|
|
Deltrol Controls Boiler Dispense Valves are direct-acting, gravity fed (up to 0.2 bar) valves designed primarily for vending applications. They are used to dispense water or similar media from a boiler tank.
Deltrol Controls offers an extensive standard product line, as well as the ability to design custom models for unique applications.
Contact one of our sales engineers to discuss your specific application
Phone: (01) 414 671 6800
Fax: (01) 414 671 6809
Email: sales@deltrol.com
Website: www.deltrol-controls.com
|
|
The modular self anti-bridging dosing units allow you to dose all kind of bulk products — continuously or discontinuously —– even those considered as difficult.
The interchangeability of the elements that make up these dosers enables them to cover a wide range of large flows and upgradable storage capacities from 50 to 500 litres, according to the requirements.
As a result of a conception that takes into account from the beginning of the process the user requirements, these dosers are simple, modular and reliable. Furthermore, as they are easy to assemble, they are easy to clean when changing products.
These self anti-bridging dosers can be fitted out with a weighing dosing controller. With this element you can obtain a dosing accuracy of ± 0.5%.
These dosing units are specially adapted to products like: flours, cocoa powder, salt, sugar, plaster, kaolin, carbonate, silica.
|
|
iVD - Pasty
Dispensing head for highly viscous media
The dispensing head is the essential part of every dispensing machine. It distinguishes itself by its highly precise, digitally controlled gear wheel pump, which is controlled by the DATRON iServo motor. A DATRON dispensing head is well suited for dispensing all conventional 1C materials, such as silicones and MS polymers in the viscosity range of 100,000 - 1,000,000 mPas. With the special pump design, filled abrasive media can also be optimally dispensed, up to a grit size of 50 µm. The digitally controlled iServo motor is able to position the gear wheel pump to a precision of 1 / 40 000 turn. This allows the smallest amounts to be dispensed in a process-sure way. Non-linear flow properties of the material can be compensated with the software.
|
|
Located in Rochester Hills, Michigan with additional offices around the world, Ingersoll Rand Dispense Systems creates turnkey systems for automatic and manual dispensing applications. Our complete dispensing solutions are configured from standard components to meet customer specific requirements for applications within many different industries.
|
|
Optimum cartridges and retainers bring The Clear Advantage™ to fluid dispensing and packaging processes. Every component has been designed and manufactured to provide superior performance that will help you improve yields and reduce costs.
Optimum cartridges are made of a new polymer that provides exceptional clarity, chemical compatibility, impact strength and dimensional stability. The proprietary Zero Draft™ design ensures that the internal diameter is consistent from top to bottom, with no taper to restrict piston travel and affect process results.
Cartridge pistons are molded to exacting specifications so that they mate perfectly with cartridge walls. Their consistent dimensions and fit prevent blow-by and leakage during filling and storage, and precision wiper edges eliminate waste as fluid is dispensed to reduce production costs.
New, see-through cartridge retainers (an industry first) permit easy visual confirmation of fluid levels. Retainer caps feature a large ergonomic gripping surface, a convenient push-in air line connector, and locking tabs that snap into place with an audible click to confirm proper installation.
|
|
Conformal Coating
When it comes to conformal coating operations, PCB manufacturers are continually challenged by the need to balance throughput, materials and labor investments, while also addressing the regulatory and environmental concerns associated with the process. Traditional methods for applying conformal coatings, such as dipping and air spray, have always been expensive in terms of materials and labor. The expense of solventless conformal coating materials has driven costs even higher.
Asymtek's selective coating systems provide a host of advantages for manufacturers at every level of production from batch to high-volume, in-line processing. These flexible, programmable, integrated coating and curing systems provide precise application of conformal coating and IR/convection or UV curing. A choice of patented dispensing heads allows systems to be configured to meet specific customer coating requirements. The result is cost savings, increased throughput and productivity. In addition, the elimination of VOC emissions delivers a rapid return on investment.
