|
|
Designed to turn power around any corner. Corrosion resistant components. Unique floating design maintains perfect alignment, allowing ease of installation. One-piece housing design eliminates leakage. Less than 1 degree of backlash on reversal on input. Shaft speeds up to 1200 RPM. Bores ground to 0.002" total tolerance. Prelubricated and ready for installation.
|
|
Features & Benefits
- Commercially available bearings and seals make maintenance trouble-free
- Off-the-shelf availability on most worm gear units and stocked in over 2500 locations in North America
- Modular worm gear design provides over 10 million configurations from stock components
- Double sealing capability on input and output shafts
- Dimensionally interchangeable with major industry competitors
- Units ship filled with oil
- Also available in Washdown Duty
|
|
CAT can designing and manufacturing high quality gears and gearboxes for:
• Steel and non ferrous industry applications:
• rolling mill stand drives, walking beam drives, flying shears, auxiliary drives etc.
• main winches drives for container cranes, harbour cranes, etc.
• main increaser for water/generator turbines, reducers for steam turbines/high speed gas turbines; re-circulation water pumps
• Ground equipment for space and aeronautical industry:
• Azimuth and Elevation gears and gearboxes for antennas and radio-telescopes,
• Manufacturing industry:
• Main and auxiliary gear drives for rubber and plastic mixers and extruders, cane and beetroot sugar mills, paper mills, stirrers, rotating mills and auxiliary equipment for cement factories and mines.
CAT can design and calculate in accordance with AGMA and DIN standards
We are also specialised in the refurbishment and overhauling of gearboxes of any size and make.
|
|
Standard Spiral Bevel Gearbox
The C-Series product line offers 2 standard ratios, with a simplified design using a cubic frame made with high stiffness aluminium alloy.
features
3 sizes 12 - 16 - 20
3 types A - left output B - right output C - double output
2 ratios 1:1 and 2:1
Spiral bevel gears with surface and heat treatments
Mounting possible from the 6 faces of the cube
|
|
|
Our worm gear units have a compact design with high torque capacity and are ideal for tough applications such as wash down environments. Our special solution allows you to have anti-corrosive protection similar to a stainless steel gearbox at a much lower cost.
|
|
|
Leakproof performance with low backlash. Substantially higher torque at low speed output, yet capable of running at more than twice the speed of the original Float-A-Shaft design. One-piece housing design eliminates leakage. Less than 1 degree of backlash on reversal on input. Shaft speeds up to 1200 RPM. Bores ground to 0.002" total tolerance. Prelubricated and ready for installation.
|
|
|
|
|
|
Worm Gear Speed Reducer, SW-1S
SW-1S, Solid Output Shaft Features
* Solid Output Shaft: 1/2" O.D. solid ground and polished steel, sintered bronze bushings
* Dimensions: 3 3/8" high x 3 7/8" wide x 3" deep
* Compression-molded glass-fill polyester gear box
* Gear: precision-hobbed nylon worm gears are low in cost, lightweight, and quiet running.
* Input Shaft: 5/16" O.D. ground and polished steel, supported by sintered bronze bushings, sealed to retain lubrication and keep out dirt
* Weight: 28 ounces, Weight may vary according to ratio
* Ratios Available: from 3.5:1 to 60:1 (all ratios are right-hand, left- hand worms gears are custom)
* Lubrication: Supplied factory lubricated with grease
* Mounting: SW-1 gear reducer mounting feet may be positioned at any one of eight locations. Additional mounting position options are available here.
SW-1S Speed Reducer, Custom Options
* Bronze worm gears, providing three times the torque capacity, are available for rugged applications.
* Stainless steel shaft (Please specify series stainless needed)
* Longer shafts lengths on input and output
* Left-hand worm gears
|
|
Shanghai SGR Heavy Industry Machinery Co.,Ltd. is one well-known manufactory in China. This company specializes in producing all kinds of gearboxes and gear motors.
Cone worm gear reducer (double-enveloping worm gearbox) we offer can provide high torque capacity and high efficiency. Besides, the gearbox runs smoothly and makes low noise.
Transmission ratios: from 10 to 63
Input power: 1.5 up to 450 kW
Torque range: up to 40 000 Nm
|
|
RC/DC series : PRIME Planetary Right Angle Gearheads
CONSTRUCTION FEATURES
• True planetary design
• Tapered roller bearings
• Low backlash design
• Input pinion with balanced clamp collar
• Quick installation
• Strong, caged roller bearings
• High reliability design
• High strength steels
• High shaft loading capacity
• Viton O-Rings sealed at each joint
• Case hardened spiral bevel gears
• Sealed ball bearings
• High efficiency design
• All gears are heat treated
• NEMA mounting standards
• 5 year warranty
|
|
Series W - WhisperDrive high precision servo gearheads are ideal for your most demanding motion control applications.
Inside the WhisperDrive is Cone Drive's true double-enveloping worm gearset. Offered in standard, low and zero backlash versions, you can always find the right solution for your application.
Proven reliability:
- Double-enveloping worm gearing provides high torque capacity, high efficiency, quiet and smooth running, and high torsional rigidity.
- Factory filled with synthetic gear oil, double oil seals and O-rings provide IP65 protection and leak free operation.
- Standard hollow shaft provides compact mounting which saves space and not needing a coupling saves cost.
- Integrated zero backlash bellows coupling provides fast, error-free alignment.
- Piloted motor flange mounts directly to any servomotor, NEMA motor, or IEC motor
- Three levels of Precision available: Absolute zero backlash for life, low backlash as low as 3 arc minutes and standard backlash.
|
|
Higher efficiencies, better performance, quieter operation: Our new model seriesdistinguishes itself with its reduced operating noise, compact design and its improvedease of assembly.
* minimal backlash (<5´)
* high output torque
* small installation space
* high degree of efficiency (96%)
* 11 Transmission ratios i=4,...,100
* low noise (< 66 dB(A))
* high quality (ISO 9001)
* universal mounting positions
* simple motor mounting
* permanent lubrication
* further options
* direction of rotation see page 31
* balanced motor connection
|
|
|
Ideal for use even with high loading, these gearboxes have a sturdy grey cast iron housing, hardened bevel gears lapped in pairs with spiral toothing and amply dimensioned anti-friction bearings for optimum running quietness and a high degree of transmission accuracy.
|
|
Gear for stepless height adjustment for sit/sit- or sit/stand work stations. The gear is adapted for both manual and motorized height adjustment. Deflection gear unit, predominantly adapted for manual sit/sit work stations.
- Ratio 1:1 or 1:2
- Housing made of reinforced glass-fibre
- Case hardened toothed wheels of steel, reinforced tooth system
- Particularly suitable for the driving with motor system KTS 3143
|
|
Based on the proven UNICASE design Getriebebau NORD has developed the compact geared motor NORDBLOC.
Features: corrosion resistant stainless steel lead screw with brass guides
easy to operate handwheel speed control as standard
optional electric remote speed control
wide selection of motors and brake-motors
analog and digital speed indicators available
rugged cast iron body
ground and polished driving disc for minimum wear
special cam mechanism only transmits the required torque, minimizing wear
asbestos-free non-hygroscopic friction disc material for long and safe working life
case is opened without special tooling for fast and easy maintenance
|
|
These bevel gears are characterized by a sturdy non-torsional and space-saving housing. Their wheel sets of alloyed case hardened steel have a Klingelnberg-Cyclo-Palloid gearing and are case hardened. The arrangement of the screw fastening faces enables a wide choice of fitting positions. Contact-less shaft sea-ling variants, as well as the connection for oil circulating lubrication, can be provided on request. Reinforced shafts are also available. Every precision application in the printing, paper, textile and tool machine sectors gains advantage from using this type of gearing.
Technical Data:
Torque (T2 nominal):30 up to 8,500 Nm
Transmission Ratio: 0.5 up to 5 iN
|
|
Neeter Drive (a division of Power Jacks) offers a vast variety of Spiral Bevel Gearboxes in its four ranges, features from the various ranges include ratios up to 6:1, hollow shaft, speed increasing, motor mounting flanges, and light weight aluminium housings. The original range, now known as the Range N features fine tooth gears (greater overlap ratio), shouldered shafts, O-rings in all covers and supplied with double rounded keys in the customer end of the shafts.
The Range N could be key to over come or help in your design and applications. Over many years this range has been adapted to suit customer needs; whether it's a minor alteration, including longer or, shorter shafts or even a simple spigot on covers this can be achieved. The main advantage of the units specifically adapted to meet customers needs, is that they allow the units to easily and neatly interface with the end product, saving assembly time and cost.
|
|
|
The reducers and motor reducers with Conical Couple Series GOLD/OM/OC are available in 4 sizes. Many reports/ratios of reduction, options of fixing, flanges of entry (series OM) for all types of engines, or with integrated engines (series OC) are available. Associated with the choice of output shafts (keyed hollow shaft, with hoop of tightening, simple or double tree leaving the right angle gear reducers with Conical Couple SNT allow to answer a broad range of industrial applications more exigentes.
|
|
The planetary gearboxes from SUMER-TRANSMISSIONS are high performance equipments intended for the following fields :
- Robotics - Servo-mechanisms - Space crafts - Aeronautics - Vacuum - Nuclear - Armament - Special purpose machines and special adaptations.
They are the outcome of many years of experience resulting from continuous exchanges with our customers, and from the use of the most sophisticated new techniques applied to the field of components and material quality, thermal treatments and precision machining.
These compact, hard wearing equipments offer exceptional characteristics for their size, taking into account their high torsion rigidity, low inertia of rotating parts, number of available gear ratios, or their lifetime in the most critical operating conditions.
|
|
|
Univeral right-angle gearbox coupling,consisting of two 45° helical gears that mesh at right angles. Designed to turn power around any corner, it can be operated in either direction and slides axially along the drive or driven shaft. Aluminum housing encloses the gears. Floating design maintains perfect alignment and eliminates the use of dangerous chain sprocket drives. Low torque journal bearing or a high torque sealed roller bearing series. Rated for a maximum of 500 RPM. Metric models are available.
|
|
- Model Number : 7201435016
- Product Name: Bevel Gearbox BA Range(multi-turn movenent)BA-3
- Remarks: Gearbox Specifications
The GREATORK AVA actuator range is combined with abevel gearbox for multiturn applications where screwed or keyed stems are used to operate the valve. AVA+BA combinations are available up to 8,135Nm torque and 1,557 kN thrust output.
Performance data:
Ratio:6:1
Max torque:40000
Max thrust:490
Screw:90
Bore key:Motor driven or manually optional
Output flange:F30
Weight(Kg):230
|
|
Spiral bevel gear units with hollow shafts.
Spiral bevel gear units with solid shafts.
Reversing bevel gear boxes.
Bevel gear boxes.
Torque from 2 to over 700 daNm
|
|
Light series KLM,
straight toothed KGZ,
spiral toothed KSZ,
high-performance gear KST
|
|
|
|
|
|
We have been in the manufacturing of excellent quality Bevel Gearboxes with our main mission of customer satisfaction. We have a well known position in industry as Bevel Gearboxes Exporter and Bevel Gearboxes Supplier. We always deliver these Spiral Bevel Gearboxes on time and with most. reasonable prices offered. We believe that our clients know us for the quality that we provide and are fully aware of our responsibility of catering to their needs and requirements in this regard.
We are very proud to say that with the help of high quality Bevel Gearboxes provided by us, we have been able to establish ourselves among the leaders of Bevel Gearboxes Exporter and Bevel Gearboxes Supplier. Bevel Gearboxes provided by us are trustworthy, manufactured using latest sophisticated technology. Each of our product is subjected to strict quality control measures to ensure that only the best in terms of quality and design reaches the market.
These drives are used primarily to transmit power at 90 Degrees or to Split Power from one Input Drive to one, two or three output Drives. They are also used as “Power Take Off” drives from one common shaft. The Ratio of Bevel Gears are standardized at 1:1, 1.5:1 & 2:1. Special ratios on request. Gleason standard Generated Straight Bevel gears, Hollow Shaft versions available.
|
|
SIPCO's TechnoGear® Spiral Bevels are for systems requiring a high degree of positioning accuracy and reliability. Our units are fabricated of quality materials and tested for your specific applications, to ensure dependable and durable service. Our spiral bevel gears with optimized tooth profile offer the best gear accuracy, backlash and silent running operation with 95-98% efficiency ratings.
SIPCO's TechnoGear® Spiral Bevels are available with...
- Twelve (12) standard sizes
- Ratios: 1:1, 1.5:1, 2:1, 3:1, 4:1, 5:1, 6:1 (8-10 opt)
- Double reduction: 10:1, 12:1, 15:1, 18:1, 20:1
- Speed increaser: 1:1, 1:1.5, 1:2
- Solid or hollow input/output designs
- Low backlash: 15, 10, 5 and 3 arc minute
|
|
Our reliable BK geared motor sets new standards for reliability, efficiency and economy and includes unparalleled standard features including hollow shafts in the smallest sizes.
Features and benefits
Product range
Power rating up to 45 kW.
Main features
* Torque 80 ... 18.500 Nm
* Output Speeds 0,2 ... 280 min-1
* versatile installation possibilities
* Completely enclosed, sealed against dust and water spray
* Lubrication change first after 15000 hrs
* Low noise gearing
* Mains connection 110 ... 690V, 50/60Hz
* Enclosure IP65 (Standard), IP66 (Optional)
* Connection Standard with CAGE CLAMP®
* Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
* CE-Mark
* CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
* Motors according to EN 60034
* Corrosion protection CORO1, CORO2, CORO3
Hollow shafts available through the whole product range in even the smallest sizes for easy cost effective application.
|
|
Technical data - Spiral bevel gearboxes:
- Type: K, L, H, LS, LV, MK, ML, MH, UL
- Size: 50, 100, 200, 230, 250, 300, 370, 400, 500, 600
- Ratio: 0,5 - 6
- Output torque: 10 - 8500 Nm
- Lubrication: Grease- or oillubrication
|
|
DESCRIPTION:
Leading applications: general purpose, medium and fractional power drives; reduction ratios and efficiencies higher than similar drives with two-stage worm/wheel units.
Design: housings and covers of aluminium die cast up to size 85, of cast iron for size 110; helical stage and single worm/wheel units; ratios up to i=10000.
|
|
DESCRIPTION:
Leading applications: general purpose, medium and fractional power drives; reduction ratios and efficiencies higher than similar drives obtained with two-stage worm/wheel units.
Design: housings and covers of aluminium die cast up to size 85, of cast iron from size 110; single helical stage & worm/wheel units; ratios up to i=800.
|
|
|
|
Right angle gearboxes
