|
|
| Products 181 to 210 of 354 |
MASTER MEND:-
! Unique design for comfortable & efficient mending operation.
! Top & bottom illumination for efficient mending.
! Hands free foot operated with fixed speed drive.
! Machine with any input & output of Roll/ Pile can be manufactured.
! High production efficiency with minimal operator fatigue.
! Available in various working widths.
|
|
Used by wholesalers for rewinding decorating textiles, upholstery, clothing and other technical fabrics.
* Maximum roll diameter 40 cm (other dimensions on request)
* Flexible and modular concept.
* One person operation
* Inspection table with back lighting
* Accurate length measurement system
* Winding up station with adjustable speed control
* Power supply 230V, 50/60Hz, 1 kW
*Several options are available as loop control device and special equipment for tensionless inspection.
|
|
|
|
|
|
TENSIONLESS INSPECTION MACHINE
FOR ELASTOMER FABRICS WITH RELAX BELT WITH PLATFORM
Mod. ISRP 220
The inspection, winding tensionless machine
ISR 07 TENSIONLESS,
provided of axial or tangential unwinding for big rolls, it, an excellent machine for the elastomer fabrics.
The fabric gently comes situated, in the form of small folding, on a conveyor belt, that allows it to relax and particularly as it regards the elastic materials to resume its own elasticity. An additional conveyor belt incline (Exclusive Patent COMATEX) accompanies the fabric, without altering its acquired stability, to the summit of the table of inspection illuminated, where possible to view and mark the defects eventually found.
Before the end phase of winding, a special software Comatex combined to the electronic sensor of tension, it allows to maintain results of relaxation and to get rolls without residual tension.
Technical characteristics:
Inlet fabric from J-BOX with synchronization / Small rolls / Plait / Big rolls
Relax conveyor belt
Patent conveyor belt
Inclined inspection table with rear light
Up light
Platform
Auto-centring winding unit
Reading fabric tension with adjustment of the bad tensions
Winding of the roll
Adjustable compactness of the rolls
500 mm diameter knitted fabric rolls
360 m/min. speed control without step.
Optional:
Digital weight measuring system
Automatic linear cut
Wood or special light
Comatex software for store all the faults
Barcode labelling for more type of error
Mark-fault one or more fault
Doubling system in 2 or 4
Packing system
|
|
|
|
|
|
Infrared thermography is an effective approach to non-contact measuring of temperature distribution for a range of applications. To use this approach also in industrial process control, InfraTec offers INDU-SCAN as a modular test system based on thermographic cameras for a variety of performance ranges for stationary applications.
The thermographic camera is installed in the immediate proximity of the process to be monitored. To withstand unfavourable environmental conditions, the camera unit can be protected with a housing and an air purge unit. To cover large monitoring requirements, the camera can be mounted on a pan/tilt head. Using digital data output is an excellent pre-requisite for flawless and long-term stable processing of all pixel temperature values of the image. The image can be synchronised with the process rate. Over a connection line with varying length, if required a glass fibre transfer line, the data is passed on to the evaluation unit based on an industrial PC with a colour display.
|
|
|
|
|
|
Cygnus 4 - General Purpose
Multiple Echo Ultrasonic Thickness Gauge
A compact general purpose Ultrasonic Thickness gauge using our Multiple Echo technology, suitable for use in most hand-held industrial or shipping applications. The LCD display is easily read outdoors, and has a backlight for use in dark areas. The Cygnus 4 is supplied ready to use as a complete kit in a protective carry case.
Supporting Infomation
See IACS document covering requirements for ultrasonic thickness measurement in Shipping.
See Weathering Steel for Highway Structures - Residual Steel Thickness Measurement Using Ultrasonic Gauges
Features
Backlit digital display for easy viewing from bright sunlight to
complete darkness
Rugged construction - shock proof - protected to IP65
Stable calibration - linear accuracy - no zero adjustment
Self verification of the measurements to ensure accuracy
Various probe options
Displays sound velocity settings
Echo strength indicator to aid measurement
Calibrates to a known thickness or a known velocity of sound
Probe frequency selectable
Low battery warning
Metric / Imperial switchable
Applications
Metal thickness monitoring on cranes, marine structures and conveying systems.
