Form and surface measuring instruments

66 companies | 186 products
Filters
  • What’s new?
    Submit

The exact measurement of workpiece contours demands high precision metrology in connection with an efficient evaluation software. The stationary contour measurement systems...

The optimum combination for roughness and contour measurement is provided by the intelligent arrangement of both probing systems. Roughness and contour are measured by two different probing systems....

The HOMMEL-ETAMIC surfscan provides two measuring instruments in one: Roughness and contour measurements can thereby be performed in a single measuring run, even on curved and sloped surfaces. The universal measuring station can be used for a flexible range...

With the compact F50 form measuring system you perform roundness measurements quickly and accurately.
Features
- Universal roundness measuring...

The F135 and F155 measurement systems are the best choice for measuring the roundness and cylindricity of your precision parts.
Features
- Universal system for cylinder form measurements with extensive evaluation functions
- Automated measurement...

{{productDetail[6011]}}

High-accuracy CNC contour/form measuring
instrument.
The X1-, Y- and Z2-axes have a maximum
drivespeed of 200mm/s.
This permits high-speed positioning that can
potentially result in a large increase in the
throughput of multiple-profile / multipleworkpiece
measurement...

This product is one of the most highly accurate surface roughness measuring instrument which helps the CNC measurement of surface roughness and contour. The maximum speed of each axe is of 200mm/s, which allows high-speed positioning for increased throughput...

Mitutoyo Formtracer Extreme CS-5000CNC is a stylus type CNC surface measuring instrument. It provides highly precise, simultaneous measurements of surface roughness and form/contour.

Maximum drive speeds are 40mm/s for X1 and 200mm/s for Z2-axes. This prevents positioning...

Surface Roughness and Contour Measuring System
Equipped with a wide range and high resolution Z-axis detector.
Measuring range
Z1...

This particular model in the line of Mitutoyo Japan's surface roughness measurement instruments features an enhanced overall drive velocity (X1 axis:80mm/s,...

{{productDetail[4906]}}

The VM 182 comparator system provides acceptance testing, inspection and calibration of machine tools along with a measuring equipment with traverse ranges up to 1520 mm. The VM 182 can...

{{productDetail[155]}}

If users are looking for precision quality control of crankshafts through a high-quality...

This checking machine for crankshafts provides a quality control system for crankshaft castings...

{{productDetail[14345]}}

The MG121 enveloping circle gauge by Schaeffler Germany provides high accuracy in calculating enveloping circle interiors, as well as cage assembly. This is achieved by the device's two...

Schaeffler's MGA31 enveloping circle gauge (with optional removable and interchangeable outer rings) is utilized for standard...

{{productDetail[169]}}

The Surfcom and Countourecord machines from Zeiss are made in the 1500 to 2900 series with one base column for every model. The sensors are the only items that will change. Added sensors may be placed to create...

The Surfcom 5000 is made by Zeiss and is accurate and fast with a universal body to make all surface measurements easier to operate with. This measures more surfaces in just one step...

The SURFCOM C5 is indicated for fully automatic roughness measurement on engine components and shafts. It assures quality products in volume production, and has the ability to...

The Zeiss Rondccm 41/31 with precision rotary table on air and analysis functions belongs in excellent machines such as Fourier analysis. used for measuring...

RONDCOM 54/44 RONDCOM 54 is a highly accurate form tester that features a wear-free rotary table mounted on air bearings with the accuracy of 20 nm and comes available in two versions SD...

{{productDetail[5693]}}

ZOLLER »genius 3« is the worldwide calculating appliance for metal slicing tools. From...

ZOLLER brings the best features out of hob cutters that are now characterized as fully automatic...

Whether opting for the three axis CNC version or the manual one, users will surely enjoy using this high-performance universal measuring machine, suitable for the majority...

Zoller's »pomDiaCheck« is an efficient and high-performance quality high-accuracy diameter calculation calibration device, utilized for fast process-related calculations with an accuracy...

{{productDetail[14539]}}

The MarSurf M 300 C cylindrical drive unit has a hand prism and a PHT pick-up. It is easy to use and has a color display with a measuring range up to 0.014 inches....

MarSurf XCR 20 employs the combination of contour and roughness software, each having their own interface. Mahr's top measurement system allows ease of use even...

The MarSurf XP 20 MarWin offers professional access to automated Surface Metrology. The user benefits in the production...

The MarForm MMQ 100 is characterized by touch screen user interface, fast workpiece alignment, fast and accurate measurement readings, touch screen...

