|
|
|
The conical centraggi are mechanical members who allow to the precise centratura of slabs of the stamp or others members been involved in the transformation process.
|
|
Grind stock is provided on the FEMALE interlock surface. To
register the interlock on the tapered surfaces, stock must be
ground from the front face of the female until there is a slight
clearnace between the faces of the male and female when
assembled. PRECISION FITTING of interlocks requires grinding
the necessary amount of stock from the female face to
obtain contact on tapered surfaces AND male and female faces
simultaneously.
|
|
CPI QUICK COUPLINGS FOR MOULD TEMPERATURE CONTROL
Straight-through standard profile CPI quick couplings
- Fast, automatic and reliable. Connect and disconnect with just one hand.
- 2 diameters (8 mm & 12 mm, full flow) offer maximum flow rates in a small body.
- Traight-through design eliminates all risk of scale buildup.
Applications :
- Mould temperature control on thermoplastic injection-moulding machines and zamak or aluminium die casting equipment.
- Cold water, refrigerated water or hot water circuits.
|
|
- Quick and easy installation (even on existing molds).
- Return of the ejector plate is assured.
- Part ejector plate is assured.
- Coupling is obtained in any position, disconnecting is after the ejector plate is fully returned.
- Fast acting up to 30 strokes/minute.
- No wearing parts.
- Can be used on all injection machines equipped with hydraulic or mechanical ejection.
- Set-up time can be greatly reduced.
- Reduce noise on machines with mechanical knockouts.
- Especially suited for injection machines that do not have easy access to the ejector plate.
- Allows for center ejection to be tied in.
|
|
|
The daters are members who, lodged in the part figure of the stamp, allow as an example to identify the article printed with the fabrication date (day, month and year).
|
|
Double Date Stamp
• Allows two different indications on the plastic
part without the need for 2 date stamps, reducing
costs and space required
• The same height is always maintained between
all rings
|
|
|
The externally heated EWIKON HPS III system offers an advanced naturally balanced, manifold technology with streamlined flow channels which can be combined with a wide range of externally heated high performance nozzles. A diversity of gating options makes the system suitable for for almost all kinds of applications.
|
|
• Ampco #18
• Superior wear characteristics
• More durable than plated bushings -
NO plating to wear through
• Counterbore for rib in pin retainer
plate
|
|
The High Performance System HPS II combines the advantages of an internally heated heated hotrunner system with the possibility to use existing 230 V standard controllers. From the economical point of view in many cases HPS II offers best possible solutions especially for materials easy to process. The system 2420 is the core product of the HPS II system. It enables the construction of compact multi cavity moulds with close cavity spacing and a reduced number of control zones.
Close cavity spacing
Compact mould design
Reduced number of control zones
Shorter cycle times
230 V standard controllers
|
|
|
The large spectrum of accessories in the Z-program completes the idea of the HASCO building block principle. It offers meaningful and functional additions for all applications. The Z-program is divided into eight ranges. From the guide pin to the electronic controller the user finds everything that is needed for the building of modern forms and tools.
|
|
The Femto-LiteTM is an 11 mm wide hot runner nozzle ideal for small closures, flip-top caps, personal care and multi-material / multi-colour products.
Engineered for applications requiring inside gating and tight pitch designs, its 19 mm pitch and a flange to tip heat profile make it suitable for a wide variety of thermoplastic resins.
Features at a glance:
Standard lengths from 73 to 163 mm, with a 3.5 mm runner diameter and 12 mm well bore makes it suitable for close gate-to-gate spacing.
Available in five gating options for both tip and sprue gates.
|
|
State of the art CNC Machines and tooling
Wired EDM Pockets with sharp corners, small radius and tapered walls
Special Milling, insert pockets, lock pockets, knock out holes, waterlines, etc.
Deep hole drilling up to 20” deep per side
Tight tolerances held
Machined complete to customer CAD files
|
|
FusionTM II screw. Delivers enhanced mixing while retaining benefits of the original FusionTM screw, namely higher output and lower melt temperature. Applications: injection molding, extrusion and blow molding.
MultiMeltTM injection molding screw. "Universal" screw works with almost any polymer except rigid PVC. Combines productivity benefits of barrier flights for melting with an integrated StrataBlend® II mixer for improved color and additive dispersion and temperature homogeneity.
EasyMeltTM injection molding screw. Combines the simplicity and economy of a conventional three-zone screw with the productivity and quality benefits of optimum material feeding, melting and metering.
StrataMeltTM injection molding screw. Resin-optimized single-stage geometry like the EasyMeltTM but with an integrated StrataBlend® II mixer for improved color and additive dispersion and temperature homogeneity.
FusionTM Screw. New-generation barrier screw boosts productivity, lowers melt temperature and improves color/additive dispersion in injection molding, extrusion and blow molding.
EfficientTM Extrusion Screw. Barrier screw for extrusion proven for more than 30 years in the field.
|
|
|
Precision-engineered and made in Switzerland, Herzog® brand machine nozzles can help you make better parts, and more of them... day in and day out. Xaloy is the sole authorized distributor of genuine Herzog® nozzles and spare parts throughout the Americas and Asia-Pacfic regions.
|
|
ranging from straight, step, multiple step, or thin walled sleeves. Nitrided H-13 with either a 30 R/C or 50 R/C and being the most commonly used steel in ejection molding. However other materials such as: A-2, A-10, D-2, M-2, S-7, 440, and 420 stainless steels as well as Copper alloys including, but not limited to, Ampcoloy and Mold Max.
Custom Sleeves can be manufactured to a working hardness designed to your application. We also offer a variety of surface treatments such as Nitride, Titanium Nitride, WS-2, and Armorloy to name a few. Sleeves ranging from under 1 inch long to 24 inches long are available. Inside and Outside Diameters are ground concentric to ensure proper alignment. Your custom sleeves can also be supplied with ejector pins for a matched slip fit.
|
|
Ejector Pins, Core Pins H-13 Nitrided and 50-55Rc
with 3-5 Day Shipping.
Also available in Moldmax and Stainless Steel H-13
thru-hard and Mold Star cut to length.
|
|
|
The inserti of money laundering they are members of identification of the product placed inside of the stamp. In the specific one it characterizes the tipologia of the transformed material and its riciclabilità.
|
|
Wear Plates Standard, Metric & Self Lubricating
• Ground top & bottom
• Machined edges
• Cut to length
• Priced per inch
|
|
| ... products without technical information |
| |
|
|
Extrusion dies, Injection molds, Mold ejector pins...
