Dyna Force is used to measure the retention force of a machine tool spindle. Low pulling force can cause a bad surface finish. A higher pulling force of your machine will enhance cutting performance. Dyna Force quickly measures the pulling ...
Precision Measuring of Tool Diameter and Runout Accuracy Dyna Line Portable eliminates machining defects by measuring total runout accuracy at high rotation speeds. Also usable as a maintenance/evaluation tool for runout accuracy of ...
Perfect partners for comparative, parallelism and radial runout tests on the machine or during the assembly Sturdy design - precise results Measuring tripods provide the basis for precise measuring results due to their stable design. ...
MAHR
The perfect starting point for reliable measurement results Test plates made of hard granite are the perfect surface for your height measurement instruments due to the plates’ high strength and dimensional stability.
MAHR
Measuring range: 0 in - 9 in
Patented "Channel Lock" design ensures parallelism across the entire adjustment range Adjustable centering stop Large, square hard metal measuring surface inclined to facilitate insertion of the testpieces All of the settings can be ...
MAHR
Industrial environments are much harsher and more time sensitive than traditional IT environments. Ethernet packets can be corrupted causing packet re-sends which increases latency which can disrupt communications resulting in production ...
Fluke Networks
The CertiFiber Pro Optical Loss Test Set improves the efficiency of fiber optics certification. The Taptive user interface simplifies set-up, eliminates errors and speeds troubleshooting. A set reference wizard ensures correct reference ...
Fluke Networks
The LinkIQ™ Cable+Network Tester is the testing solution to verify cable performance up to 10 Gb/s and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements and provides distance to ...
Fluke Networks
Multifunctional Installation Tester Installation tester for standards-compliant testing in electrical systems and installations in accordance with IEC 60364-6 (DIN VDE 0100-600), DIN EN 50110-1 (DIN VDE 0105-100), IEC 61851-1 (DIN ...
GOSSEN METRAWATT GmbH
The new installation testers included in the PROFITEST MF series are ideally matched to the electrician’s requirements and are specially designed for the implementation of electrical tests in installations and systems – day in, day out. The ...
GOSSEN METRAWATT GmbH
Test instrument with standards-compliant test sequences for testing the electrical safety of devices after repair and for periodic testing including IZYTRONIQ data processing software The SECUTESTST BASE provides all measuring and test ...
GOSSEN METRAWATT GmbH
Magnetic supports with articulated arm SPECIFICATIONS Material - Arm: light alloy Base: metal Function(s) - With switch to disengage the magnet Fine adjustment Included in delivery - Articulated ...
TESA
The reference probes, also called "dummy probes", are resistance dividers. Each probe simulates a given length very accurately. Reference probes are connected to the instrument instead of standard probes for checking or calibrating ...
TESA
Suction support with articulated arm SPECIFICATIONS Material - Arm: light alloy Base: metal Dimensions - Base: Ø 88 x 28 mm Function(s) - Suction controlled by lever switch Fine adjustment Included ...
TESA
The MI 3155 EurotestXD is the newest flagship of Metrel’s most advanced line of multi-functional measuring instruments. MEASURING FUNCTIONS • Live Transformer’s Impedance Measurement with Four Wire Test • Hi-precision Short Circuit ...
METREL
The MI 3290 Earth Analyser is a portable, battery or mains powered test instrument with excellent IP protection (IP 54 open case), intended for measurement of earth resistance, specific earth resistance and earth potential of various ...
METREL
The MI 3325 MultiServicerXD is a top-of-the-line multifunctional instrument covering diverse industrial applications, where ruggedness and reliability are a must. MEASURING FUNCTIONS • Continuity (2-wire & 4-wire), 0.2 A, 4 A, 10 ...
METREL
Introducing the PIX Collapsible Belt Length Measure The Ultimate Belt Measuring Tool #Collapsible Design: Our length measure features a smart collapsible design with three individual sub-modules. The reduced form factor allows you ...
DCCT Pro2 mains powered testers are ideal for the rapid and effective testing of porosity in non-conductive coatings. Incorporating a resettable high-speed counter, they are specifically designed for use within automated production processes. Used ...
Buckleys (UVRAL) Limited
DCCT Pro2 mains powered testers are ideal for the rapid and effective testing of porosity in non-conductive coatings. Incorporating a resettable high-speed counter, they are specifically designed for use within automated production processes. Used ...
Buckleys (UVRAL) Limited
DCCT Pro2 mains powered testers are ideal for the rapid and effective testing of porosity in non-conductive coatings. They are specifically designed for use within automated production processes. Used extensively in the manufacturing ...
Buckleys (UVRAL) Limited
The Apollo 600+ features a built-in camera for visual test records, a USB memory port for data transfer and a comprehensive range of electrical safety tests with user configurable test sequences and checklists for PAT, PPM and PPE. It ...
Seaward
More about the PV200 The PV200 is a compact & cost effective I-V curve tracer that uses simple push button operation making it an efficient and versatile tester for PV systems. 999 datasets can be stored on the instrument and once downloaded ...
Seaward
The PrimeTest 50 portable appliance tester is battery powered and handheld to allow for fast and efficient testing with clear PASS/FAIL indication. A simple range of tests are selected at the push of a button to test earthed equipment, ...
Seaward
Measuring range: 0 mm - 60 mm
Especially robust, ruggedised micrometers with flat-ground carbide measuring surfaces, without ratchet and with clamp and screw mount. Suitable for axial load up to 1000 N Extra robust design Clamping shaft with thread
Steinmeyer Holding GmbH
Fine adjustment for highest-precision setting of the smallest travel distances. Supplied with non-rotating thrust shaft and rounded measuring surfaces; with Ø 15 mm thimble. Differential movements of spindle threads and nuts allow ...
Steinmeyer Holding GmbH
• The use for non-alternating load direction / one-sided load • Can be configured individually according to the application scenario Technical data • Graduation 0,01 mm • Thread pitch 0,5 mm Customized versions • Different types ...
Steinmeyer Holding GmbH
Temperature: -90 °C - 220 °C
For tests requiring a passage to ambiant temperature By alternatively moving a product from a cold cabinet to a hot cabinet, Thermal Shock environmental chambers enable the temperature to vary very quickly on this product in order ...
The PCE-ERT 10 is a handy measuring instrument, which allows fast and easy determination of the earth resistance. The earthing device determines the earth resistance with three-wire technology in three measuring ranges up to 2000 Ω. By ...
PCE Deutschland GmbH
PCE Deutschland GmbH
The PCE-ERT 10 is a handy measuring instrument, which allows fast and easy determination of the earth resistance. The earthing device determines the earth resistance with three-wire technology in three measuring ranges up to 2000 Ω. By ...
PCE Deutschland GmbH
Based on TSI's established model 8130, currently the world's most-used filter tester, model 8130A now offers higher sensitivity and resolution - up to 99.9999 percent efficiency has been produced with Emery oil at concentrations of 200 ...
TSI
PRODUCT DETAILS TSI’s Automated Filter Testers have been used in quality control and manufacturing for more than 35 years. The model 8130A is used by the leading filter and filter media manufacturers, test laboratories, and government ...
TSI
The VelociCalc® Meter Model 9650 is used to measure HVAC system pressures and can be connected to pitot probes for performing duct traverses. It’s ergonomic design includes a probe holder and integrated magnets allowing for attachment ...
TSI
HV DAC-300 Test and diagnostics system for high voltage cables ■ Designed for testing and diagnostics on cables rated up to 230 kV ■ Multifunctional: cable withstand testing & PD diagnostics in a single system ■ Allows a monitored ...
Megger Germany GmbH & SebaKMT
HV DAC-200 Test and diagnostics system for high voltage cables ■ Designed for testing and diagnostics on cables rated up to 132 kV ■ Multifunctional: cable withstand testing & PD Diagnosis in a single system ■ Allows a monitored commissioning ...
Megger Germany GmbH & SebaKMT
VLF SINE 62 kV Test and diagnostics system for medium voltage cables ■ Performs cable withstand testing, cable diagnostics and sheath fault pinpointing ■ Smallest and lightest unit on the market in its class ■ Unique user-experience ...
Megger Germany GmbH & SebaKMT
Portable surface roughness testers – SA6200-SA6210-SA6220 Non destructive testing instruments employed to measure surface roughness. Simple and handy, the ability to measure different parameters makes it an instrument suitable to ...
S.A.M.A. ITALIA SRL
External probe surface roughness testers – SA6230 Non destructive testing instruments employed to measure surface roughness. Simple and handy, the ability to measure different parameters makes it the right instrument for operating ...
S.A.M.A. ITALIA SRL
Compact surface roughness tester – SA6240 Pocket portable surface roughness tester is a compact and incredibly sturdy device for accurate and reliable measurements on horizontal, vertical and inclined surfaces. Its integrated probe ...
S.A.M.A. ITALIA SRL
Pulse centralizing device to fully manage the consumption of any installation. It can send data to a higher-level SCADA system thanks to the line-TCPRS1 gateway, which incorporates Wi-Fi and Ethernet communications.
The CVM-D41 DC is a digital power analyzer for installing on a DIN rail. Its screens are operated using buttons to display different electrical parameters in a DC network of up to 1500 VDC, such as voltage, current, power and energy (A·h). This ...
• Determination of the magnetic properties of electrical steel in all common quality grades, thicknesses and geometries and of other soft magnetic materials • Quality control of strip steel, punched parts, stators, transformer or ring ...
Brockhaus
• Determination of the magnetic properties of electrical steel and other soft magnetic materials • Free configuring with specific measuring coil systems • Parallel connection of up to 12 measuring coil systems • Fully digitalized data ...
Brockhaus
• Determination of the magnetic properties of electrical steel and other soft magnetic materials • Free configuring with specific measuring coil systems • Parallel connection of up to12 measuring coil systems • Fully digitalized data ...
Brockhaus
The FF20 CT is the expert microCT system for R&D, defect analysis, or CT metrology. It is designed for inspections of very small components and objects in the electronics industry, material science, and other research areas. • Accurate ...
With its dual-tube configuration, the high-energy, high-resolution FF85 CT achieves extremely precise inspection results for a wide variety of material types and part sizes. • Extensive range of applications from microCT to high-energy ...
KRD40 series drop tester, mainly simulates the resistance to drop and impact of large and heavy packaging products. Its strong power system and unique sample holder facilitate easy loading and unloading of oversized and overweight items ...
CME Technology Co., Ltd.
KRD41 series small drop tester is suitable for free-fall test of small consumer electronics and components such as mobile phones, walkie-talkies, electronic dictionaries, CD / MD / MP3 and so on, applicable standards JISC 0044 and IEC ...
CME Technology Co., Ltd.
KRD42 series double lift zero drop tester is mainly suitable for large size packaging products to resist drop impact performance, its powerful power system and unique sample support for easy loading and unloading of oversized, overweight ...
CME Technology Co., Ltd.
A stand-alone, fully automatic high barrier oxygen transmission rate system. Ideal for those new to permeation testing while offering all the features and flexibility required by advanced users. The OX-TRAN 2/22 oxygen permeation instrument ...
AMETEK MOCON
OX-TRAN 2/40 OTR Analyzer for Packages The OX-TRAN 2/40 series is the next evolution in whole package testing for Oxygen Transmission Rate in controlled conditions. - Oxygen Permeation Analyzer - Packages & Film - ASTM D3985 - ...
AMETEK MOCON
Automated to Save You Time A stand alone fully automated water vapor transmission rate (WVTR) system. Ideal for those who need fast and accurate results. Easy to use for those new to permeation while offering the features needed for advanced ...
AMETEK MOCON
The temperature cycling tester is designed to determine the resistance of thermoplastic pipe network and connections consisting of stiff or flexible parts to alternating thermal shock. This applies to pipe systems intended to be used for ...
AHP PLASTIK MAKINA
The universal tensile tester is used for performing tension, pressure or bending tests. The classic application is the tensile test. This involves subjecting a sample to an increasing tensile load until it breaks. According to ISO 527 ...
AHP PLASTIK MAKINA
The falling weight tester is used to determine the external impact resistance of thermoplastic pipes using the staircase or round-the-clock method according to EN744. According to EN 744 , EN 1411 , ISO 3127 , ASTM D 2444 , digital height ...
AHP PLASTIK MAKINA
The SET CROSS HOLE SEISMIC is our set of instruments for borehole surveys specifically designed for a thorough geophysical investigation of the subsurface and for the measurement of seismic waves of compression and shear specifically ...
Reliable PD testing on electrical equipment Our MPD 800 universal partial discharge (PD) measurement and analysis system represents the next generation of our widely-used and innovative MPD PD testing technology. Enhanced and newly-added ...
OMICRON electronics
Ultra-high frequency partial discharge measurement and analysis system Our portable, easy-to-use UHF 800 system performs sensitive offline and online partial discharge (PD) measurement and analysis in the ultra-high frequency (UHF) range ...
OMICRON electronics
MONCABLO is a customizable, permanently-installed system for the continuous on-line monitoring of partial discharge (PD) activity in the electrical insulation of high-voltage cable systems, including cable terminations and joints. Advanced ...
OMICRON electronics
Smart_Projector_Double Pharma Double Magnification Video Measuring Instrument for Primary Pharmaceutical Packaging: Smart_Projector_Double Pharma allows automatic, objective, repeatable, easy and fast dimensional quality check of a wide ...
SmartVision S.r.l.
The best Price/Performance Digital Profile Projector “Easy_Projector the best price/performance video measuring machine for dimensional control” High Performances at a Low Price! This special line low cost, available in two models, ...
SmartVision S.r.l.
State-of-the-art of Uniformity & Polarization Tester according to Standards. Smart_Tester allows a complete Polarization Axis and Transmittance Uniformity Check for SunLenses, SunGlasses, Masks and SkiGoggles according to International ...
SmartVision S.r.l.
Test Device for Flammability of Plastics for Parts in Devices and Appliances in Accordance with UL 94, 5th and 6th Edition, DIN EN 60695 Part 11-10, DIN EN 60695 Part 11-20, DIN EN 60695 Part 11- 3, DIN EN 60695 Part 11-4, ISO 9772 ...
Please specify:
Help us improve:
remaining