|
|
| Brouwer Metaal is specialised in the professional production of special aluminium bronzes. These aluminium bronzes are equivalent to Ampco alloys and are used in forming, bending or deep drawing operations. They are used for forming rolls, bending and wiping blocks. We produce this alloy in all kinds of forms like rods, professional bars, plates and professional wheels. Also we can machine finsihed parts according the drawings of our customers. |
|
Aluminium Honeycomb possesses an excellent strength to weight ratio. It is applicable almost anywhere, where lightness and strength are required and its use is therefore virtually unlimited.
The Corex - Aluminium Honeycomb range can be supplied in a variety of conditions:
- Expanded or unexpanded.
- Full blocks or cut slices.
- Perforated or unperforated.
- Corrosion treated or untreated.
Some of the most widespread applications for Aluminium Honeycomb are as follows:
In the rail industry:
- Professional doors
- Floors
- Energy Absorbers/Bumpers
- Ceilings
- Industrial partitions
In the marine industry:
- Commercial vessels and naval vessel bulkheads
- Wall ceiling and partition professional panels
Other applications that are not transportation related:
- Washing room panels
- Exterior architectural professional curtain wall panels
- Air, water, fluid, and light directionalisation
- Heating, ventilation, professional air conditioning equipment and devices
- Skis and snowboards
- Energy absorption protective structures
- Electric shielding enclosures
- Acoustic attenuation |
|
PCGA-XR1 3003 commercial grade aluminum honeycomb is a lightweight core material offering excellent strength and corrosion resistance for industrial applications at low cost. PCGA-XR1 3003 honeycomb is made from 3003 aluminum alloy foil.
Features:
- Use temperatures up to 350°F
- High thermal conductivity
- Flame resistant
- Excellent moisture and corrosion resistance
- Fungi resistant
- Low weight/High Strength |
|
Aluminium Honeycomb panels are used to form lightweight, high strength sandwich units that are extremely rigid. The Aluminium Core is manufactured in several grades from 3003 general applications to 5052 and 5056 for use in Military applications.
Aluminium 3003 as a core material has the following attributes
Temperature usage up to 175 ° C
High Thermal Conductivity
Flame resistance
Moisture and Corrosion Resistance
Fungi Resistant
High Strength
Low weight
|
|
La GAMA
Diameters (mm)
20 < Ø <125
127 < Ø < 240
Grades offered
Ck 45/20 MnV6
20 MnV6 (-M *)
Lengths (mm)
4000-7800
5400-7600
Packaging
Each bar is protected by a laminated cardboard tube or green plastic sleeve
|
|
RANGE
External diameters (mm)
20 < Ø < 160
Grade offered
St 52-3
Lengths (mm)
5400-7600
Packaging
Each tube is protected by a laminated cardboard tube or a blue plastic sleeve
|
|
| Umicore Tool Materials is a business line of Umicore, serving the markets of professional diamond tools and hard metal applications. We offer a wide range of Cobalt powders, Nickel powders and pre-alloyed alternatives (from our Cobalite range). |
|
Buderus cold rolled strip is produced exclusively from Buderus hot rolled strip. This gives Buderus cold rolled strip all the quality and logistical advantages associated with Buderus hot rolled strip:
- Close ranges of chemical composition
- Low segregation
- A high level of homogeneity within a heat
- Low gas content
- Low micro-inclusion content
- Ideal precision blanking properties thanks to its favourable annealed structure
- Low conversion costs through high tool life
- Close tolerances
- Short, reliable delivery times based on in-house melting facility
The Buderus speciality ISO-B grade is available as cold rolled strip as a matter of course. |
|
In addition to a complete line of magnetrons and custom development services, Angstrom Sciences also offers a comprehensive selection of high-purity vacuum deposition materials.
These are available in either prefabricated sputtering targets or bulk-form evaporation materials - and we manufacture wire, rods, electron-beam evaporation cones, and hearth liners, as well.
Using a variety of specialized processes (including hot pressing, vacuum sintering, hot/cold isostatic pressing, and vacuum melting), we can provide the kind of homogenous, fine-grained, high-density materials that conform to the strictest quality control.
The result is technically superior materials for all your thin film applications
|
|
Since 1920, Buderus has been successfully serving global markets for special steel products. The quality features of Buderus hot- and cold-rolled strip are founded on application-specific metallurgy and product technology systematically applied to satisfy customer requirements
and market trends. Extensive new investment and process developments have enabled Buderus Edelstahl Band Gmbh to transfer
to its stainless special steel products the established quality of Buderus hot- and cold-rolled strip, with its excellent precision blanking
structure and low segregation ingot casting. |
|
The quality features of Buderus hot strip are founded on application-specific metallurgy and product technology systematically applied to satisfy customer requirements and market trends. The key factor here is judicious coordination of quality planning, smelting and rolling technology, and annealing processes in house.
We use ingots from our own steel mill. The symmetrical profile and uniform thickness tolerances throughout Buderus hot strip make it the ideal input stock for producing cold strip with precision tolerances.
Our steels satisfy the stringent requirements for punching and fine blanking, often in combination with critical forming processes.
Buderus special steels are characterized by:
- Close analytical limits
- Low level of segregation
- High level of homogeneity within a heat
- Low gas content
- Excellent annealing structure with maximum spheroidization
- Very good percentage purity |
|
RANGE
Diameters (mm)
18 < Ø < 100
Grades offered
Cf 53
2 C 55
42 CD 4-42 Cr Mo4
Lengths (mm)
5400-7600
Packaging
Each bar is protected by a laminated cardboard tube or a grey plastic sleeve
|
|
| All metal knitted mesh gaskets in various profiles - solid round, square, flat bandage etc. Materials available Monel, Aluminium, Stainless Steel and Tin plated copper clad steel. |
|
| Alco-Knit is a resilient compressible conductive EMI knitted wire mesh gasket. Standard wire alloys are knitted into rectangular, round, dual rounds and P shape supplied in a variety of cross sections with or without fin. Alco-Knit is used to shield joint unevenness on enclosure applications requiring metal to metal contact. Alco-Knit is attached to mounting surfaces with adhesives, riveting or spot welded. Alco-Knit is supplied in cut to length strips terminated to prevent fraying ends, formed mesh gaskets fabricated to customer drawings or spooled. |
|
Knitted Mesh Soft gaskets are designed specifically for
industrial shielding applications where a low compression resistance
gasket is required. One layer of fine Monel wire mesh knitted
over a low density urethane foam gives an excellent
combination of Rfi shielding performance and mechanical
characteristics. Pressure sensitive professional adhesive is available upon
request |
|
More than 1000 references from 10 microns to 125 mm opening.
These meshes find applications in separation techniques, protection, armature and materials handling.
GANTOIS converts all these wire meshes for offering you finished or semi-finished products designed according to the characteristics and specifications defined by you.
|
|
GANTOIS manufactures and markets welded screens used in various industries:
Agriculture
Engineering
Automobile
Aeronautics…
The applications are varied:
Protection
Ventilation
Aeration
Drying
Treatment…
The WELDED SCREENS are sold in rolls of finished or semi-finished products for meeting your needs according to your requirements and specifications. |
|
We produce Moly powder and alloying "fingers" for the specialty steel industry. This is an exciting new business for us, which we hope to build in the future
Molybdenum alloy: ½" to 2" (steel additions)
|
|
We produce Moly powder and alloying "fingers" for the specialty steel industry. This is an exciting new business for us, which we hope to build in the future.
Molybdenum Powder: 1.0µ - 6.0µ
|
|
|
|
Metals, Semi-finished products
