|
|
Plastic protective netting in polyethylene. Ideal for protection during shipping & handling and extra packaging.
Avalaible for parts from 1/4" (6.4mm) up to 12" (304.8mm).
|
|
|
Alliance Plastic’s has a full offering of industrial protective netting now fully stocked at all of our Alliance locations in the U.S. and Canada. Our FNC and FNH series can be used to protect virtually any form of product from damage during storage or shipping. Due to the exceptional design each part is capable of protecting a range of sizes which will cut down on a lot of excess inventory. Each size is varied by color so you could visually identify your specific parts by the color of the netting. The FNC has 7 colors for 9 sizes ranging from ¼” to 12” diameter and the FNH has 4 colors for 9 sizes ranging from ½” to 8” diameter. Colors include red, orange, blue, yellow, red, green, brown, and natural. For those applications where more durability is needed, we’ve got you covered with our FNH series which is a heavier gauge material. So if rework costs and customer returns are getting out of control it’s time to contact Alliance Plastics for samples of our protective netting
|
|
Tildmesh is an economical and effective method of
safe guarding crops against pests without the use
of harmful insecticides.
Crops must be covered immediately after sowing.
Transplants must be free of pests before covering.
This is best achieved by raising the transplants
under Tildmesh. Some soil pests such as Carrot Fly
can survive in the soil between crops. Covered
carrots should therefore only be grown in rotation
with non-umbelliferous crops.
|
|
|
Tapes are manufactured to the highest standard using high temperature silicone or acrylic adhesives. Combining premium backing materials with high performance adhesives, we manufacture some of the most specialized tapes available. Many of our own PTFE coated fiberglass fabrics are made bondable on one side and are converted into adhesive tapes. A number of our tapes enter service in diverse industries including: Packaging, Food Processing, Aerospace, Electrical / Electronics, Molding etc.
|
|
By combining the properties of PTFE and glass cloth, elongation at break, pressure resistance and flexibility could be improved significantly.
The production of PTFE composite compounds enables decisive improvements in terms of PTFE and carrier compound properties. The possibility of combining and mixing PTFE with different materials leads to new approaches in resolving material issues. For example, PTFE can be firmly bonded with metals, glass cloth and similar materials.
Highlights
outstanding chemical resistance
suitable for high temperature ranges between –200°C to 260°C
very good anti-adhesive behavior
good electric properties
good mechanical properties
Typical Applications
protective covers,
corrosion protection
bearing contact surfaces (protection against abrasion and friction)
electrical insulation
linings for engines and generators
weather protection (radomes) for transmitting stations
|
|
Highlights
Increase of E-module and tear resistance
Reduction of cold flow
Low thermal expansion coefficient
Low permeation
Improved adhesion
PTFE-sheets combined with fabrics, fibers, metal foils, glass and elastomer films
Typical Applications
Linings for chemical industry requirements
High-strength compounds (XYMON)
Guides and bearings
Composite membranes
Base materials for printed circuit boards
Conveyor belts
Customer-specific composites
|
|
PTFE
Virgin and filled Ptfe rods, sheets,
moulded tubes, tapes, even in special
materials for high prestations (Diflon D).
Available in stock finished products.
|
|
Extensive research into colour pigmentation has led to the development of a brighter white colour formulation throughout the Foamalux range which optimises reproduction capabilities to achieve outstanding print clarity and quality.
The finely balanced blend of pigments in Foamalux White provides a perfectly clean, crisp printing surface resulting in a noticeably brighter and truer print finish, achieving optimum print clarity of the highest quality for:
* Signs
* Point of purchase displays
* Exhibition backdrops
Brett Martin developed Foamalux White to provide the maximum levels of UV stability in the ink curing process to produce outstanding image quality and the highest standards of digital reproduction for demanding six and seven colour imaging requirements.
|
|
TMI, LLC (Trading & Manufacturing Industries) headquartered in Pittsburgh, Pennsylvania has quickly become the leader in the Flexible Clear PVC Film industry. We have over 2 million pounds of material in stock that are available to ship the same day. To maintain quality, all PVC is rolled onto 3'' diameter cores, wrapped in craft paper and individually boxed.
Our research and development department has worked hard to develop a well-diversified line of the finest clear, flexible film products on the market. All our super double polished items are exceptionally clear! Special sizes, roll lengths, compounds, colors, or any other “custom runs” are possible. Call for complete details. Blanket orders are welcomed.
Save-T PVC Film can be radio frequency heat sealed or sewn. TMI also offers a complete line of conversion services. See our website at www.tmi-pvc.com/pvc_film/conversion.html for complete details.
|
|
- Sheeting: rubber and PVC, supple or rigid
- Insulation sheets: foam for furniture
We offer all qualities of rubber sheeting for :
joints - fittings - flaps- strips - coating - shock absorbers - funnels - anti-abrasion coating - anti-corrosion coating.
For use by the food, chemical and pharmaceutical industries.
|
|
TMI, LLC (Trading & Manufacturing Industries) headquartered in Pittsburgh, Pennsylvania has the largest stock of different sizes and thicknesses in the United States. Materials vary from .004" thick up to .500" thick and from 4" wide up to 86" wide. Whatever you need, if it’s clear, colored, or tinted flexible PVC, TMI can supply it!
All of our PVC material is produced to stringent specifications, with clarity and quality being of highest importance. Our materials are rolled on cores and individually boxed to protect the PVC while in storage or shipping.
Through customer demands we have developed lines of Strip Doors, Air Doors, Soft Wall Enclosures, Industrial Curtains, and Screens that offer the most economical solutions to environmental separation problems such as cold, heat, humidity, dust, and noise. We also have a complete line of Dock Accessories and PVC to make TMI your only source for energy control products.
|
|
Coated Fabric :
Offer a wide array of polymer Coated fabrics like polyester, nylon, etc. in single and double texture for a wide range of applications like resistance to extreme temperatures, high pressure, acids, alkalis, oils, etc. in variable thickness. Advance manufactures buoyancy, canopy fabric for life raft. Basic fabrics such as Cotton, Nylon & Polyester for variety of applications in the fields of Insulation, Defense, aviation, marine, offshore and Oil Coated Fabrics.
Neoprene Coated Nylon Fabric
Hypalon Coated Nylon Fabric
Nitrile Coated Nylon Fabric
Polyurethane Coated Nylon Fabric
Neoprene Coated Polyester Fabric
Hypalon Coated Polyester Fabric
Butyl Coated Nylon Fabric
|
|
Rubber profiles: compact or cellular for industry and construction use, sold in stock or by order
Security profiles
|
|
Finding exactly the right rubber compound for a particular application is never easy but GHE are always pleased to offer advice on Shore hardness, tensile strength, recoil elasticity, abrasion resistance, resistance to common agents such as petrol, oil, solvents, climate influences and ozone. The compounds processed by GHE include NR, SBR, NBR, CR and EPDM.
Typical products which can be supplied in coils, rings or mitred frames are:
Buffer sections
Clamping sections
Door seals
Edge sealing profiles
Filler profiles
Flexible tubes
Flocked rubber weather-strips
Hinges
Manhole cover seals
Welts of all kinds
|
|
Ruber Technology
For over 60 years, ERIKS stands for innovation and quality in rubber technology. This experience and the years of cooperation with the main raw material producers are the ideal basis for a partnership with ERIKS.
ERIKS’ engineers and specialists go through the complete development process together with you and select the correct product for each application, at a competative price.
Sales program:
* extrusion
o cord
o profiles
o inflatable seals
* moldings
o customized moldings
o bellows
o washers
o traditional production
* cellular and sponge rubber
* vibration damping
* high purity seals and gaskets
|
|
M.E.C. GUM ®
Rubber sheets and mats are particularly suitable, in terms of composition, behaviour, cost, hardness, elasticity and finishing, for systems put to a more frequent use.
When choosing the quality you require, you should consider above all the presence of:
1. natural agents (light, ozone, etc.)
2. chemical agents (oils, fats, fuel, acids, solvents, etc.)
