|
|
Mapei's products, adhesives and chemical products for building contribute to the quality of life of whoever chooses the Mapei brand, enhancing the aesthetic beauty, the comfort and the safety of the environment in which we live. In fact, Mapei's products are everywhere in our homes, underneath our floors, in concrete pillars or in historic buildings, reinforcements which are often invisible, but nevertheless inseparable from the elements which they bind together with their adhesive strength. As well as solidity and stability, the vast range of performance characteristics and colours which many of the products offer are potentially a source of assistance and inspiration for architects and project planners as they seek to create ever more attractive and more secure structures.
Mapei's product portfolio is divided into the following categories: Adhesives for floors, ceramics and natural stoneware ; Grouts and elastic sealants ; Adhesives for resilient, wood and textile floor and wall coverings ; Products for the preparation of all substrates for building ; Special hydraulic binders ; Pre-blended mortars and special products for the recovery of concrete structures ; Mortars and binders for the recovery of stone masonry ; Additives for mortars and concretes ; Waterproofing compounds and anti-humidity agents ; Soundproofing systems ; Smoothing agents and protective compounds for outside walls ; Polystyrene foam heat insulation systems.
|
|
| Superfluid epoxy resin for injection. Epojet is used for monolithic repair of structures which have cracked due to overloading, impact, earthquakes etc; it is also used for bonding and structural strengthening by low pressure injection and for sealing cracks in cement screeds. Epojet is a solvent-free epoxy adhesive, consisting of two pre-measured components to be mixed together with an electric stirrer prior to use. After mixing, Epojet becomes a low viscosity liquid ideal for injection. Epojet polymerizes without shrinkage and is watertight after hardening. For monolithic repair of degraded structures, inject Epojet into the cracks with a pump. Horizontal cracks in screeds can be sealed simply by pouring Epojet directly into them. |
|
Master Bond offers a broad line of fire retardant and fire resistant adhesives, sealants, and coatings. Fire resistance has always been an important requirement for adhesives materials that are used in the assembly electrical / electronic products including those that have wide public use. Master Bond has specially formulated adhesives to meet the following criteria:
• resist burning,
• retain joint integrity at high temperatures,
• produce minimal smoke, and
• release negligible toxic materials when heated beyond its decomposition temperature.
Master Bond has numerous adhesives, sealants, impregnants, encapsulants, potting compounds and coatings classified as flame retardant by Underwriters Laboratories (UL) 94
|
|
Master Bond offers an impressive array of high performance, high temperature resistant epoxy and silicone compositions for service up to temperatures as high as 316°C (600°F). They include high strength structural adhesives which retain good physical strength properties even after prolonged exposure to unfavorable environmental conditions. Both one and two component compositions are available with a wide range of curing conditions so as to best meet specific service requirements.
Master Bond invites you to take advantage of our “one on one" support policy offering prompt technical assistance from our experienced, professional staff. We will assess your problem and work with you throughout the design, prototype and manufacturing process. Master Bond products are manufactured under strict quality control standards. |
|
Master Bond cyanoacrylates are available ethyl, methyl and high temperature resistant speciality grades. The different grades vary in viscosity, cure speed, strength, temperature resistance etc. Cyanoacrylates are “instant curing” solvent free adhesives which cure upon exposure to moisture at room temperature.
They will bond to almost any combination of dissimilar and similar materials including metals, rubbers, most plastics, glass and ceramics. Cyanoacrylates perform best when applied as a thin film between two surfaces and bond best on slightly alkaline surfaces. Primers are available to further enhance cure speed and adhesion to certain hard to bond plastics. Rapid cure, minimal surface preparation and easy application make them particularly suitable for high speed production applications. One pound of adhesive properly applied can provide for as many as 30,000 bonds.
Master Bond invites you to take advantage of our “one on one" support policy offering prompt technical assistance from our experienced, professional staff. We will assess your problem and work with you throughout the design, prototype and manufacturing process. Master Bond products are manufactured under strict quality control standards at its plant in Hackensack, New Jersey, U.S.A. |
|
Master Bond Inc. offers a broad line of electrically and thermally conductive adhesives, sealants, coatings and potting compounds which are widely used in the electronic, aerospace, optical and electrical industries. They are formulated with ceramic and metal powders/flakes such as silver, nickel, copper, graphite, boron nitride, aluminum nitride, aluminum oxide and silver-coated nickel. Our line includes electrically and thermally conductive epoxies, silicones and rubber based compounds. They feature excellent conductivity along with good physical strength and/or ease manufacturability
Also available are electrically conductive coatings which are widely employed for EMI/RFI shielding of plastic molded parts to prevent undesirable electrical interference. Compounds are available in hundreds of grades to meet your specific requirement. These vary from high strength, general purpose adhesives, sealants and coatings systems to highly specific “tweaked” applications. Master Bond invites you to take advantage of our “one on one" support policy offering prompt technical assistance from our professional staff. They have years of experience, and will assess your problem and work with you throughout the design, prototype and manufacturing process. |
|
Euremelt® Hot Melt Adhesives
Euremelt® has long been recognised as a leading range of optimum performance polyamide hot melt adhesives, providing the highest performance in a range of demanding market applications.
Key to the Euremelt® product range :
- Proven adhesive technology with over 30 years of industry experience.
- Extensive product range including thermoplastic adhesives to satisfy a wide range of required setting times.
- Superior in-service bond strength and heat resistance
- Industry leading technical advice for both chemical solutions and product application support.
- Excellent recycling characteristics
Euremelt® hot melt adhesives are widely used in many industry applications including automotive, textiles, electro and electronics, packaging and furniture. |
|
Quality & Reliability:
TECBOND adhesives are manufactured to exact tolerances, which vary according to the formulation. The size of
the cartridge is critical to the safe & reliable operation of the TEC glue guns. Using nonstandard adhesives will create problems in these areas
To make it easy to identify and trace our high performance TECBOND
adhesive, the sticks and slugs are printed with the formulation reference and manufacturing batch number. |
|
Finally, Die-Attach connections on power components can be bonded with adhesives - quickly and reliably - without lead.
The new conductive adhesive was developed by Umicore and is unique to the market. Now every electronic system can be truly lead-free - no exceptions and across every temperature range. |
|
Advantages of Vitralit® UV and light curing-adhesives:
Easy handling
Short curing time for higher productivity
Solvent-free, no heat exposure
Long storage at + 5° c
Very good electrical properties
|
|
The UV Light Cure ® resins are one component products that cure in a few seconds under ultraviolet rays. They are intended, for the most part, for the assembly of translucent materials like glass and transparent plastics (PMMA, PC...). On top of their curing speed, the Light Cure® resins are ideal for high production speeds. For the most pari they will give a perfectly transparent jointing, of optical quality, with extreme resistance and excellent protection against Chemicals.
The polymerization takes place in a few minutes to a fraction of a second. AEC adapts the priming of the resins, and thus the timing of the operation and the application to the base. The glues go from liquid to extremely sticky thixotropic. |
|
UV curable Adhesives, UV curable conformal coatings and UV curable encapsulants for electronic materials assembly cure upon exposure to ultraviolet light in seconds. DYMAX solvent-free UV curable adhesives, conformal coatings and encapsulants are ideal for circuit board assembly, flex circuit encapsulation, peelable and water soluble masking, tamper-proofing, potting and strain relief. IPC MIL Spec and UL approved and multiple viscosity grades of these adhesives, conformal coatings, masks and encapsulants are available.
DYMAX UV curable conformal coatings can be applied over the entire PCB surface or discreet areas to provide complete protection from harsh environments or solvents. UV curable Encapsulants protect components on rigid or flexible boards to -40°C. UV curable peelable and water soluble masks are easy to apply and remove, and are designed for manual or fully automated masking of printed circuit boards prior to wave solder or reflow operations. One-part and two-part potting compounds can achieve full cure in seconds and dramatically reduce cycle times and costs. DYMAX UV curable thermally conductive adhesives transfer more heat and bond faster than competitive products. |
|
NORPOL FI-177-10 is a low exothermic, light-weight sandwich adhesive based on a high quality ISO/NPG resin. NORPOL FI-177-10 is accelerated and is changing colour from light blue to white shortly after the admixing of peroxide.
•Recommended peroxide dosage: 1.5% low exothermic Peroxide (NORPOL PEROXIDE 19)
•Recommended application temperature interval 18-23 ºC
VARIOUS PROPERTIES
NORPOL FI-177-10 is mainly used to bond single core material sheets together and for bonding core material to GRP laminates.
NORPOL FI-177-10 is formulated for use in vacuum bagging.
The bonding paste should be stored at 18-25 ºC .If the product have a temperature <18 ºC (which is no problem as to product quality) it should be heated to 18-25 ºC before use. See storage and handling document of NORPOL products.
AVAILABILITY
Europe / Middle East / Africa |
|
Master Bond manufactures a number of formulations specifically for marine applications. These formulations cure in low temperatures even under damp, wet or underwater conditions to produce hard, tough and highly corrosion resistant bonds, seals, patches, linings and coatings. Master Bond polymer systems offer unique protection against the effects of moisture by displacing water from the surfaces being bonded or coated until complete attachment of the compound's molecules to the surface is achieved. Any water present is removed until the bonds formed are complete and water proof.
