Other gearboxes

18 companies | 59 products
Filters

Low-backlash hypoid gear reducer with hollow shafts on either one...

{{productDetail[6209]}}

The Fine Cyclo® is a reducer by Sumitomo Drive Technologies that boasts a performance...

{{productDetail[15521]}}

ATLANTA presents BG-Servo bevel gear units. They have been especially designed for use with latest-generation three-phase AC motors and DC motors.

The units are available in 3 sizes with centre distance of 50, 63 and 80mm, and with 3 ratios of 4,75;...

{{productDetail[30002]}}

EtaCrown® angle gearhead is embedded with a very sophisticated technology, making it outstanding and efficient. Hence it is noted for delivering more power output, efficiency, productivity, torque and cost savings....

EtaCrown Plus is a compact drive unit manufactured by Zeitlauf. This tool is characterized by its high performance density, and a...

{{productDetail[14626]}}

The BOGIFLEX is a floating (shaft mount) reducer with self-aligning gear(s), which enables reduction of contact surface defects that exist on standard gear trains...

{{productDetail[11970]}}

CobaltLine®-CP Series Units are available in six sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 23 to 841 Nm.
The precision output bearing with high tilting capacity often allows direct attachment of heavy payloads without the need for further support, thereby...

Maximum torque capacity with extended temperature range

CobaltLine®-2UH Series Units are available in six sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable...

Increased torque range

CSG-2UH Series Units are available in ten sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 23 to 3419 Nm.
The...

Increased precision output bearing and flexible connectivity
The CPU Series Units are available in nine sizes with gear ratios of 30, 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 9 to 1840 Nm.
The precision output bearing with high tilting capacity often allows direct attachment...

The standard series
HFUC-2UH Series Units are available in thirteen sizes with gear ratios of 30, 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 9 to 9180 Nm.
The output bearing with high tilting...

{{productDetail[4733]}}

RV-E gears are the right choice for demanding drive tasks. If high torsional rigidity and tilt stability, as well as a compact design with large reductions are required, this is the solution.

The RV-E...

The RV-C gears have an identical design and the same quality features...

The RV series serves as the foundation of the entire Nabtesco product range. RV gears are components sets without integrated angular ball bearings. Due to the external bearing, they are very compact...

The RV-F series gears are an additional variant of the RV-E series. Nabtesco develops these gears...

High precision, high output speeds and a high degree of efficiency - these are the demands a drive unit should live up to for use in rotary tables. The NT series from Nabtesco meets these requirements. Thanks to their RV gear design, the NT reduction gears are...

{{productDetail[17051]}}

The RD series adopted a sealed grease type enclosed structure for the industry's leading...

Precision reduction gear head model for high speed rotation.
High speed precision reduction gearhead...

Specialized gearhead for machine tools
The RA series is a gearhead type design for use mainly...

RVTM reduction gears, already top sellers in the robotics industry, now evolved...

Basic model of the precision reduction gear that holds the world's top share with 4.5 million units produced.
Domestically...

{{productDetail[16592]}}

T series represents a wide range of TwinSpin high precision reduction gears with cylindrical shaped case.

T Series high precision reduction gears consist of an accurate reduction...

E series represents a wide range of TwinSpin high precision reduction gears with flange shaped case.

E series high precision reduction gears consist of an accurate reduction...

H series represents high precision reduction gears TwinSpin with through holes in the shafts, also known as hollow-shaft version.

Cables, tubes...

M series represents high precision reduction gears TwinSpin of mini sizes.
The first representative of the series is the size TS...

{{productDetail[54577]}}

Function :
Link between a motor shaft and another
parallel shaft in order to reduce or to
increase the motor speed.
General specifications :
l Easy to install and to adapt
l Gear casing FT 25 in cast iron
l High efficiency...

{{productDetail[11968]}}

SIZE AND WEIGHT:
1,430 x 700 x 560 mm - Weight = 4,000 kg
TECHNICAL CHARACTERISTICS:
Ratio...

{{productDetail[19748]}}

Onvio's Dojen™ cycloidal speed reducer has been providing engineers with the highest precision servo reducer available on the market for more than 25...

Onvio's New Dojen™ High Torque cycloidal speed reducers offer the same high precision as the standard series with a few advantages. An advanced...

{{productDetail[7152]}}

Torque Range
Up to 20,000Nm
Input Power Rating
0.04kW ... 55kW
Ratios
single stage 9,11,17,23,29,35,43,59,71,87
double stage 121,187,289,385,473,595,731,989,1225,1849
Input...

{{productDetail[60938]}}

ZZ-Servoline KN has been designed as a bevel gear unit especially for high-dynamic servo drives in automation techniques. With the hypoid gearing, gear ratio's of up to
i = 15:1...

{{productDetail[54841]}}

The Harmonic Driver X50 series is typically used in computer numerical control (CNC) machines,...

The X10 series is a harmonic drive used on various applications such as CNC...

The units in the Harmonic Driver X20 series are ideal for applications such as CNC...

The X30 series is a line of harmonic drivers manufactured by I.CH Motion. It is suitable for use in various applications,...

{{productDetail[70265]}}

The item is perfect decision with powerful gearbox in reduced bundle. The cycloidal configuration gives substantial measure of contact surface region in the...

The Circulate 3000 DI option is an instrument manufactured by Shempo company. The DI Series has a base mount configurations, and it can be directly dropped-in to replace...

The Cycloidal Reducer Circulute 3000 Mount Servo, manufactured by Nidec-SHIMPO, is specifically designed for servo motor applications. It also ensures a high level of performance...

The Circulute 3000 Pulley is a cycloidal gear reducer that is configured to fit Circulute series and is designed in a pulley style type that provides a small foot less drive function. This...

The Circulute 3000 directly replaces many of the worm gear and other gearbox packages commonly used for overhead conveyor applications. The new configuration is the ERD Series. NIDEC-SHIMPO refers to ERD Series as the Chicken Drive as it finds applications...

{{productDetail[11663]}}

The CR series is a cyclodial style reducers manufactured by CDS. This series covers a wide range of diminution ratios, with greater load handling limit. It is free from vibration execution with extreme proficiency. These...

{{productDetail[26477]}}

With magnetic gearboxes, GEORGII KOBOLD reveals an entirely new transmission technology:

Do you need high speed in your application, but don't want to do without a high power density? Do you have the highest requirement...

{{productDetail[55581]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation