|
|
Three models are available:
* Professional cylinder with a non-guided carrier for small guided loads from 16 to 80 mm bores.
* Cylinder with a guided carrier and smooth bearings supplier, for moderate loads from 16 to 80 mm bores.
* Cylinder with a guided carrier and with crossed wheel bearings, for heavy loads from 25 to 50 mm bores.
|
|
| Versatile mounting in both horizontal and vertical applications. Stroke is contained within the professional cylinder itself for space saving advantage. Allows force to be applied in both directions. Six bore sizes. Self-lubricating bearing manufacturer rods, guide and support load the full length of the cylinder's stroke. Adjustable carrier maintains true tracking. Loads to 800 lbs. Maximum stroke range from 135 to 283 inches. Available in any incremental length. |
|
We manufacture air springs in an area of 4000 sqm.
We have approximately 200 sorts of products for trucks, buses and industrial trailers and we always increase our product range by studying on new models.
We continously increase our capacity depending on clients intensive interest and demand of the market.
Our aim is to reach 360.000 pieces for annual capacity in 2007.
We produce the air springs with high quality standarts by test applications and interval professional controls in professional production processes from raw material to end product.
We guarantee definitely our products in accorance with methods from the independence of production faults and specified properties .
We use special professional rubber and professional fabric for production of air springs which has improved professional chemical attribute .
As a result of this we can say that we have technical knowledge and equipment for the best acceptance standarts of air professional spring production.
Our products have not difference of quality from the OEM brands such as ; Contitech, Firestone, Goodyear..etc. However the important difference is our prices much more competitive than the others.
Our main principles is to have competative prices, high quality, honesty and long-term business opportunity for our customers.
|
|
The Series 60 cylinders have been designed to comply with the dimensions laid down] in the DIN/ISO 6431 standards. A permanent magnetic is mounted on the piston in these cylinders which enables, by means of manufacturer of proximity switches positioned along the professional cylinder tube, receiving information about the piston's position.
This cylinders series is normally equipped with adjustable end-stroke cushioning. Moreover these cylinders are equipped with a mechanical cushioning in order to reduce the impact of the piston as it reaches the end of the stroke. |
|
Series of round jacks:
MECSTREME Æ25 with 125mm resists corrosion
(stainless 304)
and REXTREME Æ32 with 80mm resists the acids
(stainless 316)
Conform to the standard ISO 15552.
|
|
Without corners and sharp edges - and yet outstanding! To ISO 6431/VDMA 24562. Rounded, easy to clean design, with integrated proximity transducer.
• Diameters 32 ... 100 mm
• Stroke length 10 ... 500 mm
• Rod wiper industrial seal made of PUR
• High corrosion resistance
• Food industry approved lubricating grease (to USDA-H1) and rod wiper seal (to FDA)
• Optional: flanged cover screws made of stainless steel
|
|
ISO 6431/ 15552 - VDMA 24562 - NF E 49-003 compatible cylinder - PEC type
Available functions :
* single acting
* double acting
* double acting, through rod
* ollow through rod
* supply on the same extremity
* rotation-proof device
65% volume saved compared to an ISO 6431 cylinder
|
|
Series KPZ Dia. 16 with 100mm, race 5 with 100mm.
Double jack and simple effect, tandem and multiposition, possible antirotation.
Crossing, hollow or hexagonal stem. Food by the back. Small overall dimensions.
|
|
The GLOBAL SERIESTM Professional cylinder has been a very popular addition to the Pancake® Line of cylinders. This rugged, space savings cylinder is loaded with features not found in others. Available as a "hard metric" model, this cylinder is truly the choice for the International market.
Features:
10 Bore Sizes (12mm thru 100mm)
Strokes from 5mm to 150mm
Machined from Aluminum Extrusion
Duralon® Rod Professional bearing for Reduced Wear
Prelubed with Magnalube-G® Professional grease
Chrome Plated Stainless Steel Piston Rods
Air & Hydraulic Service to 150 PSI
10 Mounting Accessories
3 Port Choices - NPT & BSP Parallel/Tapered
Metric or Inch Rod Thread & Mounting
Plenty of Options Available
Magnetic Piston Sensing Available
|
|
Powerful, reliable and economical: these second generation compact cylinders are highly convincing with their standardised dimensions, a broad product spectrum and out standing performance.
? Diameters 12 ... 125 mm
? Strokes to 500 mm
? Wide variety of variants and sizes - going beyond the standard
? Mounting accessories for practically any installation requirements
? Professional cylinder sensor on 3 sides
? Professional software and CAD data for easy, reliable design engineering
|
|
PS Series Linear Industrial slide
The PS series is a compact lightweight unit with a replaceable air professional cylinder. Floating piston rod coupling eliminates cylinder binding. Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance. Aluminum body and end blocks contain tapped holes and dowel pin holes for precision mounting or fixturing. Standard end plate to stop shaft vibrations.
Features:
Body: Anodized aluminum for reduced weight with multiple mounting surfaces with dowel location holes. Compact size for added space savings
Air Cylinder: Standard stainless steel body and rod for corrosion resistance and permanently lubricated for non-lube service.
Alignment Coupler: Isolates piston rod from side loading, increasing service life.
Optional Dampeners: Recommended for high cycle applications to absorb shock loading, and provides end of stroke adjustment.
Optional Proximity detector Sensing: For applications requiring end of stroke verification, available for extend and retract positions.
Rear Tooling Plate: Dampens guide rod vibration for smooth operation, and houses shock absorber for extend position.
Professional bearings: Four recirculating linear ball bearing for maximum load capacity that are sealed from contamination. Self-aligning for maximum guide rod support.
Guide Rods: Hardened steel to Rc60-65, precision ground and polished. |
|
Series CRS
PHDs newly redesigned Series CRS Professional cylinder now features a self-lubricating nitrile piston seal ring to increase cylinder performance and provides the best unit life rating in its class of 70 million linear inches of travel! In addition, this compact cylinder now features a clear anodized extruded body with integral slots for flush mounting of PHDÆs Series 6790 Miniature Switches for additional space savings. Optional shock pads extend cylinder life and minimize piston noise without increasing the length of the cylinder. The compact size of the Series CRS Cylinder makes it ideal for applications where cylinder length is critical.
Advantages: Compact size, eight bore sizes, integral switch slots, thru and threaded holes for easy cylinder mounting, available with two piston lengths. |
|
Features:
Tie Rods
- Stainless steel material prevents corrosion
Tube
- High strength hard anodized aluminum
- Superior wear resistance
Enersorb® Piston (Patented)
- Innovative design integrates industrial seal, wear band, magnet and bumpers into one component
- High Energy Absorption
- Bumpers reduce noise more than 50%
Piston Rod
- High strength, precision chrome plated steel
- Superior wear resistance
- Stainless steel rod available
Rod Seal
- Bubble tight carboxilated nitrile seal
Rod Wiper
- Durable urethane prevents contamination from harsh environments
Head, Cap & Retainer
- High strength anodized aluminum
Cushions
- Unique floating cushion seal
- Needle adjustment changes amount of cushion
- Seal design provides full flow out of cushion
Bearing manufacturer
- Unique floating design
- Machine grade bearing bronze material prevents rusting
- Superior wear characteristics |
|
| In addition to its broad line of standard catalog products, nearly half of Bimba's business consists of custom and semi-custom products designed for specific customers and applications. These products, used in machinery and automation, are sold to original equipment manufacturers and end-users throughout the world in an expanding variety of industries. |
|
When you use Parker Professional cylinder Genuine Replacement Parts, you are assured of the most up-to-date and reliable technology available.
|
|
HMI/HMD Gland Seal Kits Professional cylinder gland seal kits contain a replacement gland fitted with wiper and rod professional seals, plus a gland/head O-ring seal.
Supplied ready to fit, gland seal kits reduce machine downtime and avoid the risk of seal damage during installation of seals into the gland grooves.
A typical kit number, eg: RG2HM0221, denotes:
RG ~ Rod Gland kit
2HM ~ HMI/HMD series
022 ~ 50mm dia. rod
1 ~ standard seals, mineral professional oil, -20°C to 80°C temperature range |
|
MANUFACTURERS OF PNEUMATIC ACTUATOR EB-DW, DOUBLE ACTING
FEATURES
- Maintenance-free, continious lubrication
- Suitability for cocks with an angle of 90°
- Blow-proof shaft bearing suppliers
- Torques in agreement with EN ISO 5211
- Control pressure min. 2 bar, max. 10 bar
- Good visible elastic position indicator
- Function return by turning the supply plate:
Currentless - close
Currentless - open
- All elements of connection are made of stainless steel
Possibilities of mounting and accesories are shown in chapter 4.3.
GENERAL APPLICATIONS
- Water and wastewater technology
- Shipbuilding
- Swimming pool technology
- Bulk handling
- Pneumatic conveying systems
- Chemical industry |
|
When in doubt, opt for pneumatics: linear or quarter-turn actuation of process cocks, including Ex-protection. COPAC for gate valves and sluice gates, COPAR for butterfly and manufacturers of ball valves.
• Diameters 80 ... 320 mm
• Stroke lengths 40 ... 2,000 mm
• Force 2800 ... 47,500 N
• Double-acting
• Diameters 1 ... 880 mm
• Torque 7.5 ... 8,800 Nm
• Rotation angle 90°
|
|
Double-Wall Cylinders
One basic cylinder converts into six NFPA mounting styles.
Epoxy-coated aluminum tie-tube protects inner 304 stainless steel body tube from harsh environments.
6 NFPA supplier of rod end options and a variety of stroke lengths.
Bore sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4".
Quick delivery of catalog models - off the shelf to 3 days!
Custom designed cylinders available to meet your exact specifications and requirements. |
|
Jacks with stems HOERBIGER - ORIGA are recognized in the whole world for their robustness and their reliability in all the fields.
The various series, conceived according to standards ISO and VDMA guarantee a perfect interchangeability
|
|
| A unique solution for delivering the speed, accuracy & repeatability of electronic industrial actuators but with the force capability of pneumatics... |
|
- Great flexibility in use thanks to a modular concept
- Compact Design associating movement and positional checking
- 65 models of accessories
- Adapted to function as well in washing room as in foundry
- Weight Ratio/power optimized
- System of sealing offering a regular movement without friction
- Compact Piston allowing an optimum guidance
- Possible Intakes air of only one with dimensions or directional
- Lifespan of 8000 km minimum
- Possibility of being directly charged
- Diameters from 10 to 80 mm
- Races up to 6000 mm (12000 mm possible)
- Interchangeable and retro-adaptable Guidance
- Options of positional checking of integrable positions
- Option slow speed
- Option high speed
- Version with passive or active brake |
|
| Good choice where existing guided and supported loads require pneumatic actuation. Internal load-supporting professional bearing design offers high bearing surface for durable, dependable performance. Low breakaway and high speeds. Professional handles loads up to 370 lbs. Strokes of 20 plus feet. |
|
Flat Industrial cylinders
If your application is tight on space, our round, square, non-rotating, dual-power or three position Flat Line cylinders are the answer. These compact and repairable cylinders offer unequaled design, versatility and reliable performance.
Benefits of Flat Cylinders Include:
* 304 stainless steel cylinder body with a mirror finish I.D.
* Stainless steel fights corrosion and scoring from dirt particles
* Longer piston sealing life
* Oil impregnated bronze rod bushing is standard in all models
* Ground and polished 303 stainless steel piston rod
* High strength piston to rod connection
* Precision machined, anodized aluminum alloy heads |
|
|
|
Pneumatic cylinders
