|
|
Each industry has its own requirements with regard to pressing material, pressing volume etc. The solutions shown here present the classical and frequently used system recommendations. Many HSM system solutions can do much more - and are suitable for almost all requirements - than the uses displayed here. Inquire if you have other materials or uses. We will find the suitable solution. Together with all detail solutions, each user gets the maximum benefits. Long service life, economic efficiency, operator friendlyness, high pressing power - these are the typical plus points that each HSM bale professional press can be credited for.
|
|
The GHT 4x4 is the total traction filter press with high productivity. The professional filter plates, which are hung from the upper beam, are moved automatically by a rapid shifting device equipped with a carousel system which reduces the filter professional press opening and closing sequence to the minimum. Four hydraulic cylinders manufacturers placed on the plate pack corners ensure perfect operation and limited structural stress, even in the most unfavourable working conditions. Different from the traditional push-type systems, the total traction system does not transmit any stress to the upper beam, which is only subjected to weight of plates supported from it. In fact, the forces applied by the closing device are subjecting the tie beams to tension, which avoids stress on the frame and consequently, the risk of structural deformation. Effectively guarded moving parts and the use of state-of-the-art electronic interlock systems mean that the GHT 4x4 conforms to the highest operator health and safety regulations. Routine maintenance operations are simple, thanks to easy access to the filter plates, both for inspection and for filter cloth replacement.
|
|
Vertical baling presses
Highly compacted bales weighing up to 550 kg .High throughput. For many different materials .Compression up to 25:1. Easy to operate .Handwheel door lock to prevent the user from doors suddenly opening. Patented retention system: A combination of fixed and moving claws optimises the compression and retention of the material - increasing the filling volume and the baling performance
The technical features:
automatic return stroke
movable retaining claws
strapping with continuous polyester tape
low-maintenance hydraulics
torsion-free professional press ram guide
hard chrome-plated piston rod
secure filling flap and bale
removal door
bale ejector
runs quietly
microprocessor controller
|
|
Air-Operated baler =
Low Energy Consumption!
Fast Pressing Cycle!
High Degree of Compaction!
Easy Maintenance!
Safe Operation!
Very versatile bale professional press for large amounts of e.g. Cardboard, Plastic, Paper and Big Bags
|
|
Air-Operated Can Professional press for pressing cans of up to 30 litres:
No Oil
No electrical parts
Safe & easy to use
Easy to clean
Takes up very little space |
|
Each industry has its own requirements with regard to pressing material, pressing volume etc. The solutions shown here present the classical and frequently used system recommendations. Many HSM system solutions can do much more - and are suitable for almost all requirements - than the uses displayed here. Inquire if you have other materials or uses. We will find the suitable solution. Together with all detail solutions, each user gets the maximum benefits. Long service life, economic efficiency, operator friendlyness, high pressing power - these are the typical plus points that each HSM bale professional press can be credited for.
|
|
| The TANK-VAC draining appliances enable users to collect industrial fluids with or without filtering them. They extract swarf/chips, sludge and sediments that they separate from the fluid collected, and then release the fluid either directly or following a fine filtration process, so that it can be re-used immediately. |
|
| Tank made in 304 stainless steel specially designed for suction, transfer and subsequent drainage of liquids, either with or without solid particles in suspension. |
|
Hitachi's mobile shredding machines are machines that pulverize concrete debris with their shark-like jaws. Mobile, compact, and environmentally-friendly, these machines do their part to recycle precious materials.
|
|
ARTES Ingegneria S.p.A. (BONO Artes) has gained extensive experience throughout more than 30 years in providing solutions for specific water and waste water treatment issues.
Our company is now able to supply our Customers with a large range of products which could be summarized as follows:
Desalination & Drinking Water Production Plants, that provide fresh and potable water to any industrial and civil installation located even in remote and secluded areas.
Industrial Process Water Treatment Plants, when water is a raw material in an industrial process (beverages, pharmaceuticals, textile, food, etc).
Water Treatment Plants for Steam & Power Production. High purity water is mandatory to prevent corrosion phenomena in the professional boiler and maintain the quality of the generated steam.
Industrial Waste Water Treatment Plants. Aware of the importance of sustainable development ARTES is providing dedicated waste water treatment solutions to specific industrial processes.
Civil Waste Water Treatment Plants. Even for small communities implementing an adequate sewage treatment is extremely important to reduce the spreading of infectious diseases and to reduce the impact on the environment.