The modular machine concept, as well as the wide variety of probes made available for this item are able to...

{{productDetail[9205]}}

The HRP-350 is an automatic, sophisticated surface outline topography metrology instrument, comprising maximum resolution/elevated-aspect ratio, stylus-derived surface outlining...

The HRP-250 is an automated, advanced surface topography metrology device that is specially designed with an enhanced resolution mode allowing precise control of nano-scale features of implementations...

{{productDetail[113449]}}

The scanner as calculating appliance: It is the most précised 2D examiner in the world today for dimensioning of two dimensional job parts. This first-rate matrix scanner is designed...

The Werth CNC ShaftScope is a shaft-calibrating device perfect for industrial-floor situations....

The Werth VideoCheck® V HA is an accurate, multi-sensor coordinate measuring machine designed to measure tools such as twist...

Werth Contour Probe WCP (patent pending) is an optical contour tracer that performs measurement of...

{{productDetail[6009]}}

Todays Rometer incorporates over 30 years of metals product experience and now benefits from the proven NDC TDi system platform. NDCs Total Distributed Intelligence (TDi) architecture creates a fully digital system that improves system speed, reduces system complexity and improves reliability. TDi also reduces installation and commissioning...

{{productDetail[26204]}}

The tube inspector is a non-contact tube measuring machine manufactured by BLM Group. It is used for 100% in-line inspection and control of designed tubes. It...

{{productDetail[6136]}}

Variable 3-disc indicating gages VD measure the circumferential backlash and that would be in relation to the maximum effective tolerance limit. For good measure...

The URM-K is a rotation inspection instrument engineered by Frenco. It is suitable for inspecting profiled components, such as profiled shafts.

The instrument is placed on the shop floor next...

{{productDetail[53323]}}

Our Drop shape Analyzer the DSA25 is simple to use, and is a reliable instrument for ascertaining the measurement of a contact angle. From the simple wetting test to the correct measurement of the surface and free energy, the strong instrument provides a flexible option...

DSAHT offers accurate high-temperature measurement of wetting based on contact angle and surface tension. Components like metals, glass or ceramics in molten form can be investigated using our DSAHT at actual process and working temperatures.

The high-quality,...

{{productDetail[14849]}}

The WMM Series, manufactured by Dr Schneider®, is a 3D multi sensor shaft machine that gives a smooth measurement of up to 200 mm for different...

WMM 300 / WMM 450 range of Shaft measurement device of a maximum of 450 mm and offers an extremely quick solution for accurate computation of axisymmetric products of 150 mm in diameter. It can also compute diameters,...

The innovative WMM 600-1200 series offers a measuring range of up to 1200 mm in length, and up to 400 mm in diameter. The device is well equipped with live-image-triggered...

{{productDetail[18961]}}

The PLu apex is an optical profiler used for gauging any optical surface from aspheric to flat or free-form. This is especially useful for measuring optics.

Its enhanced design, based on the...

{{productDetail[112777]}}

The manual machines with or without a base disk are a TECHNICAL ECONOMIC alternative for the measurement...

Measuring machines GMM 40, 70 and 110 automatic can be measure in quickly and easily condition with a single measuring cycle the...

{{productDetail[157377]}}

Machine TYPE 1″
Dimension range: Bearings Ø 20 180 mm. Height 4 40 mm.

Machine TYPE 2″
Dimension range: Bearings Ø 100 - 360 mm. Height 16 58 mm.

Performances:
- Ball presence check ( except for blind bearings)
- Blind bearings : it is possible to take the measurement, by positioning a small tool on the cage
- Measurement...

{{productDetail[30770]}}

The Form Talysurf PGI 420/820/1220 Series, manufactured by Taylor Hobson®, which is a surface profiler that measures rough, wavy and contoured curved...

Ultra precision bearing manufacturers need high specification instruments to be able to measure roughness, waviness and contour present on curved surfaces. Taylor Hobson offers two systems for applications...

The PGI series is a line of surface profilers manufactured by Taylor Hobson. It provides an efficient solution for all manufacturing industries.

The...

The Surface Profilers, manufactured by Taylor Hobson®, is a form talysurf inductive that is precise...

Form Talysurf Intra maintains the efficiency of measurement without the need for constant maintenance and support. Intra can measure the simple roughness parameters like Ra. This instrument has the higher level...

{{productDetail[7159]}}

With quick examination of sheet metal for precision and monitoring quality, Virtek® LaserQC®...

{{productDetail[55072]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation