|
|
| Products 181 to 210 of 234 |
The outstanding short-stroke cylinder. Space-saving - powerful - tried and tested. With sensor slots for SM..-8/SM..-10 proximity sensor.
• Diameters 4 ... 100 mm
• Stroke lengths 2.5 ... 25 mm
• Hole pattern to ISO 6431 for attachment for diameters 32 ... 100 mm
|
|
All Stainless Steel Non-Repariable Cylinder
Corrosion resistant 303 Stainless Steel end caps.
304 SS body with mirror finish ID for long, reliable seal life.
Urethane rod wiper designed to withstand exposure to harsh chemical solutions while limiting ingress of the solutions and application matter into the cylinder.
PTFE-based rod and pivot bushings selected for their resistance to many commonly used cleaning solutions.
Nitrile seals are standard with optional high temperature or other materials available.
|
|
All Stainless Steel Repairable (Bell Ring Style)
* The new all stainless repairable Original Line cylinders are ideal for food processing, chemical, medical, pharmaceutical, offshore or marine equipment, and energy production or waste management applications. The bell ring design also offers the added benefit of full repairability without the need for hand tools by securing the body to the rod guide with a knurled, threaded nut.
* Bore sizes for the all-stainless steel repairable cylinders are 3/4" and 1-1/16".
* Engineering specifications include 304 Stainless steel body, low friction Buna N "U" Cup seals and rod wiper, 303 Stainless steel endcaps, piston rod, and bell ring nut, and Composite FDA approved rod bearing and FDA approved lubricant.
|
|
The first friction-free cylinder: extremely smooth surface of Ra 0.6 µm, highly corrosionresistant and repairable.
• Diameters 32 ... 100 mm
• Stroke lengths 10 ... 500 mm
• Constructed from of stainless steel
• Rod wiper seal material PUR
• Fully repairable (cover connected to profile)
• Food industry approved lubricating grease (to USDA-H1) and piston rod wiper seal (to FDA)
|
|
Stainless Steel Cylinders
Humphrey sensor switches are two types. Hall effect sensor swithches are electronic switches with no moving parts. They operate only on low DC supply voltage (10 to 28 VDC). Reed sensor switches are electro-mechanical switches which will operate on either AC of DC voltages (5 to 28VDC or 115AC)
|
|
Styles:
- Tie Rod "Clean" Round Body
- Clean Round Body
Ports:
- BSP and NPT
Materials:
-316 Stainless Steel
Action:
- Single acting/ spring return and double acting
Rod Styles:
- Single and double rod ends
Mounting Styles:
- All popular styles
Bore Sizes:
- Tie Rod:
- Metric: 25mm to 102mm
- Imperial: 11/2" to 4"
- Clean Round:
- Metric: 25mm to 76mm
- Imperial: 1" to 3"
Pressure Ratings:
- 10 Bar Pneumatic
|
|
Metric cylinders are standard cylinders that are available in 3 duty types:
Standard Duty
Our most space efficient duty. Short rod bearing and thin piston design. Available as single or double rod end.
Intermediate Duty (Half Husky®)
A combination of our standard and Heavy duty. long rod bearing and thin piston, designed for medium duty service. Available as single or double rod end.
Heavy Duty
Longer rod bearing plus longer piston. Designed for heavy-duty services. Available as single or double rod end.
Metric Options
Metric Accessories
|
|
Benchmark for the standard: profile slots for integrated cylinder switches. Wide range of variants and mounting options.
• Diameters 32 ... 125 mm
• Stroke lengths 1 ... 2,000 mm
• With adjustable end position cushioning (PPV)
|
|
ASCO/JOUCOMATIC offers a wide range of standardized (AFNOR NF E 49-004 / ISO 6432, 6431,15552 / CETOP / VDMA/ CNOMO) and non-standardized cylinders.
These pneumatic cylinders can be equipped with a lock, a guide unit or other equipment. Their applications lie in sectors of activity using automated processes, such as the automotive industry, conditioning, assembly, handling, etc...
|
|
ASCO/JOUCOMATIC offers a wide range of standardized (AFNOR NF E 49-004 / ISO 6432, 6431,15552 / CETOP / VDMA/ CNOMO) and non-standardized cylinders.
These pneumatic cylinders can be equipped with a lock, a guide unit or other equipment. Their applications lie in sectors of activity using automated processes, such as the automotive industry, conditioning, assembly, handling, etc...
|
|
Three-Position Cylinders
Bimba's Three-Position Original Line stainless steel body cylinder provides three positions with a single cylinder.
Bimba offers the performance and quality of the unitized Original Line cylinder design along with three positive stroke positions.
|
|
Three-Position Pneu-Turn
Rotary action of the Pneu-Turn Rotary Actuator is achieved through the use of a rack-and-pinion assembly. The speed of rotation may be controlled through the use of flow controls. The action at the end of the rotation can be controlled by the use of adjustable cushions, which are available as an option.
Ports on the Pneu-Turn may be repositioned to accommodate any airline configuration by loosening the three body retainer screws. The rack and pinion gear and ball bearings are pre-lubricated at the factory for extensive, maintenance-free operation.
Bore sizes are 9/16", 3/4", 1-1/16", 1-1/2", and 2". Each includes single and double rack models.
The Three-Position Pneu-Turn rotary actuators, in all bore sizes; both single and double rack can now be ordered as a standard catalog option.
|
|
* Smallest 3 Position actuator 3.10" x 1.54" x 1.50"
* Program any sequence
* Long Life
* Many operational options
* Choice of angles
* Uncluttered exterior, easy to clean
Strong shaft & bearings - 40 lb. radial, 30 lb. thrust
Magnetic switches for all three positions, easily adjusted
|
|
THREE POSITION ACTUATOR
• Mounting and layout dimensions are like standard dual rack unit of same rotation.(i.e. 90-0-90 degree unit dimensionally like 180-degree standard unit)
• Stop tubes are installed in left cylinders. Magnetic switches to sense central position should also be installed on the left cylinders.
• Generally, torque is equal to the single rack unit of same size; other ratings as for dual rack unit.
|
|
THREE POSITION ACTUATOR
• Mounting and layout dimensions are like standard dual rack unit of same rotation.
{i.e. 90-0-90 degree unit dimensionally like 180-degree standard unit)
• Stop tubes are installed in left cylinders. Magnetic switches to sense central position should also be installed on the left cylinders.
• Generally, torque is equal to the single rack unit of same size; other ratings as for dual rack unit.
• For plumbing diagram click on user guide.
|
|
THREE POSITION ACTUATOR
• Mounting and layout dimensions are like standard dual rack unit of same rotation.
(i.e. 90-0-90 degree unit dimensionally like 180-degree standard unit)
• Stop tubes are installed in left cylinders. Magnetic switches to sense central position should also be installed on the left cylinders.
• Generally, torque is equal to the single rack unit of same size; other ratings as for dual rack unit.
• For plumbing diagram click on user guide.
|
|
TRD Manufacturing
TRD Manufacturing Cylinders are recognized for their durability, high quality construction and long-lasting performance. Manufactured in several different types including, NFPA-interchangeable cylinders, specialized cylinders and accessories, TRD Cylinders represent a significant step towards Bimba's strategy to expand their industry-leading line of actuators.
Advantages of TRD Cylinders Include:
* Space saving design
* Many cylinder options to choose from
* Precision designed to provide accurate linear movement and positioning
* Other models include all stainless steel (SS) and electroless nickelplated (EN), and low friction for smooth operation (LF)
|
|
|
Tie Rod Cylinders feature the patented Enersorb® piston which provides exceptionally low breakaway, high energy absorption and reduced noise output. The floating bearing design allows for minor misalignment and surperior wear characteristics.
|
|
1. For oil pressures exceeding approximately 250 psi recommend option HP which adds 1" to 'C dimension
2. Switch bracket mounts to tie rod place as required for access and signal phasing.
|
|
NOTES:
1. For oil pressures exceeding approximately 250 psi recommend option HP which adds 1' to 'C dimension.
2. Switch bracket mounts by strap to cylinder; place as required tor access and signal phasing
|
|
| ... products without technical information |
| |
|
|
Pneumatic cylinders
