|
|
LMI's maestro%u2122 lets vision system engineers rapidly design, install, and start-up any machine vision solution while reducing time, materials, and costs using only two universal maestro%u2122 modules for all installations. maestro%u2122 is comprised of two modules. The P800 module is the master controller that interfaces encoders and the I/O with a single power supply delivering microsecond synchronization, power, and safety on CAT5e cables for up to eight or more cameras or light sources. All timing, triggering, synchronization, sorting, and reject activations are completed by the maestro P800 module.
The connecting piece to the maestro%u2122 P800 is the C12 module. This component is a camera and light controller that is connected to the P800 with a maximum 100-meter CAT5e cable. The C12 module powers and triggers any camera while providing synchronized configurable high current pulses for LEDs/lasers.
The functionality of maestro can be defined in three words - Connect, Configure and Conduct. %u201Cmaestro%u2122 will allow the user to Connect various components that encompass a machine vision system through a standard CAT5e cabling. Configuration occurs through TCP/IP and XML, or via a web browser for standalone operations. And finally, the conductor, or master controller enables the user to conduct event timing to a microsecond.%u201D
The Benefits:
* Reduced inventory with only two basic modules
* Compatibility with all cameras and light sources
* Compatibility with all machine vision software libraries
* Simple CAT5e cabling for rapid installs and reduced costs
Media Contact:
Susan Hancock, LMI Technologies, Inc.
Shancock@LMItechnologies.com, Telephone: 1-604-636-1011
|
|
Modular inspection systems for sorting and process monitoring
Our inspection systems for tile sorting and screen print monitoring are based on the ColourBrain® technology for colour cameras and automatic colour calibration. The CeraVision® inspection systems continuously measure the visual colour appearance and sort according to colour shades. The smallest surface and edge defects are reliably detected and sorted out, even at high cycle and belt speeds.
CeraVision®
Single Track:
Standard system for tile sizes of 100 x 100 mm2 to 600 x 1200 mm2
Double Track: System with extremely high sorting rate for small tile sizes
Multi Track: Four track system for small tile sizes (50 x 50 mm2)
XL System: For tiles wider than 600 mm
CeraScreener®
Standard system for tile sizes up to 330 x 330 mm2 (fired)
or 370 x 370 mm2 (not fired)
XL station for tile sizes up to 600 x 900 mm2 (fired) or 670 x 1000 mm2 (not fired)
|
|
Food product processing requires a variety of operations, such as sorting based on dimensions, shape and colour, on processing lines that run at very high speeds.
LMI's non-contact sensor vision technologies are ideal for such applications. Integrated into a single rugged and lightweight housing, our sensors dramatically reduce the costs and calibration challenges associated with machine vision component implementation. This measurably increases the quality of the final product by supplying our customers with synchronized real-time data for 100% inspection via smart sensors.
Our Food applications division works closely with System Integrators & Original Equipment Machine Suppliers to deliver the most effective solutions for their particular sensor vision needs.
|
|
Extrusion line for Determination of Film Quality
Stand-alone extruder KE 30 with Film quality analyzer and FSR
The Film Quality Analyzer measures the transparency and optically checks the quality of blown or flat films on a laboratory or production scale. The instrument detects in-line and differentiates between
• black specks
• gels
• fisheyes
• holes
These faults are classified acc. to their type and allocated to size classes.
The film is assessed on the basis of the number of faults and their size distribution.
Evaluation is done automatically through a comfortable Windows® 9x or NT software.
All data are stored in a database and can be imported by commercial programs.
|
|
Measurement repetition accuracy from ±3 µm
Graphic user interface visiTeach® for creating and storing new inspection and test sequences
Easy and precise positioning of the specimens with universal holders (glass L and V rails)
Data provision for creating test reports
Suitable for use under workshop conditions
The specimens can be tested and measured according to the following criteria:
General presence check
Thread present
Thread root, thread lead, external thread diameter
Check for foreign parts and chips
Measurement of the external shape, i.e. length, diameter, area, chamfer, radii, thread, angle, grooves, cones, number of cogs on cogwheels etc.
Centricity test
|
|
SMAC unique electric actuator configuration such as mini inline XYZ gauging systems gives you the capability of 100% parts inspection (eliminating bad parts) and correction through immediate feedback and adjustment i the manufacturing process. Volumes up to 100 cubic mm can be covered by a single system.
The actuator systems can measure so many features - external & internal dimensions, threads, bores, grooves while checking for burrs at the same time. All this done in normal ie. dirty environments. SMAC measurements can easily be correlated to be manual gauge methods, the "GAUGE CORELLATION."
SMAC offers solutions to the greatest challenges facing auto parts suppliers- 100% perfect parts.
