|
|
|
VersaDrum bulk melters deliver precise application of hot melt adhesives, sealants and butyls. Modular, non-stick platens, available for 200-liter (55-gal) drums, melt adhesive on top surface of drum only, reducing thermal stress and protecting bonding characteristics. Elimination of dead spaces in hydraulic passages makes VersaDrum melters well-suited for reactive adhesives.
|
|
|
ITW Dynatec's Hot Melt Glue Applicators are air-operated or pump operated hot melt adhesive applicator assemblies. These glue applicator systems work with the adhesive supply unit and hot melt hose to automatically apply the adhesive to the product in a consistant and accurate mannor.
|
|
|
|
|
|
ECLYSS 5-8 KG 2000-M SERIES PISTON PUMP
The ECLYSS 2000 - M Series of hot–melt applicators were designed for the application of adhesives and thermoplastic material with viscosity 500 and 30.000 Cps. The opportunity to choose between different tank sizes, combined with the option of mounting various microprocessors up to 4 channels with relative glue pattern control, renders the ECLYSS Series very versatile and suited for use in all fields of application, to satisfy the needs of the most demanding customers, where restricted dimensions or reduced glue quantities are necessary. The applicators are equipped with 5 and 8 kg tanks with heated ribs along the base of the tank to increase melting capacity and ease the flow of glue towards the bottom of the tank. All the parts touching the adhesive are coated with a special high temperature scratch-resistant PTFE non-stick surface, this prevents the glue from forming films that could be quickly transformed into carbonaceous residues, which cause premature wear and operational difficulties.Attention to design detail enables the glue filter to be easily reached and replaced. A combination of better adhesive distribution and the Preo progressive melt system prevents the nozzle from blocking due to adhesive residues.All ECLYSS Series applicators are equipped with either pneumatic or gear pumps. The pneumatic pump is a double-acting piston with a compression ratio of 13:1 and electric reversing system eliminating the pulsating effect of a single acting pump, and is recommended for adhesives up to 30,000cps.
|
|
Diamond Head
The world’s first fully insulated application head for hotmelt, the new
SX Diamond application head
Save and safe !
Precise and long lasting
”SX-Diamond” the application head
The first insulated application head for hotmelt !
Durability and precision are reflected in „Diamond“
|
|
|
When it comes to hot melt glue supply units ITW Dynatec leads the industry. We manufacture a complete line of innovative adhesive supply units for low, medium and high-speed packaging operations. No matter what you need, Dynatec has the right hot melt glue supply unit to fit your needs.
|
|
We asked our customers what they needed in the next generation of hot melt dispensing systems. And you told us.
The result is four lines of melters with features that give you top performance and productivity for your operation. Blue Series melters let you:
- Simplify daily operation.
- Reduce maintenance and associated costs.
- Speed up and ease installation.
- Connect and communicate with other melters and line machinery using standard industrial network protocols.
- Expand to meet future requirements.
- Minimize parts inventory with compatibility to previous-generation Nordson products.
Blue Series melters are the most carefully engineered and thoroughly tested products we have ever manufactured.
Best of all, Nordson Blue Series melters deliver the same superior performance and outstanding reliability that are the cornerstones of all Nordson products.
|
|
|
|
|
|
Large Tank Melters
The hotmelt application systems of the Jumbo and Premelt range are suitable for high melting capacities. They melt and feed thermoplastic adhesives of granular or block form.
Jumbo:
- Volume metering by means of gear pumps with closed loop control for precise glue application.
- Three Tank sizes of 55, 80 und 160 Litres
- Up to 4 gear pumps in 6 different sizes
- Dynamic drives ensure pulsation free application
- Simple operation by language independent operating field
System extensions
- Integrated pattern control for the precise control of up to 8 application heads
- System integration into the host machine by means of: Profibus, SNMP, Ethernet, CAN-Bus, ASI-Bus, RobaPAR
Options & accessories
- Quantity Control
- Electronic glue pressure control and regulation
- Granule feeder
Premelt
- To premelt thermoplastic adhesives for automatic filling of roller troughs and other adhesive containers with liquid hotmelt.
- Fix pump speed. The feeding quantity is controlled by the switch on time.
- Two tank sizes of 80 und 160 Litres
Options & accessories
- Trough heating kit
- Granule feeder
Robatech systems are featuring
- Full modularity and compatibility, system solutions by combining modules
- Few spare parts needed
- Field proven products, low maintenance cost, low life cycle cost
|
|
Applications:
Heating or heat-loss free transport of: oil, grease, wax, resin, glue, hotmelts, tar, paint, water, carbon dioxide, plastics, sealants, etc.
|
|
|
|
|
|
Nordson DuraBraid hot melt handgun hoses operate safely with improved durability and performance that reduces costs and downtime.
New rugged, wear-resistant braid covering exterior eliminates cumbersome corrugated wrap, retains flexibility and improves durability.
Hose covering withstands abrasion caused by friction or dragging of the hose on workbenches or other surfaces in handgun applications.
New gun cuff design that improves the durability of the AD31 hoses in aggressive high-movement applications.
Aramid insulation significantly improves chemical and moisture resistance.
Insulation does not melt or support combustion in the air, allowing hoses to retain flexibility and electrical mechanical properties beyond system operating temperatures.
Hose components are precision fabricated and calibrated prior to assembly, eliminating the need for temperature control calibration at installation.
Controlled watt-density heating element minimizes hot spot potential, reducing char.
Fits all Nordson handguns including AD-31 and AD-41
|
|
|
The HME-500 are particularly suitable for high production speeds with simultaneous high demands on accuracy and cleanliness. They combine the Baumer hhs competence from electromagnetically operated cold glue technology with the special features of hot-melt application.The HME guns are extremely quick switching, free from wear and tear and maintenance friendly. Their compact design without compressed air connection and solenoid gun allows the installation even in the smallest gaps. The use of high quality materials and ideal heat distribution not only guarantee long life but also optimum quality of the glue application.
|
|
|
|
|
|
GLUE DETECTOR CIA SERIES
It was specially designed to check automatic high speed gluing lines. The device detects each drop of glue and checks its continuity; moreover it indicates any possible anomaly in real time. It perfectly complements any existing dosing system because it is a completely autonomous device that is able to reduce production scraps almost to zero. The detection process is the passive infrared one: an innovative sensor is able to detect the infrared rays emitted by the drop of glue in real time, when available, with a detection time lower than one thousandth of a second. A powerful microprocessor makes sure glue detection, glue deliveries and alarm signals are properly synchronized thanks to the machine encoder and/or the quartz chronometer. This process is completely automatic even on variable speed lines. The device manages an instantaneous and a proportional alarm level and a practical piece-counter function. The optical measuring head is equipped with an air-operated cleaning system, so that it maintenance operations are not necessary even in very dusty environments. CIA Series Glue detector main topics are: real time detection of every deposited glue dot by infrared; real time signalling and report of every anomalies; complete control from microprocessor; full integration and compatibility with every existing dosing system; reduction to “ZERO” of production scraps; Installation completely independent; maximum flexibility with instantaneous and per cent alarm signals; optical head with pointing system fully automatic; auto-cleaning air system for dusty environment.
|
|
Adhesive application my be as reliable as possible, but various companies and their customers require a proof, which products are erroneous, and moreover what percentage of the lot is.
Depending on application area, type of glue or its form there are different ways to check glue. Baumer hhs has an option for each application.
Cold Glue Sensors: Directly after application they detect, whether and where glue dots or lines can be found. If glue is alrady dried up, it is assumed not there.
Side Seam Sensors: Not only check if glue is there, but also its quantity. They are used to rate the gluing results from wheel pots.
Flow Rate Sensors: Built within the hose directly before the gun, they check whether glue has flown. This process is needed, when glue can not be seen after its application, for example in bore holes for dowels.
|
|
|
|
|
|
Jetting Heads
The proven SX- and AX100 jetting heads are applying low- to medium viscose hotmels very precise and without stringing in form of dots or bead pattern. The pneumatically actuated applicator heads are characterized by their high reliability, a minimal need for maintenance and the modular structure.
Jetting Heads SX
* Small dimensions – ideal for smallest space conditions and box formats
* Fast switching – higher machine speeds
* Excellent cut-off – no tripping or stringing
* Integrated filter - prevents nozzle blocking
* Double acting jetting elements
* Long lifetime
Jetting Heads AX100
* Lasting and operationally safe
* Precise and reliable
* No drooling or stringing
* Proven modular design
* Exact temperature control
Jetting Heads AX300
* Medium to higher volume
* Thermoplastic Adhesives, PUR Hotmelts, Sealants, Butyl
* Nozzle diameter 1 … 3.5 mm
* Improved tear-off by means of auxiliary air nozzle (option)
Robatech systems are featuring
* Full modularity and compatibility, system solutions by combining modules
* Few spare parts needed
* Field proven products, low maintenance cost, low life cycle cost
* Swiss quality
|
|
The 2800 Series positive displacement dispensers are ideal for applying uniform amounts of two-part epoxies and other fluids that change viscosity over time.
Compressed air is not required%u2014instead, these electrically operated units use stepper motors and patented technology to advance and retract a piston inside the syringe barrel. They will produce accurate, repeatable deposits, regardless of changes in fluid viscosity or temperature.
|
|
EFD's Ultra® 2800 Dispensing System is perfect for applications that require precise metering of assembly fluids with changing viscosity or where a specific flow rate is necessary.
The system features a unique, patented technology that gives the user precise, repeatable results %u2014 regardless of changes in fluid volume, viscosity and temperature. This technology eliminates the need to adjust settings throughout the syringe barrel dispensing cycle, including the need to compensate for changes in fluid viscosity.
The 2800 System is electro-mechanically operated and does not require the use of compressed air. A powerful stepper motor is contained in the benchtop controller, keeping the handheld drive cable lightweight and easy to use .
|
|
|
|
|
|
Large Tank Melters
The hotmelt application systems of the Jumbo and Premelt range are suitable for high melting capacities. They melt and feed thermoplastic adhesives of granular or block form.
Jumbo:
- Volume metering by means of gear pumps with closed loop control for precise glue application.
- Three Tank sizes of 55, 80 und 160 Litres
- Up to 4 gear pumps in 6 different sizes
- Dynamic drives ensure pulsation free application
- Simple operation by language independent operating field
System extensions
- Integrated pattern control for the precise control of up to 8 application heads
- System integration into the host machine by means of: Profibus, SNMP, Ethernet, CAN-Bus, ASI-Bus, RobaPAR
Options & accessories
- Quantity Control
- Electronic glue pressure control and regulation
- Granule feeder
Premelt
- To premelt thermoplastic adhesives for automatic filling of roller troughs and other adhesive containers with liquid hotmelt.
- Fix pump speed. The feeding quantity is controlled by the switch on time.
- Two tank sizes of 80 und 160 Litres
Options & accessories
- Trough heating kit
- Granule feeder
Robatech systems are featuring
- Full modularity and compatibility, system solutions by combining modules
- Few spare parts needed
- Field proven products, low maintenance cost, low life cycle cost
|
|
The unit melts granules and transports them through the heated hoses to the application heads under pressure. Various tank sizes are available.
You can connect up to 8 Xmelt® hoses.
|
|
The universal adhesive spray gun PILOT III-K is exclusively suitable for solvent-based adhesives. In the automobile industry, the model PILOT III-K has proven itself many times, particularly in the manufacture of upholstery and in lamination. The body is coated with TEFLON® for comfortable cleaning.
Rotary jet nozzles are used so that the adhesives can be processed easily. Nozzle sizes: 1.0 / 1.5 / 1.8 / 2.0 mm Ø. The nozzle insert is designed such that material deposits on the air cap are avoided. PILOT III-K is available as a gravity-feed cup gun, as a siphon-feed cup gun, as a gun for pressure tanks or for connection to piston or diaphragm pumps. 10 years supply guarantee for spare parts.
|
|
|
OK International offers dispensing syringes and needles to meet all of your dispensing needs. Our components are silicone and chloride freeand work with industry standard equipment.
|
|
UV Block
Amber syringe barrels block UV and visible light wavelengths between 240-550 nm, while allowing fluid level to be monitored. Available in 3cc, 5cc, 10cc, 30cc and 55cc capacities.
Light Block
Opaque black syringe barrels provide complete protection for light-sensitive fluids. Available in 3cc, 5cc, 10cc, 30cc and 55cc capacities.
|
|
KOLA Tape dispenser is designed for more productive uses: gift wrapping, cashier, and in various other shops.
There are 2 funcitons:
(1) Cut many tapes at once - same length (by turing the handle)
(2) Cut tapes Manually - any length (by pulling the tapes by hand)
It is becoming more important to have more convenient and productive operations in our workplaces, and our tape dispenser will help gaining higher productivity!
Please do not hesitate to contact us for more information.
|
|
Self adhesive tape roll:
Width 50 mm.
Internal diameter76 mm.
External diameter145 mm.
