|
|
| Products 151 to 180 of 234 |
R Series Rack and Pinion Style Rotary Actuator
The R Series is a heavy-duty rack and pinion style rotary actuator that is designed to excel in the most rigid applications. The R Series includes a high torque-to-size ratio as well as accurate positioning.
RW Series Rotary Actuator
The RW Series Rotary Actuator design utilizes two independent piston cylinders, each piston has a crank arm attached to a crankshaft. As the piston strokes in its bore, the crankshaft rotates, pressurizing the opposite bore reverses rotation. This unique design has many features and benefits over conventional rotary actuators.
LR Series Low Profile Rotary Actuator
The LR Series rotary actuator is a low profile rack and pinion design. Two independent pistons drive their corresponding racks against the pinion thereby rotating the platform.
|
|
PRO-PRN ROTARY ACTUATORS
Full range of 9 sizes available
Non-lube intermittent use
Single or double vanes types
PRN High torque versions
Suitable for Process, packaging and electronics industry's applications
RA SERIES ROTARY ACTUATOR
Rack and Pinion type - RA
90° or 180° Rotation
Shaft with key
Uniform high torque in both directions
P1V-P, RADIAL PISTON AIR MOTORS
P1V-P piston motor
Power 0,73 kW, 0,125kW and 0,228kW
Low speed and high torque
Available as base and brake motors
Very low noise level
Free speed from 2200 down to 7,4 rpm
High torque from 0,637Nm up to 500Nm
No wear parts necessary if supplied with oil mist
P1V-A LARGE AIR MOTORS
Designed for arduous applications
Non-lube intermittent use
External seal viton
Wide product range
Suitable for Food Industry applications
|
|
|
SMC manufactures two of the most common types of rotary actuators: Rack and Pinion and Vane style. In addition, we offer Combination models combining compact cylinders with rotation and rotary gripper combinations. When the application calls for rotational motion less than one revolution, rotary actuators can mount right at the equipment joint without taking up space with long stroke lengths, which would be required to do the same job with a linear cylinder. SMC's rotary actuators can achieve arc lengths of 90, 180, 190, or even 270 degrees, depending on the configuration.
|
|
RCM, RAN, RAP and RWT. Swing angles:
90,100,180,190,270,275,360° and indexable.
Precise positioning. Many possibilities of fixings. Assembly simple and fast of the parts to be added specific to the customers.
|
|
1. Rotary options available are the same as A01
2. Stop tubes are available to stabilize the extended shaft Standard lengths ate V and r, add 10 unit height Sleeves tor switch magnets serve the same function.
3. Needle VelVK see page 15.
|
|
RCM, RAN, RAP and RWT. Swing angles:
90,100,180,190,270,275,360° and indexable.
Precise positioning. Many possibilities of fixings. Assembly simple and fast of the parts to be added specific to the customers.
|
|
Efficiency is all about high-cycle automation, precision repeatability and long life in production environments. Applied Robotics provides rotary actuators that can help drive those efficiencies.
Designed for ease of integration in automation cells, our rotary actuators also allow for fully adjustable increments from 0 to 180 degrees.
Tell us about your specific requirements, and we'll find the right rotary actuators for your applications.
|
|
|
|
|
|
DRF - Flange Output Rotary Actuator
These new DIRECTCONNECT, flange mount rotary actuators, allow the payload inertia to stop directly through an independent hard stop mounted in the turntable, rather than through the drive mechanism.
Infinitely adjustable within rotation range
Dual bearing flange support
Magneto-resistive sensing
Adjustable hard stops
DRG - Shaft Output Rotary Actuator Series
These new DIRECTCONNECT, shaft mount rotary actuators, are an excellent choice for diverter gates, escapements and ejection stations where low precision end stop positioning and backlash are acceptable.
Infinitely adjustable within rotation range
Multiple mounting locations
Highly configurable. Multiple options
Features DIRECTCONNECT mounting
RR-Medium Duty - Flange Output Rotary Actuator
This medium-duty rotary actuator is ideal for payloads up to 15 lbs [6.8Kg] in weight. They are available in standard 45, 90, 135 or 180 degrees of rotation. Optional mid-stop and rotary manifold available.
Low profile and bearing supported turn table provides an extremely compact package for tight space applications
Payload can be connected directly to the turn table. Eliminates the need for a bearing block
Zero backlash, preloaded ball bearings, and slip fit dowel pins make this a very precise and repeatable rotary actuator
Air manifold option eliminates twiisted airlines
|
|
69-032/090-F
GENERAL CHARACTERISTICS
type of construction: with tie-rods
operation: double-acting
materials: AL tube and endcovers - NBR seals - other cementated steel
type of mounting: by means of holes in the body
type of mounting: any
Operating temperature: 0° + 50° C (with dry air -20°C)
standard rotation: 90° - 180° (others on request)
PNEUMATIC DATA
operating pressure: 0,5 -M0 bar
Fluid: filtered air, without lubrication
|
|
TORK-MATE - Pneumatic Actuators - 890 Series
The Tork-Mate 890 series extended life actuators are ideal for the operation of 90° turn devices such as butterfly valves, ball valves, plug valves, damper valves and other devices. Tork-Mate pneumatic actuators have features that are unique, providing many benefits to the user looking for worry-free service.
The Tork-Mate 890 series actuators feature pinion travel stops that allow a full /-10° of valve travel adjustment. As an option, extended stroke adjustment screws can be added for inexpensive throttling applications.
Special piston seals provide greatly extended life compared to standard O-ring actuators. All other bearings, seals and components have been engineered to provide superior and extended service lives.
|
|
Multi Act’s integrated motion actuators have an output shaft which produces both linear and rotary motions may be operated independently and simultaneously. Multi-act is available in three family sizes.
MAO series – Miniature series
Linear: Strokes 1, 2 and 4 inches, Force 100 pounds at 100 psi
Rotary: Rotations 0 deg to 90 deg and 0 deg to 270 deg
Torques 25 to 50 inch pounds at 100 psi
MA-1 Series – Heavy duty series
Linear: Strokes 2,4,6,9 and 12 inches
Force 440 pounds at 100 psi
Rotary: Rotations 0 deg to 90 deg and 0 deg to 270 deg
Torques 150 to 600 inch pounds at 100 psi
MA2 Series - Brute Force Series
Linear: Strokes 4 and 8 inches
Force 1900 pounds at 100 psi
Rotary: Rotations 0 deg to 110 deg and 0 deg to 290 deg
Torques 1800 to 3600 inch pounds at 100 psi
|
|
|
|
|
|
Turn-Dex is a rotary actuator with an internal unidirectional clutch. The output shaft rotates in one direction only and remains at end of stroke while the actuator is reversed. Turn-Dex is available in two series: the Comp-Act, incorporating the Comp-Act actuator and the Turn-Act, incorporating the Turn-Act actuator.
Applications Include:
Turntable Work Stations
Drive Conveyor Rollers or Belts
Drive Material Feed Rollers
Ratchet Type Drive
Sheet Feed Material From a Stack
Perstalsis Pump Drive
Low Speed High Torque Motor
Product Mixing
APPLICATION CONSIDERATIONS:
Overrun: The output shaft can be manually rotated only in its drive direction. Large loads may coast after the actuator has stopped. The output shaft cannot be reverse rotated- Forcing it backwards could damage the Turn-Dex.
Accurate & Repeatabte Positioning: Due to the overrun nature of the clutch external stops, brakes, ro«er and detents or shot-pins is required for accurate and repeatable positioning.
Special Options: Turn-Act will provide customized units to fit your specific application needs. Modifications include special shafting, special mounts, dutch housings with shot-pin cylinders, disc brakes and thrust protection. Consult your Turn Act distributor for additional information.
|
|
More reliability, more possibilities, more than just standard: modular round cylinder DSNU. A wide variety of variants and mounting options: the best solution for every application, both technically and economically.
• Diameters 8 ... 63 mm
• Stroke lengths 10 ... 500 mm
• X-strokes
• Standard types available from stock
|
|
Stopper Cylinders
EF1 Cylinder was modified for a conveyor stopping application.
Featuring a heavy-duty mounting, the cylinder's rod/bearing design was developed to withstand side impact loading.
Stroke lengths: 15, 20, 25mm.
Max Side Load: 12, 11, 10lb.
|
|
TOX-Powerpackage
Types with 2 - 2000 kN pressforce at 4 to 10 bar air pressure
TOX-Powerpackage - the energy saving Pneumatic intensifier with integrated oil system and automatic activated powerstroke. Our technology combines Pneumatics and Hydraulics providing you with the following advantages:
– Lower energy consumption
– Compact, clean design
– High stroke frequency
– Soft-touch: easy on your tooling
– Reduced noise level
The pneumohydraulic intensifier cylinder line-Q is the entry version of the well known TOX-Powerpackage, with the same quality. The cylinder can be mounted to any position. These cylinders are available off the shelf for immediate delivery.
Application range: clinching operations, sheet metal joining, punching, coining, press-fitting, mounting, bending, pressing and …many more
|
|
The range of hydropneumatic units represents a new work concept in all those fields requiring an application of force.
The units are the result of technical development where two applied techniques, namely the speed of pneumatic action and the high force developed by hydraulic systems are combined to give the units the required versatility in operation so as to achieve high levels of efficiency in the various fields of application.
Hydropneumatic units are designed for high cycling operation under conditions of maximum safety and minimum noise, but in no way are the essential features of a production machine neglected, namely:
* SPEED
* SILENT OPERATION
* ECONOMIC RUNNING
* VERSATILITY IN APPLICATION
* MAXIMUM SAFETY
|
|
|
Jack meeting the standard ISO 24562 Dia. 32 with 250mm. Complete range. Tie jack TRB, shaped PRA and PRB, specific jack agroalimentary ICL.
|
|
Jack meeting the standard ISO 24562
Dia. 32 with 250mm.
Complete range.
Tie jack TRB, shaped PRA and PRB, specific jack agroalimentary ICL.
|
|
|
Stroke is contained within the cylinder itself for space saving advantage. Allows force to be applied in both directions. Load capacities up to 8032 lbs. Handles high, off-center loads with consistently smooth operation. Recirculating ball-bearing system for wear resistance and repeated accuracy. Low breakaway. High bending moment capacity. Cost-effective alternate to auxiliary rail systems.
|
|
Rod Lock Cylinders
* The Bimba Original Line Rod Lock Cylinder is a normally clamped unit that holds the piston rod in position when air pressure is not present. It is ideal for preventing drift at machine shut-down.
* The rod lock air cylinder has dowel pins that ride in the cam groove. When air pressure is present, piston actuates and dowel pins follow cam to open position, allowing piston rod to travel freely through clamp. In the absence of pressure, the spring actuates the piston and dowels follow to closed position, activating the rod clamp.
* The Rod Lock is not a safety device. It cannot be used for intermediate stopping; the cylinder is designed to prevent drift from a stationary position.
* Load weight must not exceed the stated holding force for the cylinder.
* Bore sizes are 3/4", 1-1/16", 1-1/2 ", and 2".
|
|
|
Stroke is contained within the cylinder itself for space saving advantage. Allows force to be applied in both directions. Single acting, double acting, double purchase and track models available. Wide range for bore sizes and options
|
|
A space saving and guided cylinder with no equal. With a sealing system
unlike any other and endless possibilities including true synchronization
of two or more cylinders the ZR is worth a look.
The answer for dirty and dusty environments.
Available with slide or roller guide
Extremely low leakage
Smooth linear movement
High durability and operational reliability
Deliverable with a brake and encoder
Integrated valves if required
|
|
Ultran Rodless Cylinders
The Bimba Ultran rodless cylinder provides one of the highest coupling strengths available. This means it can carry higher loads without causing the piston to uncouple from the carriage.
Bimba also offers two magnetic coupling strength options (Gold and Silver) to suit a wide variety of applications. The Silver option uses two sets of magnets instead of three.
Bore sizes are 5/16", 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", and 2".
Bimba offers a model with built-in guides (Ultran Slide) and an unguided unit (Ultran).
Save space and streamline your design with the Bimba Ultran rodless cylinder! Application possibilities include transferring, feeding, door opening, cutting, silk screening and overall length savings.
|
|
Guiding cylinder
with two slide guides
with short slide guide
with safety unit
with slide guide underneath
Technical Information
· ZSS and ZKS have been designed for higher loads.
· By mounting a linear guide way on the bottom side of the cylinder, very high loads and moments can be carried forward
· Maximum stroke 3000 mm, longer on
· ZSS with two guiding carriages and a fitting length just like the ZS standard cylinder
· ZKS with a guiding carriage
|
|
Ultran Band Rodless Cylinders
Stainless steel cover strip protects sealed area, prolonging life.
Unique five-ported endcaps provide maximum flexibility.
All models come switch-ready with finely adjustable cushioning.
Available in a variety of bore sizes with stroke lengths up to 3m (10 ft).
Perfect for door opening, material handling/conveying, packaging and palletizing.
Variety of Mounting Kits available for use with each basic cylinder.
Bore sizes: 18mm, 25mm, 32mm, 40mm, 50mm, and 63mm.
|
|
The smallest rodless drive in the world. Available as standard with integrated guide and optionally with recirculating-ball bearing guide. Features: excellent guidance, higher characteristic load values and virtually leakage-free.
• All functional interfaces accessible from one side
• Optimised mounting interfaces
• Precision mounting interfaces
• Stroke range 1 ... 1,900 mm
• Electrical and hydraulic cushioning variants
• Option of second slide
|
|
Standard cylinder
0 - stroke compatible
Guidung cylinder with linear guide way
Technical Information
· ZS and ZK are the base for all other cylinder and the most required.
· Also called pneumatic cylinder rodless with internal guiding
· Different guiding systems can by mounted additionally
· With adjustable cushioning
· With magnetic piston
· C and dove tail nut in aluminum profile to mount sensors
|
|
|
Based on the ORIGA rodless cylinder, proven in world wide markets, Parker-Origa now offers the complete solution for linear drive systems. Designed for absolute reliability, high performance, ease of use and optimised engineering the ORIGA System Plus satisfies even the most demanding applications.
|
|
|
A new design of pneumatic band cylinders that offer maximum durability for optimal performance. The MX series of band cylinders offer three bearing choices to match your application needs. Profiled rail design used THK Caged Ball technology to reduce friction and extend actuator life. Solid bearing design reduces stress concentration by 59% for optimum performance. Internal bearing design is permanently lubricated for long, trouble-free service. Durable stainless steel bands are stronger and will not elongate like elastomer (non-metallic) bands, providing reliable sealing over the life of the actuator.
|
|
|
|
Pneumatic cylinders