Please contact us for more information.
|
|
|
The Verimet U1000 System is a Modular Automatic Universal Instrument (MAUI) designed to perform gaging, nondestructive eddy current testing, and other real time measurement data acquisition operations. The U1000 replaces all the eddy current and gaging instruments previously sold by K. J. Law Engineers over the years with a single modular instrument system having all their capabilities and more. The U1000 can perform eddy current testing from ultra-high frequency flaw detection to low frequency hardness verification and case depth prediction. Its gaging capabilities process input from LVDTs and Air Circuits to perform difficult dynamic measurements, and includes advanced filtering and spindle-compensation capabilities. The U1000 was developed using the latest hardware and software standards to allow it to integrate with other devices and systems and to evolve with emerging standards.
|
|
|
Vishay proposes several technical solutions to measure uninterrupted the traction of band exerted on a plastic film, paper, on sheet, fabrics, and generally, all that ravels uninterrupted on rollers, this starting from 20 daN up to 100 tons
|
|
|
High quality, flexible and handheld Digital Video Microscope with side viewing BGA zoom lens (4x zoom factor) and brilliant image quality for Visual Inspection, Digital Image Recording and Dimensional Measurement of BGA, uBGA, CSP and Flip-Chip packages and all other SMT or Through-Hole components on printed circuit boards.
|
|
Model GA841 Automatic Cloth Folding Machine
It is used to fold the cloth into pieces in cotton mills and printing and dying mills.
Structure Characteristics:
1. Automatic length-measuring motion (select and use);
2. A saving of time and labor when cloth is out automatically; yardage and meters can be set at will;
3. Single shaping folding knife has the features of stable movement, light weight and fine rigidity, and is more advantageous with wider width;
4. Precise folding width, error: ±5mm
Technical Parameters and Main Specifications:
1. Cloth width of application: 800~3900
2. Cloth folding velocity: 80~60 folds/min (less than 2m), 60~40 folds/min (more than 2m)
3. Length of folding size: 900~1020
4. Lifting stroke of folding table: 170
5. Power of motor: cloth-dragging motor: 0.6KW; lifting motor of folding table: 0.37KW; cloth-out motor: 0.6KW (less than 2m), 1.5KW (more than 2m)
6. Overall dimension: length and height: 2160*1500;
width: 2300 (Model 160), 2500 (Model 180), 2700 (Model 200), 3100 (Model 240), 3700 (Model 300),4100 (Model 340),4700 (Model 400)
7. Types: Model 160, 180, 200, 240, 300, 340, 400
|
|
APPLICATION
Coating Thickness Analyzer is a tool for precise and accurate XRF measurement of various metallic and non-metallic coatings thickness (anticorrosive, insulating, antioxidizing, waterproof, pipe coating, etc.). Base/coating components are elements from Mg to U. System is applicable for control and monitoring of industrial processes.
FEATURES
- Automatic choice of coating thickness evaluation method for optimization of relative error of measurements,
- Remote control of analyzer electronics and software by ETHERNET interface from Workstation Device and communications with OPC server,
very simple and convenient operation and service,
- Possibility to install the measurement block under and above the measured material,
- built-in industrial computer.
For additional information, please contact us: XRF@bruker-baltic.lv
|
|
X-Strata980 for analysis of trace elements and coating thickness
Combining a high power X-ray tube and high resolution detector, the X-Strata980 X-ray Fluorescence analyzer delivers limits of detection in single digit ppms!
Oxford Instruments offers a full range of instruments dedicated to the electronics manufacturing industry. Our XRF instruments are available in different configurations; for RoHS compliance screening and testing. Please contact us to find out about the wide variety of solutions offered.
Key Applications:
Trace analysis of hazardous substances
Solder alloy analysis
Coating thickness measurement of gold and palladium on electronics
Metal alloy chemistry identification
Coating thickness measurement on jewelry
|
|
DeFelsko, a U.S. manufacturer of coating thickness gages and inspection instruments, offers a variety of instruments designed specifically to meet the paint industry’s requirements.
The popular PosiTector® 6000 Coating Thickness Gage has new tougher, smarter features. Still simple, durable and accurate, the American made PosiTector® 6000 retains all of its simplicity and functionality for measuring coatings on all metals.
Tough new features include large impact-resistant Lexan® display, IP5X ingress protection and protective rubber holster. As always, tough probes, robust housing and a strong warranty make the PosiTector® 6000 the right choice for coating applicators, inspectors, platers, anodizers and more. A wide range of probes are available for a variety of applications.
DeFelsko’s revolutionary PosiTector® 200 Series gages measure coatings on non-metals such as wood, concrete, fiberglass and more. Specifically designed to measure coatings including paint, powder, varnish, etc, the PosiTector 200 is an affordable choice to quickly and accurately check coating thickness.
