|
|
ThreeBond 2706 is a heavy-duty degreasing cleaner in aerosol form. It is for use in cleaning many surfaces, such as paint surfaces, bonding surfaces, and sealing surfaces, and those of mechanical parts. It contains no chlorofluorocarbons (CFCs), which are harmful to the environment. It is not subjected to the Organic Solvent Intoxication Prevention Regulations of Japan.
·Easily and quickly removes rust-inhibiting oil, grease, machining oil, and other materials, even from narrow gaps, by the combined effects of the chemical cleaner and the pressure of the gas emerging from the can.
·Has minimal effect on rubber and plastic, and does not corrode metal.
·Is safe to use, because it contains no CFCs. It is not subjected to the Organic Solvent Intoxication Prevention Regulations in the Industrial Safety and Health Law of Japan or by the fire safety regulations.
|
|
BIOSANE T 212 has been designed in order to answer all extreme
needs: non-measurable flash point, ultra fast evaporation speed,
solvency power meeting all requirements, compatibility with most
of the substrates.
BIOSANE T 212 complies with standard : AIR 0011 certificate N°072
(aeronautics aptitude).
The flash point of BIOSANE T 212 is not measurable, its evaporation
speed is 10 mn and its solvency power is 64 (KB index).
|
|
BIOSANE T 222 is a technical fluid of degreasing, ultra-pure, whose
physicochemical characteristics are directly comparable to chlorinated
solvents. Moreover, it solves the disadvantages in the field of toxicology
and environment.
SUBSTITUTE TO CHLORINATED SOLVENTS
GUARANTEED WITHOUT HCFC 141 B, FREE FROM CHLORINE
GUARANTEED WITHOUT GLYCOL ETHER
EVAPORATION SPEED ULTRA-FAST
HIGH SOLVENCY POWER
COMPATIBLE WITH THE MAJORITY OF PLASTIC MATERIALS
STRONG CAPACITY OF DECANTATION
For more information, please consult www.mmcc.fr
|
|
DETERNET C 300 is a special "hard cleanings" detergent which is suitable for elimination of all kinds of pollutions. It is particularly recommended for ink and resin cleanings.
DETERNET C 300 is an autoactive system with remover, cleaner, washer, degreaser and disincrustant power.
|
|
Electroerosion is a process of machining primarily used for the manufacture of moulds or matrices to the various forms and which consists in removing matter by the action of an energy dissipated between an electrode, having the opposite form, and the metal part machined. Two principal phases will be distinguished: "the outline" (or phase of driving) which results in a fast and important removal of the matter and the "completion" where, work, slower and more precis, conduit with obtaining suitable surface qualities.
The Process, opposite exposed, explains how are held the various phases of the operational cycle and emphasizes the importance of the stability and the Canal control of Ionization which conditions the quality of work obtained.
|
|
Ideal for electrical/electronic and fine parts
Cleans and degreases delicate precision mechanisms
Penetrating action removes oil, grease, dirt,
flux and other contaminants
Does not contain chlorinated solvents
Low odor
Fast evaporation
No residue
Safe on metal, plastic, rubber, paint, fabric
and glass surfaces
Approved by Agriculture Canada for use in
food processing plants
Inverta Spray Valve lets you spray in
an upright or inverted position
NSF registered category K2
|
|
Electronic Cleaning Solvent Plus
Ref: ECSP
Super fast evaporating cleaning solvent
Removes grease, dirt and most fluxes
Completely residue-free
Highly flammable - not to be used on live equipment
|
|
|
HCFC Free cleaner ideal for sensitive electrical and electronic parts. The nonconductive and noncorrosive cleaner dries in seconds with no rinsing required. Removes grease, oil and other surface contaminants. Safe on all metal surfaces and many plastics. Level 1*
|
|
|
PolyOne’s Maxxam™ FR flame-retardant polyolefin compounds and masterbatches are engineered to meet stringent flammability performance requirements defined by industry agencies, including Underwriters Laboratories®. Standard compounds conforming to UL 94 V-2, V-0 and 5VA performance ratings are available, with many compounds in the Maxxam FR portfolio offering elevated Relative Thermal Index (RTI) ratings. Specific grades are available for processing into injection molding, extrusion and blow molding applications.
|
|
DETECT FUITES makes it possible to immediately locate any gas or air leak .