Corrosion checks on ships shell plates, bulkheads and structures.
Metal thickness safety checks on steam and pressurised water systems,
transportable gas containers and compressed air systems.
Systematic wall thickness and corrosion monitoring of storage tanks, process vessels and road tankers.
Quality assurance metal thickness checks.
For more information, please visit www.cygnus-instruments.com
|
|
|
|
|
|
The Link Instruments' Ultra Measure Ultrasonic Thickness Gauge is robust, easy-to-use, with variable velocity calibration that can be set to suit most materials. The Ultra Measure is calibrated to a mild set test bit and can be re-set if required, using the variable velocity + and buttons for different materials. The unit is fitted with a LCD Display back light for use in bad lighting conditions. The unit can measure from 1mm to 199.9mm and has a resolution of 0.01mm; it is accurate to within 0.1mm. The Ultra Measure complete kit, with its high specifications, is available at a truly affordable price allowing the issue of such equipment to more engineers.
Key Features:
Robust 5Mhz Transducer with split crystal protection to prevent any contamination
Simple user calibration at any time
Back Light for LCD Display
Rugged IP65 plastic casing and industrial keypad
Heavy Duty Instrument outer protective rubber boot
6 hours life with (4) "AA" alkaline batteries
Five year Instrument warranty
Two year Transducer warranty
Inch or mm reading selection
Specifications:
Dimensions: 6.5 x 4 x 1.75 (165 x 100 x 43mm) approx. Enclosure: Plastic
Weight with Batteries: 0.10lb (300g)
Display: 2 row 16 character LCD display (Back Lit as required)
Frequencies: 4 to 5Mhz
Ultrasonic device max sound level 73dB re 1uPa at 40V peak to peak Power: 6VDC via 4 X 1.5VDC AA alkaline batteries (6hours continuous use)
Measuring Range: 0.045"- 4.000" / 1.0mm 199.0mm depending on transducer, surface condition, temperature and material.
Display Resolution: 0.001 or 0.01mm.
|
|
Snap-Cal - 461 Series
Spring-loaded travel
Inch/mm conversion
Wide faced flat jaw for easy positioning
Hardened stainless steel construction
Supplied in rugged holster
|
|
Fast Check Thickness Gage
Recommended for quick thickness checks of flat sheet materials and wide variety of small parts. Supplied with hardened steel gaging contacts, lifting levers, and clockwise continuous dial indicators.
|
|
|
|
|
|
Nor-Cal offers an extensive selection of commonly used quartz crystal feedthroughs, sensors and multi-channel monitors, cables, quartz crystals, accessories and replacement parts for use in semiconductor, optical and industrial thermal deposition processes. Custom feedthroughs are available with a variety of flanges in all sizes.
Our coating instrumentation products support one of the more popular methods of thin film measurement and rate control _ the crystal monitor, which utilizes the piezoelectric properties of a quartz crystal.
The electrical characteristics of the crystal, which is held in place by the sensor, change during deposition. Single sensors are generally used for short deposition runs, whereas, dual sensors allow for longer runs. Dual sensors require an airline to operate a pneumatic shutter which covers one crystal at a time. The sensor is either welded to the feedthrough or attached with connectors. Most sensors are available with cooling lines.
The application determines the correct choice of sensor. The sensor determines compatible feedthroughs and cabling. The chamber determines the appropriate feedthrough and flange. For application temps up to 150C, electrical connection between the sensor and feedthrough is accomplished with a vacuum coaxial cable. A bakeable, one piece sensor/feedthrough replaces the standard in-vac cable with a stainless steel high-temp coaxial line for high temperature applications up to 300C.
|
|
INFICON market-leading thin film deposition controllers and monitors control deposition rate and thickness of the most complex processes with unsurpassed measurement speed and precision. Enhanced software and logic I/O features allow the INFICON Thin Film Deposition Controller to be fully integrated into the vacuum system for automatic process control. To control less complex processes, use INFICON economical, precision controllers and monitors that measure films with 100 times more precision than conventional techniques.
All INFICON crystal-based instruments use our patented measurement system, ModeLock, making them the most advanced instruments available.
INFICON superior quartz crystals offer the highest reliability for millions of successful process runs. Available in 5 or 6 MHz with gold or silver electrodes, INFICON crystals are 100% factory tested to ensure quality.
|
|
GAPMAN
Portable Electronic Feeler Gage
GAPMAN is the world's first high precision, non-contact, portable electronic gap measurement gage. It features a dual capacitive sensor for position-compensated measurement and easy insertion into very narrow gaps down to 0.009" (0.23mm) in a wide range of parallel and roller gap applications. Microprocessor based and application software driven, GAPMAN records and stores data points for easy transfer to SPC and other quality systems. Additional information is available.
|
|
Today, more than 3000 LMI/Selcom laser triangulation sensors are used throughout the tire manufacturing process worldwide. Sensors monitor thickness, profile and ply overlap, to name just a few applications. In-process sensing provides immediate feedback at critical stages in the production process. In this manner, faults may be found immediately and corrective action quickly applied.
Providing reliable data from surfaces with rapidly changing colour and surface properties, LMI systems integrate high frequency response 2D and 3D profiles from surfaces, monitoring items such as radial run-out, side wall profiles and tread extrusion contours.
Our Rubber & Tire applications division works closely with System Integrators & Original Equipment Machine Suppliers and Tire Manufacturers to deliver the most effective solutions for their particular sensor vision needs.
|
|
Dynamic Systems Testing
Zwick provides test rigs and portal frames for the dynamic testing of systems components, which are designed in conjunction with your needs.
|
|
The shearography tire test systems from Steinbichler Optotechnik have been developed for the non-destructive testing of new tires in R&D and quality control, as well as for the inspection of tire carcasses in the retreading industry. The technical basis of the systems is the TV shearography system.
During the test cycle, a low pressure (e.g., 50 mbar pressure difference) is generated in the vacuum chamber, thereby inducing deformations which are caused by the expansion of air pockets occuring in faulty areas in a tire carcass. With the TV shearography technique - a holographic measurement method which reliably detects material deformations in the range of microns - faulty areas can be localized clearly and reproducably.
The Intact systems by Steinbichler Optotechnik have successfully proven their functionality in the worldwide car-, truck-, and aircraft industries, as well as in the Formula 1 racing tire business.
|
|
Tire Balancer
Fully Automatic TIRE Balancer
The YAMATO brand tire balancer measures the unbalanced points & value automatically on the tire product line.
Dynamic Tire Balancer
The tire is inflated and then rotated at a constant speed.
The TB-D1 calculates the unbalanced points by measuring the centrifugal force generated from the deviation between the center of rotation and the center of gravity of the tire.
|
|
The measuring software SAPHIR makes this microscope an universal, though manual 2D-microscope, state-of-the-art tool. Esspecially while making first samples, the WM1 in combination with SAPHIR takes full advantage of its strenghts and capabilities.
Modular design, high optical quality via especially good surface light illumination and an excellent data reporting, these are prominent features of these microscopes.
|
|
|
|
|
|
Boomerang long endurance loitering and surveillance system
The Boomerang is a man-portable, Catapult launched, electrically powered loitering surveillance and reconnaissance UAV, modeled as a flying wing. With full autonomy, from launch to parachute recovery (to a predetermined location), the Boomerang delivers ease of use, large payload capacity (2.5Kg) and high reliability.
Operates in both day and night for a range of 35 Kilometers, and 3 hours endurance.
