|
|
| Products 91 to 120 of 216 |
For applications that do not require the flexibility of a robot, mta automation ag proposes a simple dispensing station.
The modularity of our slides and standard elements enables to find a solution adapted to the application.
The programmable electronic control allows the dispensing axes and values to be set.
The stations can be integrated into production lines for various dispensing applications.
|
|
The Mikros Dispensing Pen minimizes waste when making microdeposits of 2-part epoxies and other assembly fluids with short working lives.
The unique 0.25cc reservoir tips are smaller than standard dispensing components and reduce production costs by allowing fast-curing materials to be mixed in smaller batches and consumed before pot life expires. The tips are available in three different sizes to handle a range of fluids and dispensing applications.
When used with an EFD air-powered dispenser, the Mikros Pen will produce consistent fluid deposits as small as 0.007" in diameter.
|
|
FEATURE
- Unique eight plate position, small footprint design
. Space savings for all applications
. Seamless integration into a variety of Velocity11 and third party automation systems
- Simultaneously pipette while other plates changed
. Impressive throughput and significant reduction in assay time
- Pipetting range of 100 nl to 200 ul
. Save on costly reagents and compounds
. Miniaturize your assays with confidence
- Pipette Heads are easily interchanged in < 2 minutes
. Flexibility: One system can scale to handle a variety of applications
. No service person required for a head change.
|
|
60% smaller and 70% lighter than typical dispense valves, the 702 Series is ideal for applications where space is tight or installation on movable arms where size and weight must be considered.
For use with:
- UV- and light-cure adhesives
- Resins
- Solvents
- UV coatings
|
|
The DOPAG ELDO-MIX range of gear pump driven metering and mixing systems are built in modular form and are custom designed.
Depending on the specific application, various basic configurations are available.
|
|
The MICRO-MIX range of systems are compact, pneumatic or electrically driven piston pump metering and mixing systems.
They are used to either continuously apply or meter shots of low to high viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:4.
The material can be abrasive as well as filled.
The material is either supplied from pressure vessels or by feed pumps.
|
|
The VARIO-MIX range of systems are solvent free, compact, pneumatic or hydraulically driven piston pump metering and mixing systems.
They are used to either continuously apply or meter shots of low to high viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:4. The material can be abrasive as well as filled.
The material is either supplied from pressure vessels or by feed pumps.
|
|
RTM Attachment Included For Direct Injection .
Available in 2 Different Pump Ratios To Fit Your Exact Needs.
The 5:1, and 9:1 Systems Are Built To Last and Feature A
3.7 GPM Stainless Steel Fluid Pump.
System Is STANDARD Internal Mix; Complete With Catalyst Alarm &
Programmable Resin Monitor - AT NO EXTRA CHARGE !!!
With The Precision Of The "Phoenix 45" Airless Air-Assist Gun,
The "Atlas" System Is THE Choice For Your Standard-Volume Application.
The System You Need At The Price You Deserve...
This System Processes Your Neat Or Filled RTM Resin With Absolute Ease!
System Features:
- Phoenix 45" Internal Gun
- RTM Lite or RTM HP Nozzle Assembly
- Resin Pump Quick Pin Disassembly
- "UltraClean" Take Apart Accumulator
- Long Wearing Pump Seals
- "OptiSlave" Catalyst Slave System
- Micro-Adjustable Dispense Percentage
- Stainless Steel Catalyst Pump
- "No-Leak" Upper Seal
- Hardened Components
- Easy Access Control Valve
- Several Mounting Options Available
- Spare Parts Kit w/ extra Mix Nozzles
- 1 Year Warranty
|
|
Characteristics of the motorised volumetric dispenser for mono-component products (MVD):
- Simple setting of the quantity to be dispensed via a regulator ring (manual)
- Adjustable dispenser volume from 0.1 mm³ to 100 mm³
- Volumetric dispensing without valve
- Ceramic dispensing piston and cylinder (Al2O3)
- Repeatability of the dispensed volume > 99%
- Liquid or viscous products dispenser
- No seals (no wear-and-tear)
|
|
The SILCO-MIX range of systems are compact, pneumatic or hydraulically driven piston pump metering and mixing systems.
They are used to continuously apply medium to high viscosity multiple component silicones with a fixed mixing ratio of 100:100.
The material can be abrasive as well as filled.
The material is supplied by feed pumps from original drums.
|
|
These multi-spiral powderers have been specially designed for extracting, dosing and distributing in a constant and uniform manner, powdery or granular products on a retrieving element (belt conveyor, plate, etc.)
Treated products: grated cheese, flaked almonds, candied fruits, powders, culinary herbs, raisins.
|
|
Precision needle valve applies low-viscosity fluids in accurate, repeatable amounts. Because the stainless steel needle seats in the tip adapter, there is virtually no dead fluid volume between shots.