A number of polymer systems have proven highly effective in the boat industry for repair of cracks and holes in hulls, installation and repair of hulls fittings, stopping seepage in the bridge, coatings for permanent protection against water damage. Other marine applications include linings and coatings for tank coatings of ships for crude oil and ballast sea water, condensers, oil coolers, piers, bulkheads and offshore drilling towers. The cured materials exhibit excellent chemical resistance to water, organic and inorganic acids, bases such as sodium hydroxide and ammonium hydroxide, petroleum hydrocarbons including fuels and hydraulic fluids, ethylene glycol, ethanol, butanol and many other chemicals. |
|
Master Bond Inc. is a leader in the design, formulation and manufacture of adhesives, sealants, coatings and potting compounds for the assembly of both disposable, reusable and implantable medical devices. Master Bond’s product line includes epoxies, urethanes, silicones, cyanoacylates, and specialty solvent based systems. These products can be cured at ambient and/or elevated temperatures or by exposure to UV light. Specific formulations fully meet the USP Class VI protocol. Master Bond’s technical staff welcomes the opportunity to provide assistance to medical device manufacturers in the solution of specific assembly problems.
Master Bond's compounds can simplify and enhance the performance of many critical medical devices. Formulations have been developed which offer high physical strength properties and outstanding chemical resistance even when applied on dissimilar or difficult-to-bond materials. Additionally, selected products retain their desirable performance upon exposure to various sterilization procedures including autoclaving, radiation, ethylene oxide and the recently developed cold sterilants. These compounds can be used in a wide variety of devices such as diagnostic instruments (endoscopes, etc.), surgical tools, catheters and implantables. |
|
Excellent bonding with vitralit® UV-/light curing adhesives:
Outstanding resistance against all current sterilization processes
Very good bonding on several plastics and metals
Solvent free
1-Component cyanolit® Instant adhesives
Fast curing
Solvent free
Excellent dispensing properties in automated systems |
|
Collano's powerful hot melt adhesives, water-based dispersions, and thermoplastic adhesive films for medical products have met the requirements of the medical devices industry for two decades.
Test results pursuant to ISO 10993-5/-10 (cytotoxicity, skin irritation, and skin sensitization) are available for most products. In 2005, Collano's development, manufacturing and sales of hot melts for medical products was certified to ISO 13485:2003. Collano does not use critical ingredients such as rosin derivatives, terpenes, resins, and natural rubber latex |
|
| DYMAX cyanoacrylate adhesives offer exceptional product stability and faster cure speeds over other cyanoacrylates. DYMAX high strength Multi-Grade™ CA301 Series instant adhesives can replace many different grades of both methyl and ethyl cyanoacrylates due to their ability to adhere to a wide range of substrates. A DYMAX CA301 Series cyanoacrylate can lower costs by reducing the number of inventoried cyanoacrylate adhesives necessary for manufacturing. Methane base and isopropyl alcohol base adhesive accelerators, as well as adhesive primers, are available to increase the cure speed and improve the adhesion of cyanoacrylates |
|
No Grinding or Surface Preparation
Plexus Adhesives bond engineered plastics, SMC, FRP, metals, and dissimilar substrates without grinding, surface preparation, or primers. As a result, they eliminate time-consuming and costly operations, lessen process variability, minimize dust, and greatly reduce the problems associated with toxic solvents. |
|
Master Bond Inc. is a leading manufacturer of high performance adhesives, sealants, coatings, potting and encapsulation compounds and impregnation resins. Our line of products consists of epoxy adhesives, polyurethanes and methacrylate systems among others. One and two component systems are available. Systems cure at room temperature, exposure to heat and upon exposure to UV light.
Epoxies are the most widely used polymeric materials. Their desirable properties include high bond strength to a wide variety of different substrates, outstanding gap filling capabilities, excellent electrical insulation, high chemical inertness and outstanding resistance to shock and vibration. Our polyurethane products feature superior strength, toughness and chemical resistance. They are available as both one and two component compositions and are offered in a wide variety of viscosities, cure speeds, hardness, strengths, chemical resistance and flexibilities. Other noteworthy properties include abrasion resistance, superior physical strengths and gap filling properties. Master Bond methacrylate systems are high performance thermoplastics featuring superior optical clarity, abrasion resistance and good physical strength properties. |
|
Axson Technologies developed a broad range of structural adhesives able to be integrated in the majority of the applications using this method of assembly.
The epoxy resins, polyurethans and methacrylates have high characteristics of adhesion on a variety of supports traditional such as wood and metal but so complex, such as alloys, thermoplastics or composite materials for industrial applications. These assemblies can be flexible or elastic but also extremely resistant within the framework of specific structural joinings for example. AXSON TECHNOLOGIES is a specialist recognized in the structural joining equipped with a specific competence in joining metal - plastic and plastic - plastic.
The principal applications are the following ones:
* Applications of universal joining (all confused industries)
* Joinings of panels
* Automobile equipment (manufacturers of small size and vehicles of small series special vehicles and luxury)
* Automobile subcontracting (joining of subsets)
* Market of construction and decoration (joining of tiles and noble stones)
* Rail-bound transports (joining and insulation of doors)
* Market of filtration (clean rooms, dialysis filters)
* Market of naval construction and the water sports (methane tankers, blades of wind mills, joining of various elements) |
|
|
|
Bonding, Adhesives