Checking of the sealing of pipings, taps, connections, valves of drains, without stopping their operation.
Usable for all types of gas and compressed air, including nitrogen and CO2. Warning, not to use on pure oxygen.
Detect even the mini-leaks, as well as the leaks under low pressure (7 mbar).
Higher ergonomics: All way product, usable with a capillary for a better precision of application, or with a diffuser '' broad cone '', to quickly check wider surfaces.
Biodegradable, non flammable, nontoxic and non corrosive product.
JELT DETECT FUITES Aerosol 650 ml Ref. 005501
|
|
OKS 2531
Alu-Metallic
Decorative corrosion protection based on aluminium powder for ferrous metals. For touching up hot-galvanised surfaces. Can be welded through. Fast-drying. Abrasion-resistant. Protects vehicle exhaust systems. Optimal when combined with OKS 2511.
|
|
MV 200 is a multi purpose solvent with short drying time.
It can be used as metallic and plastic parts degreaser, ink remover in printed graphic arts, adhesives, glues and resins remover, surface preparation before gluing or painting, brake parts cleaner, electrical instruments cleaner.
|
|
Our range of stable gels are pecifically designed for ultrasonic inspection.
Thixotropic properties give excellent wetting and acoustic transmission.
Non-corrosive to most metals, non-toxic and safe to user & environment.
|
|
BIOSANE T 218 & T 218 TB is grease-removing, substitute with the HCFC (HydroChloroFluoroCarbure), in the operations of washing.
Speed of evaporation identical to the HCFC, usable cold or in vapor phase, improved surface tension, Ozone Depleting potential = 0, which can be recycled.
These products are technical fluids of degreasing azeotropic whose characteristics physico-techniques are directly comparable with those of technologies HCFC, however they solve the disadvantages of them on the environmental level.
|
|
|
WATERCLEAN has been developed to provide an environmentally safe and effective water-based alternative to solvent washing for the removal of surface contaminants. Waterclean is non-hazardous, non-flammable and won't harm the surface, eliminating sanding and/or solvent washing when preparing parts for painting, bonding or other processes that require a completely clean surface.
|
|
|
Molykote® dispersions are finely dispersed solids or other lubricants suspended in lubricating fluids. They are preferred where it is necessary to apply solid lubricants in liquid form to units in operation or to otherwise inaccessible points. Some dispersions serve as antiwear and extreme pressure additives for lubricating oils like gear and engine oils.
|
|
The ALL WAY SUPER DEGRIPPANT is a mixture of hydrocarbons and light oils, with antirust agents.
It is especially designed to ensure the releasing of all parts or sets.
|
|
Penetrating Fluid
Ref: DGT400
Grease prevents squeaking in mechanical assemblies, e.g. locks, hinges, etc
Ideal for breakdown and maintenance services
Penetrates and lubricates mechanical parts
Produces a highly water resistant film, providing long term corrosion protection
|
|
Loosens Frozen Metal Parts!
An industry proven penetrating oil that has no equal. Quickly loosens
rusted nuts and bolts - frees frozen shafts, pulleys, etc. Penetrates to 1
millionth inch spaces, dissolves rust, lubricates, cleans and prevents rust.