Dispensing System
C-740 and C-741 Century® Selective Conformal Coating System
C-341 Century® Selective Conformal Coating System
Coating Applicators
SC-400 PreciseCoat%u2122 Applicator
SC-300 Swirl Coat%u2122 Applicator (Pictured Top-Right)
SC-105/205 Film Coater Module
Swirl Coat Module
Control Coat Dispensing Module
Productivity Enhancements
Four-Position Tilt Accessory
Laser Fan Width Control
Viscosity Control System
IR/Convection Module
Flow Monitoring
Select Cure UV-6 Cure® Module
Select Cure UV-5 Cure® Module
|
|
Jetting is the best way to dispense many fluids quickly and accurately. It is non-contact and has a high shot-generation rate. . Jetting offers many advantages over traditional needle dispensing to deliver speed, quality, and low cost of ownership. The DispenseJet DJ-9000 can be cleaned in a few minutes, and has fast changeover of wetted parts The DispenseJet DJ-9000 is for use exclusively on Asymtek automated dispensing systems.
Features
- Jets a wide range of fluids including underfill, SMA, encapsulants, conformal coating, UV adhesives and silver epoxy
- Fast - jetting eliminates z-axis motion
- Accurate - jetting is highly repeatable
- Easy to use and maintain
- Small wetted path so less fluid is wasted
- One model handles multiple applications
- Dot diameter as small as 200 micrometers (0.008 in.), compatible with typical 0402 components
|
|
|
EFD produces the highest quality syringe barrels and pistons in the industry. Syringe barrels and pistons are produced in our own silicone-free facilities, where they are subjected to stringent quality control inspections throughout the entire manufacturing process.
|
|
Premier line of stainless steel syringes is offered by KD Scientific. These syringes are a perfect complement for the new KDS 410 high force pump. They are rugged stainless steel syringes . They are an ideal solution when the pressures and the forces are high completely eliminating the problem of breaking glass syringes.
Stainless steel offers good resistance to most aggressive liquids. Wetted parts are #316 stainless steel or Viton. Syringes are availabel in 2.5, 8, 20 , 50 ,100 and 200 ml sizes. Luer lock end fittings are available as well as Swagelok.
|
|
|
Syringes for the dosage of fluid materials, second produced the most modern technological and absolutely free criteria from silicone. Available in an immense range of measures and configurations, comprised that coloring for the more sensitive fluid to the UV. All the syringes are usable or with the manual pistons that bound together to the connections for the dosage telephones exchange automatic rifle.
|
|
Not only the right choice of adhesive is important, but also the right equipment. Handling is possible either directly from the cartridge or with our tank dispensing machine from our original packaging. As a result, you can have an exact dosage of different components, from heavy paste to fluid paste.
Our products:
Cartridges
Disensing needle adaptor
Steel needle, economy, luer-lock, flexible, tapered...
Static-mixer
Stopper, caps
Cartridge adaptor
|
|
TS-350 is a system types them for the dosage of the fluid of any degree of viscosity. Precise and poured it offers them the possibility memorizzare until to 10 various programs, concurring reproducing sequences of points or lines of dosatura with accuracy and repeatability. It includes the regulation of the empty one in order to eliminate the problem of the gocciolamento during the dosage cycles.
Modern and winning the design is studied in order to occupy minor the space possible on the workbench and also in order to concur the impilamento more unit over the other. An advanced system of management of the presisone and the empty one, bound together to the timer types them, assures consisting and ripetibili dosages reducing remarkablly the waste of materials.
Available in 2 versions in order to operate to various pressures of exercise: 0 -100 psi for applications of general character and 0 - 15 psi (bread-board TS-355) for specific applications with fluid to lowest viscosity. The systems are ready to the use in any part of the world thanks to the power supply universal and are supplied with the accessories.
Systems DX can control the following valves:
Valves to crushing of tubetto
Bobbin valves and miniums bobbin
Needle valves and micro needle
Diaphragm valves
|
|
DOPAG electronic metering and mixing systems, based on the VOLU-MIX principle, are built in modular from and are custom designed.