Water Recovery Plants. Waste water re-use in industrial and civil applications in order make it feasible to reduce the consumption of fresh water and face the increase of population and the economic growth. |
|
- cutting force up to 310 kN
- opening of the blades up to 275 mm
|
|
HSM office technology offers a large family of various document shredders, each one precisely tailored to a specific requirement. Whether for home offices, work offices, IT departments or professional document shredding. The only thing that never changes is the first-class quality of our high-end machines which are "Made in Germany".
|
|
Our industrial shredders have been created for information security for your home and office.
In general we provide two types depending on the material: one for document only, and the other for paper, CD, etc.
Depending on the capacity, you offer large capacity and smaller capacity.
For more detailed information, please do not hesitate to contact one of our representatives.
|
|
Drum industrial crusher
Orwak 2500 DC is a drum crusher that can crush up to 60 professional drums per hour with any drained liquid collected for disposal.
Orwak 3210 DC is a combined baler and drum professional press that collects any residual drained liquid for disposal. |
|
The Mikro-LGM long gap mill assures superior product quality and peak operational efficiency. Built upon the strength of Hosokawa's unparalleled experience in size reduction, thermal processing and classification, the Mikro-LGM long gap mill is designed to meet the exacting demands of a wide variety of industrial applications.
|
|
Air-Operated Baler for cardboard, paper, plastic and big bags:
No oil
No electrical parts
Safe & easy to use
Easy to clean
Fits anywhere
The baler model 205 and 205TS are powerfull balers with very small footprints |
|
Small and medium-sized front-loaded balers
ORWAK 3100, 3210, and 3300: These front-loaded balers require a minimum of floor space and produce bales in the range 40 to 250 kg. High density bales mean lower transport costs!
ORWAK 3100 is a small and compact baler and has a footprint of just 0,5 m2. It is perfect for companies with small amounts of packaging material. Bales up to 50 kg can easily be handled with the bale trolley. Capacity: up to 40 kg cardboard/70 kg plastic
ORWAK 3210 is a small and efficient front-loaded baler with a cycle time of only 13 seconds. Capacity: up to 80 kg cardboard/100 kg plastic
ORWAK 3300 is a medium-sized baler with a built-in digital professional display. The height is only 1980 mm for convenient installation where the ceiling is low. Capacity: up to 200 kg cardboard/250 kg plastic |
|
FEATURES:
- Works with professional grinders or industrial shredders or to inspect finished parts.
- Find tramp in virgin plastics, rubber, and recycled materials.
- Protect against all conductive metals.
- Key in settings on the Tunnel Detector's LCD interface.
- Choose from a long list of options to fit your needs.
- Outfit the conveyor with floor supports and other accessories.
Grinder / Shredder Feed Conveyors suppliers let you catch both ferrous and nonferrous metal contaminants in recycled plastic before they damage equipment or ruin product. This dual-function unit can also be used for monitoring plastic parts. It combines an option-rich Bunting Conveyor with any of three optional industrial metal detectors that sense all conductive metals and feature self-diagnostics for easy adjustment and reliable operation. All three available detectors have a triple-coil, high-frequency metal detection system with Product-Effect Compensation and EMI/RFI professional filter. |
|
With the proven use of gearless drive technology, the limitation of AG/ SAG mill size due to gearing constraints has been eliminated. Metso Minerals is the world's leading supplier of gearless AG/SAG mills.
The experience gained from installation and operation of these mills enables us to offer mills of up to 35,000 installed horsepower or more.
Today a single grinding line with a Gearless SAG mill and appropriate globe mills can process over 100,000 mtph.
Gearless AG/SAG Mills
Gearless drives (ringmotors) have been used on tumbling mills for several decades. The design features motor rotor elements bolted to a mill shell,
a stationary stator assembly surrounds the rotor elements, and electronics covert the incoming current from 50/60 Hertz to about 1 Hertz. The mill
shell actually becomes the rotating element of a large low speed synchronous motor suppliers. Mill speed is varied by changing the frequency of the current to
the motor. The ringmotor can be used to inch and spot the mill for maintenance.
Our engineers welcome the opportunity to assist you with circuit and circuit control design as well as start-up, operation, and optimization of the milling plant. |
|
Model: ECO 2600
Professional grinder recommended for: Heavy Duty and Large Size materials
Power (KW): 200 / 250 / 315
Drive: Mechanical or Oil Hydraulic
Possibility to apply:
- unloading supplier of belt conveyors
- metal and non metal selecting system
- screen for the calibration of outlet material. |
|
Model: ECO 2000
Heavy - Duty, Medium/Large Size Professional grinder
Grinder recommended for: Heavy - Duty, Medium and Large Size materials
Power (KW):160 / 200 / 250
Drive: Mechanical or Oil - Hydraulic
Possibility to apply:
unloading manufacturers of belt conveyors
metal and non metal selecting system
screen for the calibration of outlet material |
|
The Plasma Arc Centrifugal Treatment (PACTTM) System provides high processing temperatures (12000 to 16000C) for superior Destruction of hazardous waste and Removal Efficiences (DRE's).