For use with:
- Accelerators
- Marking inks
- Silicone oils
- Solvents
- UV-cure adhesives
|
|
Characteristics of the numerical volumetric dispenser for two-component products (NBD):
- Simple setting of the dispensing parameters via numerical controller
- Adjustable dispenser volume of 2 x 0.1 mm³ to 1250 mm³
- Volumetric dispensing without valve
- Ceramic dispensing piston and cylinder (Al2O3)
- Repeatability of the dispensed volume > 99%
- Liquid or viscous products dispenser - No seals (no wear)
- Mixing by dynamic or static mixer
- Low-volume dynamic mixing chamber (interchangeable)
- Programmable dispensing ratio
|
|
Volumetric dosers in a flexible configuration
Single or double-station volumetric dosing units, with a throughput ranging from 0.005 up to 150 kg/h. Designed to dose masterbatch, additives and regrind into the plastification screw.
Customer oriented solutions:
A single unit covers a wide production range:
- the rich selection of screws and gear boxes allows multiple requirements to be met
Utmost versatility of use:
- it is possible to easily transfer the dosing station on other IMMs and start up production immediately.
Minimised operator interventions
- cleaning and maintenance operations are simple and require just a few minutes.
No material wastage
- The space-saving design of the central block results into no material wastage at the initial and final phases of the production job
Maximum ease of use
- The combination of the construction solutions adopted and the user-friendly software ensures maximum ease of use
|
|
Versatile, inexpensive manual dispensers are ideal for touchups, low-volume assembly and field work. They can be used with all EFD syringe barrels, pistons and tips.
The DispensGun® features 10:1 mechanical leverage that makes it easy to dispense thick materials like greases and silicones without hand fatigue. A clean cutoff when the trigger is released prevents oozing between fluid applications.
Designed for use with EFD syringe barrels and pistons, HPD Hand Plungers provide a clean, comfortable alternative to squeeze bottles and hand syringes.
|
|
Versatile, inexpensive manual dispensers are ideal for touchups, low-volume assembly and field work. They can be used with all EFD syringe barrels, pistons and tips.
The ReliusTM DispensGun® features 10:1 mechanical leverage that makes it easy to dispense thick materials like greases and silicones without hand fatigue. A clean cutoff when the trigger is released prevents oozing between fluid applications.
Designed for use with EFD syringe barrels and pistons, Relius Hand Plungers provide a clean, comfortable alternative to squeeze bottles and hand syringes.
|
|
The 2800 Series positive displacement dispensers are ideal for applying uniform amounts of two-part epoxies and other fluids that change viscosity over time.
Compressed air is not required%u2014instead, these electrically operated units use stepper motors and patented technology to advance and retract a piston inside the syringe barrel. They will produce accurate, repeatable deposits, regardless of changes in fluid viscosity or temperature.
|
|
EFD's Ultra® 2800 Dispensing System is perfect for applications that require precise metering of assembly fluids with changing viscosity or where a specific flow rate is necessary.
The system features a unique, patented technology that gives the user precise, repeatable results %u2014 regardless of changes in fluid volume, viscosity and temperature. This technology eliminates the need to adjust settings throughout the syringe barrel dispensing cycle, including the need to compensate for changes in fluid viscosity.
The 2800 System is electro-mechanically operated and does not require the use of compressed air. A powerful stepper motor is contained in the benchtop controller, keeping the handheld drive cable lightweight and easy to use .
|
|
|
DOPAG components are used in various areas of industry to apply low to high viscosity media especially when high precision and exact repeatability of the dispensed volume is required.
|
|
Weighfiller
For automatic and precise dosing of dry, free-flowing products
Liebel Dosing systems LDS 1, LDS 2 and LDS 3 (single, twin, and triple linear weigh fillers) can be used for high precision dosing of powder, grain, granulate and chunky product. This can be herbs, teas, spices, coffee, sugar, wheat, pharmaceutical products, screws, bolts etc …. Our industrial standards guarantee excellent precision together with unsurpassed reliability over many years of life-span. Stainless steel finishings with polished surfaces and a high ground clearance permit excellent cleaning properties.
- Complete finish in stainless steel
- Adaptive controller with self-learning limiter and dosing speed
- 25 memory cells for different articles
- The dosing channels are adjustable to cope with very different product dimensions and attributes, optional also from memory
- Open design, easy to clean
- Also available as “multi-construction“ for high capacities or product mixtures
- Either manual handling or synchronization with packing machines
|
|
Powdering and dosing machine for dry ingredients, based on an exclusive patented principle : Alternate accelerations with horizontal direction.
- Good sprinkling effect on large width : up to 1500 mm.
- The output flow can de split in numerous tracks, the width of each track can be easily changed.
- High dynamic of the system : min dosing time 0.5".
- High dosing stability on the width with good repeatability (Standard variation < 5%).
- Built according GMP rules.
- Can cope with many types of ingredients.
Application : foods, drugs, chemical industries.
- No risque of injury for operators.
- No wearing parts, no risks to damage the powderer if metallic parts are in the ingredient.