The Boomerang is equipped with a miniature, lightweight electro-optical, stabilized, airbone sensor which was designed to be carried by a miniature UAV, for tactical "Over-the-Hill" reconnaissance in daylight and optionally at night.
The payload's main features:
Operates in the following modes: Observation Mode (Joystick Rate Mode), Point to Coordinate Mode, Target Tracking Mode, Scan Mode
Designed especially for Miniature UAVs for Over-the-Hill applications.
Very light weight (750-1000 gr).
Line of Sight control by Operator.
Gyro Stabilized picture independent of A/C maneuvers and vibrations.
High resolution Color CCD Camera with 10x optical zoom lens for
day observation.
Night observation capability - Optional.
RS-232 Communication Link (secondary channel)
|
|
Multi Configuration Tactical UAS
Reliable visual intelligence in all weather conditions
The SkyLiteB was designed to supply immediate and independent visual intelligence for the Army, HLS and Civilian markets. It meets the required operational needs for tactical Visual intelligence asset acquisition, providing extended range, enhanced visual intelligence and real time gathering capability in stringent situations.
The SkyLiteB is specifically designed to allow critical, visual recognition of elements in real-time and gain dominant situational awareness of the inspected area. The system can be carried by 2 operators with the overall weight of
20 Kg for each and It flies in almost any weather condition (up to 40 Knots). The SkyliteB can be operated in a long endurance mode with longer wing tips and higher capacity battery.
The SkyLiteB offers:
Rain and High Wind Operation
Complete ISR and Tracking Solution
Operational Flexibility
|
|
|
|
|
|
Tactical Micro UAV System
The MicroB, Bluebird's micro UAS, weighs only 1Kg but features exceptional, unprecedented capabilities, considering its small size and low price.
The MicroB is the smallest UAS in the world, with an intergared advanced, cutting edge, proprietary stabilized video camera, designed to provide high quality ISR (Intelligence, Surveillance and Reconnaissance) and high-resolution images.
The MicroB delivers full autonomous capabilities, all weather stealthy operation, high reliability, high life expectancy and unprecedented ease of use, all in a small and cost effective platform. It can be autonomously launched within seconds even in a crowded urban environment, and provides up to 1 hour of real-time, enhanced visual intelligence in stringent situations.
With its small size and fast deployment, the MicroB allows critical, visual recognition of elements in real-time and gain dominant situational awareness in any tactical circumstances.
Operational Flexibility
The MicroB is packed in two carry-on briefcases. One briefcase contains the portable GCU with tripod based communication box and the launcher, The 2nd contains the MicroB UAV platforms, folded and ready to fly. Each briefcase weighs about 7Kg.
|
|
Features:
- Portable, handheld units
- Battery operated
- High resolution display
- Temperature compensation
- Interchangeable transducers
- Windows software
- Built-in probe zero block allows easy exchange of transducers
- Regression analysis for custom material calibration
- Windows software to download measurements create reports, and upload test parameters
- Direct-to-printer reports
|
|
Non-destructive measurement of paint, plastic, enamel and other insulating coatings applied on wood, plastic, glass, ceramic and also on metals according to the ultrasonic principle.
Measurement of a multi-layer system in only one measuring process
High accuray and reproducibility
Storage and documentation of measuring values
Measuring range: 10... 500 m
Memory capacity: max 10,000 readings
|
|
Ultrasonic Thickness Gauges are designed to improve safety and ensure reliability of material subject to corrosion or erosion.
Corrosion gauges with their dual-element transducers are the primary inspection tool used to measure the remaining walls of components such as pipelines, pressure vessels, storage tanks, and numerous other applications..
Precision gauges use single-element transducers to provide the thinnest range and highest degree of accuracy possible. Common applications include metals and a variety of non-metals (i.e. glass, ceramic, plastic, etc.).
We offer a wide variety of instruments and probes to offer the best solution for your specific application.
|
|
The widest range of low frequency transducers available for ultrasonic testing of concrete and other coarse-grained materials.
Low frequency transducers for ultrasonic testing of concrete and other course grained materials.
Shear Wave transducers (pictured above) are used in combination with compressional wave transducers to calculate Poisson's Ratio. The line of general-purpose compressional wave transducers feature robust PZT elements in stainless steel.
|
|
Sampling frequency reach up to 160MHz
Color TFT LCD display
Memory up to 1024 A scanned images, parameters and 64000 thickness values
32 detecting channels are available with separated detecting parameters and DAC curve in every channel
Equipped with gate setting and alarming function
Two scanning modes: A scan and B scan
Auto gain and manual B scanning
USB 1.1,fullspeed communication port available
Can be connected with PC to print out result
Pulser voltage adjustable
|
|
|
The EPOCH 1000 Series Digital Ultrasonic Flaw Detectors combines the highest level of performance for conventional portable flaw detection with the power of phased array imaging. The EPOCH 1000, 1000iR and 1000i feature a new horizontal case style with full VGA display, knob and navigation arrows for parameter adjustment, and full EN12668‑1 compliance. The advanced conventional ultrasonic functionality of the EPOCH 1000 series is augmented in the EPOCH 1000i with phased array imaging capabilities
|
|
For over 20 years the Masterscan name has meant exceptional performance with class leading design, and the 350M and 380M continue this tradition. The latest developments in amplifier and pulser technology deliver higher levels of near surface resolution, penetrating power and excellent signal to noise ratio. Typical applications are thin walled components, turbine blades, spot
welds, power generation (including EMATs), large castings and forgings.
|
|
|
The Sitescan delivers high performance and advanced features, yet our engineer's experience in user interface design has ensured it is easy and quick to use. The acknowledged ease of use of previous generation Sitescans has been enhanced with the menu navigation scroll-wheel, providing easy access to functions. The menu structure has been designed to guide the user through their task with operation quickly becoming second nature. The Sitescan D-10 uses a broad band amplifier compatible with a wide range of transducers whilst the D-20 model uses several narrow bands for improved performance. The analogue feel from the high quality broadband amplifier shows all the detail required to identify defect types such as holes or cracks, and sufficient resolution for identifying small signals. Typical applications are weld inspection, corrosion testing, small castings, forgings and delamination checking.
|
|
GE Inspection Technologies is the world's leading developer of ultrasonic instruments, testing machines, transducers, and software for industrial applications requiring internal defect detection and sizing. GE Inspection Technologies' nondestructive ultrasonic testing solutions will meet the critical requirements of your unique application and deliver productivity, quality, and safety.
|
|
Minisonic ISD detects the changes of products in a pipeline by measuring the speed of sound. The speed of sound is a precise specification of the product and has a correlation to density or concentration.
Minisonic ISD is also a detector of the passage of pigs and spheres in a pipeline by the analysis of the acoustic signal.
The measurement of the speed of sound depends on the temperature and pressure conditions, so it is necessary to use a numeric corrector to obtain the real measurements.
The Minisonic ISD is available in a standard or explosion proof model.
|
|
Product info: A scan thickness measuring, easy for users to identify the measuring errors by analyzing the waveform on screen.
Function of echo-echo measurement is available. It is used for measuring the distance between echo to echo, and thus users will get to know the thickness of steel plate even though it is covered by coating, such as inspection of oil tanks.
Min. and Max. mode function is supplied for users to find out the Min. (or Max.) value from a group of measuring results. it is very useful for inspecting the wall thickness of pipes and pressure vessels.
Manual gain adjustment / auto gain selectable
Up and low limits alarm is available
D-value mode function. It comprises normal D-value mode and percentage D-values mode. It will enhance operator's working efficiency greatly. Specially, users working with exact and changeless process requirements will benefit from TT500 immensely.
Large memory up to 100 A-scan images and 10000 thickness values.
|
|
|
|
Inspection machines: NDT, Visual inspection, ...
