|
|
| Products 91 to 120 of 153 |
Special sheet is manufactured with 1 ply and 2 ply Nylon Farbric Insertion used as Diaphragms for Oil, LPG and solvent resistant applications.
Diaphragm sheet is manufactured with high quality Nitrile Rubber Compound designed for long service. This rubber sheet is reinforced with 1 ply or 2ply Nylon fabric to provide strength. Recommended use for control valves, regulators, pumps etc. They can also be used as weather strip material.
|
|
Water intended for human consumption without imparting any toxic effect is drinking water. Water of sufficient quality to serve as drinking water is termed as potable water whether it is used as such or not. The non-metallic materials can cause changes in water quality when it comes in contact with it.
BS 6920 and its modified version AS/NZS 4020:2002 (for Australian and New Zealand requirements) is the method for testing the water quality –i.e, ‘Testing of products for use in contact with drinking water’ and any non-metallic product should comply with these test requirements for getting the approval given by Water Quality Centre (WQC).
Zenith PWS has been developed for using in contact with drinking water which has been met all the technical and biological property requirements as tested by following the corresponding Standards.
Zenith PWS is a high performance and low specific gravity (1.13) EPDM rubber compound which can be applied for water fitting (supplying) parts e.g., lining, joining, gaskets, membranes, cisterns, O-rings, washers that are used in contact with drinking water.
For more details please visit our website www.zenithrubber.com
|
|
AGY produces S-2 Glass® Yarns, which are continuous fibers twisted together to provide strand integrity and processing advantages for textile processes such as weaving, braiding, plying, and cabling. S-2 Glass Yarns are available in a number of constructions and size systems tailored to meet the needs of the end user. There are two main families of S-2 Glass Yarns - starch oil sized yarns and direct sized yarns.
S-2 Glass® Yarns - Starch Oil Size
AGY produces D450, G150, and G75 yarns with a starch/oil size system optimized for weaving processes where fabrics will be heat cleaned and finished with fabric finishes. These yarns consist of numerous filaments twisted together to form single yarns. The size chemistry protects the glass filaments from abrasion during processing and is typically removed after processing. Fabrics are treated with resin-compatible finishes.
S-2 Glass® Yarns - Direct Size
AGY produces G150 and G75 yarns with direct size systems that are optimized for resin-compatibility without fabric heat cleaning and finishing requirements. These yarns are developed for typical yarn processes such as weaving, and are developed with direct size systems to provide added value to the composite manufacturers. |
|
Momentive Performance Materials Silicones for multitude of applications
Momentive Performance Materials is one of the world’s most innovative silicone producers.
As distributor, we sell numerous GE-products, which ideally complete our adhesives:
Silicone rubber
Sealants and adhesives
Emulsions
Coatings
Potting
Fluid silicones and gels
Momentive Performance Materials Silicones application areas:
Electronic
Around the PCB
Glass bonding
|
|
Silicone rubber is physiologically inert, thus making it the preferred choice of medical, pharmaceutical and food processing industries. Silicone have comparatively low mechanical properties, tensile strength, elongating and tear strength, however they keep constant even at high temperatures but should not be used with high pressure steam. Its resistance to oil and hydrocarbon products is fairly limited and similar to that of Chloroprene rubbers. Reasonable resistance to to a whole range of general chemical products, but acids, alkalis, esters and kerosene should be avoided. Silicone has excellent resistance to heat (dry air), at +200°C intermittent. It remain flexible at low temperatures of -70°C and it is also resistant to ultra-violet light, Ozone and weathering. Exhibits low inflammability and low smoke toxicity. It has good electrical insulation properties.
Zenith manufactures numerous types of silicone compounds for various applications.
Please visit our website for more details on various products of silicone sheets. |
|
More than 1000 references from 10 microns to 125 mm opening.
These meshes find applications in separation techniques, protection, armature and materials handling.
GANTOIS converts all these wire meshes for offering you finished or semi-finished products designed according to the characteristics and specifications defined by you.
|
|
| Bergquist's Thermal Products Group is a world leading developer and manufacturer of thermal management materials which provide product solutions to control and manage heat in electronic assemblies and printed circuit boards. Sil-Pad products are used by many of the world's largest OEMs in various industries including automotive, computer, power supply, military and motor control. |
|
The main problem to be tackled when electronic devices are to be used is the proper dissipation of heat, from the joint to the external environment.
The thermal organization can be divided as follows:
- Thermal processes inside the device;
- Heat transfer from the electronic device to the heat sink;
- Heat diffusion from the heat sink to the outside
In order to optimize the first two phases, it is very important to fully understand the heat diffusion modes as well as to know the material characteristics in detail. |
|
The thermal resistance of component characterizes the temperature’s increase caused by the electronic power. To decrease this resistance, GETELEC has developed a new range of thermoconductor gel which enable to avoid deterioration of your equipments. GTG offers good thermal conductivity (1 to 7 W/m.k) and a high softness (10 to 65 Shore 00). This material conforms to surface irregularities under low application pressures to fill air gaps between components and the heat source.
Comply with actual specifications and european directive ROHS, this material is available from 0,5mm to 5mm with one or two adhesive sides.
|
|
Instead of using thermosetting resins as in traditional pultrusion, this process employs a thermoplastic matrix.
In addition to their very high strength and stiffness, thermoplastic pultruded profiles produced via in-line co-extrusion also offer the advantages of greater impact and abrasion resistance, thermoforming, dual component extrusion, and the bright color finishes typical of thermoplastic profiles. |
|
| Fluoro Elastomer rubber or Viton is based on hexafluoropropylene vinylidene fluoride. The polymer has high resistance to heat with a temperature range of -40° C to + 250° C. It has also possesses a good flame resistance and are usually self extinguishing. FKM’s have excellent resistance to oxygen, ozone and natural weathering and also have outstanding resistance to compression, especially at elevated temperatures. Its resistance to most solvents and chemicals give long service life as it has excellent resistance against huydrocarbons, aliphatics, aromatic and chlorinated chemicals and resistance to acids and alkalis including oxidants. However, they have poor performance against ethers, ketones and bases. |
|
| ... products without technical information |
| |
|
|
Synthetic materials, Semi-finished products