This processing method greatly reduces the volume of the charged material and depending upon the materials chosen to be processed in the PACT, those waste products have potentially profitable uses.
Thermal Processing Equipment offered by SECO/WARWICK is a products range made in Europe, based on RETECH's SYSTEMS LLC knowledge, experience and technology.
Cooperation between SECO/WARWICK and RETECH benefits European customers by metric standards, European parts, CE for European Directives, local sale and after sale service support. |
|
High capacity electro-mecanical baler for e.g. cardboard, plastic, big bags:
Extra wide professional door opening!
Pressing plate goes all the way down!
Less than 2 meters in height!
Unique door opening system!
Maximum safety! |
|
High capacity front-loaded balers
ORWAK 3410, 3410 Sliding professional door, 3600 and 3810 are suitable for customers with large amounts of waste.
ORWAK 3410 is a large front-loaded baler constructed for compaction of cardboard and plastic foil. The noise level is low only 59.5 dB (A)! ORWAK 3410: capacity: up to 300 kg cardboard/450 kg plastic
ORWAK 3410 Sliding door: For even easier and faster loading this model of 3410 has a sliding door that opens automatically after each cycle. The baler is also equipped with an autostart function!
ORWAK 3600 is, with a professional press force of 50 ton, our largest and strongest front-loaded baler. Capacity: up to 450 kg cardboard
ORWAK 3810 is a large and powerful front-loaded baler with an extra generous loading aperture. It is equipped with a sliding door and an autostart function as standard. Capacity: up to 500 kg cardboard |
|
For many different materials
The technical features:
High throughput
Many different uses
Low height requirement
Highly compressed bales up to 600 kg
Easy to operate
Large loading opening, also suitable for bulky material
Optional polythene bag attachment
Also for awkward materials e.g. expanding foam, polystyrene, hollow vessels, metal buckets, barrels, car tyres and much more
|
|
Model: TOP CUT HYDRO 2600
Heavyduty professional grinder suitable for: large quantities and very Large size materials
Power (KW): 315
Drive: Oil-hydraulic
Possibility to implement:
- unloading suppliers of belt conveyors
- ferrous and non ferrous separation systems
- different grid weft sizes for the calibration of the outlet material |
|
Aeration in biological treatment systems
For aeration and circulation in activating basins of the biological cleaning stage we use the aerators (Rotox system). An important prerequisite for a successful biological sewage treatment is a sufficient oxygen input. In addition to the high oxygen exploitation in the sewage a thorough circulation of the basin contents is achieved.
Advantages:
- universal use
- later installation into existing plants without problems
- uncomplicated handling
- independent of basin shape and dimension
- easy installation at low cost
- adaptable, flexible system
- intermittent operation is possible |
|
for the removal of iron, steel and non-ferrous items from (recycled) materials, such as household refuse, glass, rubber, timber, coal and building & Demolition waste
|
|
Magnetic equipment used to recover ferrous and non-ferrous metals from automobile industrial shredder residue, garbage, electronic/computer scrap and bottom ash. Also to purify glass cullet, plastics/pet, foundry sand and wood waste.
Eddy Current Industrial separators
Ideal for material recovery facilities wishing to automate removal of nonferrous metals from trash, MSW, sand, glass, dirt, electronic scrap and shredded automobiles.
Drum Magnet Separators
Designed for the removal of ferrous material from shredded automobiles, bottom ash, slag and other recyclable scrap including chips, turnings and stampings.
Suspended Belt Magnets
These powerful electromagnetic separators are self cleaning with a variety of specialized belt styles.
Pulley Magnets
Used as head pulley in manufacturer of belt conveyors for continuous automatic removal of ferrous from non-ferrous material.
Professional metal detectors
Rugged, yet highly sensitive instruments designed to detect ferrous and nonferrous metallics in a variety of bulk materials.
Rectifiers/Dc power supply units
Convert AC power to DC power to operate Electromagnetic Drums, Pulleys, & Belt Magnets.
Magnetic and Eddy Current Separator Duo
Need to reliably separate aluminum flakes from polyethylene terephthalate (PET) at your facility? |
|
KE is a side beam professional filter professional press with reduced dimensions, suitable to be installed even in very small spaces. Thanks to its solid structure and simple design, this type of filter is an extremely functional machine.
KE filter presses, exactly like the other bigger machines manufactured by DIEMME, have been designed to also work at high feed pressure values: 12,15, and 30 bar.
|
|
|
|
Waste processing