DeFelsko also offers quality inspection instruments including the Digital PosiTest Adhesion Tester, the NEW PosiTector Dew Point Meter with available Magnetic Surface Temperature Probe Kit (optional) and PosiTector Ultrasonic Thickness Gage with your choice of standard or multiple echo-thru paint gages.
Call DeFelsko at (800) 448-3835 or visit our website at www.defelsko.com to get assistance selecting the optimal instrument for your application or to request brochures of any of our quality gages.
|
|
Universal coating thickness gauge working on the coulometic principle to measure virtually all types of electroplated single or multilayer coatings such as chrome, nickel, cadmium, brass, silver, tin and zinc on metal or non-metal substrates.
This technique simply involves the removal of a small, almost invisible area of coating material. The substrate itself is not affected.
More than 70 combinations of coating and substrate can be measured with the standard equipment.
Measuring range: 0,05... 75 µm
Statistical evaluation with display of mean value, standard deviation, coefficient of variation, number of readings, highest and lowest single reading.
|
|
Versatile and accurate instrument for measuring the thickness of organic coatings on all base materials such as paints and lacquers on wood, plastics or metal. For measurement, a taper hole is bore into the surface to be measured by microscope (wedge cut principle).
Measuring ranges:
2...200 µm, 3...300 µm, 5...500 µm, 10...1000 µm
|
|
Magnetic coating thickness gauge for measuring all non magnetic coatings on steel. Measures the attraction force of a permanent magnet on steel which is getting weaker with increasing thickness. Unlike conventional magnetic gauges with analogue readout, the MikroTest® 7 digital is equipped with an LC display providing clear digital readings. Our unique principle of converting magnetic attraction values into digital readings has been patented worldwide. Quick and precise measurement, works calibration, excellent resolution.
Measuring ranges:
MikroTest® 7 G 0%u2026300 microns
MikroTest® 7 F 0%u20261.5 mm
MikroTest® 7 S5 0.5%u20265.0 mm
MikroTest® 7 S15 4.0%u202615.0 mm
|
|
OSPrey800 - A revolution in OSP thickness measurement
OSPrey800This instrument measures Organic Solderablity Preservative (OSP) thickness on the individual pads of real-time production boards. The ability to target individual pads allows specific quality control, failure analysis and troubleshooting of the OSP layer. The OSPrey800%u2019s unique non-destructive quality control technique requires neither test coupons nor sample preparation and significantly reduces the time needed to take measurements and operator error.
Other techniques for measuring OSP thickness are either destructive, labor intensive, or expensive. The OSPrey800 utilizes an innovative new technique in which various wavelengths of light are aimed at a sample and the light reflected from the surface of coating and substrate is analyzed to determine coating thickness. Typical thicknesses from 0.035-3µm can be measured and analyzed.
|
|
It is used to measure parameters such as coating weight on a moving web, using a NIR spectrometer. The concept consists of several parts selected in a best available technology framework.
This means the concept is continuously evolving, and is very flexible when adapting it to custom requirements.
At this time, the full configuration of WebTracker consists of these parts:
- One or more AOTF NIR spectrometer(s) with a remote optical head, control and chemometric software.
- A traveller, consisting of a pneumatic rodless piston with linear guiding and cable chain, with optional position measurement system.
- A high performance controller, programmed in compiled C, taking care of both I/O and the traveller movement.
- A Windows PC with the WebTracker visualization software, controlling all components.
- A LED display for visualization on larger distances.
- Off-line software for the preparation of profiles, which are used, by the WebTracker visualization software.
- Ask for our references...
Unique selling points
- Robust on-line technology: solid state; no moving parts
- Very fast scanning technology: 16000 wavelengths per second
- Full range scanning technology: different products can be analysed with same analyser (no adaptation or upgrade needed with different filters)
- Full range scanning technology: identification products possible
- Diffuse reflection technology: no need for transmission measurement
- Non-destructive technology and non radio-active equipment (no licenses needed)
|
|
|
Thickness is an important process parameter for the prevention of tool or machine damage or to monitor product quality according to ISO 9000 in blanking presses, slitting lines, cut-to-length lines, scroll shears and other coil processing machinery. Continuous thickness measurement makes the monitoring of the cost of purchased material possible. ROLAND has single sensor measurement systems as well as non-contact dual probe systems available. The systems function according to the magnetic, inductive, or capacitance principles. Detailed measurement protocols according to SPC criteria provide objective information for negotiating with coil suppliers.
|
|
21PlusTM is the ultimate measurement and control system and the highest performance gauging platform available to the industry. It incorporates the deep experience born of EGS’ CIMLine, Tracerlab, LFE, Soter and System 21 heritage and embeds it in a wholly new electronic package.
|
|
A3000UM EUROSIT is the new equipment for the execution of
not invasive surveyings of sonic and ultrasonic type to contact on structures in concrete and masonry. I use of the arranged method sonic and ultrasonic it concurs to inquire an immense range of materials give
construction is in site that in laboratory. The possibility to decide of frequencies from 16 to 55 Khz, in reception, allows therefore to carry out measures on materials that introduce mechanical characteristics, of various compactness and homogeneities.
Series A3000UM EUROSIT concurs to estimate the characteristics
mechanics of the materials, to estimate the homogeneity degree,
presence of fessurazioni, empty, defects or constructive pathologies of the element.
Instrumentation A3000UM EUROSIT is expandible for applications
ultrasonic of Cross motorized Hole, and integrity of the poles
by means of Echo-test technique.
|
|
•Measuring the thickness of concrete, rock£¬glass and other nonmetallic plate
•Sound alarm ,signal strength bar are used to improve measuring accuracy
•Direct digital read out of the thickness value avoid the inaccuracy of manual comparison
•Real time analysis of the tested data
•RS232 and USB interface to PC
•Test data create and data logging
•Memory: 32000 test data and 4000 component
|
|
Core fracture detection at die – casting processed critical components made from light metal like aluminium or magnesium .
The light metal transparent metal detector of the MMD – series detects broken off cores residing in the cast part. STL’s unique Magnetic Field Measurement Technology offers an innovative solution for a yet unsolved problem.
This opens new dimensions for quality management in Light Metal Casting.
This new technology is also more precise, faster and cost saving than X-ray or Ultrasound test procedures.
The detector offer the following advantages :
• The sensor is the only additional system in the
production process
• Also for existing equipment by integration in
robot software
• Short measurement time, ideal for high
throughput production environment
• Maintenance free
• Reliable even at high interference level
++++ STL is looking for a distributor with excellent
contacts to the Aluminum Industry for this product++++
|
|
The Link Instruments' Ultra Measure Ultrasonic Thickness Gauge is robust, easy-to-use, with variable velocity calibration that can be set to suit most materials. The Ultra Measure is calibrated to a mild set test bit and can be re-set if required, using the variable velocity + and – buttons for different materials. The unit is fitted with a LCD Display back light for use in bad lighting conditions. The unit can measure from 1mm to 199.9mm and has a resolution of 0.01mm; it is accurate to within 0.1mm. The Ultra Measure complete kit, with its high specifications, is available at a truly affordable price allowing the issue of such equipment to more engineers.
Key Features:
• Robust 5Mhz Transducer with split crystal protection to prevent any contamination
• Simple user calibration at any time
• Back Light for LCD Display
• Rugged IP65 plastic casing and industrial keypad
• Heavy Duty Instrument outer protective rubber boot
• 6 hours life with (4) "AA" alkaline batteries
• Five year Instrument warranty
• Two year Transducer warranty
• Inch or mm reading selection
Specifications:
Dimensions: 6.5” x 4” x 1.75” (165 x 100 x 43mm) approx. Enclosure: Plastic
Weight with Batteries: 0.10lb (300g)
Display: 2 row 16 character LCD display (Back Lit as required)
Frequencies: 4 to 5Mhz
Ultrasonic device – max sound level 73dB re 1uPa at 40V peak to peak Power: 6VDC via 4 X 1.5VDC AA alkaline batteries (6hours continuous use)
Measuring Range: 0.045"- 4.000" / 1.0mm – 199.0mm depending on transducer, surface condition, temperature and material.
Display Resolution: 0.001” or 0.01mm.
|
|
The Canin+ corrosion analyzing instrument provides two methods for investigating and assessing the corrosion of steel in concrete:
- Half-cell corrosion potential method - accurate field potential measurements aid in detecting active corrosion in rebars.
- Concrete resistivity method - the instrument measures the specific electrical resistivity of concrete.
This combination of potential and resistivity measurement improves the information about the corrosion condition of the rebars.
In order to satisfy individual testing needs, the Canin+ is available individually with a rod electrode, wheel electrode and/or Wenner probe configurations or as a complete system with all components.
|
|
Dual Element transducers used to measure thickness, detect flaws and corrosion in thin materials, especially where near surface resolution is required.
They focus very close to the front surface, making them ideal for corrosion and pitting tests, braze inspection and lamination evaluation.
|
|
Cygnus ROV MOUNTABLE
Multiple Echo Ultrasonic Thickness Gauge
Cygnus Instruments offers two dedicated ROV mountable thickness ga | | |
Inspection machines: NDT, Visual inspection, ...