Adjustable clutch
Blade Protection
Ergonomic Handle
Packed in printed box
Available Personalization
|
|
zcM1000 ( M1000 ) ELECTRONIC TAPE DISPENSER
- Ideal for medium to high production of repetitive taping for industrial applications
- Program a defined length and automatically advance and cut tape
- Accepts tape widths from .28" to 2" (7 to 51mm)
- Cuts tape lengths from .79" to 39" (20 to 999 mm)
- Photocell actuated feed & cut or push-button feed & cut
- LED Digital length adjustment
- Manual override of preset lengths
- Blades good for up to 200,000 cuts (dependent on type of material)
- Steel frame for durability
- Cabinet made from flame retardant antistatic composite (auto ignition of 896°F/480°C)
- Comes with a 3 in 1 core (3" (76mm), 35mm, 1” (25mm)
- Adjustable pressure roller for different thickness’ of tape
- Accuracy of tape length is +/– .04” (1mm) (dependent on type of material)
- Many available accessories fit this machine. See Accessories section.
- Used in Manufacturing Plants World-Wide for 20 Years
|
|
|
UV curing flood lamps, spot curing lamps and UV conveyors can be integrated into existing manufacturing assembly lines or used as stand-alone, bench-top curing systems. DYMAX UV curing lamps provide clean, worker-friendly cures and are ideal for industrial UV bonding, coating, encapsulating, potting and sealing applications. UV curing systems are used world-wide throughout the automotive, electronic, industrial, medical and optical industries.
|
|
The OmniCure® Series 1000 is the building block of our OmniCure® Platform, the first system to provide excellent versatility in a cost effective UV/Visible Spot Curing System that is ideal for manual applications.
The OmniCure® Platform of products are leading edge spot-curing systems, that deliver stronger, faster cures than traditional assembly methods. This results in improved quality, faster production and reduced manufacturing costs. The OmniCure® technology also offers unmatched control, allowing users levels of customization and precision making these systems the most advanced of their kind worldwide
|
|
The OmniCure® S1500 delivers power, control and reliability in an extremely cost-effective, affordable and easy-to-use spot curing system, offering excellent value for high-volume, automated manufacturing requirements such as microelectronic and optoelectronic manufacturing applications.
The OmniCure® S1500 includes the powerful and patented 200 Watt Intelli-Lamp® with a typical lamp life of up to 4,000 hours and a 2,000 hour guarantee. Quick and effective curing is achieved with high UVA irradiance of up to 10W/cm2.
|
|
|
The leading edge OmniCure® Platform delivers stronger, faster cures resulting in improved quality, rapid process development & reduced manufacturing costs. The OmniCure® S2000 UV/Visible Spot Cure offers revolutionary lamp & power supply technology to minimize lamp degradation & ensure long operating life. The lamps also include our patent Intelli-Lamp® technology that tracks actual lamp hours & monitors lamp performance to maximize the maximum number of useable hours. The OmniCure® S2000 includes Closed Loop Feedback technology that monitors lamp degradation & adjusts iris to compensate ensuring consistent light intensity. An internal monitor continuously monitors light at the source & automatically makes adjustments to maintain the user’s selected set point.
|
|
Online UV Curing System
ADVANTAGE OF UV. TECHNOLOGIES:
The use of UV. Technology offers many advantages for all print process, including the ability to print on non-absorbent materials. The use of solvent free inks or varnish, immediate further processing and extremely high chemical and abrasion resistance.
UV. Curing System is a crosss chemical reaction when UV. Varnish, Ink applied to object and it pass through under UV. Light. It get cure instantly UV. Curing Systems are available in different sizes and power.
On Line UV. Curing Systems means to put UV. Lamp Direct on Printing Machine. It can be Offset, Flexo, Gravure, Web Offset, dry Offset or Letter Press. We make customize UV. Curing System as per customers desire. We install UV. Curing on site at machine in different sizes and wattage. We are specialized to install Hot and Cold UV. Curing systems on the Machine.
|
|
Specifications©U
1.Max product width: 400mm
2.Max product length:320mm
3.Printing speed :1800~3000Pic/Hr
4.Conveyer speed: 0-10m/min
5.UV lamp power:4Kw
6.Total power: 7Kw
7.Power supply :AC 380V/ 50Hz 3-Phase
8.Machine size:(LxWxH)2100x750x1810mm
9.Machine weight:353Kg
Advantages: 1.Suitable for the UV Ink printing cure on round,oval,flat bottles and cylindrical substrate.
2.By adjusting its lighting angle, it can also be used in the UV Ink printing cure of flat or curved substrate;
3.Enclosure construction with conveyor. Apply half light (3KW) or full light (6KW) tubes, the distance is adjustable;
4.On the top of the machine equipped with an exhaust system, you can vent the inside heat of curing chamber .
|
|
| ... products without technical information |
| |
|
|
Bonding: Equipment and accessories