For more details see pdf data sheet
Fine dosing,: because every gram is important !
|
|
Saupoudreurs PARIMIX were especially studied to extract, proportion and distribute in a constant and uniform way products out of powder or were granulated on an element of recovery (conveying belt, carpet, plate, etc).
This poudror allows to carry out the sapoudrage products such as grated cheese, the spilt almonds, the candied fruits, the nuggets or chips of chocolate, the powders, the grasses, the dry grapes, sugar freezes.
|
|
Precision Dispensing Pump for UV Sensitive Fluids
Fluid Metering, Inc. of Syosset, NY
announces their new VMP Electronic
Variable Displacement Metering Pump
for accurate dispensing of UV (Ultra-
Violet) sensitive fluids.
Typical fluids that fall into this category are,
UV curable adhesives, UV coatings, and
photo lithography chemicals.
The VMP Variable Displacement
Dispenser is a fully programmable
dispensing system, which utilizes FMI’s
patented CeramPump® Valveless piston
pump design. A precision stepper motor
controls the pump speed.
However, what makes the VMP truly
unique from other FMI dispensers is the
addition of a second stepper motor, which
electronically adjusts the piston
displacement. This provides ultra-fine
dispense adjustments through varying of
piston stroke length.
The VMP can be programmed for a variety of functions using a user-friendly Touch Screen Interface (TSI) which can control up to 16 pumps on a single bus. Up to 128 metering devices
can be controlled using a PLC or computer.
The VMP will store up to 100 programs letting you change between setups on the fly. For UV applications, the pump head is made from either 316 stainless steel or opaque PVDF to isolate UV light from the process fluid as it travels through the pump head.
Typical applications include dispensing of UV curable adhesives for medical component assembly, photo resist for printed circuit and semiconductor manufacturing, and UV adhesives & coatings for DVD manufacturing.
|
|
The ingredient is dosed in a small container fitted on an accurate load cell.
The integrated batch controller optimizes coarse and fine feeding with automatic tolerance control.
Fine dosing concept allows a ratio between coarse/ fine feeding over 30.
This figure is a key point to reach fast dosing process and accuracy.
In automatic version, at the end of dosing stage the container rotate 360°. The ingredient is then emptied to the application point.
The ingredient can be as well, feed directly in the final container or box, positioned (manually or automatically) on the load cell table.
Design of these feeders is made in agreement with drug and food industries requests for cleaning.
|
|
The microdispensers DMP range has been specially designed for a very highly accurate microdosing of all kind of powdery products. They are often used for accurate filling operations with powders.
Its operating principle makes possible a high rate dosing.
Dosing from 0.05 to 150 grams
Accuracy: ±1%
Rate: up to 1 dose per second
|
|
A shaft encoder records every hundredth of a turn, and a preselection counter is used to set the number of turns corresponding with the volume - and hence weight - you need.
Once this machine reaches the number of turns needed, the screw stops, and the filling system is ready for a new container.
|
|
C-718 Series
The Century® C-718 from Asymtek is an advanced dispensing system that provides an unmatched balance of cost-effectiveness, performance, accuracy and flexibility for use in mid-range dispensing applications. Equipped with the efficient, non-contact DJ-9000 DispenseJet® valve, the Century C-718 dispensing system delivers sustained throughput at close to the maximum speed of its X-Y positioning table.
Features
Cost-effective SMT dispensing for mid-range production environments
Adhesive dispensing throughput of up to 20,000 dots per hour using the non-contact DispenseJet valve
Robust production-proven positioning system
Fully-programmable using powerful Windows-based Fluidmove® software
SMEMA compatibility for in-line processing
|
|
NEMO® Dispensers guarantee the highest level of precision in dosing and reproducibility. For this reason, NEMO® Dispensers and NEMO® Hand Dispensers are employed in a great variety of applications and industries.
Such as:
- in vehicle manufacturing
- in the electronics industry
- in renewable energy resources
- in the pharmaceutical and foods industries
- in other adhesive and sealing industries
Features of NEMO® Dispensers and Hand Dispensers
- very gentle conveyance
- compact dimensions at a high number of stages
- large cross sections of inlet
- conveyance also of compacted products
- conveyance of solids
NEMO® Dispensers and Hand Dispensers offer you:
- conveyance volume in proportion to rotation speed
- high dosing precision
- drip-free dosing
- constant low-pulsation conveyance
- high efficiency
- low life cycle costs combined with easy serviceability
Everything from a single supplier
Our broad product portfolio makes it possible for us to design complete dosing systems for you. Take advantage of our many years of experience and know-how.
|
|
Features:
- Provides a low-cost means of dispensing fluids accurately, to better than 1%.
- Ideal for repetitive and volumetric dispensing of acids, solvents, and aqueous solutions.
- FMI's unique low-dead-volume, valveless pump heads.
- High accuracy, synchronous motor drives.
|
|
|
|
Dispensing: Equipment, Accessories
