Bevel gear reducers

78 companies | 203 products
Filters
  • What’s new?
    Submit
bevel gear reducer / helical - max. 125 000 Nm | FLENDER SIG series

The Bevel Helical Gear Unit is an optimized solutions for the task in the future. This...

bevel gear reducer / right-angle / low-noise / for conveyor belts - max. 173 000 Nm, i= 12.5:1 - 400:1

Not every mine offers enough space for complicated measuring, alignment and installation work. Also the need for specialist personnel to carry out assembly work represents a challenge to many a mine operator. Here, as the worlds only provider to do so, Siemens offers the perfect...

helical gear reducer / bevel / for bucket elevators - i= 18:1 - 80:1, 11.6 - 125 kNm

Siemens presents FLENDER gear units for bucket elevators, which are used for transportation of high volumes of bulk material to varying heights and dumping it without any dust creation. Typically, the height level is more...

bevel gear reducer / for paper machines - max. 820 000 Nm

Today's paper machines are well over 100 m long and, depending on the type of paper, up to 10 m wide, several floors high, and allow production speeds of over 2000 m/min, just to mention...

bevel gear reducer / for hydraulic turbine - i= 5:1 - 28:1, 8.5 - 195 kNm

A water turbine is a turbomachine that converts the potential flow energy contained in water into mechanical energy; this mechanical energy is subsequently converted into electrical energy in a generator....

{{productDetail[7015]}}
helical gear reducer / bevel / right-angle / precision - 10 - 120 Nm, 1:1 - 5:1 | KR series

This right angle gearbox by KR features planetary precision and numerous output and input...

bevel gear reducer / helical / industrial / compact - 28 200 - 210 000 Nm, 5.6:1 - 400:1 | HDO series

The state-of-the-art HDO - Bevel helical gear reducer is a top of the line product designed by Bonfiglioli. It comes in two versions either a single...

bevel gear reducer / right-angle - 3 - 3 000 Nm, 0.15 - 91 kW | RAN series

The RAN - Bevel Gears from Bonfiglioli are developed and created to be able to integrate the function of transmission...

bevel gear reducer / helical - 100 - 14 000 Nm, 0.22 - 150 kW | A series

The A series of BONFIGLIOLI are helical bevel gear motors made to provide...

bevel gear reducer / helical / explosion-proof - ATEX

Bonfiglioli gearboxes are suitable for potentially explosive atmosphere areas. The gearboxes...

{{productDetail[46]}}
bevel gear reducer / helical / explosion-proof - ATEX

Coming in sizes from small to large, the highly-efficient Tsubaki's gear box also provides an elevated transmission capacity. Years...

{{productDetail[5083]}}
bevel gear reducer / low-backlash / with output shaft - LK+/ LPK+/ LPBK+

Wittenstein's servo right angle bevel gear reducer provides the possible solution in all applications...

{{productDetail[6209]}}
bevel gear reducer / helical - max. 450 kW

Radicon can supply 8.5E 10 Mill coal pulverising gearboxes for coal grinding...

{{productDetail[16389]}}
bevel gear reducer / right-angle - 450 Nm, 76:1 | GKR

This 2-stage, low-maintenance right-angle gearbox for use in low to medium torque applications is characterized by its high efficiency, lightweight and wear-free gear teeth....

bevel gear reducer / helical / right-angle - 11 639 Nm, 1 936:1 | GKS

The GKS helical-bevel gearbox is a top of the line product designed and manufactured by Lenze. It is designed to deliver accurate and reproducible positioning...

{{productDetail[6239]}}
hypoid servo-gearbox / helical / bevel / low-backlash - 40 - 1 500 Nm | BSF series

The BSF helical-bevel servo gear units come with a low backlash and are ideal for the 40 to 1500 Nm (350 to 13200 lb-in) torque classes. These values are considerable lower than the maximum limit set for acceleration torques which can...

helical gear reducer / bevel / parallel-shaft / right-angle - max. 475 kNm | X series

The X Series of Helical and helical-bevel gear units from SEW-EURODRIVE are encased in a sturdy gear unit housing and are adjustable to fit exact torque ratings. They...

helical gear reducer / bevel / parallel-shaft / high-torque - 180 - 805 kNm | ML series

SEW EURODRIVE provides the central platform for customized applications with the ML series helical and helical-bevel gear units, utilized for connecting...

{{productDetail[283]}}
bevel gear reducer / right-angle / conveyor - i= 21:1 - 2 599:1, max. 13 400 Nm | BBB series

The Bevel Gear, complete with a Cyclo Drive, was designed and manufactured by Sumitomo Drive Technologies. This gear device integrates the adaptable capabilities of a singular-level...

{{productDetail[317]}}
bevel gear reducer / helical / right-angle - i = 11:1 - 26 000:1, max. 159 983 lb.in | Cyclo® BBB4 series

The Cyclo Bevel Buddybox 4 Series of speed reducers and gear motors, for BBB4, are...

bevel gear reducer / helical / right-angle - i = 11:1 - 26 492:1, max. 45 450 lb.in | Cyclo® BBB5 series

The Cyclo Bevel Buddybox 5 Series of speed reducers and gear motors are efficient and may be added for shaft...

helical gear reducer / bevel / parallel-shaft - i = 6.3:1 - 500:1, 4 900 000 lb.in | Paramax® 9000 series

Manufactured with an outstanding technology power transmission by Sumitomo Drive Technologies, the Paramax® 9000 Series are parallel and right...

bevel gear reducer / helical / right-angle / cooling tower - i= 6.3:1 - 15:1, max. 400 000 lb.in | Paramax® SFC series

The Paramax® SFC Cooling Tower and Air Cooled Condenser Drives are utilized for large industrial purposes. They have been specifically...

{{productDetail[15521]}}
bevel gear reducer / helical / right-angle - i= 3.55:1 - 10 000:1 | Browning® OtN 3000

The OTN 3000 Right Angle Helical Bevel Gear Reducers are offered as reducers or gear motors that have a torque capacity up to 120,000 inch pounds. These are enclosed...

{{productDetail[15945]}}
helical gear reducer / bevel - ML series

Spiral bevel gearboxes are designed with helical structure, that are available in models K, L, H, LS, LV, MK, ML, MH and UL sizes that range between 50 to 600 unit...

helical gear reducer / bevel / right-angle - MH series

Spiral bevel gearboxes from Vogel are robust units with corrosion protection and can deliver torques from 10 to 8,500Nm. These are employed for the operation of various...

helical gear reducer / bevel / right-angle - 100 - 13 000 Nm, i= 6:1 - 48:1 | MKS series

The Bevel helical line of gearboxes is fitted with MKS 1 and MKS 4 gear teeth in addition to a K lingelnberg spiral bevel toothing ground. The device features opposite direction rotation...

helical gear reducer / bevel / explosion-proof - ATEX | MKSH series

These ATEX approved helical gearboxes feature the MKSH 1, MKSH 4 Klingelnberg spiral bevel toothing ground. They have rotation direction that is opposite...

bevel servo-gearbox / helical / right-angle - max. 150 Nm, i= 3:1 - 10:1 | SK(N) series

The Servo spiral bevel gearboxes by Vogel Antriebstechnik is a Klingelnberg spiral bevel toothing with a gear teeth of SK (N) 050 SK(N) 200. The direction of its rotation...

{{productDetail[9352]}}
bevel gear reducer / high-torque - i= 1:1 | KEK series

Angular drives with high torques at very low dimensions
Housing: Aluminium, silver...

bevel gear reducer / stainless steel - DZR series

Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.
Housing: Stainless steel...

bevel gear reducer / right-angle - i= 1:1, max. 0.68 Nm | HUG series

The product is at type of a miniaturized right-angle device, that is intended for light duty applications. It...

{{productDetail[66929]}}
bevel gear reducer / right-angle - i= 1:1 - 4:1, max. 16 Nm | L series

The L series from ATEK Antriebstechnik, is a lightweight bevel gear reducer...

bevel gear reducer / right-angle - i= 1:1 - 6:1, max. 5 400 Nm | V series

Atek's V Series is part of the company's line of bevel gearboxes. Models of the series...

bevel gear reducer / right-angle - i= 1:1 - 6:1 | VL series

Manufactured by Atek, the VL series is a drive end housed in a motor bell,...

bevel gear reducer / right-angle - i = 1.5:1 - 2:1, max. 650 Nm | VS series

The VS series is a bevel gearbox that is integrated with a shaft which...

helical gear reducer / bevel / compact - i= 3:1 - 15:1, 22 - 1 400 Nm | VP, VPC series

The Type VP and VPC bevel gear boxes represent highly compact drive units, intended for highly dynamic applications in automation engineering. They feature drive speeds of up to 8,000 rpm and output torques of up...

{{productDetail[19992]}}
helical gear reducer / bevel / compact - i= 3:1 - 15:1, 22 - 1 400 Nm | VP, VPC series

CAT manufactures and designs high quality gearboxes in accordance with AGMA and DIN standards. With expertise in the refurbishment...

{{productDetail[27920]}}
helical gear reducer / planetary / bevel / right-angle - PV, HKF, FK series

Güdel manufactured a wide variety of components which includes Bevel gears. The bevel gears are available in many kinds of variants which includes...

{{productDetail[7320]}}
bevel gear reducer / for hydraulic Kaplan bulb turbine - 100 - 2500 kW, 750 rpm | TKF series

Eisenbeiss' bevel gear systems for bulb-type turbines use a bevel gear that is hard milled through an enhanced treatment. This process was performed to...

{{productDetail[108031]}}
bevel gear reducer / right-angle - H series

The Type H Bevel gears feature a robust and highly durable construction, with...

bevel gear reducer - 1:1, 2:1, 3:1 | K series

The K series is manufactured by Enzfelder, and is a bevel...

{{productDetail[63469]}}
bevel gear reducer / right-angle - max. 100 Nm

The Right-Angle Bevel Gear Reducer, manufactured by Heidrive GmbH, is specifically designed as a gear motor solution....

helical gear reducer / bevel / industrial - max. 80 Nm, IP40

The Gear Motor is ideally designed to provide an excellent quality performance and functionality. The high quality...

{{productDetail[14066]}}
bevel gear reducer / right-angle - max. 380 Nm | KL series

The INKOMA-spiral bevel gear unit type KL comes with the Klingelnberg spiral bevel gear which provides superior transmission of extremely high torque levels. These units provide quiet vibration free running and because of their symmetrical layout,...

bevel gear reducer / right-angle - 3 - 31 Nm | KG series

The KG bevel shaft mounting right-angled gear units (KG-0 to KG-3) are types of bevel gears that are considered compatible with the current Inkoma-precision screw jacks range HSG....

{{productDetail[64801]}}
bevel gear reducer - i= 1:1, max. 10 Nm | Model 3869 / 3870

Angular Gear, defelection gear, power devider and front gearing for electric motors, e.g. for blinds, actuator for special...

bevel gear reducer / for workstation height adjustment - i= 2:1, max. 4 Nm | Model 4802 / 4803 / 4813

The Bevel gear 4802, 4803, 4813 are specifically designed to provide an excellent quality...

bevel gear reducer / for large sun shades - i = 1:1.5, max 8 Nm | Model 3875

The Model 387 of Bevel Gear Reducer, manufactured by Ketterer, is specifically designed for large...

bevel gear reducer / for large sun shades - i = 1:1.5, max. 4 Nm | Model 3874

The Model 3874 is a series of bevel gear reducers from Kettere that is suitable for large umbrellas...

bevel gear reducer / for large parasols - i = 1:4, max. 1.25 Nm | Model 4808

The model 4808 is an instrument manufactured by Ketterer company. It is a...

{{productDetail[27646]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation