|
|
This brake is equipped with an electrical professional fan for a thermal capacity up to 4,4 kw. It's mainly suitable to winding and unwinding applications with maximum speed 2.670 rpm.
The stardard protection guard is designed according to international safety regulations. The modular and ergonomic design allows easy re-configuration and maintenance of the braking units.
An agile and reliable brake with the best price/quality ratio.
Braking torque from 1,9 to 1.760Nm. |
|
Low inertia pneumatic brakes and clutches, also available as spring-applied emergency brakes.
Air tube concept offers sensitivity and versatility to a huge number of high-frequency industrial processes.
The multidisc system gives very high torque in a compact size.
Max. torque from 210 to 49 500 Nm. |
|
| These work the same as our constant tension stand. They are designed to give constant torque at the surface diameter. As the diameter decreases, the tension remains constant. |
|
The Ausco's ball ramp professional brake as a high-efficiency, low-cost solution to mechanical braking.
Ball ramp brakes are typically designed into axles, transmissions, etc. As a result, Ausco custom designs these products to meet customer-specific needs and produces them for everything from farm industrial tractors and spray coupes to tipping systems and backhoe loaders.
|
|
| Spring applied safety brakes offer high operational security for all applications, protecting personnel, machines and equipment, reliably braking for positioning or holding duties or for sudden machine stops for emergency OFF or power failure. We have developed as the technology leader in the field of safety brakes by developing optimised solutions for a wide product range. |
|
Manufacturer of ball screw Brakes
Caliper Brakes
Drum Brakes
Flange Or Foot Mounted Air Engaged Brakes
Flange Or Foot Mounted Spring Engaged Brakes
Metric Shaft Mounted Brakes
Servo Motor Brake (Air Engaged)
Servo Motor Brake (Spring Engaged Electric Release)
Servo Motor Brake (Spring Engaged)
Shaft Mounted Air Engaged Brakes
Shaft Mounted Spring Engaged Brakes
Stage Brakes |
|
| Ogura is the largest manufacturer of electromagnetic clutches and brakes in the world. Current manufacturing capacity is in excess of 30 million clutches and brakes per year. We have 14 manufacturing plants throughout Europe, the Americas, and Asia. All plants are certified ISO9001 and most have been certified ISO 14001 and TS16949. We have over 3,000 designs available. Besides the standard product shown we also make a variety of specialty products. Our products are used in automotive, industrial, mobile, factory automation, office automation, agricultural and professional construction machinery industries. Our brakes are made in the following styles: electromagnetic single face, multiple disk, hysteresis, eddy current, magnetic particle and permanent magnet. Torque range for standard products is from .0001nm to 1,000nm. |
|
Ortlinghaus offers a broad spectrum at brakes for your application as catalog execution: spring-tensioned brakes with hydraulic, pneumatic, electromagnetic or mechanical ventilation for wet or unlubricated operation.
With some your applications these due to certain constructional basic conditions will not be suitable. In this case we offer to you to develop one exactly on your application cut solution together with you. Profit from our experience!
|
|
Permanent Magnet Industrial brakes
Most commonly used on escalators, these brakes use both permanent magnets and magnetic coils to produce torque and control operation.
Electric brakes
Designed for maximum flexibility and long, dependable service, our electric brake is electromagnetically released when voltage is applied and spring-engaged when current is interrupted.
Hilliard Twiflex Series/Shunt Brakes
The Hilliard Corporation and Twiflex Ltd. have applied over 70 years of combined experience to develop the Series/Shunt Caliper Disc Brakes. Designed as a direct replacement for drum brakes, these brakes require no modifications to existing AISE mountings. The design is based on the Twiflex MR-type brake, which has been used successfully for over 40 years in harsh industrial environments worldwide.
SE Caliper Brakes
The SE spring applied and electrically released calipers are designed for medium to heavy stopping and holding applications.
MK Electrically Released Calipers
Powerful floating caliper design can be used on conventional disc or rail applications.
Twiflex Disc Brakes
• Spring Applied
• Pneumatically Released
• Hydraulically Released
• Electrically Released
• Direct Applied
• Pneumatic
• Hydraulic
• Mechanical
|
|
Ausco is the leader in brakes for professional construction equipment.
Ausco designed a professional brake that acts as both the parking brake and the mid-mount bearing supplier. The result was a high-value product that eliminated Deere's reliability concerns with caliper brakes and reduced overall cost.
Ausco also leads the market with innovative products on dozers, mini-dumpers, backhoe loaders, telehandlers, trenchers, pavers, graders, etc. In fact, it is hard to drive by a construction site without spotting at least one piece of equipment that features Ausco brakes. |
|
Profile Rail Brake
Nexen's RB Series of linear profile guide rail brakes uses spring force to secure the load in holding applications. Superior response time and high force for stopping and holding in e-stop and power-off situations. Each RB brake clamps supplier directly onto the center of the guide rail to provide positive braking and holding in all axes. These profile rail brakes hold position accurately by eliminating drive train backlash and elasticity.
Nexen's RB Series is engineered for dependable performance. With a revolutionary set of patent pending features, the RB Series provides an industry leading braking solution for linear profile guide rails. If personnel safety is required, an unrelated, redundant safety system is recommended.
Fits 15, 20, 25, 35, and 45 mm Profile Guide Rails |
|
| Industrial friction pads and linings manufactured in organic moulded material. Available in either metallic & non metallic material with high friction coefficient for stopping or low friction coefficient for slipping applications. |
|
The most popular range of MEROBEL's EMP Brakes, offering tailored solutions for every needs from its 10 sizes and up to 5 different version (acceptable power dissipation level) for each size.
- EMP technology (ElectroMagnetic Particle)
- Torque proportional to the electric current, independent of the slipping speed
- The best design for Tension Control and Test tables applications
- 5 different versions (power dissipation) available
|
|
The Positorq® brakes use multiple disc oil shear technology with a continual supply of cooling and lubricating fluid like all other Force Control units. The main difference is that the Positorq® Brake is a constant slip device. It is normally force lubricated for smooth accurate torque control over the entire speed range, even to 0 RPM. Tension torque is transmitted through the viscous shear of the fluid between the friction surfaces.
Torque is proportional to air or hydraulic pressure supplied to the piston. Teflon piston liners produce smooth controllable piston movement for precise control and quick brake response.
Web tension control and dynamometer (dyno) brakes are essentially energy absorbers. Rotary motion is transformed through the brake to heat, so a critical function of the brake is its ability to dissipate heat. In the Positorq® brake, fluid is pumped through the brake shaft to furnish a continuous supply of fluid between the friction surfaces. The fluid lubricates the surfaces at the point of engagement, and removes engagement heat. The fluid is then circulated through a chillers unit and cooled fluid is returned to the Positorq® brake. |
|
Air Actuated Spring Released
Air Engaged Spring Released Caliper Brakes
Spring Actuated Air Released
Spring Engaged Air Released Caliper Brakes
Spring Actuated Hydraulic Released
Spring Engaged Hydraulic Released Caliper Brakes
|
|
Fail to Industrial safe (spring applied)
HYDRAULICALLY RELEASED
PNEUMATICALLY RELEASED
ELECTRICALLY RELEASED
Direct Acting (spring released)
HYDRAULICALLY APPLIED
PNEUMATICALLY APPLIED
MECHANICALLY APPLIED
|
|
| Ausco has done a great deal of development in hydraulic calipers over the last several years. We have developed new calipers for everything from industrial sprayers and airport tow industrial tractors to utility vehicles, with many more new designs on the way. Ausco continues to innovate in this area with features such as self-retracting professional seals, which ensure caliper piston retraction and long lining life, and modular calipers, which allow the caliper to be used with either a fixed or a floating mount. |
|
Centrifugal industrial clutches: Reliable drive elements used as starting mechanism in combustion engines and electric motors for many applications. Special designs can be produced to order.
Centrifugal brakes: Mechanically solid security devices, work without any separate energy source, automatic operation. Braking torques up to 2000 Nm. Special designs can be produced to order.
|
|
The Hilliard Extreme Duty Centrifugal Professional clutch has been engineered to provide long service life and is ideal for retrofit or new equipment applications. A thermodynamically designed clutch industrial shoe increase the clutch’s capacity to absorb heat without damaging the integrity of the clutch.
• Bi-directional operation
• Overload protection
• Load-free starting
• Optional engaging speeds available
|
|
| Posidyne® clutch/brakes transmit torque by shearing automatic transmission fluid between multiple friction discs. The fluid absorbs the heat of engagement and dissipates it through the housing. The recirculating fluid minimizes wear, resulting in exceptionally long service life. Oil-shear operation provides a controllable, cushioned engagement that is smoother, quieter and more accurate than dry friction units. |
|
Driven Shaft Mounted
Air Champ 1 Professional clutch Brakes
Driven Shaft Mounted, Straight Bore, Double Piston, Air Engaged, Clutch Brakes
Air Champ 2 Clutch Brakes
Driven Shaft Mounted, Straight Bore, Single Piston, Air Engaged, Clutch Brakes
LSCB Clutch Brakes
Driven Shaft Mounted, Straight Bore, Multi-plate, Air Engaged Clutch, Spring Engaged Brakes
Metric IEC Flange Mounted
FMCB Clutch Brakes
Open, Air Engaged Industrial clutch brake With Optional Input Shaft And Feet
FMCBE Clutch Brakes
Enclosed, Air Engaged, Clutch Brake With Optional Input Shaft And Feet
FMCBES Clutch Brakes
Enclosed, Air Engaged Clutch, Spring Engaged Brake With Optional Input Shaft And Feet
NEMA Flange Mounted
DAP Clutch Brakes
Open, Air Engaged Clutch, Spring Engaged Brake With Optional Input Shaft And Feet
FMCB Clutch Brakes
Open, Air Engaged, Clutch Brakes With Optional Input Shaft And Feet
FMCBE Clutch Brakes
Enclosed, Air Engaged, Clutch Brakes With Optional Input Shaft And Feet
FMCBES Clutch Brakes
Enclosed, Air Engaged Clutch, Spring Engaged Brake With Optional Input Shaft And Feet
Modular Clutch Brakes
Enclosed, Air Engaged, Clutch Brake With Optional Input Shaft And Feet |
|
Ortlinghaus offers a broad spectrum at industrial clutch brake combinations in catalog execution for your application: Professional clutch brake combinations with hydraulic, pneumatic, electromagnetic or mechanical manipulation for wet or unlubricated operation.
With some your applications these due to certain constructional basic conditions will not be suitable. In this case we offer to you to develop one exactly on your application cut solution together with you. Profit from our experience!
|
|
Available Clutches
Industrial Overrunning clutches
• Magna Torque (MT) Overrunning Professional clutch
• Bi-Directional Overrunning Clutch
• Overrunning Clutch
• MTR Industrial roller Ramp for Clutch Couplings, Dual-Drive & Turning Gear
• Enclosed Overrunning Clutch
Intermittent Motion Clutches
• Single Revolution Clutch
• Intermittent Drive Assembly
• Intermittent Drive Packages
• Hilliard-Twiflex Centrifugal Clutch
• Linkless Centrifugal Clutch
Torque Limiting Clutches
• Slip Clutch Friction Torque limiter
• Jaw Type Overload Release Clutch
• Ball Detent Overload Release Clutch
Drive Train Clutches and Outdoor Power Equipment
• Bi-Directional Overrunning Clutch for Turf and Lawn
• Hand Disconnect Clutch
• Drive System for Walk-behind Equipment
• Clutches for Turf and Lawn
Available Industrial brakes
• Permanent magnet Brakes
• Electronic brakes
• Hilliard Twiflex Series/Shunt Brakes
• SE Caliper Brakes
• MK Electrically Released Calipers
• Twiflex Disc Brakes
|
|
The Model HC or HCD clutches are designed to be used in either an end of shaft or through shaft mounting configuration. Their compact size makes these units ideal for incorporating within a gear housing. Multiple speed transmissions use a variety of these units to effect fixed mesh speed changes, or they may be used as a stand alone device for disconnect service.
|
|
The Posidyne® clutch/brake is designed for start/stop applications. Oil shear technology combined with advanced friction materials deliver smooth, accurate engagements., excellent positioning accuracy and repeatability, and superior thermal capability. A multiple friction disc design provides high torque capacity in a low inertia package. The Posidyne® clutch/brake also delivers long service life with low maintenance for applications where downtime is critical. Totally enclosed rugged housings provide protection against hostile environments.
|
|
|
|
Brakes
