alone and multi-user systems. It increases process reliability and transparency.
Automatic Batching System ProBatch+
…allow data management of raw materials, recipes or formulas and materials, and serve as central operating workstations for batching applications in automated processes. |
|
Weighfiller
For automatic and precise dosing of dry, free-flowing products
Liebel Dosing systems LDS 1, LDS 2 and LDS 3 (single, twin, and triple linear weigh fillers) can be used for high precision dosing of powder, grain, granulate and chunky product. This can be herbs, teas, spices, coffee, sugar, wheat, pharmaceutical products, screws, bolts etc …. Our industrial standards guarantee excellent precision together with unsurpassed reliability over many years of life-span. Stainless steel finishings with polished surfaces and a high ground clearance permit excellent cleaning properties.
- Complete finish in stainless steel
- Adaptive controller with self-learning limiter and dosing speed
- 25 memory cells for different articles
- The dosing channels are adjustable to cope with very different product dimensions and attributes, optional also from memory
- Open design, easy to clean
- Also available as “multi-construction“ for high capacities or product mixtures
- Either manual handling or synchronization with packing machines |
|
Spiroflux belongs to the pioneers in the development and the manufacture of weigh batchers by "batch".
As of the beginning of the years 1990, with range SPIROMIX, we equipped with many famous users, in gravimetric measuring, very often to replace the volumetric feeders.
To date, Spiroflux proposes various families of dispensers: SPIROMIX, DPX, MULTIMIX...
Simple with use, robust, reliable and with a very competitive price, these weigh batchers cover all the applications of the plasturgie, and offer many opportunities in the agro-alimentary one.
To proportion from two to six products, with flows of a few kilograms to a few tons per hour,... the possibilities many in proportioning by "batch" or are dépesée continuous. |
|
The anti-bridging system carries out by itself the perfect filling function of the dosing screw, as well as the anti-bridging in the tank.
Some quickly dismantling solutions have been specially studied in order to aid the cleaning of the unit.
The materials have been selected according to the characteristics of the products to be dosed.
Operating principle:
Thanks to a cylindrical tank fitted out with aa anti-bridging device and a mechanical dosing system without air or vibration, you can dose all kind of powdery or granular products.
The flow can be set by varying the speed of the dosing system. The feeding of the dosing system is carried out by the anti-bridging device which at the same time anti-bridges the product in the hopper.
Some examples of treated products:
Flours, cocoa powder, dry fruits, talc, salt, sugar, frozen vegetables, sulphur, metallic oxides, raisins, almonds, pigments, granular products, fibres. |
|
Milltronics weighfeeders from Siemens can improve the accuracy of processing, blend consistencies, accountability, and record keeping. All weighfeeders come standard with a belt weigh bridge and speed sensor. An integrator is required to complete the system.
The weighfeeder is used to deliver an accurate mass flow rate of material. In the majority of applications, material is profiled by an adjustable mechanical shear gate, which fixes the correct material bed depth for a given particle size.
The feed rate is then maintained and adjusted by varying the speed of the belt. However, in some cases the belt speed is constant with rate control (if any) done by a pre-feeding device.
The system consists of three components: weight and speed sensing, integration and control, and the mechanical conveying system.
Using the belt load and the belt speed signals, small incremental totals of weight per time are measured by the integrator and then the flow rate is calculated. The measured flowrate is compared against the desired flowrate and the on-board PID controller makes necessary corrections to the belt speed.
|
|
MULTIDOS weighfeeders are complete weighing systems with extensive variants to adapt to different feed rates, bulk solids properties, and application-specific marginal conditions.
- feed rates: up to approx. 1000 t/h
- main fields of use:cement, steel, and minerals industries
- for granular bulk solids (clinker, gypsum, lump coal)
- for powdery and mealy bulk solids (raw meal, fly ash, filter dust)
- for difficult to handle/sticky bulk solids (clay, marl, gypsum from flue gas desulfurization)
|
|
Metalfab's APB Volumetric Belt Feeder features a ruggedly built, sliding belt assembly designed for highly accurate metering of all types of powders, pellets, and agglomerates. It is exceptionally well suited for feeding of abrasive materials and materials that have a tendency to smear or compress when being fed by a volumetric screw feeder. The APB is also ideal for the high volume requirements of the chemical and food industries.
Features/Benefits
Accuracy
- ±1 to 1-1/2%
Belt Widths/Lengths
- 12", 24", 36" or 48" widths and 36", 72", 108", and 144" lengths respectivelys
Feed Rates
- up to 4800 cu. ft./hr.
Belt Materials
- neoprene (standard); HYCAR®, Nordel®, and Viton® also available
Bearings
- sealed and located outboard to prevent contamination; all units equipped with skirtboards and adjustable belt tensioners
Belt Scrapers
- to prevent material buildup on belt surface and ensure complete discharge of material from the belt (standard) |
|
The indicator of weighing TAD3 is primarily directed towards applications of weighing "Process".
Out of standard, Two exit RS485 MODBUS, Two entry TOR and two exits completely skeletal relays.
In option "Hardware", external modules DIO3 with 8 Entries TOR & 8 Exits relay; external modules ANA3 with analogical exit/16 bits.
In option "Software", a software of proportioning and formulation of 30 receipts and 24 sequences; a software of flow per weight loss for ponderal batchers... |
|
| ... products without technical information |
| |
|
|
Dispensing: Equipment, Accessories