These systems are used for:
• materials with extreme mixing ratios
• materials with microballs
• low working pressures
Depending on the specific application, various basic configurations are available.
|
|
|
The Adept AnyFeeder provides an economical alternative to well-known, conventional part-feeding techniques. When combined with an Adept robot and Adept vision guidance, the Adept AnyFeeder provides integrated flexible part-feeding. Its flexibility in feeding small parts of various size, shape and material allow for fast line changeover and significantly reduced tooling costs, to give you a crucial competitive advantage.
|
|
Gericke has developed a special feeder (volumetric and gravimetric), which is able to dose sensitive products like dry and half dry apricots or strawberries.
This feeder, based on the GDU series is very well adapted to the difficult characteristic of sticky and in the same time sensitive bulk materials.
Due to the modular structure of the Gericke feeders with various combinations there is the opportunity to make quickly adjustments for new recipes.
|
|
Smart Weigh Belt (SWB) Feeders are a key component used for the weighing of a variety of bulk solids in a wide range of processes. The most typical application is for feeding / weighing into a continuous process. The process material may enter the Smart Weigh Belt directly from an upstream hopper or via a prefeed device like a screw feeder.
View Catalog Page
The Smart Weigh Belt can be used as a feeder, batcher, or meter. By utilizing different control software, the Smart Weigh Belt can be used to feed material into a batch system. For inventory control or metering, the Smart Weigh Belt can be placed into a constant speed configuration to measure or totalize the amount fed into a process.
The Smart Weigh Belt offers gentle material handling, an important benefit compared to other feed devices like a screw feeder when handling the following materials:
Flakes (e.g. corn flakes, bran flakes, and wheat flakes)
Lumpy bulk solids (e.g. vegatables and fruits)
Shear sensitive materials (e.g. corn flakes, frozen vegetables and frozen fruits)
High abrasive bulk solids - due to a low friction coefficient applied to the materials
Low melting bulk solids (e.g. fat flakes)
|
|
Fine dosing short-cut feeder is a good and economical solution for conditioning applications, when reduction of dosing time dosing is a must.
These feeders are controlled with motor rpm and outlet section of extractor. For batch process MCPI’s “Short-cut system” is a mechatronic solution which ensures a perfect control of the extractor movement with repeatability below 3/100 sec, to ensure quick and accurate feeding.
The very small overshoot value of these feeders, associated with a sharp control of extractor movement, are the main points to explain the so high level of performances in terms of dosing time and accuracy.
With the different versions of the range, all specific requirements get answers: With Fine dosing short-cut feeder it possible to reach very short dosing time (from 0.2 sec) and feeding quantities from 0.1 gram to many kilo grams.
Design of these feeders is made in agreement with drug and food industries requests for cleaning.
For more details, see enclosed data sheets
|
|
With over 125 years of combined experience in the application, engineering and manufacturing of heavy-duty apron feeders, Metso Minerals is truly the worldwide leader in the supply of this equipment.
Whether your application is best suited for our standard line of apron feeders or our "world class" apron feeder (which combines the best features of NICO apron feeder and Stephens-Adamson's apron feeder), you will get the most rugged and reliable machine available for your operation.
We have been serving customers since 1889 in many diverse industries. Our respected brand and trademarked names include:
Stephens-Adamson, NICO
|
|
These scales incorporate all the features PRECIA-MOLEN has developed during its years of experience in the field of bulk weighing. The proven concept of one basic design for multi-purpose applications in intake weighing, transshipment weighing and out loading has been maintained in the ABS hopper scales.
Dynamic bulk weighing
Dynamic bulk dosing
ABS hopper scales
|
|
The device DDS 400 is a mechanical silo discharge and metering unit for powders stored in silo. It can be installed below any silo fitted with a 60° constant angle conical outlet.
The storage volume can be over 300 m3.
It caters for throughput from a few l/h up to 15 m3/h according to the product.
Its design provides many possibilities :
· fabricated sheet steel (mild or stainless steel)
· constant or variable throughput
· single or double metering conveyor, rigid or flexible
· fixing flange to the standard NP 10 (NB 200, NB 250, NB 300).
ADVANTAGES:
Mechanical extraction, without air or vibration, therefore without contamination or compaction of the product.
Easy fitting under the silo thanks to the flange standard NP 10.
The product metering is independant of the load of the silo.
Total silo emptying.
Low power consumption.
Totally sealed and dustproof, quiet in operation.
Ease of installation : rotating flange, adjustable length, flexible or rigid conveyor, assembly rapidity.
Ease of adaptation of transfert device.
Double conveyor with independant use.
Reduced overall dimensions.
|
|
Flexibly usable at semi-automated or fully aoutomated workstations
Universal dispensing from pressure tank, Euro-cartridge or small cartridge
Variable dispensing times can be set permanently on the device or per cycle through external controls
Vacuum of low-viscous media in small cartridges prevents dripping Individual combination of various, systematic components enables the customer to use remarkable technologies.
Illustrated:
DELOMAT 100 with pressure tank, metering valve and foot pedal
DELOMAT 400
With all the advantages of DELOMAT 100 and extra
flexibility
Variable media supply of up to four independent work
stations, either fully or semi-automatic
Free programming of dispensing-, cycle-and delay times of
four channels
Separate control air outputs for additional units, e.g. slewing
mechanism, pneumatic jack, light-guide lamps
DELO dispensing units comply with the EMV guidelines and have
the CE label.
|
|
Features:
With READY feeder the centralized plant may be easily increased up to 64 machine by simply connecting the motherboard with a twinex cable to all the daughterboards installed on the cyclone assembled on each machine.
|
|
Used for loading powder, granules, or other unwieldy products, like: Flour, cocoa powder, ground coffee, milk powdered, cement, pharmaceutical products, veterinary products, paints, dyes, pepper seeds, and more.
VISEN-TYPE VOLUMETRIC AND/OR GRAVIMETRIC FILLING MACHINE
For powder and granules
Delivering 50 to 50,000 cm3; (Visen D) and 10 g to 15 kg (Visen E2)
Common features:
Robust steel or stainless steel build powered by a motor with a brake or variator.
The filling system is comprised of a vertical screw conveyor, with a diameter suited to the quantity and density of the product you plan to use it with, varying from 10 to 85 mm
Parts in contact with your product in one version are 304 L stainless steel.
This machine can be synchronised with a bagging machine, boxing machine, step-by-step conveyor, etc.
Available in 2 versions:
Visen-D volumetric machines, on stands or for fitting onto automatic machines
Visen-E gravimetric machines, only on stands.
|
|
The DHVP has been designed for products that can be dosed neither by pumps (because they are not liquid enough) nor by standard dry products dosers (because they are too wet): matter blocks, cold fats, filter press cakes.
For your blocky products or in portions, this doser will guarantee a constant and accurate flow without having to break clods.
Operating principle
Three horizontal solid screws drive the fat into the pump and three vertical screws load these horizontal screws.
The latter feeds the fat into an eccentric helicoidal gear pump.
The fat, that has entered the system en bloc, flows out of the doser continuously, with an excellent dosing accuracy, since the pump is feeded constantly.
|
|
DATRON dispensing systems
High precision and process security at short set-up and cycle times
The increasing economic demands in the area of dispensing require precise, process-sure and flexible system engineering. DATRON dispensing systems were specially developed for industrial adhesive, sealing or EMC applications and have earned customer confidence with their high performance and high volume consistency.
DATRON dispensing systems offer the highest possible process security and flexibility with its combination of electronic dispensing head with the patented control engineering. The use of special software technology allows speed-independent dispensing, which ensures high dispensing speeds and short cycle times. Also, these systems work independently of pressure and viscosity, so that process parameters don't need to be adjusted due to modified manufacturing conditions. In connection with the accessories developed for dispensing tasks, DATRON offers system solutions from one source to guarantee optimum quality for your manufacturing.
|
|
|
DOPAG components are used in various areas of industry to apply low to high viscosity media especially when high precision and exact repeatability of the dispensed volume is required.
|
|
|
EFD offers a wide range of valve systems for dispensing accurate, repeatable amounts of almost any assembly fluid, from thin solvents and adhesives to thick RTV sealants and brazing pastes.
|
|
|
|
Dispensing: Equipment, Accessories