Displaces moisture. The oil that creeps. Used by 480 of the Fortune
500 companies!
|
|
Nonflammable CO2 propellant
Displaces moisture
High flash point of 175° F (79° C)
More usable contents per can
Protects against corrosion
Loosens rusted or frozen parts
Excellent protective coating for power/hand tools
Does not contain CFCs, chlorinated solvents or
silicones
Authorized by the USDA for use in federally
inspected meat and poultry plants
Nonconductive
Safe on fabric, plastic, rubber, paint and other finishes
Plant Engineering 1995 Product of the Year
Inverta Spray Valve lets you spray in all directions
|
|
Multi-functions Ultra
Five functions in one : fights off humidity and corrosion, lubricates, cleans and frees rust
Resist the extreme temperatures (- 40°C +200°C).
Net volume: 500 ml
|
|
|
The products in the ThreeBond 6100 series are rust-inhibiting paints for automobiles. The series includes paints suitable for wheel wells, underbodies, and brake calipers. A waterbased, environmentally friendly type is available.
|
|
Graphited Penetrating Oil!
Oils and solvents dissolve rust and grease, carry graphite into
infinitely small places for long lasting lubrication.
|
|
Loosens Frozen Metal Parts plus Silicone!
Kroil penetrating oil plus silicone for faster penetration,
lubrication, water displacement, and rust prevention.
|
|
Solvent based sealer and anti-fouling agent.
This product forms a film on the mould surface reducing micro porosities and mould fouling.
Bouchex EB360 smoothes and improves the surface state of new or old moulds. It increases the release agent performances and through its action it reduces cleaning and waxing frequencies.
Advantages
Avoids and seals the micro porosities.
Limits the mould fouling.
Reduces wax application.
Smoothes the surface: excellent primary coating before wax and release agents.
Improves the release agents' efficiency.
Coating supports use temperatures up to 450°C.
|
|
Rust Remover - Fast - Easy to Use
Dissolves rust fast - easy to use. Concentrated Exrust chemically dissolves rust, cuts through grease. Thoroughly cleans metal surfaces. Simply soak rusted part -or apply to rusted surface - rust disappears. After treatment any type finish can be applied. Available in 16 oz. 1, 5, 15, and 55 gallon containers.
|
|
Heat Transfer Compound Non Silicone PLUS
Ref: HTCP
Excellent thermal conductivity: 2.5 W/mk
Easy and economical to use
Silicone-free thermal pastes
Excellent non-creep characteristics
|
|
C2
Choose for compounds retained too strongly on C8
C2 Specifications
Functional Group: Ethyl (C2)
Base: 50μm irregular silica, 60Å
Endcapped: Yes
Percent Carbon Loading: 5.5%
Retention Mechanism: Reversed-phase
C2 Extract-Clean™ Columns
|
|
|
|
|
|
Comprehensive range of high corrosion resistance coatings:
GALVA FLASH
A high aluminium content cold galvanising spray with exceptional brilliance. Appearance of molten zinc that has been treated in a hot-dip galvanisation bath. Ideal for weld retouching and protection. Smooth, uniform, drip-dry film.
GALVA BRILLANT
A zinc/aluminum content cold galvanising spray designed for the retouching of metal parts.
GALVA MAT
A high zinc content cold galvanising spray for metal components requiring a permanent anti-corrosion coating.
GALVA POWER
A zinc/aluminum content cold galvanising spray designed for the retouching of metal parts. Powerful spray specially designed for low temperatures (-10°C).
GALVA MAT EN POT
A very pure zinc coating for a long life protection.
GALVA MAT TRIPLE PROTECTION
New concept 3 in 1. The last word in cold galvanising subdues, replaces zinc coating (resists more than 3000 hours according to ASTM B-117 test).
GALVA BRILLANT TRIPLE PROTECTION
New concept 3 in 1. The last word in cold galvanising subdues. Aluminum brilliance.
GALVA SPRAY ECLAIR
Exceptional brilliance. Appearance of molten zinc that has been treated in a hot-dip galvanisation bath. Extra quick drying. Ideal for weld retouching and protection. Smooth, uniform, drip-dry film. Excellent covering power.
|
|
|
|
Chemical products, Solvents, Aerosols, ...