3. physical agents (high/low temperature)
4. mechanical agents (abrasive actions, repetitive stresses, heavy loads).
Choosing the wrong quality product could result in a rapid deterioration in its performance.
|
|
- Sheeting: rubber and PVC, supple or rigid
- Insulation sheets: foam for furniture
We offer all qualities of rubber sheeting for :
joints - fittings - flaps- strips - coating - shock absorbers - funnels - anti-abrasion coating - anti-corrosion coating.
For use by the food, chemical and pharmaceutical industries.
|
|
NR or Natural Rubber Polyisoprene is derived from latex liquid extracted from rubber trees. Originally cultivated in the Amazon region, it is now cultivated extensively in South East Asia, Africa and India. This rubber has excellent mechanical properties, low compression set and high resilience. It also has excellent dynamic and rebound properties. The operating temperature range is from -50° C to + 90° C. It is available in a wide range of harnesses from 30° to 90° shore A. It has good resistance to acids, alkalis and salts. It is not recommended for use in areas where it could come in contact with oils and hydrocarbons.
Application wise they are used as skirt board sheets, bridge bearing pads, shot blasting sheets, high tensile tangum sheets, commercial sheets with cotton insertion etc.
|
|
Special sheet is manufactured with 1 ply and 2 ply Nylon Farbric Insertion used as Diaphragms for Oil, LPG and solvent resistant applications.
Diaphragm sheet is manufactured with high quality Nitrile Rubber Compound designed for long service. This rubber sheet is reinforced with 1 ply or 2ply Nylon fabric to provide strength. Recommended use for control valves, regulators, pumps etc. They can also be used as weather strip material.
|
|
|
|
|
|
Water intended for human consumption without imparting any toxic effect is drinking water. Water of sufficient quality to serve as drinking water is termed as potable water whether it is used as such or not. The non-metallic materials can cause changes in water quality when it comes in contact with it.
BS 6920 and its modified version AS/NZS 4020:2002 (for Australian and New Zealand requirements) is the method for testing the water quality –i.e, ‘Testing of products for use in contact with drinking water’ and any non-metallic product should comply with these test requirements for getting the approval given by Water Quality Centre (WQC).
Zenith PWS has been developed for using in contact with drinking water which has been met all the technical and biological property requirements as tested by following the corresponding Standards.
Zenith PWS is a high performance and low specific gravity (1.13) EPDM rubber compound which can be applied for water fitting (supplying) parts e.g., lining, joining, gaskets, membranes, cisterns, O-rings, washers that are used in contact with drinking water.
For more details please visit our website www.zenithrubber.com
|
|
Rubber truck bed liners
Features / Benefits
- Prevents damage to the outer of the truck from the sharps rocks, increasing the life of the equipment.
- Increases the durability of capital equipment employed.
|
|
S-2 Glass products are made exclusively by AGY and are supplied to a wide variety of markets and end use applications around the world. S-2 Glass fiber has been selected and qualified over other fiber materials for demanding applications such as helicopter blades, aircraft flooring and interiors, vehicle and vessel armor protection, fireman and scuba bottles, and high strength timing belts.
S-2 Glass fiber is certifiable and meets military specifications MIL-R-60346, Type IV for rovings and MIL-Y-1140H for yarns
|
|
|
Caplugs offers edge liners that not only provide superior protection from bumps and nicks, but also cover sharp edges and openings in sheet metal. Our edge liners are manufactured from plastic (low or high-density polyethylene), FlexTemp (for high heat resistance), or conductive materials. Grommets are available to protect electrical insulation, hoses, and cables installed through holes punched in metal.
|
|
Momentive Performance Materials Silicones for multitude of applications
Momentive Performance Materials is one of the world’s most innovative silicone producers.
As distributor, we sell numerous GE-products, which ideally complete our adhesives:
Silicone rubber
Sealants and adhesives
Emulsions
Coatings
Potting
Fluid silicones and gels
Momentive Performance Materials Silicones application areas:
Electronic
Around the PCB
Glass bonding
|
|
Taconic silicone coated fabrics exhibit very similar properties to fluorocarbon resin and PTFE coated fabrics.
Excellent Release properties up to 230°C
Silicone coated surfaces exhibit excellent release characteristics and will release adhesive and viscous materials which often adhere to a fluorocarbon resin.
Good Chemical Resistance
Silicone coated fabrics exhibit high resistance to attack from mild alkali, non-oxidising acids, most salts, mineral lubricating oil, air, moisture and sunlight.
Superior Abrasion Resistance and Flex
Silicone coated fabrics offer a tough coated surface with high abrasion and flex resistance. Silicone coated fabrics, however do not exhibit the low friction surfaces or self lubricating properties of fluorocarbon resins.
Super Dielectric Properties
Silicone coated fabrics are excellent electrical insulators in tough environments.
|
|
|
|
|
|
Silicone rubber is physiologically inert, thus making it the preferred choice of medical, pharmaceutical and food processing industries. Silicone have comparatively low mechanical properties, tensile strength, elongating and tear strength, however they keep constant even at high temperatures but should not be used with high pressure steam. Its resistance to oil and hydrocarbon products is fairly limited and similar to that of Chloroprene rubbers. Reasonable resistance to to a whole range of general chemical products, but acids, alkalis, esters and kerosene should be avoided. Silicone has excellent resistance to heat (dry air), at +200°C intermittent. It remain flexible at low temperatures of -70°C and it is also resistant to ultra-violet light, Ozone and weathering. Exhibits low inflammability and low smoke toxicity. It has good electrical insulation properties.
Zenith manufactures numerous types of silicone compounds for various applications.
Please visit our website for more details on various products of silicone sheets.
|
|
Many of you reading this know of this problem from your own experience: A lot of routine sealing jobs simply cannot be carried out effectively using solid rubber profiles. This is where GHE's selection of sponge and cellular rubber profiles comes to the fore because these extrusions are both extremely soft and elastic, thus providing a secure and durable seal even under extreme conditions and heavy loading.
Their applications in industry are manifold:
Door, bonnet, boot and luggage compartment flap seals in the automotive industry
Tight and durable seals for the housings of street lights, no matter what the weather
Heavy steel doors and windows
Audio and calibration equipment
Seals in the aviation and electrical industries
GHE's extruded and moulded compounds (NR, NBR, CR and EPDM) can be supplied in coils, fixed lengths, rings and mitred frames. Moulded sponge rubber qualities with a reinforced outer skin are also available.
|
|
More than 1000 references from 10 microns to 125 mm opening.
These meshes find applications in separation techniques, protection, armature and materials handling.
GANTOIS converts all these wire meshes for offering you finished or semi-finished products designed according to the characteristics and specifications defined by you.
|
|
The high resistance to compression and the excellent damp-resistance properties of STYRISOL® makes it ideally suited as insulation under different flooring types.
Installation UNDER the concrete
STYRISOL® insulation boards are placed directly on the flat and stabilised foundation. A PE-foil needs to be put above the insulation to prevent the mortar from getting between the joints of the boards (creates cold bridges).
Installation ABOVE the concrete
STYRISOL® insulation boards are placed on a smooth concrete surface. We suggest that a water vapour barrier is placed between the boards and the concrete to avoid cold bridges.
Attachment TO the concrete
It is recommended that the insulation is fixed mechanically to the concrete. Underfloor heating STYRISOL® insulation boards can be used in all standard underfloor heating systems.
|
|
Very soft, stress-less thermal conductive pad
1. From an expert in softness and silicone
Alpha gel's softness and conformity help minimize heat resistance and stress on critical devices in electronics.
Try; you will be amazed to find that catalog only scratches the surface when Alpha gel thermal conductive sheets are actually compared side by side in tests.
2. Alpha gel brand:
Alpha gel is the umbrella brand for the patented, multifunctional silicone gel from Taica Corp. For over 20 years, ‘s softness has established unique and distinct position in vibration isolation, shock absorption, thermal conductivity, and a comfortable feel in ways traditional solutions have fallen short.
|
|
|
|
Synthetic materials, Semi-finished products
