|
|
| Products 151 to 180 of 198 |
Sika supplies customers who are principally engaged in the industrial production of components for the construction industry.
Markets like high performance windows including hurricane resistant windows, bomb blast windows, bullet or burglar proof windows are the focus as well as insulating glass, high end residential windows and doors, metal roofing systems, sandwich panels, curtain wall systems, wind energy systems, modular buildings and lifts or elevators.
Applications like as:
Sandwich Panels for buildings
Wind Energy
Structural Glazing
Insulating Glass
|
|
There are several application areas for penloc® due to an enormous product range:
Glass bonding with acryl glass
Construction: bonding with material like metal, glass, ceramic, hard wood and many plastics (except PE and PP).
You can find following products:
penloc® GZ/GTI/GTR
Ideal for hard, non porous material.
Advantages:
fast, universal
Short curing time at room temperature
No mixing
Easy handling
|
|
Flexible
Adcote™: High performance laminating adhesives including urethanes, acrylics, polyesters, modified and formulated polymer systems.
Aqua-lam™: Latest series of high performance water based polyester/urethane adhesives to replace solvent based products while minimizing VOCs
Mor-Free™: 100% solids, one- and two-component urethane adhesives. Another alternative to solvent systems
Rigid
Mor-Ad™: Solvent based, one- and two-component urethanes, two-component epoxies, emulsion polymer isocynates, modified polypropylene adhesives, polyolefin film adhesives, and 100% solids moisture curing urethanes.
|
|
|
DYMAX light-curable adhesives cure in seconds upon exposure to longwave ultraviolet light and/or visible light. Light-curable adhesives optimize the speed of automated assembly, enable 100% in-line inspection, and increase product throughput. Industrial adhesives are available for plastic sealing, metal bonding, and glass assembly, as well as for joining dissimilar substrates.
|
|
|
|
|
|
The Master Bond UV adhesive line of rapid cure, one component ultra violet curing adhesive systems includes high performance UV curing adhesives, coatings, sealants, potting compounds and encapsulation compounds. The performance of each application-specific light cure adhesive is optimized for high bond strength, to be durable and offer superior temperature, abrasion and chemical resistance. Master Bond UV adhesives include polyurethane, UV epoxy, polyester, acrylic and silicone. UV curable adhesives and epoxy offer seconds cure when exposed to a suitable UV light source. Upon UV light cure they exhibit minimal shrinkage. Additionally, the line includes EB and UV curable coatings with an extra-hard, super-abrasion resist for a radiation curable coating.
Master Bond invites you to take advantage of our "one on one" support policy offering prompt technical assistance from our experienced, professional staff. We will assess your problem and work with you throughout the design, prototype and manufacturing process. Master Bond products are manufactured under strict quality control standards.
|
|
Advantages of Vitralit® UV and light curing-adhesives:
Easy handling
Short curing time for higher productivity
Solvent-free, no heat exposure
Long storage at + 5° c
Very good electrical properties
|
|
UV curable pressure sensitive adhesive [solvent-free paste] that can be applied directly to parts or as films and then UV cured to create PSAs. These adhesives can be applied in a wide range of film or bead thicknesses and will cure within a broad range of UV dosages. Once cured they have an excellent balance of peel strength and creep resistance.
KEY FEATURES
* Initital tack in seconds
* Ultimate strength in hours
* Cure with UV light and adhere to part with instant adhsion
* Can assemble parts at a later time with no application of adhesive
* Little to no shrinkage
* Two viscosities for multi-applications
|
|
The Three Bond 3000 Series ultraviolet (UV) curing adhesives have been developed in our own laboratories to offer the finest combination of speed, strength and simplicity. They cure in seconds at room temperature and provide excellent bonding, sealing, coating and potting properties.
Three Bond UV adhesives are single component, solvent less resins which set when irradiated with ultraviolet light of wavelength 300 ~ 400nm. They can be perfectly matched to specific applications and in many cases offer secondary curing mechanisms such as anaerobic setting, thermosetting, moisture or primer setting to ensure complete curing even in shadowed areas.
|
|
|
|
|
|
UV Light Curable Adhesives
Permabond's continued customer focus lead to the development of our light curing adhesives product line.
Permabond UV Light Curable Adhesives are single part, solvent-free, cure on demand adhesives suitable for a wide range of applications. Upon exposure to UV light of the proper intensity and spectral output, these products rapidly cure to form excellent bonds to a wide variety of substrates such as metals, glass and most plastics.
Americas/Europe/Asia Product Selector Guide
Permabond UV light curing adhesives cure time is dependent on several parameters; however cure speed of 2 to 30 seconds can easily be achieved.
Permabond UV light curing adhesives are available in wide range of viscosities which facilitate the adhesive selection especially when automated dispensing equipment is required.
Permabond UV light curing adhesives are supported by a team of sales, customer service and technical professionals. This team will assist you in selecting the proper adhesive for you application or develop a product to meet your application's requirements.
Benefits of Permabond UV Light Curable Adhesives
Cure on Demand - allows proper alignment of components before bonding.
Speed - increase production by simply adding more lamps to the line.
Non-flammable and Solvent-free - provides a safe and comfortable work environment.
Single Part Product - No mixing required. 100% solids equal no waste.
Save energy and space - UV lamps require less electricity and space compared to ovens.
Appearance - UV adhesives provide a pleasing finished appearance.
|
|
|
The products in the ThreeBond 3000 Series are one-part, radical- and ultravioletcuring, nonsolvent adhesives that have been developed by the application of our research, our proprietary technologies, and our know-how. They are advanced industrial materials for use in sealing, bonding, and coating. They are recognized as cost-effective products for a variety of uses, such as the electrical and electronics industries, automobile manufacture, optics, and OA devices.
|
|
The paint job of containers in plastic material for electronic equipment concurs to obtain a valid shielding regarding irradiated electromagnetic interferences, offering moreover a protection against the electrostatic scariche (ESD).
All the varnishes are formulated on acrylic resin (conductive pigments dispersed in a resin binder).
The application happens to spray, manually or through devices automati to us.
|
|
|
|
|
|
Von Roll makes a wide variety of varnishes and resins for both low- and high-voltage applications based on alkyds, acrylics, urethanes, polyesters, polyesterimides, epoxies, and silicones. Most are specialized products that are optimized for a variety of processing techniques, such as Trickle, Roller Dip or Vacuum Pressure Impregnation (VPI).
Permafil® and Dolph® coating and finishing varnishes for electrical and electronic applications
Damival® two-component potting, encapsulating, and adhesive systems for electrical and electronic applications
Damilux® UV (ultraviolet)-curing glues or coatings for industrial and electronic applications
Permafil® and Dolph® impregnating varnishes and resins for electrical applications : rotating machines and transformers
Von Roll is committed to bettering our world by researching toxic-free and environmentally friendly solutions. Every year a large share of our research investment is dedicated toward materials that improve the performance of electrical equipment and reduce process costs yet help protect the environment.
|
|
|
|
|
|
NORPOL FI-184 is a vinyl ester based bonding paste for bonding polyester laminates giving joints with great strength and toughness.
NORPOL FI-184 is pre-accelerated and is changing colour from light grey to yellowish/brown <5min. after the admixing of peroxide.
•Recommended peroxide dosage: 2.0% CHP peroxide (NORPOL PEROXIDE 24)
•Recommended application temperature interval 18-23 ºC
•Sag/flow: Will not sag provided a maximum thickness of 20 mm is observed. Not horizontally self-flowing.
•Thicknesses up to 15 mm can be applied in one operation without causing cracks when curing
NORPOL FI-184 is suitable for machine application. We recommend running tests with the machine before starting the bonding job to ensure proper admixing of the peroxide.
VARIOUS PROPERTIES
Suitable surfaces: Glass-fiber reinforced products and cellular plastics.
Workability: Hard to grind.
The bonding paste should be stored at 18-25 ºC .If the product have a temperature <18 ºC (which is no problem as to product quality) it should be heated to 18-25 ºC before use. See storage and handling document of NORPOL products.
AVAILABILITY
Europe / Middle East / Africa
|
|
|
Aquabond's water soluble thermoplastic is designed for temporary mounting of hard materials for slicing, dicing, grinding, lapping and polishing. and comes in 3 different bonding temperatures that can be purchased in either stick or bulk form. The nomenclature depicts each product's melting temperature centigrade.
|
|
| ... products without technical information |
| |
|
|
Bonding, Adhesives
