|
|
A 20 years tested instrument to perform aseptic and simple homogenisation.
The more compact and rugged instrument in the market, but now with a lower price.
The FIRST in having a compact design. The smallest top bench space.
The FIRST in using springs to lead the paddles. Longest life.
The FIRST one that made the homogenizing technique affordable.
The ONLY one that was twice copied (piece by piece) and never equalized. |
|
The Vibratory Disc Mill RS 200 is suitable for the extremely quick, loss-free and reproducible grinding of medium-hard, hard, brittle and fibrous materials to analytical fineness.
Grinding sets made from hardened chrome steel, tungsten carbide, agate and zirconium oxide permit a wide range of applications. The RS 200 is primarily used for sample preparation for spectral analysis.
Product Advantages:
- powerful Stabilized-Plane-Drive
- excellent reproducibility
- analytical fineness in seconds
- 1-button operation with graphics display
- 10 parameter combinations can be stored
- grinding tools in 5 different materials
- quick-action grinding set clamping device
- agate recognition for automatic speed reduction
- sealed, noise-insulated grinding chamber
- maintenance-free, CE-conforming design
- 2 year warranty
|
|
| The Rapid 10 Series is a low-speed - just 25 rpm - very quiet granulator ideal for grinding hard, thick-walled and/or brittle injection moulding sprues and rejects at low capacities. The very slow speed helps to minimize noise, frictional heat, and component wear and tear. |
|
All ingor sand mills are efficient ultra micro wet grinding and dispersing machines being widely used for producing: coating, dyestuff, paint, ink, medicine, magnetic powder, sensitive film, pesticide, cosmetics, paper making and so on. Ingor sand mills have high efficiency, and can work continuously producing less pollution.
There are three specific models for different applications and products:
- Standard horizontal mills
- Refrigerated horizontal mill. This equipment has a grinding chamber with refrigerating jacket suitable for products sensitive to temperature.
High viscosity product horizontal mills. Suitable for products having a high viscosity and temperature sensitive. |
|
"M" SERIES SHREDDERS
Alongside the traditional 4-shafts equipped shredders, I.S.V.E. proposes a series of single-shaft equipped shredders with pusher-drawer.
These machines are purposely studied to shred thick materials and highly resistant to cut such as plastic blocks and sheets, various types of timber, paper, extruded polymer pipes, etc.
Operation drawings:
A pusher-drawer with hydraulic drive pushes the material towards a tools-holder roller which carries out the first breaking and thanks to its rotation and to the COUNTER-BLADE action makes a first breaking and the shredding of the product.
The product passes through a drilled screen, which allows establishing the final sizes of the material. |
|
Model: ECO 3000
Grinder recommended for: Big Quantities of Heavy– Duty and Very Large Size materials
Installed Powers (KW): 250/315
Drive: Mechanical or Oil-Hydraulic
Rotor diameter: 800mm
Hopper dimensions:
-Length 1300mm
-Width 3000mm
Weight: 26000 Kg
Possibility to apply (optionals):
- unloading belt conveyors
- metal and non metal selecting system
- screen for the calibration of outlet material. |
|
Hosokawa Micron Powder Systems offers a broad range of size reduction mills to handle all fine grinding industrial mineral applications. The selection includes conventional ball mill /classifier systems with new high-tech features that extend the fineness range to below D97 at 5 microns. For softer mineral fillers such as PCC, talc and fine kaolin we offer both the renowned Mikro-ACM and Mikro-LGM air classifier mills.
Our product offering includes the new Alpine AFG /TTC opposed fluid bed jet mill. The TTC version is the new high speed - high surface area classifier wheel. This single wheel classifier operates at speeds up to 120 m/s and often replaces multiple wheel classifiers with the same or better performance. The Alpine AFG/TTC is the mill of choice for fine zirconia, exfoliating talc, barium sulfate, ATH and graphite |
|
As a reaction to the increasing, worldwide requirements of the good manufacturing practice (GMP), NARA improves its pharmaceutical mill, SCM (Super Clean Mill) continually. It is based on the principle of a conventional pin mill (impact type pulverizer), which suits the requirements of GMP in the pharmaceutical and the foodstuffs industry.
The next generation mill, NARAs New SCM, is characterised by disk-structured components, which are positioned on bars. By the release of handwheels only, the complete assembly can be dismantled easily and by one person. The low heat increase during milling as well as the easy adjustment of the particle size by screen insets, the simple structure for fast and easy cleaning and maintenance are some of the specific features of this machine. The mill is equipped with various constructional elements, to prevent contamination e.g. the execution of the air-purged shaft sealing, the direct drive and the spatial separation from milling area and drive unit.
|
|
Mineral Processing
Building material plant
Russia
1x roller mill WM1012
rotor diameter 1000 mm
rotor width 1200 mm
input 5-20 mm, 5-40 mm
output <8 mm
limestone
clay 60 m³/h |
|
Plain and tooth rolls for intermediate size reduction.
Labtech Essa rolls crushers are designed for rapid, controlled size reduction of ore, mineral or rock prior to metallurgical testing or further milling or grinding. They are typically applied in laboratory or pilot plant applications after primary production of the infeed material in a jaw crusher or similar. The nipping action of two off same diameter individually powered contra-rotating rolls produces an ideal crushing environment for a wide variety of materials. Product sizing is controlled by an (adjustable) gap setting between the two rolls. One roll is heavy duty spring mounted as protection against uncrushable material attempting to pass between the rolls. Roll crushers operate with a minimum of dust generation and produce a material with a tight size envelope containing a minimum of fines. |
|
For printing inks, paints or tanning processes having variable viscosities. The roller surface is made of double-metal cold and hard metal alloy having high resistance and shock-absorbing qualities. The transmission system has a multi-line chain wheel allowing initiating the process in a smooth, stable running and noiselessness way.
The roller speed can easily be adjusted manually. The overload prevention device is safe and reliable. The standard configuration is manual, water-cooling and horizontal setting. The roller is made of double-metal cold and hard alloy, being not suitable for the grinding of corrosive materials. |
|
Rotoplex large scale granulators are characterized by their extraordinary performance capacity, economy, and operating reliability. The Rotoplex features a cross-scissor-cut rotor which offers process technological superiority, saves energy, increases the service life, and improves the material feeding characteristics. Besides the classic field of plastics size reduction, Rotoplex large scale granulators are employed for all types of cuttable material- even those which cause a high degree of wear.
|
|
The Silverson Multishear Mill has been specifically developed to meet the requirement for a high speed machine which eliminates, as far as possible, the need for conventional media or colloid milling.
The Multishear Mill differs from Silverson's standard In-Line mixers in that its rotor consists of three or four sets of finely machined teeth running against three or four sets of stators.
This multistage rotor/stator workhead provides intense high shear with a three stage machine performing over 3 million individual shearing actions per second and a four stage machine over 5 million per second.
This high degree of shear eliminates the need for conventional media milling, except on the hardest of solids. However, even if conventional milling is still needed, rapid pre-milling by the Silverson Multishear Mill will enable the product to be passed through the conventional media mill at a much faster rate. This is because most media mills work best when fed with a product of a uniform and low particle size. The total process time therefore will still be only a fraction of what would be needed by conventional methods alone.
Typical applications
- Pigments
- Dyestuffs
- Presscakes
- Titanium dioxide
- Bone slurries etc.
|
|
RSP 15 Series low speed granulators, characterised by a 150 mm diameter rotor with multiple staggered blades and length ranging from 150 up to 375 mm. The models can be equipped with two different types of hopper – with inlet height at 1.23 m or as an alternative at 1 m – both ideal for the different kinds of feeding.
RS 26 and RS 30 Series granulators, characterised by an open rotor, with diameter of 260 and of 300 mm, with single blades. Ideal also for the recovery of 1.5 m pieces thanks to an optional extension to be applied on the hopper.
Versatility and robustness are the main characteristics of the Piovan RSP20 granulators. The specific design of the rotor allows maximum performance: a quality regrind with minimum energy requirements. Maintenance and cleaning are quick and safe for the operator. |
|
SWP series plastics crushers are primarily used to break up every kind of thermoplastic and rubber, such as plastics profile material, tube, stick, silk thread, film, discard old rubber product. The granule provides the extrusion and injection directly.
Type SWP-450 plastics crusher is ideal equipments that recover large type profile and tube material, it characterized by big crushing ability, high yield and stable work function. Automatic absorber increases the automation degree of this machine.
The type SWP-630 plastics crusher is a kind of special equipment used to break large plastics hollowness container, big piece materials in die, plate material |
|
The number one solution for compacting your EPS (Expandable Polystyrene) minimum 20:1 measured on weight.
Mil-tek EPS Model 900:
• Capacity: 15 kg. per hour
Mil-tek EPS Model 1800:
• Capacity: 80 kg. per hour |
|
Primary Grinder for Pneumatics
Model: K .128. S (used machine - Under Power)
Power: 2 x 75 KW (2 shafts)
Drive: Oil-Hydraulic
Dimensions:
-Depth:1700mm
-Length:3500mm
-Heigth: 1800mm + support structure 1900mm
Weight: 20700 Kg |
|
| Sweco® Vibro-Energy® Grinding Mills are the most versatile line of mills available today for fast, low-cost particle size reduction to sub-micron range. Vibro-Energy grinding action achieves higher output per input horsepower; precise control of size and distribution. Product contamination from media and lining wear is virtually eliminated. Maintenance costs are low because of few moving parts and replaceable linings made of abrasion-resistant metal, ceramic or elastomers. |
|
| ... products without technical information |
| |
|
|
Grinders
