|
|
In its standard range of hydraulic tensioners, SKF Equipements offers no less than 6 different types of tensioners with characteristics which are both different and complementary.
The product range includes multi- purpose, powerful, thin, compact and other types of tensioners, covering a wide range of bolt dimensions from M8 to M160 (5/16 to 6), and able to apply pre-tightening loads ranging from 50 kN to 8500 kN.
|
|
Injection Plungers for Pressure Die Casting
Injection plungers for pressure die casting of Al, Zn, Mg and Cu alloys are made of grey cast iron,
steel and, more and more of special copper alloys such as Brocadur CCNB and Brocadur CNCS.
The advantages of injection plungers made of special copper alloys are as follows:
- extraordinary adjustablity
- perfect sealing
- low consumption of lubricant
- good cooling due to high temperature conductivity enabling high working cycle rates
- long life of plunger
- long life of casting chamber
- increase of casting capacity
- reduction of casting costs[ |
|
| Where air is required to affect static removal at a distance and compressed air is not available, the Ion Blower can be used with either the standard Model RN static bar or the extra powerful Model VS bar. |
|
| Plastics attract dust due to static electricity. The dust particles stick firmly to the surface, which makes it difficult to remove them. Due to their configuration, numerous plastic products have to be neutralised from a distance. For this purpose, SIMCO has developed ionising air blowers. The emitter points of the anti-static bar ionize the air which is blown towards the electrostatically charged object. The part is then neutralised by the ionized flow. |
|
| Ionizing air guns neutralise static charges on several materials and clean the surface using ionized compressed air. Neutralising the static charges makes it easier to blow-clean the surface and prevents dust and dirt particles from being reattracted. The compressed air used for this purpose must be free from oil and water. The guns are connected to a power unit which supplies the required high voltage. |
|
Electrostatic charges occurring during production processes often cause
severe disruptions, reducing production speed and product quality.
The R36 ion blower nozzle and the ion blower pistol PR36 have an outstanding range effect.
The ion blower nozzle is used in fixed installations; the ion blower pistol is
designed for manual use.
Charged surfaces which attract dirt particles can be effectively discharged with the help of the ion blower nozzle resp. the ion blower pistol, keeping the surfaces free of dust before converting and finishing.
The compact design of the new ion blower nozzle and its high efficiency allow a wide variety of applications.
The benefits:
high degree of discharging efficiency
compact design
adapter design
small dimensions
easy installation
flow-optimized air nozzle |
|
Highlights HLWQE 1
- No maintenance costs for 5.7 years! (50,000 h useful life at 700 mA - Decrease in luminous flux about 70%)
- Hart-coated aluminium housing for improved wear and corrosion protection
- Protection from electrostatic charge and polarity reversal
- Choose between spot or area light
- Special lens holder for maximum luminance
- Insentive to vibration and temperature changes
|
|
FAZINATION GET TO THE POINT.
It is a lighting example of extraordinary design paired with perfect funktion - the diva 900.
Highlights diva 900:
- innovative LED technology - made usable as area light thanks to innovative reflector geometry
- four 3 W high-performance LEDs
- extremely economical
- high life time of the LEDs: 50,000 hours |
|
This is the enhanced 2nd generation of IAIs most polular series of linear actuator. The series incorporates a number of major design innovations which have greatly enhanced the capability of our ballscrew actuators.
Increased overall rigidity and frame strength
- Minimised overall length and smaller footprint
- AC servo motor with optical encoder
- Four different sizes
- Low, medium and high speed type
- Maximum stroke : 2,500 mm
- Maximum horizontal payload : 150 kg
- Maximum speed : 2,000 mm/s
- Repeatability : +/-0.05 mm ("P" precision design: +/-0.02 mm)
|
|
Advantages:
* combination of 6-axis robot with state of the art linear module
* precise, hardened LM guides
* high stiffness achieved by steel construction
* high flexibility in handling of parts
* excellent value for money
Technical characteristics:
* hardened, play free LM guides in size 35 - 55
* hardened rack and pinion drive
* felt pinion for lubrication of the rack
* central lubrication system for complete axis
* repeatability less 0.1 mm
* easy floor adjustment
* driving speed over 2m/sec
* with covers on request |
|
For processes that coat broad physical substrates or that need to achieve extremely high throughput, Angstrom Sciences offers the perfect solution. Our linear magnetrons deliver the same unparalleled performance that has made Angstrom Sciences the world leader in magnetron sputtering technology for the past two decades.
The Angstrom Advantage is fully incorporated into each of these state-of-the-art production tools. They operate at very low pressure and exceptionally high power, and they provide the perfect balance of uniformity, utilization and rate for any application.
Angstrom Sciences provides a full range of configurations to meet your production needs.
Sizes
Width 1.5 16 38mm 407mm
Length up to 20ft up to 6m
Cathode Styles
Indirect cooled
Direct cooled/Indirect cooled
Ultra High Vacuum
High Temperature
High Power Pulse
High Power RF
Diode
Magnetic Options
Standard
High Utilization
High Uniformity
Magnetic Stages I, II, III
Moving Magnetics
High Rate
High Uniformity
High Power
Low Pressure
Balanced
Unbalanced
Mounting Options
Internal
External
Assembly Options
Single
Multiple
Contact an Angstrom Sciences Product Manager at 1.412.469.8466 to discuss your specific operational requirements, or Request a Quote now.
|
|
SPOT LED 003. PLUG + LIGHT
Waldmann underscores its claim as an innovation leader with the new machine luminaire SPOT LED 003:
- No stroboscopic effect.
- Intelligent circuit board.
- No heat generated in the direction of the light beam.
- Depending on the application, the SPOT LED 003
can be flexibly used as either a spot or area light.
- Service life up to 50,000 hours or around 6 years of continous operation.
- Insensitive to vibrations and knocks.
- High blue proportion in the light of the LEDs promotes
concentration and motivation.
- Compact dimensions. |
|
| The Bug-gy-vert is a portable battery powered 4-wheel drive welding carriage with or without torch oscillation. Strong permanent magnets hold the machine on the workpiece, allowing it to travel on vertical or oblique work surfaces. Guide wheels on the Bug-gy-vert automatically track the torch in the fillet joint. |
|
Bussi Elettronica manufactures Magnetizers. The experience accumulated makes it possible to find the best solutions while bearing in mind the energy required for the specific application, the type of movement and any on-line quality control.
MAGNETIZERS FIELDS OF APPLICATION :
Motors and Gear-Motors
Magnets for Loudspeakers
Sensors : ABS for Automotive industry and other applications
Magnetic profiles for gaskets
Rare earth Magnet
Magnetic chucks couplings and brakes, clamping magnets
Magnetizers for magnetic sheets
CHARACTERISTICS OF THE MAGNETIZERS :
High Magnetizing precision
Absolute reliability
High Productivity
Flexibility
Customised products
Automotive
Magnet for ABS: metal disc vulcanised with a mixture of rubber and ferrite.
Magnetic imprint: axial or radial up to 48 pairs of poles.
Magnetization extremely precise for concentricity and trace type.
Materials
Magnetization of alnico, ferrite and rare earths. Samarium cobalt and neodymium-iron-boron (rare earths) have excellent magnetic characteristics, but having a high coercive force require very powerful systems. |
|
High Performance Bench Magnifier
for inspection, manipulation and material rework.
Features and Benefits:
High specification optical lens for minimal distortion across the entire field of view. The lens is finished with a multilayer anti-reflective coating to minimise ambient reflection disturbance.
Ease of Use:
2.5 dioptre lens provides optimal magnification, field of view and working distance for optimum comfort. Long life, ultra bright, corrected and reflected fluorescent illumination for superb image clarity and colour rendition.
|
|
SNL 319, SNLE 319 (with electronic ballast)
- 2 optional types of light.
- Pivoting magnifier.
- Intense light.
- Most modern energy saving lamps.
- Effortless adjustment without cumbersome swinging movements.
- 3-D ball swivel head.
- Spring balanced joints.
- ESD-version also available. |
|
The proper selection and design of packed tower distributors, collectors, supports, and other column internals are essential for optimum packing performance.
At Koch-Glitsch we take special care to assure that liquid and vapor distribution to the packed bed is uniform and that the equipment is selected to best handle any special process considerations, such as fouling or foaming. We offer a proven line of distributors and redistributors for a wide range of flow rates, physical properties, and turndown requirements. Our internals are available in a variety of styles and materials, including ceramic, graphite, and many plastics. |
|
APPLICATION The machine is designed for automatic loading and unloading of paper cores from the rewinding shaft.
FEATURES With the movement of the cylinder controlled by hand-operated valve, and equipped with precise aluminum mould to improve the efficiency and quality of the products.
MAIN TECHNICAL PARAMETERS:
MODEL 1 M 1.3 M 1.6 M
Working width 1000 mm 1300 mm 1600 mm
Paper core diameter 25.4-76.2 mm 25.4-76.2 mm 76.2 mm
Working air pressure 5 kg/cm2 5 kg/cm2 5 kg/cm2 |
|
Service life of 50,000 hours (at a luminous-flux reduction to approx. 70%).
Hard-coated aluminium housing for improved wear and corrosion protection.
Protection from electrostatic charge and polarity reversal.
Choose between spot or area light.
Special lens holder for maximum luminance.
Insensitive to vibration and temperature changes.
|
|
The LAUDA Integral T is the trademark which stands for extremely efficient process thermostats in a compact design. As generalist for fast, precise thermostating in the external circuit, they easily master the most demanding tasks. The most popular fields of applications are process engineering, production and research.
Integral T process thermostats make possible rapid thermostating with powerful heating and cooling capacities combined with a small active internal volume. This minimises thermal ballast and exothermic reactions are effectively controlled. Its compact construction is space-saving and makes the Integral T mobile.
Powerful for indirect thermostating tasks:
Integral T process thermostats are particularly suitable for the external thermostating of reactors, mini plants and calorimeters, whereby wide temperature ranges and fast temperature changes are essential. Fields of application: process engineering, production, research.
Performance profile of the Integral T:
✜ Programmer with max. 150 temperature/time segments, divided into 5 programs, with loop, change and pause function
✜ Parallel display of 2 temperature values with a resolution of 0.1 C
✜ Discharge pressure display
✜ External control via Pt 100 temperature probe or standard signal
✜ User calibration and LAUDA 2-point calibration
✜ Analogue inputs (3) and outputs (2), e.g. for control system. Can be configured to 0...10 V or 0/4...20 mA
✜ Malfunction indication for low level, overtemperature, pumps and cooling compressor
✜ Remote "malfunction display via neutral contact
✜ Stand-by switch via neutral contact
✜ RS 232/485 interface for PC and LAUDA Wintherm Plus control software |
|
LAUDA Integral XT - Process thermostats for thermostating in an extremely wide temperature range from -90 up to 300 C. With their high heating, cooling and pump capacities, LAUDA Integral XT process thermostats create a new thermostating dimension in process engineering. The basic principle comprises a circulation thermostat with a very small internal volume and non-perfused expansion vessel.
LAUDA Integral XT process thermostats are equipped with the Command console as standard. Thanks to the intuitive menu-driven operation, the device settings are easy to use. Dynamic processes or other difficult thermostating tasks are safely mastered thanks to the use of high-performance technology.
Performance profile:
✜ High-resolution, back-lit graphic LCD display for depicting the entire thermostating system, and with individuallyadjustable surface
✜ Real-time clock combined with timer function
✜ Editable programmer for up to 150 segments in five programs
✜ Nine pre-defined sets of parameters can be selected for the control
✜ Menu-driven operation in German, English, French or Spanish
✜ Function lights for heating, cooling and external control
✜ Error reports by means of bright LED lights, acoustic alarm and clear text message
✜ Vario pump with eight steps and adjustable limit of the pump pressure
✜ Integrated external control with cascade connection
✜ Supply temperature limit for the gentle heating of the external system
✜ Integrated opto-decoupled RS 232/485 interface as standard
✜ Freely scalable graphic display of the temperature variation |
|
The OMVE MPV range
The OMVE Multi-Purpose Process Vessels are an essential part of a continuous flow process or a batch process. The MPV-range can be adapted to specific requirements based on the process and the products that have to be processed. Specific requirements can also be integrated.
The multi-purpose process vessels are available in 10, 25, 50 or 100 litres. Larger vessels are available on request.
All vessels are mounted on a mobile skid inclusive the instruments and controls.
The OMVE MPV vessels are suitable to use for:
- Mixing and Blending
- Desolving powders in liquid
- Aseptic) Buffering
- Fermentation
- Heat Treatment
- Deaeration / Degassing |
|
" HelieR - Random Packing "
The HelieR Random Packing have Specific Transfer Areas from 50 m2/m3 up to 280 m2/m3 .
Thanks to its geometry and to the presence of special "windows", the HelieR Random Packing permit to:
> avoid the formation of preferred paths
> have lowest pressure drops
when compared to other random packing .
Available in different diameters (1", 1.5", 4") they can be made in various materials, in accordance with the process specifications for which they are chosen.
Among the various application of the "HelieR Random Packing", we have
- Bio-Percolators
- Absorption Columns
- Washing Towers
- Distillation Columns
- Transfer Beds
- Washing Columns
- Percolators
- Desorption Columns
- Cooling Towers
- Stripping
- Washing
- Stripping Columns
all of which are "Mass Transfer Equipment" hugely used by many process industries such as Oil & Gas, Chemical, Petrochemical, Oil, Energy, Cogeneration Plant, Water Treatment, Sludge Treatment ... and the "Process Engineering" sector in general.
Practically every time it is needed to have an "Exchange Surface" to
A) regulate the process parameters
B) apply any Mass Transfer Operation
C) realize any Heat Transfer Operation
between two different fluids (Gas VS Liquid) or two equal fluids (Gas VS Gas, Liquid VS Liquid) the "HelieR Random Packing" is applicable giving the "equipment user" (i.e. designer. process engineer, manufacturer, final user ... Client) the right answer to his:
> Process Requirements
> Process Specifications
and guarantees :
> high performance
> an ideal price / performance ratio |
|
Koch-Glitsch manufactures FLEXISADDLE random packing in plastic and ceramic materials. Plastic FLEXISADDLE packing is available in three sizes: 1", 2" and 3". Ceramic FLEXISADDLE packing is available in five sizes: 3/4", 1", 1 1/2", 2" and 3".
The following are capacity and pressure drop charts for plastic FLEXISADDLE random packing and ceramic FLEXISADDLE random packing.
FLEXISADDLE random packing and BALLAST SADDLE Random Packing are equivalent. |
|
| Double E offers core cutters in manual, semi-automatic and fully automatic models. Each model cuts cores efficiently and quietly without creating sawdust. The machines accept cores with diameters ranging from 38 mm (1.5") to 200 mm (8"), and wall thickness up to 20 mm (.75"). A simple and quick modification allows the machine to switch between various core IDs. |
|
APPLICATION Suitable for cutting paper core.
FEATURES Cutting with circular knife, manual or cylinder knife feeding, manual or auto material unloading.
MAIN TECHNICAL PARAMETERS:
Maximum width of cut @@500 mm
Minimum width of cut @@12 mm
Paper core inside diameter @@76.2 mm
Paper core thickness @@3-5 mm
Motor @@2 HP
Working air pressure @@5 kg/cm2 |
|
APPLICATION Suitable for OPP adhesive tape/glass paper tape.
FEATURES Centralized control panel: All operation controls. For this machine are centralized in a control panel.
Three-step length setting: This length setting provides extremely smooth rewinding operation to gives accurate rewinding length.
Automatic shaft change: Once the rewinding operation is accomplished, the machine will automatically perform shaft changes for convenient and efficient operations.
Crowned stretch Roll: The stretch roll is specially designed to eliminate tape wrinkling during extension and feed.
Pneumatic brake: Brings the machine to an immediate halt for accurate positioning and labeling.
MAIN TECHNICAL PARAMETERS:
Valid width @@1350 mm @@1000 mm
Max. diameter of rewinding @@120 mm @@120 mm
Max. diameter of unwinding @@600 mm @@600 mm
Min. slitting width @@12 mm @@12 mm
Diameter of paper core @@76.2 mm @@25.4-76.2 mm
Slitting machine @@0-180 M/min @@0-180 M/min
Main motor @@5 HP @@5 HP |
|
The CW-5 (CWO-1500) Circle Welder is designed for single pass or multipass welding of couplings on sprinkler pipe, utilizing MIG or Flux Cored process, with gas shielding. The machine is equipped with its own wire feeder, welding control, drive motor, speed control for rotation, horizontal and vertical adjusting racks, rise and fall cam, gun and cable assembly, burnback control, 50 ft. (15 m) of control cable and wire reel adaptor for 30 lb. (14 kg) spools. Welding control has wire feed speed (amperage control, cold wire inch, wire direction and weld switches.
|
|
For dispensing of different media, like solder paste or glue, we offer a range of different systems. This range encloses as well simple, manual stencil printers and dispensing systems as more complex systems, which are suitable for bigger series down to fine-pitch components.
The small stencil printers SD 903.001 and SD 903.002 are constructed for simple components and smaller runs, while the printers SD 903.520 and SD 903.524 as semi automatic systems make even more options available like e.g. defined squeegee pressure. For Dispensing the classic Manipulator LM 901 can be used for prototypes and small batches, while the fully automatic dispenser DA 400 can be integrated even in production lines. |
|
|
|
Manufacturing equipment 
